Document Center List of Standards on Barrels. Drums. Canisters Containers Mainly For Transportation Of Fluids, Including Also Casks, Pails, Large Tin Cans For Shipping Materials, Etc. Fluid Storage Devices, See 23.020
ICS Code 55.140
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D5571 - Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tight-head Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
- ASTM-D5743 - Standard Practice for Sampling Single or Multilayered Liquids, with or Without Solids, in Drums or Similar Containers
- ASTM-D5998 - Standard Specification for Molded Polyethylene Shipping and Storage Drums
- ASTM-D997 - Drop Test for Loaded Cylindrical Containers, Standard Test Method For
- ASTM-ES8 - Specification for Portable Kerosine Containers for Consumer Use (Withdrawn 1988)
- ASTM-ES9 - Practice for the Cautionary Labeling of Portable Kerosine Containers for Consumer Use (Withdrawn 1988)
- ASTM-F2874 - Standard Specification for One Time Use Portable Emergency Fuel Containers (PEFC) for Use by Consumers
- ASTM-F3326 - Standard Specification for Flame Mitigation Devices on Portable Fuel Containers
- ASTM-F670 - Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing
- ASTM-F839 - Standard Specification for Cautionary Labeling of Portable Gasoline, Kerosene, and Diesel Containers for Consumer Use
- ASTM-F852 - Standard Specification for Portable Gasoline Containers for Consumer Use (Withdrawn 2017)
- ASTM-F926 - Standard Specification for Cautionary Labeling of Portable Kerosine and Diesel Containers for Consumer Use (Withdrawn 2014)
- ASTM-F976 - Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use (Withdrawn 2017)
BSI:
- BS-1133-10.2 - Packaging code. Metal containers. Metal drums
- BS-1133-7.4 - Fibreboard Drums
- BS-1596 - Specification for fibreboard drums
- BS-1702 - Specification for mild steel drums (heavy duty - fixed ends)
- BS-2003 - Specification for mild steel drums (light duty: removable heads)
- BS-2003-1 - Mild steel drums (light duty: removable heads). Specification for drums with a total capacity of 213 litres
- BS-814-1 - Mild steel and tinplate drums (light duty: fixed ends)
- BS-EN-12707 - Plastics drums. Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l
- BS-EN-12708 - Plug/bung closure systems for plastics containers with a nominal capacity of 20 l to 225 l
- BS-EN-12709 - Plastic drums. Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l
- BS-EN-12710 - Fibreboard drums. Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l
- BS-EN-12711 - Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 230 l
- BS-EN-12712 - Plastics jerricans. Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm
- BS-EN-12713 - Screw cap closure systems for plastics containers with a nominal capacity of 20 L to 60 L
- BS-EN-12714 - Plastics drums. Removable head (open head) drums with a nominal capacity of 25 L to 60 L
- BS-EN-12928 - Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l
- BS-EN-13007 - Steel drums. Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l
- BS-EN-13008 - Steel drums. Removable head (open head) drums with a nominal capacity of 15 l to 62 l
- BS-EN-13025-1 - Packaging. Light gauge metal containers
- BS-EN-13025-2 - Packaging. Light gauge metal containers
- BS-EN-13025-3 - Packaging. Light gauge metal containers
- BS-EN-14768 - Fibreboard drums. Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l
- BS-EN-209 - Steel drums. Removable head (open head) drums with a minimum total capacity of 210 l
- BS-EN-210 - Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 216,5 l
- BS-EN-ISO-15750-1 - Packaging. Steel drums
- BS-EN-ISO-15750-2 - Packaging. Steel drums
- BS-EN-ISO-15750-3 - Packaging. Steel drums
- BS-EN-ISO-15750-3-TC - Tracked Changes. Packaging. Steel drums
- BS-EN-ISO-16101 - Packaging. Transport packaging for dangerous goods. Plastics compatibility testing
- BS-EN-ISO-20848-1 - Packaging. Plastics drums
- BS-EN-ISO-20848-2 - Packaging. Plastics drums
- BS-EN-ISO-20848-3 - Packaging. Plastics drums
- BS-ISO-13106 - Plastics. Blow-moulded polypropylene containers for packaging of liquid foodstuffs
- BS-ISO-15750-1 - Part 1: Removable Head (Open Head) Drums With a Minimum Total Capacity of 208 I, 210 I
- BS-ISO-15750-3 - Part 3: Inserted Flange-Type Closure Systems
- BS-ISO-20848-1 - Packaging, Plastics Drums, Removable Head (Open Head) Drums With a Nominal Capacity O
- BS-ISO-20848-2 - Packaging, Plastics Drums, Non-Removable Head (Tight Head) Drums With a Nominal Capaci
- BS-ISO-20848-3 - Packaging, Plastics Drums, Plug/Bungs Closure Systems for Plastics Drums With a Nomina
- PAS-1008 - Specification for the performance and testing of a single-use flexitank
- PAS-1008-TC - Tracked Changes. Specification for the performance and testing of a single-use flexitank
ISO:
- ISO-13106 - Plastics - Blow-moulded polypropylene containers for packaging of liquid foodstuffs
- ISO-15750-1 - Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l
- ISO-15750-2 - Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l
- ISO-15750-3 - Packaging - Steel drums - Part 3: Inserted flange-type closure systems
- ISO-20848-1 - Packaging - Plastics drums - Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l
- ISO-20848-2 - Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l
- ISO-20848-3 - Packaging - Plastics drums - Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l
Other SDOs:
- DIN-EN-12710 - Fibreboard Drums - Removable Head (Open Head) Drums With Closing Rings With a Nominal
- DIN-EN-13025-1 - Part 1: Nominal Filling Volumes for Round, Cylindrical & Tapered General Use Metal Con
- DIN-EN-13025-2 - Part 2: Non-Removable Head (Tight Head) Round Steel & Tinplate Containers With a Nomin
- DIN-EN-13025-3 - Part 3: Removable Head (Open Head) Round Steel & Tinplate Containers With a Nominal Ca
- DIN-EN-14768 - Fibreboard Drums, Removable Head (Open Head) Drums With Slip on Lids With a Nominal Ca
- DIN-EN-ISO-16101 - Packaging, Transport Packaging for Dangerous Goods, Plastics Compatibility Testing
- EN-12707 - Plastic Drums - Non-Removable Head (Tight Head) Drums With a Nominal Capacity of 210 I
- EN-12708 - Plug/Bung Closure Systems for Plastics Containers With a Nominal Capacity of 20 I 225
- EN-12710 - Fibreboard Drums - Removable Head (Open Head) Drums With Closing Rings With a Nominal
- EN-12714 - Plastics Drums - Removable Head (Open Head) Drums With a Nominal Capcity of 25 I To 60
- EN-13025-1 - Part 1: Nominal Filling Volumes for Round, Cylindrical & Tapered General Use Metal Con
- EN-13025-2 - Part 2: Non-Removable Head (Tight Head) Round Steel & Tinplate Containers With a Nomin
- EN-13025-3 - Part 3: Removable Head (Open Head) Round Steel & Tinplate Containers With a Nominal Ca
- EN-14768 - Fibreboard Drums, Removable Head (Open Head) Drums With Slip on Lids With a Nominal Ca
- EN-ISO-15750-1 - Packaging, Steel Drums, Removable Head (Open Head) Drums With a Minimum Total Capacity
- EN-ISO-15750-2 - Packaging, Steel Drums, Non-Removable Head (Tight Head) Drums With a Minimum Total Cap
- EN-ISO-15750-3 - Packaging, Steel Drums, Inserted Flange-Type Closure Systems
- EN-ISO-20848-1 - Packaging, Plastics Drums, Removable Head (Pen Head) Drums With a Nominal Capacity Of
- EN-ISO-20848-2 - Packaging, Plastics Drums, Non-Removable Head (Tight Head) Drums With a Nominal Capaci
- EN-ISO-20848-3 - Packaging, Plastics Drums, Plug/Bung Closure Systems for Plastics Drums With a Nominal
- JIS-Z-1600 - Open Head Steel Drums
- JIS-Z-1601 - Tight Head Steel Drums
- SS-EN-12707 - Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l
- SS-EN-12708 - Plug/bung closure systems for plastics containers with a nominal capacity of 20 l to 225 l
- SS-EN-12709 - Plastic drums - Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l
- SS-EN-12710 - Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l
- SS-EN-12711 - Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 230 l
- SS-EN-12712 - Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm
- SS-EN-12713 - Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l
- SS-EN-12714 - Plastic drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L
- SS-EN-12928 - Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l
- SS-EN-13007 - Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l
- SS-EN-13008 - Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l
- SS-EN-13025-1 - Packaging - Light gauge metal containers - Part 1: nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml
- SS-EN-13025-2 - Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20, 25 and 30 l
- SS-EN-13025-3 - Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20, 25 and 30 l
- SS-EN-13972 - Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity
- SS-EN-13973 - Rigid plastics containers - Method for determination of drainability
- SS-EN-13974 - Rigid plastic containers - Specification of tolerance for dimensions, weight and volume
- SS-EN-14768 - Fibreboard drums - Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l
- SS-EN-209 - Steel drums - Removable head (open head) drums with a minimum total capacity of 210 l
- SS-EN-210 - Steel drums - Removable head (open head) drums with a minimum total capacity of 210 l
- SS-EN-ISO-15750-1 - Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l (ISO 15750-1:2002)
- SS-EN-ISO-15750-2 - Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l (ISO 15750-2:2002)
- SS-EN-ISO-15750-3 - Packaging - Steel drums - Part 3: Inserted flange-type closure systems (ISO 15750-3:2022)
- SS-EN-ISO-20848-1 - Packaging - Plastics drums - Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-1:2006)
- SS-EN-ISO-20848-2 - Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l (ISO 20848-2:2006)
- SS-EN-ISO-20848-3 - Packaging - Plastics drums - Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-3:2018)