Document Center List of Standards on Cans. Tins. Tubes Light Gauge Metal And Plastics Containers
ICS Code 55.120
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D5833 - Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans
- ASTM-F1615 - Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
BSI:
- BS-1133-10 - Packaging code. Metal containers
- BS-1133-10.1 - Packaging code. Metal containers
- BS-1262 - Metal packaging. Round lever-lid metal containers for surface coatings. Specification
- BS-1764 - Specification for Nominal Diameters of Round Built-Up Tins
- BS-2006 - Specification for aluminium collapsible tubes.
- BS-3130-4 - Glossary of packaging terms
- BS-5740 - Specification for oblong flat-top cans for liquid products
- BS-6499 - Metal screw necks, screw caps and inner seals for metal containers. Specification
- BS-7379 - Specification for plastics/metal laminate collapsible tubes
- BS-7921 - Cone top cans of nominal volumes 125 ml to 1000 ml for liquid products. Specification
- BS-EN-12374 - Packaging. Flexible tubes. Terminology
- BS-EN-12374-TC - Tracked Changes. Packaging. Flexible tubes. Terminology
- BS-EN-12375 - Packaging. Flexible aluminium tubes. Wall thickness determination method
- BS-EN-12377 - Packaging. Flexible tubes. Test method for the air tightness of closures
- BS-EN-13025 - Packaging. Light Gauge Metal Packaging. Nominal Filling Volumes for Round, Cylindrical
- BS-EN-13025-1 - Packaging. Light gauge metal containers
- BS-EN-13026 - Packaging. Light-gauge metal packaging. Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml
- BS-EN-13027 - Packaging. Light-gauge metal packaging. Open-top round cans defined by their nominal gross-lidded capacity
- BS-EN-13028 - Packaging. Light-gauge metal packaging. Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes
- BS-EN-13029 - Packaging. Light-gauge metal packaging. Apertures for plug-in plastic closures
- BS-EN-13045 - Packaging. Flexible cylindrical plastic tubes. Dimensions and tolerances
- BS-EN-13045-TC - Tracked Changes. Packaging. Flexible cylindrical plastic tubes. Dimensions and tolerances
- BS-EN-13046 - Packaging. Flexible cylindrical metallic tubes. Dimensions and tolerances
- BS-EN-13047 - Packaging. Flexible conical metallic tubes. Dimensions and tolerances
- BS-EN-13048 - Packaging. Flexible aluminium tubes. Internal lacquer film thickness measurement method
- BS-EN-13461 - Packaging. Cylindrical flexible laminated tubes. Dimensions and tolerances
- BS-EN-14391 - Packaging. Collapsible aluminium tubes. Tactile warnings of danger
- BS-EN-14401 - Rigid plastics containers. Methods to test the effectiveness of closures
- BS-EN-14979 - Packaging. Flexible plastic/metal laminate tubes. Dimensions and tolerances of nozzle S 13
- BS-EN-15384 - Packaging. Flexible aluminium tubes. Test method to determine the porosity of the internal coating
- BS-EN-15384-1 - Packaging. Test method to determine the porosity of the internal coating of flexible aluminium tubes
- BS-EN-15384-2 - Packaging. Test method to determine the porosity of the internal coating of flexible aluminium tubes
- BS-EN-15385 - Packaging. Flexible laminate tubes. Test methods to determine the strength of the head welding
- BS-EN-15386 - Packaging. Flexible laminate and plastic tubes. Test method to determine the print adhesion
- BS-EN-15387 - Packaging. Flexible laminate tubes. Test methods to assess the strength of the side seam
- BS-EN-15421 - Packaging. Flexible aluminium tubes. Determination of the adhesion of the internal and external protective lacquering
- BS-EN-15653 - Packaging. Flexible aluminium tubes. Test method to check the resistance of the internal protective coating against ammonia
- BS-EN-15766 - Packaging. Flexible aluminium tubes. Test methods to determine the polymerization of the internal coating with acetone
- BS-EN-16283 - Packaging. Flexible aluminium tubes. Test method to measure the force to pierce the membrane
- BS-EN-16284 - Packaging. Flexible laminate and plastic tubes. Test method to determine the adhesive strength of the membrane
- BS-EN-16285 - Packaging. Flexible aluminium tubes. Test method to measure the deformation of the aluminium tube body (Guillotine test)
- BS-EN-16285-TC - Tracked Changes. Packaging. Flexible aluminium tubes. Test method to measure the deformation of the aluminium tube body (Guillotine test)
- BS-EN-16565 - Packaging. Flexible tubes. Test method to determine the orientation of the flip-top cap
- BS-EN-17220 - Packaging. Flexible aluminium tubes. Tube nozzles
- BS-EN-868-8 - Packaging for terminally sterilized medical devices
- BS-EN-ISO-90-1 - Light gauge metal containers. Definitions and determination of dimensions and capacities. Open-top cans
- BS-EN-ISO-90-2 - Light gauge metal containers. Definitions and determination of dimensions and capacities. General use containers
- BS-EN-ISO-90-3 - Light gauge metal containers. Definitions and determination of dimensions and capacities
- BS-ISO-11944 - Round general use light gauge metal containers. Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity
- BS-ISO-24021-1 - Light gauge metal containers Vocabulary and classification
- PD-ISO-21985 - Light gauge metal containers. Non-refillable LPG cartridges. General requirements
ISO:
- ISO-10193 - General use light gauge metal containers -- Nominal filling volumes of round cylindrical and tapered containers of up to 40 000 ml
- ISO-10653 - Light-gauge metal containers -- Round open-top cans -- Cans defined by their nominal gross lidded capacities
- ISO-10654 - Light-gauge metal containers -- Round open-top cans -- Cans for liquid products with added gas, defined by their nominal filling volumes
- ISO-11761 - Light-gauge metal containers -- Round open-top cans -- Classification of can sizes by construction type
- ISO-11762 - Light-gauge metal containers -- Round open-top cans for liquid products with added gas -- Classification of can sizes by construction type
- ISO-11944 - Round general use light gauge metal containers -- Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity
- ISO-1361 - Light-gauge metal containers -- Round open-top cans -- Internal diameters
- ISO-21985 - Light gauge metal containers - Non-refillable LPG cartridges - General requirements
- ISO-24021-1 - Light gauge metal containers - Vocabulary and classification - Part 1: Open-top cans and ends
- ISO-5099 - Light gauge metal containers - Easy-open ends and peel-off ends - Classification and dimensions
- ISO-90 - Hermetically Sealed Metal Cans for Food & Drinks
- ISO-90-1 - Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 1: Open-top cans
- ISO-90-2 - Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 2: General use containers
Other SDOs:
- BS-EN-15421-TC - Tracked Changes. Packaging. Flexible aluminium tubes. Determination of the adhesion of the internal and external protective lacquering
- DIN-EN-13025-1 - Part 1: Nominal Filling Volumes for Round, Cylindrical & Tapered General Use Metal Con
- DIN-EN-14391 - Packaging, Collapsible Aluminium Tubes, Tactile Warnings of Danger
- DIN-EN-14401 - Rigid Plastics Containers, Methods To Test the Effectivenes of Closures
- DIN-EN-14979 - Packaging - Flexible Plastic/Metal Laminate Tubes - Dimensions & Tolerances of Nozzle
- EN-12374 - Packaging - Flexible Tubes - Terminology
- EN-12375 - Packaging - Flexible Aluminium Tubes - Wall Thickness Determination Method
- EN-12377 - Packaging - Flexible tubes - Test method for the air tightness of closures
- EN-13025-1 - Part 1: Nominal Filling Volumes for Round, Cylindrical & Tapered General Use Metal Con
- EN-13029 - Packaging - Light-Gauge Metal Packaging - Apertures for Plug-in Plastic Closures
- EN-13045 - Packaging - Flexible Cylindrical Plastic Tubes - Dimensions & Tolerances
- EN-13048 - Packaging - Flexible Aluminium Tubes - Internal Lacquer Film Thickness Measurement Met
- EN-13461 - Packaging - Cylindrical Flexible Laminated Tubes - Dimensions & Tolerances
- EN-14391 - Packaging, Collapsible Aluminium Tubes, Tactile Warnings of Danger
- EN-14401 - Rigid Plastics Containers, Methods To Test the Effectivenes of Closures
- EN-14979 - Packaging - Flexible Plastic/Metal Laminate Tubes - Dimensions & Tolerances of Nozzle
- EN-15384 - Packaging, Flexible Aluminium Tubes, Test Method To Determine the Porosity of the Inte
- EN-15384-1 - Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test
- EN-15384-2 - Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test
- EN-15385 - Packaging - Flexible Laminate Tubes - Test Methods To Determine the Strength of the He
- EN-15386 - Packaging - Flexible Laminate & Plastic Tubes - Test Method To Determine the Print Ad
- EN-15387 - Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam
- EN-15421 - Packaging, Flexible Aluminium Tubes, Determination of the Adhesion of the Internal & E
- EN-15653 - Packaging - Flexible Aluminium Tubes - Test Method To Check the Resistance of the Int
- EN-15766 - Packaging - Flexible Aluminium Tubes - Test Methods To Determine the Polymerization Of
- EN-16283 - Packaging - Flexible aluminium tubes - Test method to measure the force to pierce the membrane
- EN-16284 - Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
- EN-16285 - Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)
- EN-16565 - Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap
- EN-868-8 - Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
- EN-ISO-90-1 - Light Gauge Metal Containers - Definitions & Determination of Dimensions & Capacities
- EN-ISO-90-2 - Light Gauge Metal Containers - Definitions & Determination of Dimensions & Capacities
- EN-ISO-90-3 - Part 3: Aerosol Cans, Light Gauge Metal Containers - Definitions & Determination of Di
- SS-EN-12374 - Packaging - Flexible tubes - Terminology
- SS-EN-12375 - Packaging - Flexible aluminium tubes - Wall thickness determination method
- SS-EN-12377 - Packaging - Flexible tubes - Test method for the air tightness of closures
- SS-EN-13025 - Packaging - Light gauge metal packaging - Nominal filling volumes for round cylindrical and tapered general use metal containers up to 40 000 ml
- SS-EN-13025-1 - Packaging - Light gauge metal containers - Part 1: nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml
- SS-EN-13025-2 - Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20, 25 and 30 l
- SS-EN-13025-3 - Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20, 25 and 30 l
- SS-EN-13026 - Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml
- SS-EN-13027 - Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity
- SS-EN-13028 - Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes
- SS-EN-13029 - Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures
- SS-EN-13045 - Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- SS-EN-13046 - Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances
- SS-EN-13047 - Packaging - Flexible conical metallic tubes - Dimensions and tolerances
- SS-EN-13048 - Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method
- SS-EN-13461 - Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances
- SS-EN-14391 - Packaging - Collapsible aluminium tubes - Tactile warnings of danger
- SS-EN-14401 - Rigid plastics containers - Methods to test the effectiveness of closures
- SS-EN-14979 - Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13
- SS-EN-15384 - Packaging - Flexible aluminium tubes - Test method to determine the porosity of the internal coating
- SS-EN-15384-1 - Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test
- SS-EN-15384-2 - Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test
- SS-EN-15385 - Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding
- SS-EN-15386 - Packaging - Flexible laminate and plastic tubes - Test method to determine the print adhesion
- SS-EN-15387 - Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam
- SS-EN-15421 - Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering
- SS-EN-15653 - Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia
- SS-EN-15766 - Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone
- SS-EN-16283 - Packaging - Flexible aluminium tubes - Test method to measure the force to pierce the membrane
- SS-EN-16284 - Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
- SS-EN-16285 - Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)
- SS-EN-16565 - Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap
- SS-EN-17220 - Packaging - Flexible aluminium tubes - Tube nozzles
- SS-EN-20090-1 - Light gauge metal containers - Definitions and determination methods f"r dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1986)
- SS-EN-20090-2 - Light gauge metal containers - Definitions and determination methods for dimensions and capacities - Part 2: General use containers (ISO 90-2:1986)
- SS-EN-20090-3 - Light gauge metal containers - Definitions and determination methods for dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:1986)
- SS-EN-868-8 - Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
- SS-EN-ISO-90-1 - Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997)
- SS-EN-ISO-90-2 - Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers (ISO 90-2:1997)
- SS-EN-ISO-90-3 - Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000)