Document Center List of Standards on Footwear Including Shoelaces Protective Footwear, See 13.340.50
ICS Code 61.060
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D2099 - Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
- ASTM-D3851 - Standard Specification for Microcellular Polyurethane Shoe Soling Materials
- ASTM-D6205 - Standard Practice for Calibration of the James Static Coefficient of Friction Machine
- ASTM-D8041 - Standard Test Method for Whole Boot Breathability (MVTR)
- ASTM-F1240 - Standard Guide for Ranking Footwear Bottom Materials on Contaminated Walkway Surfaces According to Slip Resistance Test Results (Withdrawn 2018)
- ASTM-F1614 - Footwear, Athletic, Shock Attenuating Properties of Material Systems, Standard Test Method for
- ASTM-F1677 - Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST) (Withdrawn 2006)
- ASTM-F1678 - Standard Test Method for Using a Portable Articulated Strut Slip Tester (PAST) (Withdrawn 2005)
- ASTM-F1679 - Standard Test Method for Using a Variable Incidence Tribometer (VIT) (Withdrawn 2006)
- ASTM-F1833 - Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
- ASTM-F1900 - Standard Test Method for Water Resistance of Footwear Using a Walking Step Simulator
- ASTM-F1976 - Standard Test Method for Impact Attenuation of Athletic Shoe Cushioning Systems and Materials (Withdrawn 2022)
- ASTM-F2232 - Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear
- ASTM-F2333 - Standard Test Method for Traction Characteristics of the Athletic Shoe–Sports Surface Interface
- ASTM-F2913 - Standard Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester
- ASTM-F539 - Standard Practice for Fitting Athletic Footwear
- ASTM-F609 - Standard Test Method for Using a Horizontal Pull Slipmeter (HPS) (Withdrawn 2022)
- ASTM-F694 - Standard Test Method for Heel-Attaching Strength of Women's Shoes (Withdrawn 2008)
- ASTM-F695 - Standard Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials (Withdrawn 2018)
BSI:
- BS-5131-4.18 - Longitudinal Stiffness of Steel Shanks
- BS-5131-4.2 - Methods of test for footwear and footwear materials. Other components
- BS-5131-4.20 - Methods of test for footwear and footwear materials. Other components. Force required to pull heel pins out of shoe heels
- BS-5131-4.9 - Methods of test for footwear and footwear materials. Other components. Fatigue resistance of heels of ladies' shoes
- BS-5462-1 - Footwear with midsole protection. Specification for lined vulcanized rubber footwear with penetration resistant midsoles
- BS-5462-2 - Footwear with midsole protection. Specification for lined or unlined polyvinyl chloride (PVC) footwear with penetration resistant midsoles
- BS-5943 - Methods for measurement and recording for orthopaedic footwear
- BS-7141-6 - Narrow fabrics
- BS-EN-12044 - Footwear, leather and imitation leather goods manufacturing machines. Cutting and punching machines. Safety requirements
- BS-EN-12222 - Footwear. Standard atmospheres for conditioning and testing of footwear and components for footwear
- BS-EN-12387 - Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements
- BS-EN-12653 - Footwear, leather and imitation leather manufacturing machines. Nailing machines. Safety requirements
- BS-EN-12743 - Footwear. Test methods for outsoles. Compression energy
- BS-EN-12744 - Footwear. Test methods for insoles. Delamination resistance
- BS-EN-12745 - Footwear. Test methods for insoles. Pin holding strength
- BS-EN-12746 - Footwear. Test methods for insoles and insocks. Water absorption and desorption
- BS-EN-12747 - Footwear. Test methods for insoles. Abrasion resistance
- BS-EN-12748 - Footwear - Test Methods for Outsoles, Insoles, Linings & Insocks - Water Soluble Conte
- BS-EN-12749 - Footwear. Ageing conditioning
- BS-EN-12770 - Footwear. Test methods for outsoles. Abrasion resistance
- BS-EN-12771 - Footwear. Test methods for outsoles. Tear strength
- BS-EN-12772 - Footwear. Test methods for outsoles. Dimensional stability
- BS-EN-12773 - Footwear. Test methods for outsoles. Needle tear strength
- BS-EN-12774 - Footwear. Test methods for outsoles. Determination of split tear strength and delamination resistance
- BS-EN-12782 - Footwear. Test methods for insoles. Resistance to stitch tear
- BS-EN-12784 - Footwear - Test Methods for the Whole Shoe - Thermal Insulation
- BS-EN-12785 - Footwear. Test methods for whole shoe. Heel attachment
- BS-EN-12800 - Footwear. Test methods for insoles. Dimensional stability
- BS-EN-12801 - Footwear. Test methods for insoles, lining and insocks. Perspiration resistance
- BS-EN-12803 - Footwear. Test methods for outsoles. Tensile strength and elongation
- BS-EN-12826 - Footwear. Test methods for lining and insocks. Static friction
- BS-EN-12940 - Footwear manufacturing wastes. Waste classification and management
- BS-EN-12958 - Footwear. Test methods for shanks. Fatigue resistance
- BS-EN-12959 - Footwear. Test methods for shanks. Longitudinal stiffness
- BS-EN-12961 - Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives
- BS-EN-13073 - Footwear. Test methods for whole shoe. Water resistance
- BS-EN-13400 - Footwear. Sampling location, preparation and duration of conditioning of samples and test pieces
- BS-EN-13457 - Footwear, leather and imitation leather goods manufacturing machines. Splitting, skiving, cutting, cementing and cement drying machines. Safety requirements
- BS-EN-13511 - Footwear, Test Methods for Uppers, Resistance To Damage on Lasting
- BS-EN-13512 - Footwear. Test methods for uppers and lining. Flex resistance
- BS-EN-13513 - Footwear, Test Methods for Uppers, Deformability
- BS-EN-13514 - Footwear. Test methods for uppers. Delamination resistance
- BS-EN-13515 - Footwear. Test methods for uppers and lining. Water vapour permeability and absorption
- BS-EN-13516 - Footwear, Test Methods for Uppers, Lining & Insocks, Colour Fastness To Rubbing
- BS-EN-13517 - Footwear. Test methods for uppers, linings and insocks. Colour migration
- BS-EN-13518 - Footwear. Test methods for uppers. Water resistance
- BS-EN-13519 - Footwear. Test methods for uppers. High temperature behaviour
- BS-EN-13520 - Footwear. Test methods for uppers, lining and insocks. Abrasion resistance
- BS-EN-13521 - Footwear. Test methods for uppers, lining and insocks. Thermal insulation
- BS-EN-13522 - Footwear. Test methods for uppers. Tensile strength and elongation
- BS-EN-13571 - Footwear. Test methods for uppers, lining and insocks. Tear strength
- BS-EN-13572 - Footwear. Test methods for uppers, lining and insocks. Seam strength
- BS-EN-13770 - Textiles. Determination of the abrasion resistance of knitted footwear garments
- BS-EN-1391 - Adhesives for Leather & Footwear Materials - a Method for Evaluating the Bondability O
- BS-EN-1392 - Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions
- BS-EN-14294 - Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes
- BS-EN-14602 - Footwear. Test methods for the assessment of ecological criteria
- BS-EN-15307 - Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements
- BS-EN-1845 - Footwear manufacturing machines. Footwear moulding machines. Safety requirements
- BS-EN-522 - Adhesives for Leather & Footwear Materials, Bond Strength - Minimum Requirements & Ad
- BS-EN-IEC-61340-4-5-TC - Tracked Changes. Electrostatics
- BS-EN-ISO-10717 - Footwear. Test method for slide fasteners. Burst strength
- BS-EN-ISO-10734 - Footwear. Test method for slide fasteners. Strength of slide fastener pullers
- BS-EN-ISO-10750 - Footwear. Test method for slide fasteners. Attachment strength of end stops
- BS-EN-ISO-10751 - Footwear. Test methods for slide fasteners. Resistance to repeated opening and closing
- BS-EN-ISO-10764 - Footwear. Test methods for slide fasteners. Lateral strength
- BS-EN-ISO-10765 - Footwear. Test method for the characterization of elastic materials. Tensile performance
- BS-EN-ISO-10768 - Footwear. Test method for the determination of the resistance of elastic materials for footwear to repeated extension. Fatigue resistance
- BS-EN-ISO-16177 - Footwear. Resistance to crack initiation and growth. Belt flex method
- BS-EN-ISO-16181-1 - Footwear. Critical substances potentially present in footwear and footwear components
- BS-EN-ISO-16181-2 - Footwear. Critical substances potentially present in footwear and footwear components
- BS-EN-ISO-16186-TC - Tracked Changes. Footwear. Critical substances potentially present in footwear and footwear components. Determination of dimethyl fumarat (DMFU)
- BS-EN-ISO-16187 - Footwear and footwear components. Test method to assess antibacterial activity
- BS-EN-ISO-16189 - Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine dimethylformamide in footwear materials
- BS-EN-ISO-16189-TC - Tracked Changes. Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine dimethylformamide in footwear materials
- BS-EN-ISO-16190 - Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAHs) in footwear materials
- BS-EN-ISO-16190-TC - Tracked Changes. Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAHs) in footwear materials
- BS-EN-ISO-17693 - Footwear. Test methods for uppers. Resistance to damage on lasting
- BS-EN-ISO-17694 - Footwear. Test methods for uppers and lining. Flex resistance
- BS-EN-ISO-17695 - Footwear. Test methods for uppers. Deformability
- BS-EN-ISO-17696 - Footwear. Test methods for uppers, linings and insocks. Tear strength
- BS-EN-ISO-17697 - Footwear. Test methods for uppers, lining and insocks. Seam strength
- BS-EN-ISO-17698 - Footwear. Test methods for uppers. Delamination resistance
- BS-EN-ISO-17700 - Footwear. Test methods for upper components and insocks. Colour fastness to rubbing and bleeding
- BS-EN-ISO-17701 - Footwear. Test methods for uppers, lining and insocks. Colour migration
- BS-EN-ISO-17702 - Footwear. Test methods for uppers. Water resistance
- BS-EN-ISO-17703 - Footwear. Test methods for uppers. High temperature behaviour
- BS-EN-ISO-17705 - Footwear. Test methods for uppers, lining and insocks. Thermal insulation
- BS-EN-ISO-17706 - Footwear. Test methods for uppers. Tensile strength and elongation
- BS-EN-ISO-17707 - Footwear. Test methods for outsoles. Flex resistance
- BS-EN-ISO-17708 - Footwear. Test methods for whole shoe. Upper sole adhesion
- BS-EN-ISO-17708-TC - Tracked Changes. Footwear. Test methods for whole shoe. Upper sole adhesion
- BS-EN-ISO-17709 - Footwear. Sampling location, preparation and duration of conditioning of samples and test pieces
- BS-EN-ISO-18403 - Footwear. Test methods for slide fasteners. Resistance to damage during closure under a lateral force
- BS-EN-ISO-19410-1 - Footwear sizing. In-shoe measurement
- BS-EN-ISO-19574 - Footwear and footwear components. Qualitative test method to assess antifungal activity (growth test)
- BS-EN-ISO-19952 - Footwear. Vocabulary
- BS-EN-ISO-19953 - Footwear. Test methods for heels. Resistance to lateral impact
- BS-EN-ISO-19956 - Footwear. Test methods for heels. Fatigue resistance
- BS-EN-ISO-19957 - Footwear. Test methods for heels. Heel pin holding strength
- BS-EN-ISO-19957-TC - Tracked Changes. Footwear. Test methods for heels. Heel pin holding strength
- BS-EN-ISO-20150 - Footwear and footwear components. Quantitative challenge test method to assess antifungal activity
- BS-EN-ISO-20535 - Footwear. Test method for insoles and insock. Dimensional change after cycle of wetting and drying
- BS-EN-ISO-20536 - Footwear. Critical substances potentially present in footwear and footwear components. Determination of phenol in footwear materials (ISO 20536:2017)
- BS-EN-ISO-20863-TC - Tracked Changes. Footwear. Test methods for stiffeners and toepuffs. Bondability
- BS-EN-ISO-20864 - Footwear. Test method for stiffeners and toepuffs. Mechanical characteristics
- BS-EN-ISO-20869 - Footwear. Test methods for outsoles, insoles, lining and insocks. Water soluble content
- BS-EN-ISO-20877 - Footwear. Test methods for whole shoe. Thermal insulation
- BS-EN-ISO-21061 - Footwear. Chemical tests. General principles on the preparation of samples
- BS-EN-ISO-22649 - Footwear. Test methods for insoles and insocks. Water absorption and desorption
- BS-EN-ISO-22774 - Footwear. Test methods for accessories. Shoe laces. Abrasion resistance
- BS-EN-ISO-22775 - Footwear. Test methods for accessories. Metallic accessories. Corrosion resistance
- BS-EN-ISO-22776 - Footwear. Test method for accessories. Touch and close fasteners. Shear strength before and after repeated closing
- BS-EN-ISO-22777 - Footwear. Test method for accessories: touch and close fasteners. Peel strenght before and after repeated closingst method for accessories. Touch and close fasteners. Peel strength before and after repeated closing
- BS-EN-ISO-24263 - Footwear. Attachment strength of straps, trims and accessories
- BS-EN-ISO-24264 - Footwear. Test methods for hollow and compact heels and top pieces. Top piece attachment strength
- BS-EN-ISO-24265 - Footwear. Test methods for uppers. Resistance to rubbing using a rubber strip
- BS-EN-ISO-24266 - Footwear. Test methods for whole shoe. Flexing durability
- BS-EN-ISO-24267 - Footwear. Determination of coefficient of friction for footwear and sole components. Test method
- BS-EN-ISO-5403 - Leather. Physical and mechanical tests. Determination of water resistance of flexible leather
- BS-EN-ISO-5403-1 - Leather. Determination of water resistance of flexible leather
- BS-EN-ISO-5403-2 - Leather. Determination of water resistance of flexible leather
- BS-ISO-19408 - Footwear. Sizing. Vocabulary
- BS-ISO-19408-TC - Tracked Changes. Footwear. Sizing. Vocabulary
- BS-ISO-19409 - Footwear. Sizing. Measurement of last dimensions
- BS-ISO-9407 - Footwear sizing. Mondopoint system of sizing and marking
- BS-ISO-9986 - Composition cork for shoe outsoles
- CWA-15043 - Proposal for a XML-Based Format for Storage & Exchange of Design Data in the Footwear
- DD-CEN-ISO-16181 - Footwear. Critical substances potentially present in footwear and footwear components. Determination of phthalates in footwear materials
- DD-ENV-12940 - Footwear Manufacturing Wastes, Waste Classification & Management
- PD-CEN-15990 - Data sheets. Footwear tests materials and test adhesives
- PD-CEN-16417 - Footwear. Footwear industry guideline for substances of very high concern (Annex XIV of REACH)
- PD-CEN-16417-TC - Tracked Changes. Footwear. Footwear industry guideline for substances of very high concern (Annex XIV of REACH)
- PD-CEN-20880 - Correctly Numbered PD-CEN-ISO-20880
- PD-CEN-ISO-16178 - Footwear. Critical substances potentially present in footwear and footwear components. Lists of critical chemical substances
- PD-CEN-ISO-16179 - Footwear. Critical substances potentially present in footwear and footwear components. Determination of organotin compounds in footwear materials
- PD-CEN-ISO-16186 - Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials
- PD-CEN-ISO-16189 - Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine dimethylformamide in footwear materials
- PD-CEN-ISO-16190 - Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAH) in footwear materials
- PD-CEN-ISO-20572 - Footwear. Performance requirements for components for footwear. Accessories
- PD-CEN-ISO-20879 - Footwear. Performance requirements for components for footwear. Uppers
- PD-CEN-ISO-20880 - Footwear. Performance requirements for components for footwear. Outsoles
- PD-CEN-ISO-20881 - Footwear. Performance requirements for components for footwear. Insoles
- PD-CEN-ISO-20882 - Footwear. Performance requirements for components for footwear. Lining and insocks
- PD-CEN-ISO-20883 - Footwear. Performance requirements for components for footwear. Shanks
- PD-CEN-ISO-22648 - Footwear. Performance requirements for components for footwear. Stiffeners and toepuffs
- PD-ISO-19407 - Footwear. Sizing. Conversion of sizing systems
- PD-ISO-19408 - Footwear. Sizing. Vocabulary and terminology
- PD-ISO-20573 - Footwear. Performance requirements for components for footwear. Heels and top pieces
IEC:
ISO:
- ISO-10335 - Rubber and plastics footwear -- Nomenclature
- ISO-10717 - Footwear - Test method for slide fasteners - Burst strength
- ISO-10734 - Footwear - Test method for slide fasteners - Strength of slide fastener pullers
- ISO-10748 - Footwear - Test method for slide fasteners - Slider locking strength
- ISO-10750 - Footwear - Test method for slide fasteners - Attachment strength of end stops
- ISO-10751 - Footwear - Test methods for slide fasteners - Resistance to repeated opening and closing
- ISO-10764 - Footwear - Test methods for slide fasteners - Lateral strength
- ISO-10765 - Footwear - Test method for the characterization of elastic materials - Tensile performance
- ISO-10768 - Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance
- ISO-16177 - Footwear - Resistance to crack initiation and growth - Belt flex method
- ISO-16178 - Footwear - Critical substances potentially present in footwear and footwear components - Lists of critical chemical substances
- ISO-16179 - Footwear - Critical substances potentially present in footwear and footwear components - Determination of organotin compounds in footwear materials
- ISO-16181 - Footwear - Critical substances potentially present in footwear and footwear components - Determination of phthalates in footwear materials
- ISO-16181-1 - Footwear - Critical substances potentially present in footwear and footwear components - Part 1: Determination of phthalate with solvent extraction
- ISO-16181-2 - Footwear - Critical substances potentially present in footwear and footwear components - Part 2: Determination of phthalate without solvent extraction
- ISO-16186 - Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials
- ISO-16187 - Footwear and footwear components - Test method to assess antibacterial activity
- ISO-16189 - Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethylformamide in footwear materials
- ISO-16190 - Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAHs) in footwear materials
- ISO-17693 - Footwear - Test methods for uppers - Resistance to damage on lasting
- ISO-17694 - Footwear - Test methods for uppers and lining - Flex resistance
- ISO-17695 - Footwear - Test methods for uppers - Deformability
- ISO-17696 - Footwear - Test methods for uppers, linings and insocks - Tear strength
- ISO-17697 - Footwear - Test methods for uppers, lining and insocks - Seam strength
- ISO-17698 - Footwear - Test methods for uppers - Delamination resistance
- ISO-17699 - Footwear - Test methods for uppers and lining - Water vapour permeability and absorption
- ISO-17700 - Footwear - Test methods for upper components and insocks - Colour fastness to rubbing and bleeding
- ISO-17701 - Footwear - Test methods for uppers, lining and insocks - Colour migration
- ISO-17702 - Footwear - Test methods for uppers - Water resistance
- ISO-17703 - Footwear - Test methods for uppers - High temperature behaviour
- ISO-17704 - Footwear - Test methods for uppers, linings and insocks - Abrasion resistance
- ISO-17705 - Footwear - Test methods for uppers, lining and insocks - Thermal insulation
- ISO-17706 - Footwear - Test methods for uppers - Tensile strength and elongation
- ISO-17707 - Footwear - Test methods for outsoles - Flex resistance
- ISO-17708 - Footwear - Test methods for whole shoe - Upper sole adhesion
- ISO-17709 - Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
- ISO-18403 - Footwear - Test methods for slide fasteners - Resistance to damage during closure under a lateral force
- ISO-18454 - Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear
- ISO-18895 - Footwear - Test methods for shanks - Fatigue resistance
- ISO-18896 - Footwear - Test methods for shanks - Longitudinal stiffness
- ISO-19407 - Footwear - Sizing - Conversion of sizing systems
- ISO-19408 - Footwear - Sizing - Vocabulary
- ISO-19409 - Footwear - Sizing - Measurement of last dimensions
- ISO-19410-1 - Footwear sizing - In-shoe measurement - Part 1: Shoe length
- ISO-19574 - Footwear and footwear components - Qualitative test method to assess antifungal activity (growth test)
- ISO-19577 - Footwear - Critical substances potentially present in footwear and footwear components - Determination of Nitrosamines
- ISO-19952 - Footwear - Vocabulary
- ISO-19953 - Footwear - Test methods for heels - Resistance to lateral impact
- ISO-19954 - Footwear - Test methods for whole shoe - Washability in a domestic washing machine
- ISO-19956 - Footwear - Test methods for heels - Fatigue resistance
- ISO-19957 - Footwear - Test methods for heels - Heel pin holding strength
- ISO-19958 - Footwear - Test methods for heels and top pieces - Top piece retention strength
- ISO-20150 - Footwear and footwear components - Quantitative challenge test method to assess antifungal activity
- ISO-20535 - Footwear - Test method for insoles and insocks - Dimensional change after cycle of wetting and drying
- ISO-20536 - Footwear - Critical substances potentially present in footwear and footwear components - Determination of phenol in footwear materials
- ISO-20572 - Footwear - Performance requirements for components for footwear - Accessories
- ISO-20573 - Footwear - Performance requirements for components for footwear - Heels and top pieces
- ISO-20863 - Footwear - Test methods for stiffeners and toepuffs - Bondability
- ISO-20864 - Footwear - Test methods for stiffeners and toepuffs - Mechanical characteristics
- ISO-20865 - Footwear - Test methods for outsoles - Compression energy
- ISO-20866 - Footwear - Test methods for insoles - Delamination resistance
- ISO-20867 - Footwear - Test methods for insoles - Heel pin holding strength
- ISO-20868 - Footwear - Test methods for insoles - Abrasion resistance
- ISO-20869 - Footwear - Test method for outsoles, insoles, linings and insocks - Water soluble content
- ISO-20870 - Footwear - Ageing conditioning
- ISO-20871 - Footwear - Test methods for outsoles - Abrasion resistance
- ISO-20872 - Footwear - Test methods for outsoles - Tear strength
- ISO-20873 - Footwear - Test methods for outsoles - Dimensional stability
- ISO-20874 - Footwear - Test methods for outsoles - Needle tear strength
- ISO-20875 - Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance
- ISO-20876 - Footwear - Test methods for insoles - Resistance to stitch tear
- ISO-20877 - Footwear - Test methods for whole shoe - Thermal insulation
- ISO-20879 - Footwear - Performance requirements for components for footwear - Uppers
- ISO-20880 - Footwear - Performance requirements for components for footwear - Outsoles
- ISO-20881 - Footwear - Performance requirements for components for footwear - Insoles
- ISO-20882 - Footwear - Performance requirements for components for footwear - Lining and insocks
- ISO-20883 - Footwear - Performance requirements for components for footwear - Shanks
- ISO-21061 - Footwear - Chemical tests - General principles on the preparation of samples
- ISO-22648 - Footwear - Performance requirements for components for footwear - Stiffeners and toepuffs
- ISO-22649 - Footwear - Test methods for insoles and insocks - Water absorption and desorption
- ISO-22650 - Footwear - Test methods for whole shoe - Heel attachment
- ISO-22651 - Footwear - Test methods for insoles - Dimensional stability
- ISO-22652 - Footwear - Test methods for insoles, lining and insocks - Perspiration resistance
- ISO-22653 - Footwear - Test methods for lining and insocks - Static friction
- ISO-22654 - Footwear - Test methods for outsoles - Tensile strength and elongation
- ISO-22774 - Footwear - Test methods for accessories: shoe laces - Abrasion resistance
- ISO-22775 - Footwear - Test methods for accessories: Metallic accessories - Corrosion resistance
- ISO-22776 - Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing
- ISO-22777 - Footwear - Test methods for accessories: Touch and close fasteners - Peel strength before and after repeated closing
- ISO-24263 - Footwear - Attachment strength of straps, trims and accessories
- ISO-24264 - Footwear - Test methods for hollow and compact heels with top pieces - Top piece attachment strength
- ISO-24265 - Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip
- ISO-24267 - Footwear - Determination of coefficient of friction for footwear and sole components - Test method
- ISO-5403-1 - Leather - Determination of water resistance of flexible leather - Part 1: Repeated linear compression (penetrometer)
- ISO-5403-2 - Leather - Determination of water resistance of flexible leather - Part 2: Repeated angular compression (Maeser)
- ISO-9407 - Footwear sizing - Mondopoint system of sizing and marking
- ISO-9986 - Composition cork for shoe outsoles
Other SDOs:
- DIN-EN-12044 - Footwear, Leather & Imitation Leather Goods Manufacturing Machines - Cutting & Punchin
- DIN-EN-12387 - Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements; German version EN 12387:2005+A1:2009
- DIN-EN-12653/A1 - Footwear, Leather & Imitation Leather Manufacturing Machines, Nailing Machines - Safet
- DIN-EN-12746 - Footwear - Test methods for insoles and insocks - Water absorption and desorption; German version EN 12746:2000 + A1:2005
- DIN-EN-12940 - Footwear Manufacturing Wastes, Waste Classification & Management
- DIN-EN-13457 - Footwear, Leather & Imitation Leather Goods Manufacturing Machines - Splitting, Skivin
- DIN-EN-13511 - Footwear, Test Methods for Uppers - Resistance To Damage on Lasting
- DIN-EN-13512 - Footwear, Test Methods for Uppers & Lining - Flex Resistance, English Version of Din E
- DIN-EN-13513 - Footwear, Test Methods for Uppers - Deformability
- DIN-EN-13514 - Footwear - Test methods for uppers - Delamination resistance; German version EN 13514:2001
- DIN-EN-13516 - Footwear, Test Methods for Uppers, Lining & Insocks - Colour Fastness To Rubbing
- DIN-EN-13517 - Footwear - Test methods for uppers, lining and insocks - Colour migration; German version EN 13517:2001
- DIN-EN-13518 - Footwear, Test Methods for Uppers - Water Resistance
- DIN-EN-13520 - Footwear, Test Methods for Uppers, Lining & Insocks - Abrasion Resistance
- DIN-EN-13571 - Footwear, Test Methods for Uppers, Lining & Insocks - Tear Strength
- DIN-EN-14602 - Footwear - Test methods for the assessment of ecological criteria; German version EN 14602:2012
- DIN-EN-930/A1 - Footwear, Leather & Imitation Leather Goods Manufacturing Machines, Roughing, Scouring
- DIN-EN-931/A1 - Footwear Manufacturing Machines, Lasting Machines - Safety Requirements
- DIN-EN-ISO-17693 - Footwear - Test Methods for Uppers - Resistance To Damage on Lasting
- DIN-EN-ISO-17695 - Footwear - Test Methods for Uppers - Deformability
- DIN-EN-ISO-17700 - Footwear - Test Methods for Uppers, Linings & Insockets - Colour Fastness To Rubbing
- DIN-EN-ISO-17707 - Footwear, Test Methods for Outsoles, Flex Resistance
- DIN-EN-ISO-19953 - Footwear, Test Methods for Heels, Resistance To Lateral Impact
- DIN-EN-ISO-19954 - Footwear, Test Methods for Whole Shoe, Washability in a Domestic Washing Machine
- DIN-EN-ISO-19956 - Footwear - Test Methods for Heels, Fatigue Resistance
- DIN-EN-ISO-19957 - Footwear - Test Methods for Heels, Heel Pin Holding Strength
- DIN-EN-ISO-19958 - Footwear - Test Methods for Heels & Top Pieces, Top Piece Retention Strength
- DIN-EN-ISO-20863 - Footwear, Test Methods for Stiffeners & Toepuffs, Bondability
- DIN-EN-ISO-20864 - Footwear, Test Methods for Stiffeners & Toepuffs, Mechanical Characteristics
- DIN-EN-ISO-22774 - Footwear, Test Methods for Accessories: Shoe Laces, Abrasion Resistance
- DIN-EN-ISO-22775 - Footwear - Test Methods for Accessories, Metallic Accessories - Corrosion Resistance
- DIN-EN-ISO-22776 - Footwear - Test Methods for Accessories, Touch & Close Fasteners - Shear Strength Befo
- DIN-EN-ISO-22777 - Footwear - Test Methods for Accessories, Touch & Close Fasteners - Peel Strength Befor
- EN-12044 - Footwear, Leather & Imitation Leather Goods Manufacturing Machines - Cutting & Punchin
- EN-12222 - Footwear, Standard Atmospheres for Conditioning & Testing of Footwear & Components For
- EN-12387 - Footwear, Leather & Imitation Leather Goods Manufacturing Machines - Modular Shoe Repa
- EN-12653 - Footwear, Leather & Imitation Leather Manufacturing Machines - Nailing Machines - Safe
- EN-12653/A1 - Footwear, Leather and Imitation Leather Manufacturing Machines, Nailing Machines - Safet
- EN-12746 - Footwear, Test Methods for Insoles & Insocks - Water Absorption & Desorption
- EN-12940 - Footwear manufacturing wastes. Waste classification and management
- EN-13457 - Footwear, Leather & Imitation Leather Goods Manufacturing Machines - Splitting, Skivin
- EN-13511 - Footwear, Test Methods for Uppers - Resistance To Damage on Lasting
- EN-13513 - Footwear, Test Methods for Uppers - Deformability
- EN-13516 - Footwear, Test Methods for Uppers, Lining & Insocks - Colour Fastness To Rubbing
- EN-13518 - Footwear, Test Methods for Uppers - Water Resistance
- EN-13520 - Footwear, Test Methods for Uppers, Lining & Insocks - Abrasion Resistance
- EN-1392 - Adhesives for Leather & Footwear Materials - Solvent-Based & Dispersion Adhesives - Te
- EN-14294 - Adhesives for Leather & Footwear Materials - Preparation of Bonded Test Pieces by Mou
- EN-14602 - Footwear - Test methods for the assessment of ecological criteria
- EN-15307 - Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
- EN-930/A1 - Footwear, Leather and Imitation Leather Goods Manufacturing Machines, Roughing, Scouring
- EN-931/A1 - Footwear Manufacturing Machines, Lasting Machines - Safety Requirements
- EN-IEC-61340-4-3 - Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear
- EN-ISO-10717 - Footwear - Test Methods for Slide Fasteners - Burst Strength
- EN-ISO-10734 - Footwear - Test method for slide fasteners - Strength of slide fastener pullers
- EN-ISO-10748 - Footwear - Test method for slide fasteners - Slider locking strength
- EN-ISO-10750 - Footwear - Test method for slide fasteners - Attachment strength of end stops
- EN-ISO-10751 - Footwear - Test methods for slide fasteners - Resistance to repeated opening and closing
- EN-ISO-10764 - Footwear - Test methods for slide fasteners - Lateral strength
- EN-ISO-10765 - Footwear - Test Method for the Characterization of Elastic Materials - Tensile Perform
- EN-ISO-10768 - Footwear - Test Method for the Determination of the Resistance of Elastic Materials Fo
- EN-ISO-16177 - Footwear - Resistance to crack initiation and growth - Belt flex method (ISO 16177:2012)
- EN-ISO-16187 - Footwear and footwear components - Test method to assess antibacterial activity (ISO 16187:2013)
- EN-ISO-17693 - Footwear - Test Methods for Uppers - Resistance To Damage on Lasting
- EN-ISO-17694 - Footwear - Test methods for uppers and lining - Flex resistance
- EN-ISO-17695 - Footwear - Test Methods for Uppers - Deformability
- EN-ISO-17697 - Footwear - Test methods for uppers, lining and insocks - Seam strength
- EN-ISO-17698 - Footwear - Test methods for uppers - Delamination resistance
- EN-ISO-17700 - Footwear - Test Methods for Uppers, Linings & Insocks - Colour Fastness To Rubbing
- EN-ISO-17701 - Footwear - Test methods for uppers, lining and insocks - Colour migration
- EN-ISO-17707 - Footwear, Test Methods for Outsoles, Flex Resistance
- EN-ISO-18403 - Footwear - Test methods for slide fasteners - Resistance to damage during closure under a lateral force
- EN-ISO-19952 - Footwear, Vocabulary
- EN-ISO-19953 - Footwear, Test Methods for Heels, Resistance To Lateral Impact
- EN-ISO-19956 - Footwear - Test Methods for Heels, Fatigue Resistance
- EN-ISO-19957 - Footwear - Test Methods for Heels, Heel Pin Holding Strength
- EN-ISO-19958 - Footwear - Test Methods for Heels & Top Pieces, Top Piece Retention Strength
- EN-ISO-20150 - Footwear and footwear components - Quantitative challenge test method to assess antifungal activity (ISO 20150:2019)
- EN-ISO-20536 - Footwear - Critical substances potentially present in footwear and footwear components - Determination of phenol in footwear materials
- EN-ISO-20863 - Footwear, Test Methods for Stiffeners & Toepuffs, Bondability
- EN-ISO-20864 - Footwear, Test Methods for Stiffeners & Toepuffs, Mechanical Characteristics
- EN-ISO-20869 - Footwear, Test Methods for Outsoles, Insoles, Lining & Insocks, Water Soluble Content
- EN-ISO-20877 - Footwear - Test methods for whole shoe - Thermal insulation
- EN-ISO-22649 - Footwear - Test methods for insoles and insocks - Water absorption and desorption
- EN-ISO-22775 - Footwear - Test Methods for Accessories, Metallic Acccessories - Corrosion Resistance
- EN-ISO-22776 - Footwear - Test Methods for Accessories, Touch & Close Fasteners - Shear Strength Befo
- EN-ISO-22777 - Footwear - Test Methods for Accessories, Touch & Close Fasteners - Peel Strength Befor
- EN-ISO-5403-1 - Leather - Determination of water resistance of flexible leather - Part 1: Repeated linear compression (penetrometer) (ISO 5403-1:2011)
- EN-ISO-5403-2 - Leather - Determination of water resistance of flexible leather - Part 2: Repeated angular compression (Maeser) (ISO 5403-2:2011)
- SIS-CEN-ISO/TR-16178 - Footwear - Critical substances potentially present in footwear and footwear components - Lists of critical chemical substances (ISO/TR 16178:2021)
- SIS-CEN-ISO/TR-20572 - Footwear - Performance requirements for components for footwear - Accessories (ISO/TR 20572:2007)
- SIS-CEN-ISO/TR-20879 - Footwear - Performance requirements for components for footwear - Uppers (ISO/TR 20879:2007)
- SIS-CEN-ISO/TR-20880 - Footwear - Performance requirements for components for footwear - Outsoles (ISO/TR 20880:2007)
- SIS-CEN-ISO/TR-20881 - Footwear - Performance requirements for components for footwear - Insoles (ISO/TR 20881:2007)
- SIS-CEN-ISO/TR-20882 - Footwear - Performance requirements for components for footwear - Lining and insocks (ISO/TR 20882:2007)
- SIS-CEN-ISO/TR-20883 - Footwear - Performance requirements for components for footwear - Shanks (ISO/TR 20883:2007)
- SIS-CEN-ISO/TR-22648 - Footwear - Performance requirements for components for footwear - Stiffeners and toepuffs (ISO/TR 22648:2007)
- SIS-CEN-ISO/TS-16179 - Footwear - Critical substances potentially present in footwear and footwear components - Determination of organotin compounds in footwear materials (ISO/TS 16179:2012)
- SIS-CEN-ISO/TS-16181 - Footwear - Critical substances potentially present in footwear and footwear components - Determination of phthalates in footwear materials (ISO/TS 16181:2011)
- SIS-CEN-ISO/TS-16186 - Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials (ISO/TS 16186:2012)
- SIS-CEN/TR-16417 - Footwear - Footwear industry guideline for substances of very high concern (Annex XIV of REACH)
- SIS-ISO/TR-20573 - Footwear - Performance requirements for components for footwear - Heels ant top pieces
- SS-EN-12044 - Footwear, leather and imitation leather goods manufucturing machines - Cutting and punching machines - Safety requirements
- SS-EN-12203 - Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
- SS-EN-12222 - Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear
- SS-EN-12387 - Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
- SS-EN-1241 - Adhesives - Determination of acid values
- SS-EN-1242 - Adhesives - Determination of isocyanate content
- SS-EN-1244 - Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light
- SS-EN-1246 - Adhesives - Determination of ash and sulphated ash
- SS-EN-12545 - Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements
- SS-EN-12653 - Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements
- SS-EN-12653-AM1 - Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements
- SS-EN-12743 - Footwear - Test methods for outsoles - Compression energy
- SS-EN-12744 - Footwear - Test methods for insoles - Delamination resistance
- SS-EN-12745 - Footwear - Test methods for insoles - Heel pin holding strength
- SS-EN-12746 - Footwear - Test methods for insoles and insocks - Water absorption and desorption
- SS-EN-12746-AM1 - Footwear - Test methods for insoles and insocks - Water absorption and desorption
- SS-EN-12747 - Footwear - Test methods for insoles - Abrasion resistance
- SS-EN-12748 - Footwear - Test methods for outsoles, insoles, lining and insocks - Water soluble content
- SS-EN-12749 - Footwear - Ageing conditioning
- SS-EN-12770 - Footwear - Test methods for outsoles - Abrasion resistance
- SS-EN-12771 - Footwear - Test methods for outsoles - Tear strength
- SS-EN-12772 - Footwear - Test methods for outsoles - Dimensional stability
- SS-EN-12773 - Footwear - Test methods for outsoles - Needle tear strength
- SS-EN-12774 - Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance
- SS-EN-12782 - Footwear - Test methods for insoles - Resistance to stitch tear
- SS-EN-12784 - Footwear - Test methods for whole shoe - Thermal insulation
- SS-EN-12785 - Footwear - Test methods for whole shoe - Heel attachment
- SS-EN-12800 - Footwear - Test methods for insoles - Dimensional stability
- SS-EN-12801 - Footwear - Test methods for insoles, lining and insocks - Perspiration resistance
- SS-EN-12801-AM1 - Footwear - Test methods for insoles, lining and insocks - Perspiration resistance
- SS-EN-12803 - Footwear - Test methods for outsoles - Tensile strength and elongation
- SS-EN-12826 - Footwear - Test methods for lining and insocks - Static friction
- SS-EN-12940 - Footwear manufacturing wastes - Waste classification and management
- SS-EN-12958 - Footwear - Test methods for shanks - Fatigue resistance
- SS-EN-12958-AM1 - Footwear - Test methods for shanks - Fatigue resistance
- SS-EN-12959 - Footwear - Test methods for shanks - Longitudinal stiffness
- SS-EN-13073 - Footwear - Test methods for whole shoe - Water resistance
- SS-EN-13400 - Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
- SS-EN-13445 - Unfired pressure vessels
- SS-EN-13457 - Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements
- SS-EN-13511 - Footwear - Test methods of uppers - Resistance to damage on lasting
- SS-EN-13512 - Footwear - Test methods for uppers and lining - Flex resistance
- SS-EN-13513 - Footwear - Test methods for uppers - Deformability
- SS-EN-13514 - Footwear - Test methods for uppers - Delamination resistance
- SS-EN-13515 - Footwear - Test methods for uppers and lining - Water vapour permeability and absorption
- SS-EN-13516 - Footwear - Test methods for uppers, lining and insocks - Colour fastness to rubbing
- SS-EN-13517 - Footwear - Test methods for uppers, lining and insocks - Colour migration
- SS-EN-13518 - Footwear - Test methods for uppers - Water resistance
- SS-EN-13518-AM1 - Footwear - Test methods for uppers - Water resistance
- SS-EN-13519 - Footwear - Test methods for uppers - High temperature behaviour
- SS-EN-13520 - Footwear - Test methods for uppers, lining and insocks - Abrasion resistance
- SS-EN-13520-AM1 - Footwear - Test methods for uppers, lining and insocks - Abrasion resistance
- SS-EN-13521 - Footwear - Test methods for uppers, lining and insocks - Thermal insulation
- SS-EN-13522 - Footweat - Test methods for uppers - Tensile strength and elongation
- SS-EN-13571 - Footwear - Test methods for uppers, lining and insocks - Tear strength
- SS-EN-13572 - Footwear - Test methods for uppers, lining and insocks - Seam strength
- SS-EN-1391 - Adhesives for leather and footwear materials - A method for evaluating the bondability of materials - Minimum requirements and material classification
- SS-EN-1392 - Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions
- SS-EN-14602 - Footwear - Test methods for the assessment of ecological criteria
- SS-EN-1845 - Footwear manufacturing machines - Footwear moulding machines - Safety requirements
- SS-EN-522 - Adhesives for leather and footwear materials - Bond strength - Minimum requirements and adhesive classification
- SS-EN-930 - Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements
- SS-EN-930-AM1 - Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements
- SS-EN-931 - Footwear manufacturing machines - Lasting machines - Safety requirements
- SS-EN-931-AM1 - Footwear manufacturing machines - Lasting machines - Safety requirements
- SS-EN-ISO-10717 - Footwear - Test method for slide fasteners - Burst strength (ISO 10717:2010)
- SS-EN-ISO-10734 - Footwear - Test method for slide fasteners - Strength of slide fastener pullers (ISO 10734:2016)
- SS-EN-ISO-10748 - Footwear - Test method for slide fasteners - Slider locking strength (ISO 10748:2011)
- SS-EN-ISO-10750 - Footwear - Test method for slide fasteners - Attachment strength of end stops (ISO 10750:2015)
- SS-EN-ISO-10751 - Footwear - Test methods for slide fasteners - Resistance to repeated opening and closing (ISO 10751:2016)
- SS-EN-ISO-10764 - Footwear - Test methods for slide fasteners - Lateral strength (ISO 10764:2016)
- SS-EN-ISO-10765 - Footwear - Test method for the characterization of elastic materials - Tensile performance (ISO 10765:2010)
- SS-EN-ISO-10768 - Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010)
- SS-EN-ISO-10821 - Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005)
- SS-EN-ISO-16177 - Footwear - Resistance to crack initiation and growth - Belt flex method (ISO 16177:2012)
- SS-EN-ISO-16181-1 - Footwear - Critical substances potentially present in footwear and footwear components - Part 1: Determination of phthalate with solvent extraction (ISO 16181-1:2021)
- SS-EN-ISO-16181-2 - Footwear - Critical substances potentially present in footwear and footwear components - Part 2: Determination of phthalate without solvent extraction (ISO 16181-2:2021)
- SS-EN-ISO-16186 - Footwear - Critical substances potentially present in footwear and footwear components - Determination of dimethyl fumarat (DMFU) (ISO 16186:2021)
- SS-EN-ISO-16187 - Footwear and footwear components - Test method to assess antibacterial activity (ISO 16187:2013)
- SS-EN-ISO-16189 - Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethylformamide in footwear materials (ISO 16189:2021)
- SS-EN-ISO-16190 - Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAHs) in footwear materials (ISO 16190:2021)
- SS-EN-ISO-17693 - Footwear - Test methods for uppers - Resistance to damage on lasting (ISO 17693:2004)
- SS-EN-ISO-17694 - Footwear - Test methods for uppers and lining - Flex resistance (ISO 17694:2016)
- SS-EN-ISO-17695 - Footwear - Test methods for uppers - Deformability (ISO 17695:2004)
- SS-EN-ISO-17696 - Footwear - Test methods for uppers, linings and insocks - Tear strength (ISO 17696:2004)
- SS-EN-ISO-17697 - Footwear - Test methods for uppers, lining and insocks - Seam strength (ISO 17697:2016)
- SS-EN-ISO-17698 - Footwear - Test methods for uppers - Delamination resistance (ISO 17698:2016)
- SS-EN-ISO-17700 - Footwear - Test methods for uppers, linings and insocks - Colour fastness to rubbing (ISO 17700:2004)
- SS-EN-ISO-17701 - Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO 17701:2016)
- SS-EN-ISO-17702 - Footwear - Test methods for uppers - Water resistance (ISO 17702:2003)
- SS-EN-ISO-17703 - Footwear - Test methods for uppers - High temperature behaviour (ISO 17703:2003)
- SS-EN-ISO-17705 - Footwear - Test methods for uppers, lining and insocks - Thermal insulation (ISO 17705:2003)
- SS-EN-ISO-17706 - Footwear - Test methods for uppers - Tensile strength and elongation (ISO 17706:2003)
- SS-EN-ISO-17707 - Footwear - Test methods for outsoles - Flex resistance (ISO 17707:2005)
- SS-EN-ISO-17708 - Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2018)
- SS-EN-ISO-17709 - Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces (ISO 17709:2004)
- SS-EN-ISO-18403 - Footwear - Test methods for slide fasteners - Resistance to damage during closure under a lateral force (ISO 18403:2016)
- SS-EN-ISO-18895 - Footwear - Test methods for shanks - Fatigue resistance (ISO 18895:2006)
- SS-EN-ISO-19410-1 - Footwear sizing - Inshoe measurement - Part 1: Shoe length (ISO 19410-1:2022)
- SS-EN-ISO-19574 - Footwear and footwear components - Qualitative test method to assess antifungal activity (growth test) (ISO 19574:2022)
- SS-EN-ISO-19577 - Footwear - Critical substances potentially present in footwear and footwear components - Determination of Nitrosamines (ISO 19577:2019)
- SS-EN-ISO-19952 - Footwear - Vocabulary (ISO 19952:2005)
- SS-EN-ISO-19953 - Footwear - Test methods for heels - Resistance to lateral impact (ISO 19953:2004)
- SS-EN-ISO-19954 - Footwear - Test methods for whole shoe - Washability in a domestic washing machine (ISO 19954:2003)
- SS-EN-ISO-19956 - Footwear - Test methods for heels - Fatigue resistance (ISO 19956:2004)
- SS-EN-ISO-19957 - Footwear - Test methods for heels - Heel pin holding strength (ISO 19957:2021)
- SS-EN-ISO-19958 - Footwear - Test methods for heels and top pieces - Top piece retention strength (ISO 19958:2004)
- SS-EN-ISO-20150 - Footwear and footwear components - Quantitative challenge test method to assess antifungal activity (ISO 20150:2019)
- SS-EN-ISO-20535 - Footwear - Test method for insoles and insocks - Dimensional change after cycle of wetting and drying (ISO 20535:2019)
- SS-EN-ISO-20536 - Footwear - Critical substances potentially present in footwear and footwear components - Determination of phenol in footwear materials (ISO 20536:2017)
- SS-EN-ISO-20863 - Footwear - Test methods for stiffeners and toepuffs - Bondability (ISO 20863:2018)
- SS-EN-ISO-20864 - Footwear - Test methods for stiffeners and toepuffs - Mechanical characteristics (ISO 20864:2004)
- SS-EN-ISO-20869 - Footwear - Test methods for outsoles, insoles, lining and insocks - Water soluble content (ISO 20869:2010)
- SS-EN-ISO-20877 - Footwear - Test methods for whole shoe - Thermal insulation (ISO 20877:2011)
- SS-EN-ISO-21061 - Footwear - Chemical tests - General principles on the preparation of samples (ISO 21061:2021)
- SS-EN-ISO-22649 - Footwear - Test methods for insoles and insocks - Water absorption and desorption (ISO 22649:2016)
- SS-EN-ISO-22653 - Footwear - Test methods for lining and insocks - Static friction (ISO 22653:2003)
- SS-EN-ISO-22774 - Footwear - Test methods for accessories: shoe laces - Abrasion resistance (ISO 22774:2004)
- SS-EN-ISO-22775 - Footwear - Test methods for accessories: Metallic accessories - Corrosion resistance (ISO 22775:2004)
- SS-EN-ISO-22776 - Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing (ISO 22776:2004)
- SS-EN-ISO-22777 - Footwear - Test methods for accessories: touch and close fasteners - Peel strength before and after repeated closing (ISO 22777:2004)
- SS-EN-ISO-24263 - Footwear - Attachment strength of straps, trims and accessories (ISO 24263:2020)
- SS-EN-ISO-24264 - Footwear - Test methods for hollow and compact heels and top pieces - Top piece attachment strength (ISO 24264:2020)
- SS-EN-ISO-24265 - Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020)
- SS-EN-ISO-24266 - Footwear - Test methods for whole shoe - Flexing durability (ISO 24266:2020)
- SS-EN-ISO-24267 - Footwear - Determination of coefficient of friction for footwear and sole components - Test method (ISO 24267:2020)
- SS-EN-ISO-5353 - Earth-moving machinery and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995)
- SS-EN-ISO-5403-1 - Leather - Determination of water resistance of flexible leather - Part 1: Repeated linear compression (penetrometer) (ISO 5403-1:2011)
- SS-EN-ISO-5403-2 - Leather - Determination of water resistance of flexible leather - Part 2: Repeated angular compression (Maeser) (ISO 5403-2:2011)
- SS-ISO-3795 - Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
- SS-ISO-9407 - Shoes sizes - Mondopoint system of sizing and marking (ISO 9407:1991)