Document Center List of Standards on Gases For Industrial Application Including Compressed Air And Hydrogen Hydrogen Technologies, See 27.075 Liquefied Petroleum Gases, See 75.160.30
ICS Code 71.100.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-B827 - Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
- ASTM-C1143 - Standard Specification for Helium for Use as a Cover Gas for Liquid Sodium (Withdrawn 2000)
- ASTM-D2512 - Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) (Withdrawn 2023)
- ASTM-D2623 - Methods for Knock Characteristics of Liquefied Petroleum (LP) Gases by the Motor (LP) Method (Withdrawn 1989)
- ASTM-D2713 - Standard Test Method for Dryness of Propane (Valve Freeze Method)
- ASTM-D2779 - Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids
- ASTM-D3057 - Standard Test Method for Moisture in Aerosol Products (Withdrawn 2000)
- ASTM-D4051 - Standard Practice for Preparation of Low-Pressure Gas Blends
- ASTM-D4455 - Standard Test Method for Enumeration of Aquatic Bacteria by Epifluorescence Microscopy Counting Procedure (Withdrawn 2019)
- ASTM-D7653 - Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
- ASTM-E1747 - Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications
- ASTM-E1754 - Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
- ASTM-E1786 - Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
- ASTM-E582 - Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
- ASTM-E869 - Standard Test Method for Performance Evaluation of Fuel Ethanol Manufacturing Facilities (Withdrawn 2009)
- ASTM-F1307 - Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
- ASTM-F2476 - Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO2TR) Through Barrier Materials Using An Infrared Detector
- ASTM-G114 - Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
BSI:
- BS-4105 - Specification for liquid carbon dioxide, industrial
- BS-4366 - Specification for industrial nitrogen
- BS-4431 - Methods of sampling and test for liquefied anhydrous ammonia
- BS-4559-4 - Methods for preparation of calibration gas mixtures. Certificate of mixture preparation
- BS-5355 - Specification for Filling Ratios & Developed Pressures for Liquefiable & Permanent Gas
- BS-669-1-TC - Tracked Changes. Flexible hoses, end fittings and sockets for gas burning appliances
- BS-8618 - Granular carbon dioxide (CO2) absorbent material for life support, diving, hyper- and hypobaric applications. Specification
- BS-EN-17124 - Hydrogen fuel. Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen. Proton exchange membrane (PEM) fuel cell applications for vehicles
- BS-EN-17124-TC - Tracked Changes. Hydrogen fuel. Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen. Proton exchange membrane (PEM) fuel cell applications for vehicles
- BS-EN-17127 - Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols
- BS-EN-17127-TC - Tracked Changes. Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols
- BS-EN-IEC-63278-1 - Asset Administration Shell for industrial applications
- BS-EN-ISO-10156 - Gas cylinders. Gases and gas mixtures. Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
- BS-EN-ISO-10156-2 - Gas cylinders. Gases and gas mixtures
- BS-EN-ISO-13338 - Gas cylinders. Gases and gas mixtures. Determination of corrosiveness for the selection of cylinder valve outlet
- BS-EN-ISO-13338-TC - Tracked Changes. Gas cylinders. Gases and gas mixtures. Determination of corrosiveness for the selection of cylinder valve outlet
- BS-EN-ISO-14175 - Welding consumables. Gases and gas mixtures for fusion welding and allied processes
- BS-EN-ISO-17268 - Gaseous hydrogen land vehicle refuelling connection devices
- BS-ISO-10298 - Gas cylinders. Gases and gas mixtures. Determination of toxicity for the selection of cylinder valve outlets
- BS-ISO-10298-TC - Tracked Changes. Gas cylinders. Gases and gas mixtures. Determination of toxicity for the selection of cylinder valve outlets
- BS-ISO-12500-1 - Filters for compressed air. Test methods
- BS-ISO-12500-2 - Filters for compressed air. Test methods
- BS-ISO-13338 - Gas cylinders. Gases and gas mixtures. Determination of tissue corrosiveness for the selection of cylinder valve outlets
- BS-ISO-14687 - Hydrogen fuel quality. Product specification
- BS-ISO-14687-2 - Hydrogen fuel. Product specification
- BS-ISO-14687-3 - Hydrogen fuel. Product specification
- BS-ISO-16110-1 - Hydrogen generators using fuel processing technologies
- BS-ISO-16110-2 - Hydrogen generators using fuel processing technologies
- BS-ISO-16111 - Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
- BS-ISO-16111-TC - Tracked Changes. Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
- BS-ISO-17268 - Gaseous hydrogen land vehicle refuelling connection devices
- BS-ISO-19880-3 - Gaseous hydrogen. Fuelling stations
- BS-ISO-19880-5 - Gaseous hydrogen. Fuelling stations
- BS-ISO-19880-8 - Gaseous hydrogen. Fuelling stations
- BS-ISO-19881 - Gaseous hydrogen. Land vehicle fuel containers
- BS-ISO-21087 - Gas analysis. Analytical methods for hydrogen fuel. Proton exchange membrane (PEM) fuel cell applications for road vehicles
- BS-ISO-22734 - Hydrogen generators using water electrolysis. Industrial, commercial, and residential applications
- BS-ISO-22734-1 - Hydrogen generators using water electrolysis process
- BS-ISO-22734-2 - Hydrogen generators using water electrolysis process
- BS-ISO-26142 - Hydrogen detection apparatus. Stationary applications
- BS-ISO-8573-1 - Compressed air
- BS-ISO-8573-2 - Compressed air. Contaminant measurement
- BS-ISO-8573-2-TC - Tracked Changes. Compressed air. Contaminant measurement
- BS-ISO-8573-4 - Compressed air
- BS-ISO-8573-5 - Compressed air
- DD-ISO-14687-2 - Hydrogen fuel. Product specification
- DD-ISO-20100 - Gaseous hydrogen. Fuelling stations
- PAS-4443 - Assessment criteria: Ancillary valves, devices and components used in hydrogen gas installations. Specification
- PAS-4444 - Hydrogen-fired gas appliances. Guide
- PD-ISO-15916 - Basic considerations for the safety of hydrogen systems
- PD-ISO-19880-1 - Gaseous hydrogen. Fuelling stations
- PD-ISO-19883 - Safety of pressure swing adsorption systems for hydrogen separation and purification
IEC:
ISO:
- ISO-10156 - Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
- ISO-10156-2 - Part 2: Determination of Oxidizing Ability of Toxic and Corrosive Gases and Gas Mixtures,
- ISO-10298 - Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets
- ISO-10298-AM1 - - Amendment 1: Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets - Amendment 1
- ISO-12500-1 - Filters for compressed air - Test methods - Part 1: Oil aerosols
- ISO-12500-2 - Filters for compressed air - Test methods - Part 2: Oil vapours
- ISO-13338 - Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet
- ISO-13984 - Liquid hydrogen -- Land vehicle fuelling system interface
- ISO-13985 - Liquid hydrogen - Land vehicle fuel tanks
- ISO-14175 - Welding consumables - Gases and gas mixtures for fusion welding and allied processes
- ISO-14687 - Hydrogen fuel quality - Product specification
- ISO-14687-1 - Hydrogen fuel - Product specification - Part 1: All applications except proton exchange membrane (PEM) fuel cell for road vehicles
- ISO-14687-2 - Hydrogen fuel - Product specification - Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles
- ISO-14687-3 - Hydrogen fuel - Product specification - Part 3: Proton exchange membrane (PEM) fuel cell applications for stationary appliances
- ISO-14951-2 - Space systems -- Fluid characteristics -- Part 2: Hydrogen propellant
- ISO-15916 - Basic considerations for the safety of hydrogen systems
- ISO-16110-1 - Hydrogen generators using fuel processing technologies - Part 1: Safety
- ISO-16110-2 - Hydrogen generators using fuel processing technologies - Part 2: Test methods for performance
- ISO-16111 - Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
- ISO-17268 - Gaseous hydrogen land vehicle refuelling connection devices
- ISO-19880-1 - Gaseous hydrogen - Fuelling stations - Part 1: General requirements
- ISO-19880-3 - Gaseous hydrogen - Fuelling stations - Part 3: Valves
- ISO-19880-5 - Gaseous hydrogen - Fuelling stations - Part 5: Dispenser hoses and hose assemblies
- ISO-19880-8 - Gaseous hydrogen - Fuelling stations - Part 8: Fuel quality control
- ISO-19880-8-AM1 - - Amendment 1: Alignment with Grade D of ISO 14687
- ISO-19881 - Gaseous hydrogen - Land vehicle fuel containers
- ISO-19883 - Safety of pressure swing adsorption systems for hydrogen separation and purification
- ISO-20100 - Gaseous hydrogen - Fuelling stations
- ISO-21087 - Gas analysis - Analytical methods for hydrogen fuel - Proton exchange membrane (PEM) fuel cell applications for road vehicles
- ISO-22734 - Hydrogen generators using water electrolysis - Industrial, commercial, and residential applications
- ISO-22734-1 - Hydrogen generators using water electrolysis process - Part 1: Industrial and commercial applications
- ISO-22734-2 - Hydrogen generators using water electrolysis process - Part 2: Residential applications
- ISO-26142 - Hydrogen detection apparatus - Stationary applications
- ISO-8573-1 - Compressed air - Part 1: Contaminants and purity classes
- ISO-8573-2 - Compressed air - Contaminant measurement - Part 2: Oil aerosol content
- ISO-8573-3 - Compressed air -- Part 3: Test methods for measurement of humidity
- ISO-8573-4 - Compressed air - Contaminant measurement - Part 4: Particle content
- ISO-8573-5 - Compressed air - Part 5: Test methods for oil vapour and organic solvent content
- ISO-8573-6 - Compressed air - Part 6: Test methods for gaseous contaminant content
- ISO-8573-7 - Compressed air - Part 7: Test method for viable microbiological contaminant content
- ISO-8573-8 - Compressed air - Part 8: Test methods for solid particle content by mass concentration
- ISO-8573-9 - Compressed air - Part 9: Test methods for liquid water content
Other SDOs:
- DIN-EN-720-2 - Gases & Gas Mixtures, Determination of Flammability & Oxidizing Ability
- DIN-EN-ISO-10156-2 - Part 2: Determination of Oxidizing Ability of Toxic & Corrosive Gases & Gas Mixtures,
- DIN-ISO-6141 - Gas analysis - Requirements for certificates for calibration gases and gas mixtures
- EN-17124 - Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for road vehicles
- EN-17127 - Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols
- EN-720-2 - Part 2: Determination of Flammability & Oxidizing Ability of Gases & Gas Mixtures, TRA
- EN-ISO-10156 - Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
- EN-ISO-10156-2 - Gas Cylinders, Gases & Gas Mixtures, Determination of Oxidizing Ability of Toxic & Cor
- EN-ISO-14175 - Welding Consumables, Gases & Gas Mixtures for Fusion Welding & Allied Processes
- EN-ISO-17268 - Gaseous hydrogen land vehicle refuelling connection devices
- JIS-B-8392-1 - Compressed air -- Part 1: Contaminants and purity classes
- JIS-B-8392-4 - Compressed air -- Part 4: Test methods for solid particle content
- JIS-Z-3253 - Shielding gases for fusion welding and thermal cutting
- SIS-ISO/TR-15916 - Basic considerations for the safety of hydrogen systems (ISO/TR 15916:2015, IDT)
- SIS-ISO/TR-17329 - Gas cylinders - Identification of gas cylinder manufacturer marks and their assigned radio frequency identification (RFID) codes
- SIS-ISO/TR-19811 - Gas cylinders - Service life testing for cylinders and tubes of composite construction (ISO/TR 19811, IDT)
- SIS-ISO/TS-19880-1 - Gaseous hydrogen - Fuelling stations - Part 1: General requirements (ISO/TS 19880-1:2016, IDT)
- SIS-ISO/TS-19883 - Safety of pressure swing adsorption systems for hydrogen separation and purification (ISO/TS 19883:2017, IDT)
- SS-EN-13084-4 - Free-standing chimneys - Part 4: Brick liners - Design and execution
- SS-EN-17124 - Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles
- SS-EN-17127 - Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols
- SS-EN-17533 - Gaseous hydrogen - Cylinders and tubes for stationary storage
- SS-EN-720-1 - Transportable gas cylinders - Gases and gas mixtures - Part 1: Properties of pure gases
- SS-EN-720-2 - Transportable gas cylinders - Gases and gas mixtures - Part 2: Determination of flammability and oxidizing ability of gases and gas mixtures
- SS-EN-ISO-10156 - Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2017)
- SS-EN-ISO-10156-2 - Gas cylinders - Gases and gas mixtures - Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures (ISO 10156-2:2005)
- SS-EN-ISO-10298 - Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets (ISO 10298:2018)
- SS-EN-ISO-10298-AM1 - Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets - Amendment 1 (ISO 10298:2018/Amd 1:2021)
- SS-EN-ISO-13338 - Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet (ISO 13338:2022)
- SS-EN-ISO-14175 - Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
- SS-EN-ISO-16526-3 - Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
- SS-EN-ISO-17268 - Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2019)
- SS-EN-ISO-21572 - Foodstuffs - Molecular biomarker analysis - Immunochemical methods for the detection and quantification of proteins (ISO 21572:2019)
- SS-ISO-10298 - Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets (ISO 10298:2018, IDT)
- SS-ISO-10298-AM1 - Gas cylinders Gases and gas mixtures Determination of toxicity for the selection of cylinder valve outlets Amendment 1 (ISO 10298:2018/Amd 1, IDT)
- SS-ISO-13338 - Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets (ISO 13338:2017, IDT)
- SS-ISO-13984 - Liquid hydrogen - Land vehicle fuelling system interface (ISO 13984:1999, IDT)
- SS-ISO-13985 - Liquid hydrogen - Land vehicle fuel tanks (ISO 13985:2006, IDT)
- SS-ISO-14687 - Hydrogen fuel quality - Product specification (ISO 14687:2019, IDT)
- SS-ISO-16110-1 - Hydrogen generators using fuel processing technologies - Part 1: Safety (ISO 16110-1:2007, IDT)
- SS-ISO-16110-2 - Hydrogen generators using fuel processing technologies Part 2: Test methods for performance (ISO 16110-2:2010, IDT)
- SS-ISO-16111 - Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride (ISO 16111:2018, IDT)
- SS-ISO-19880-1 - Gaseous hydrogen - Fuelling stations - Part 1: General requirements (ISO 19880-1:2020, IDT)
- SS-ISO-19880-5 - Gaseous hydrogen - Fuelling stations - Part 5: Dispenser hoses and hose assemblies (ISO 19880-5:2019, IDT)
- SS-ISO-19880-8 - Gaseous hydrogen - Fuelling stations - Part 8: Fuel quality control (ISO 19880-8:2019, IDT)
- SS-ISO-19881 - Gaseous hydrogen - Land vehicle fuel containers (ISO 19881:2018, IDT)
- SS-ISO-22734 - Hydrogen generators using water electrolysis - Industrial, commercial, and residential applications (ISO 22734:2019, IDT)
- SS-ISO-26142 - Hydrogen detection apparatus - Stationary applications (ISO 26142:2010, IDT)
- SS-ISO-8085-2 - Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings
- SS-ISO-8573-1 - Compressed air - Part 1: Contaminants and purity classes (ISO 8573-1:2010, IDT)
- SS-ISO-8573-2 - Compressed air Contaminant measurement Part 2: Oil aerosol content (ISO 8573-2:2018, IDT)
- SS-ISO-8573-3 - Compressed air - Part 3: Test methods for measurement of humidity
- SS-ISO-8573-4 - Compressed air - Test methods for solid particle content
- SS-ISO-8573-6 - Compressed air - Part 6: Test methods for gaseous contaminant content
- SS-ISO-8573-7 - Compressed air - Part 7: Test method for viable microbiological contaminant content
- SS-ISO-8573-8 - Compressed air - Part 8: Test methods for solid particle content by mass concentration (ISO 8573-8:2004, IDT)
- SS-ISO-8573-9 - Compressed air - Part 9: Test methods for liquid water content (ISO 8573-9:2004, IDT)