Document Center List of Standards on Yarns Including Plied Yarns, Textured Yarns, Threads
ICS Code 59.080.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D1059 - Standard Test Method for Yarn Number Based on Short-Length Specimens
- ASTM-D1244 - Standard Practice for Designation of Yarn Construction
- ASTM-D1422 - Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method
- ASTM-D1423 - Standard Test Method for Twist in Yarns by Direct-Counting
- ASTM-D1907 - Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
- ASTM-D204 - Standard Test Methods for Sewing Threads
- ASTM-D2101 - Test Method for Tensile Properties of Single Man-Made Textile Fibers Taken from Yarns and Tows (Withdrawn 1995)
- ASTM-D2255 - Standard Test Method for Grading Spun Yarns for Appearance
- ASTM-D2256 - Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
- ASTM-D2257 - Standard Test Method for Extractable Matter in Textiles
- ASTM-D2258 - Standard Practice for Sampling Yarn for Testing
- ASTM-D2259 - Standard Test Method for Shrinkage of Yarns
- ASTM-D2260 - Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems
- ASTM-D2494 - Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow
- ASTM-D2591 - Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
- ASTM-D2644 - Standard Tolerances for Yarns Spun on the Woolen System
- ASTM-D2653 - Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
- ASTM-D2678 - Recommended Practice for Spinning Tests on the Cotton System for Measurement of Yarn Properties (Withdrawn 1990)
- ASTM-D2731 - Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
- ASTM-D3106 - Standard Test Method for Permanent Deformation of Elastomeric Yarns
- ASTM-D3108 - Standard Test Method for Coefficient of Friction, Yarn to Solid Material
- ASTM-D3412 - Standard Test Method for Coefficient of Friction, Yarn to Yarn
- ASTM-D3693 - Standard Specification for Labeled Length per Holder of Sewing Thread
- ASTM-D3823 - Standard Practice for Determining Ticket Numbers for Sewing Threads
- ASTM-D4031 - Standard Test Method for Bulk Properties of Textured Yarns
- ASTM-D4120 - Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests
- ASTM-D434 - Standard Test Method for Resistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam (Withdrawn 2004)
- ASTM-D4724 - Standard Test Method for Entanglements in Untwisted Filament Yarns by Needle Insertion
- ASTM-D4849 - Standard Terminology Related to Yarns and Fibers
- ASTM-D4911 - Standard Tolerances for Yarns Made of Man-Made Fibers and Spun on the Parallel Worsted or Modified Worsted System (Withdrawn 2000)
- ASTM-D4974 - Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
- ASTM-D5344 - Standard Test Method for Extension Force of Partially Oriented Yarn
- ASTM-D5647 - Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus
- ASTM-D6197 - Standard Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests
- ASTM-D6587 - Standard Test Method for Yarn Number Using Automatic Tester
- ASTM-D6611 - Standard Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance
- ASTM-D6612 - Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester
- ASTM-D6613 - Standard Practice for Determining the Presence of Sizing in Nylon or Polyester Fabric
- ASTM-D6717 - Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
- ASTM-D6720 - Standard Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method)
- ASTM-D6774 - Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
- ASTM-D681 - Standard Specification for Jute Rove and Plied Yarn for Electrical and Packing Purposes (Withdrawn 2000)
- ASTM-D7025 - Standard Test Method for Assessing Clean Flax Fiber Fineness
- ASTM-D7267 - Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering
- ASTM-D7269 - Standard Test Methods for Tensile Testing of Aramid Yarns
- ASTM-D7409 - Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
- ASTM-D861 - Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns
- ASTM-E3151 - Standard Test Method for Determining Antimicrobial Activity and Biofilm Resistance Properties of Tube, Yarn, or Fiber Specimens
BSI:
- BS-1932-2 - Testing the strength of yarns and threads from packages
- BS-2085 - Method of test for determination of twist in yarns, direct counting method
- BS-3543 - Specification for agricultural baler twines made from sisal and polyolefin for automatic pick-up balers and similar machines
- BS-4032 - Method of test for the determination of certain water- or alkali-soluble additives in cellulosic or synthetic fibres, yarns and fabrics or yarns and fabrics made from blends of such fibres
- BS-4134 - Method for designation of ticket numbers of industrial sewing threads
- BS-4611 - Methods of test for polyolefin tape yarns
- BS-4881 - Specification for polypropylene film cords, lines and twines
- BS-4985 - Conversion table for replacing traditional yarn numbers by rounded values in the Tex System
- BS-6125 - Specification for natural fibre cords, lines and twines
- BS-6189 - Glossary of terms relating to fabrics and associated fibres, yarns and processes
- BS-6663 - Methods for determination of crimp rigidity of textured nylon yarns
- BS-7318 - Specification for industrial sewing threads made from linen (flax) or cotton
- BS-946 - Method for the designation of yarns
- BS-984 - Method for determination of net mass of retail packages of knitting and rug yarns
- BS-EN-12422 - Sisal twines
- BS-EN-12423 - Polypropylene twines
- BS-EN-12562 - Textiles. Para-aramid multifilament yarns. Test methods
- BS-EN-12590 - Textiles. Industrial sewing threads made wholly or partly form synthetic fibres
- BS-EN-12751 - Textiles. Sampling of fibres, yarns and fabrics for testing
- BS-EN-14621 - Textiles. Multifilament yarns. Methods of test for textured or non-textured filament yarns
- BS-EN-25080 - Sisal agricultural twines
- BS-EN-IEC-63203-201-1 - Wearable electronic devices and technologies
- BS-EN-ISO-2061 - Textiles. Determination of twist in yarns. Direct counting method
- BS-EN-ISO-2061-TC - Tracked Changes. Textiles. Determination of twist in yarns. Direct counting method
- BS-EN-ISO-2062 - Textiles. Yarns from packages. Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
- BS-ISO-10290-TC - Tracked Changes. Textiles. Cotton yarns. Basis for specification
- BS-ISO-17202 - Textiles. Determination of twist in single spun yarns. Untwist/retwist method
- BS-ISO-18066 - Textiles. Manmade filament yarns. Determination of shrinkage in boiling water
- BS-ISO-18067 - Textiles. Synthetic filament yarns. Determination of shrinkage in dry-hot air (after treatment)
- BS-ISO-6741-1 - Textiles. Fibres and yarns. Determination of commercial mass of consignments
- BS-ISO-6741-2 - Textiles. Fibres and yarns. Determination of commercial mass of consignments
- BS-ISO-6741-3 - Textiles. Fibres and yarns. Determination of commercial mass of consignments
- BS-ISO-6939 - Textiles. Yarns from packages. Method of test for breaking strength of yarn by the skein method
IEC:
ISO:
- ISO-10132 - Textiles -- Textured filament yarn -- Definitions
- ISO-10290 - Textiles - Cotton yarns - Basis for specification
- ISO-1139 - Textiles -- Designation of yarns
- ISO-17202 - Textiles - Determination of twist in single spun yarns - Untwist/retwist method
- ISO-18066 - Textiles - Manmade filament yarns - Determination of shrinkage in boiling water
- ISO-18067 - Textiles - Synthetic filament yarns - Determination of shrinkage in dry-hot air (after treatment)
- ISO-2 - Textiles -- Designation of the direction of twist in yarns and related products
- ISO-2060 - Textiles -- Yarn from packages -- Determination of linear density (mass per unit length) by the skein method
- ISO-2061 - Textiles - Determination of twist in yarns - Direct counting method
- ISO-2062 - Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
- ISO-23733 - Textiles - Chenille yarns - Test method for the determination of linear density
- ISO-24180 - Textiles - Synthetic filament yarns - Electrostatic propensity evaluation by measuring electrical resistance
- ISO-6741-1 - Textiles -- Fibres and yarns -- Determination of commercial mass of consignments -- Part 1: Mass determination and calculations
- ISO-6741-2 - Textiles -- Fibres and yarns -- Determination of commercial mass of consignments -- Part 2: Methods for obtaining laboratory samples
- ISO-6741-3 - Textiles -- Fibres and yarns -- Determination of commercial mass of consignments -- Part 3: Specimen cleaning procedures
- ISO-6939 - Textiles -- Yarns from packages -- Method of test for breaking strength of yarn by the skein method
- ISO-8159 - Textiles -- Morphology of fibres and yarns -- Vocabulary
- ISO-8160 - Textiles -- Textured filament yarns -- Vocabulary
Other SDOs:
- DIN-EN-14621 - Textiles - Multifilament Yarns - Methods of Test for Textured or Non-Textured Filament
- EN-12590 - Textiles - Industrial Sewing Threads Made Wholly or Partly From Synthetic Fibres
- EN-12751 - Textiles - Sampling of Fibres, Yarns & Fabrics for Testing
- EN-14621 - Textiles - Multifilament Yarns - Methods of Test for Textured or Non-Textured Filament
- EN-ISO-2061 - Textiles - Determination of twist in yarns - Direct counting method
- EN-ISO-2062 - Textiles, Yarns From Packages, Determination of Single-End Breaking Force & Elongation
- SS-251014 - Textiles - Designation of yarns
- SS-251260 - Textiles - Designation of the direction of twist in yarns and related products
- SS-EN-12422 - Sisal twines
- SS-EN-12423 - Polypropylene twines
- SS-EN-12562 - Textiles - Para-aramid multifilament yarns - Test methods
- SS-EN-12590 - Textiles - Industrial sewing threads made wholly or partly from synthetic fibres
- SS-EN-12751 - Textiles - Sampling of fibres, yarns and fabrics for testing
- SS-EN-13895 - Textiles - Monofilaments - Determination of tensile properties
- SS-EN-14621 - Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
- SS-EN-ISO-2060 - Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skeinmethod (ISO 2060:1994)
- SS-EN-ISO-2061 - Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:2015)
- SS-EN-ISO-2062 - Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester (ISO 2062:2009)
- SS-ISO-10132 - Textiles - Textured filament yarn - Definitions (ISO 10132:1993, IDT)
- SS-ISO-1890 - Textile glass - Continuous filament and staple fibre yarns - Determination of twist
- SS-ISO-23733 - Textiles - Chenille yarns - Test method for the determination of linear density (ISO 23733:2007, IDT)
- SS-ISO-6741-1 - Textiles - Fibres and yarns - Determination of commercial mass of consignments - Part 1: Mass determination and calculations
- SS-ISO-6741-2 - Textiles - Fibres and yarns - Determination of commercial mass of consignments - Part 2: Methods for obtaining laboratory samples
- SS-ISO-6741-3 - Textiles - Fibres and yarns - Determination of commercial mass of consignments - Part 3: Specimen cleaning procedures
- SS-ISO/TR-6741-4 - Textiles - Fibres and yarns - Determination of commercial mass of consignments - Part 4: Values used for the commercial allowances and the commercialmoisture regains