Document Center List of Standards on Surface Active Agents
ICS Code 71.100.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D1172 - Standard Guide for pH of Aqueous Solutions of Soaps and Detergents
- ASTM-D1173 - Standard Test Method for Foaming Properties of Surface-Active Agents
- ASTM-D1279 - Standard Test Method for Buffering Action of Metal Cleaners (Withdrawn 1999)
- ASTM-D1280 - Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners (Withdrawn 2023)
- ASTM-D1281 - Test Method for Rinsing Properties of Metal Cleaners (Withdrawn 1988)
- ASTM-D1290 - Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
- ASTM-D1331 - Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
- ASTM-D1569 - Standard Test Methods for Detergent Alkylate (Withdrawn 2023)
- ASTM-D1570 - Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates
- ASTM-D1681 - Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure (Withdrawn 2023)
- ASTM-D1767 - Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents
- ASTM-D1768 - Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
- ASTM-D1782 - Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
- ASTM-D2023 - Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
- ASTM-D2024 - Standard Test Method for Cloud Point of Nonionic Surfactants
- ASTM-D2076 - Standard Test Methods for Acid Value and Amine Value of Fatty Quaternary Ammonium Chlorides (Withdrawn 2007)
- ASTM-D2078 - Standard Test Method for Iodine Value of Fatty Quaternary Ammonium Chlorides (Withdrawn 2003)
- ASTM-D2187 - Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins
- ASTM-D2281 - Standard Test Method for Evaluation of Wetting Agents by the Skein Test
- ASTM-D2357 - Standard for Qualitative Classification of Surfactants by Infrared Absorption
- ASTM-D2358 - Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
- ASTM-D2667 - Standard Test Method for Biodegradability of Alkylbenzene Sulfonates (Withdrawn 2013)
- ASTM-D2687 - Standard Practices for Sampling Particulate Ion-Exchange Materials
- ASTM-D2760 - Standard Test Method for Analysis of Sodium Triphosphate by the Simplified Paper Chromatographic Method (Withdrawn 2000)
- ASTM-D2761 - Standard Test Method for Analysis of Sodium Triphosphate by the Simplified Ion Exchange Method (Withdrawn 2001)
- ASTM-D2959 - Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
- ASTM-D3046 - Standard Specification for Powdered Hand Cleaner (Soap with Borax) (Withdrawn 2001)
- ASTM-D3048 - Standard Test Method of Assay for Alkaline Protease
- ASTM-D3049 - Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
- ASTM-D3087 - Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
- ASTM-D3375 - Standard Test Method for Column Capacity of Particulate Mixed Bed Ion
Exchange Materials - ASTM-D3400 - Standard Specification for Liquid Sodium Silicates (Withdrawn 2001)
- ASTM-D3494 - Standard Specification for Water-Emulsion Floor Polish Remover (Withdrawn 2000)
- ASTM-D3598 - Standard Test Method for Citrate in Synthetic Detergents
- ASTM-D3942 - Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
- ASTM-D4008 - Standard Guide for Measuring Anti-Soil Deposition Properties of Laundry Detergents
- ASTM-D4009 - Standard Guide for Foam Stability of Hand Dishwashing Detergents
- ASTM-D4224 - Test Method for Anionic Detergent by Para-Toluidine Hydrochloride (Withdrawn 1995)
- ASTM-D4251 - Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
- ASTM-D4265 - Standard Guide for Evaluating Stain Removal Performance in Home Laundering
- ASTM-D4266 - Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
- ASTM-D4337 - Standard Test Methods for Analysis of Linear Detergent Alkylates
- ASTM-D4456 - Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins
- ASTM-D4488 - Standard Guide for Testing Cleaning Performance of Products Intended for Use on Resilient Flooring and Washable Walls (Withdrawn 2009)
- ASTM-D4548 - Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
- ASTM-D457 - Standard Specification for Modified Soda (Sesquicarbonate Type) (Withdrawn 2001)
- ASTM-D458 - Standard Specification for Soda Ash (Withdrawn 2001)
- ASTM-D459 - Standard Terminology Relating to Soaps and Other Detergents
- ASTM-D460 - Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products (Withdrawn 2023)
- ASTM-D4608 - Standard Test Method for Citrate in Detergents
- ASTM-D4921 - Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
- ASTM-D4954 - Standard Test Method for Determination of Nitrilotriacetates in Detergents
- ASTM-D500 - Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
- ASTM-D501 - Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents
- ASTM-D502 - Standard Test Method for Particle Size of Soaps and Other Detergents
- ASTM-D5042 - Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins (Withdrawn 2018)
- ASTM-D5217 - Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
- ASTM-D5237 - Standard Guide for Evaluating Fabric Softeners
- ASTM-D5343 - Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners
- ASTM-D537 - Standard Specification for Sodium Metasilicate (Withdrawn 2001)
- ASTM-D538 - Standard Specification for Trisodium Phosphate (Withdrawn 2001)
- ASTM-D5547 - Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
- ASTM-D5558 - Standard Test Method for Determination of the Saponification Value of Fats and Oils
- ASTM-D594 - Standard Specification for Sodium Sesquisilicate (Withdrawn 2001)
- ASTM-D595 - Standard Specification for Tetrasodium Pyrophosphate (Anhydrous) (Withdrawn 2001)
- ASTM-D6361 - Standard Guide for Selecting Cleaning Agents and Processes
- ASTM-D7503 - Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
- ASTM-D7513 - Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges
- ASTM-D7742 - Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ 12) in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spectrometry (LC/MS/MS)
- ASTM-D800 - Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions (Withdrawn 2023)
- ASTM-D820 - Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
- ASTM-D930 - Standard Test Method of Total Immersion Corrosion Test of Water-Soluble Aluminum Cleaners (Withdrawn 2001)
- ASTM-E1174 - Standard Test Method for Evaluation of the Effectiveness of Healthcare Personnel Handwash Formulations
- ASTM-E1196 - Test Method for Determining the Anaerobic Biodegradation Potential of Organic Chemicals (Withdrawn 1998)
- ASTM-E1874 - Standard Test Method for Recovery of Microorganisms From Skin using the Cup Scrub Technique
- ASTM-E1882 - Standard Test Method for Evaluation of Antimicrobial Formulations by the Agar Patch Technique (Withdrawn 2019)
- ASTM-E1883 - Standard Practice for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique
- ASTM-E2966 - Standard Test Method for Quantitative Assessment of Sanitizing Solutions for Carpet
- ASTM-F3159 - Standard Safety Specification for Liquid Laundry Packets
- ASTM-F503 - Practice for Preparing Aircraft Cleaning Compounds (Withdrawn 1988)
- ASTM-G121 - Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
- ASTM-G122 - Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
- ASTM-G127 - Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems
BSI:
- BS-1715-1 - Analysis of soaps
- BS-1715-2.1 - Analysis of soaps. Quantitative test methods
- BS-1715-2.11 - Analysis of soaps. Quantitative test methods
- BS-1715-2.2 - Analysis of soaps. Quantitative test methods
- BS-1715-2.3 - Analysis of soaps. Quantitative test methods
- BS-1715-2.4 - Analysis of soaps. Quantitative test methods
- BS-1715-2.5 - Analysis of soaps. Quantitative test methods
- BS-1715-2.6 - Analysis of soaps. Quantitative test methods
- BS-1715-2.7 - Analysis of soaps. Quantitative test methods. Method for determination of chloride content
- BS-1715-2.8 - Analysis of soaps. Quantitative test methods
- BS-1715-2.9 - Analysis of soaps. Quantitative test methods.
- BS-1911 - Specification for hard soap
- BS-1912 - Specification for soap flakes
- BS-1913 - Specification for soft soap
- BS-1914 - Specification for toilet soap
- BS-3762 - Methods of sampling and testing detergents
- BS-3762-0 - Analysis of formulated detergents
- BS-3762-3.12 - Analysis of formulated detergents
- BS-3762-3.13 - Analysis of formulated detergents. Quantitative test methods
- BS-3762-3.14 - Analysis of formulated detergents
- BS-3762-3.15 - Analysis of formulated detergents
- BS-3762-3.16 - Analysis of formulated detergents
- BS-3762-3.21 - Analysis of formulated detergents. Quantitative test methods
- BS-3762-3.22 - Analysis of formulated detergents. Quantitative test methods
- BS-3762-3.24 - Analysis of formulated detergents
- BS-3762-3.5 - Analysis of formulated detergents
- BS-3762-3.6 - Analysis of formulated detergents
- BS-3762-3.7 - Analysis of formulated detergents
- BS-3762-3.8 - Analysis of formulated detergents
- BS-4088 - Specification for carpet shampoos
- BS-4088-1.1 - Carpet cleaning products. Methods of sampling and test. General methods for formulations used in liquid form
- BS-4088-1.2 - Carpet cleaning products. Methods of sampling and test
- BS-4088-1.3 - Carpet cleaning products. Methods of sampling and test
- BS-4088-2 - Carpet cleaning products
- BS-4088-3 - Carpet cleaning products
- BS-4088-4 - Carpet cleaning products
- BS-4405 - Specification for liquid soap
- BS-4498 - Method for determination of the Kappa number of pulp (degree of delignification)
- BS-6585 - Guide for comparative testing of performance of detergents for domestic machine dishwashing
- BS-6829-0 - Analysis of surface active agents (raw materials)
- BS-6829-1.1 - Analysis of surface active agents (raw materials). General methods. Method for determination of mineral sulphate content
- BS-6829-1.6 - Analysis of surface active agents (raw materials). General methods. Method for determination of solubility in water
- BS-6829-2.3 - Analysis of surface active agents (raw materials). Alkane sulphonates. Method for determination of alkane monosulphonates content
- BS-6829-5.1 - Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates
- BS-6829-5.2 - Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates. Method for estimation of mean relative molecular mass
- BS-EN-12582 - Surface active agents. Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
- BS-EN-12728 - Surface active agents. Determination of foaming power. Perforated disc beating method
- BS-EN-12829 - Surface active agents. Preparation of water with known calcium and magnesium hardness
- BS-EN-12836 - Surface active agents. Determination of the water number of alkoxylated products
- BS-EN-12974 - Surface active agents. Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure
- BS-EN-13267 - Surface active agents. Determination of water content. Karl Fischer method
- BS-EN-13268 - Surface active agents. Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adductspylene
- BS-EN-13270 - Surface active agents. Determination of the active matter content in alkyldimethylbetaines
- BS-EN-13273 - Surface active agents. Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC)
- BS-EN-13320 - Surface active agents. Gas chromatographic trace determination of free ethylene oxide in ethoxylates
- BS-EN-13405 - Surface active agents. Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC)
- BS-EN-13435 - Surface active agents. Determination of free amine content of alkyl dimethyl betaines
- BS-EN-13560 - Surface active agents. Determination of amide nitrogen content. Potentiometric titration
- BS-EN-13716 - Surface active agents. Determination of total base nitrogen. Potentiometric titration
- BS-EN-13717 - Surface active agents. Determination of primary, secondary and tertiary amino nitrogen. Potentiometric titration
- BS-EN-13955 - Surface active agents. Determination of Krafft point and solubility of ionic surface active agents
- BS-EN-13996 - Surface active agents. Foaming power and antifoaming power. Turbine stirring method
- BS-EN-14210 - Surface active agents. Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method
- BS-EN-14370 - Surface active agents. Determination of surface tension
- BS-EN-14371 - Surface active agents. Determination of foamability and degree of foamability. Circulation test method
- BS-EN-14480 - Surface active agents. Determination of anionic surface active agents. Potentiometric two-phase titration method
- BS-EN-14666 - Surface active agents. Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules. Gas chromatographic method
- BS-EN-14667 - Surface active agents. Determination of low boiling solvents in liquid formulations. Gas chromatographic method
- BS-EN-14668 - Surface active agents. Determination of quaternary ammonium surface active agents in raw materials and formulated products. Potentiometric two-phase titration method
- BS-EN-14669 - Surface active agents. Determination of anionic surface active agents and soaps in detergents and cleansers. Potentiometric two-phase titration method
- BS-EN-14670 - Surface active agents. Sodium dodecyl sulfate. Analytical method
- BS-EN-14712 - Surface active agents. Determination of physical stability in alkaline and acid solutions
- BS-EN-14880 - Surface active agents. Determination of inorganic sulfate content in anionic surface active agents. Potentiometric lead selective electrode titration method
- BS-EN-14881 - Surface active agents. Determination of N-(3-dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines. Gas chromatographic method
- BS-EN-14981 - Surface active agents. Determination of content of high boiling solvents in liquid detergents by GLC
- BS-EN-15109 - Surface active agents. Determination of the active matter content of alkylamidopropylbetaines
- BS-EN-15168 - Surface active agents. Determination of hydroxyl value. p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide
- BS-EN-15647 - Surface active agents. Determination of the dispersing effect of surfactants on powder
- BS-EN-17035 - Surface active agents. Bio-based surfactants. Requirements and test methods
- BS-EN-17035-TC - Tracked Changes. Surface active agents. Bio-based surfactants. Requirements and test methods
- BS-EN-1772 - Surface active agents. Determination of wetting power by immersion
- BS-EN-1890 - Surface active agents. Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
- BS-EN-ISO-14881-TC - Tracked Changes. Integrated optics. Interfaces. Parameters relevant to coupling properties
- BS-EN-ISO-19296 - Mining. Mobile machines working underground. Machine safety
- BS-EN-ISO-2870 - Surface active agents. Detergents. Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions
- BS-EN-ISO-2871-1 - Surface active agents. Detergents. Determination of cationic-active matter content
- BS-EN-ISO-2871-2 - Surface active agents. Detergents. Determination of cationic-active matter content
- BS-EN-ISO-6845 - Surface active agents. Technical alkane sulfonates. Determination of mean relative molecular mass and content of the alkane monosulphonates and the alkane monosulfonate content
- BS-EN-ISO-8799 - Surface active agents. Sulfated ethoxylated alcohols and alkylphenols. Determination of content of unsulfated matter
- BS-ISO-16560 - Surface active agents. Determination of polyethylene glycol content in nonionic ethoxylated surfactants. HPLC method
- BS-ISO-17280 - Surface active agents. Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography
- BS-ISO-17293-1 - Surface active agents. Determination of chloroacetic acid (chloroacetate) in surfactants
- BS-ISO-17293-2 - Surface active agents. Determination of chloroacetic acid (chloroacetate) in surfactants
- BS-ISO-19619 - Surface active agents. Determination of free propylene oxide content in propylene oxide adduct surfactants. GC method
- BS-ISO-21264 - Surface active agents. Detergents. Determination of alkylphenol ethoxylates
- BS-ISO-21703 - Surface active agents. Microbiology. Microbiological test methods for liquid hand dishwashing
- BS-ISO-23324 - Surface active agents. Fabric conditioners. Determination of antistatic performance
- BS-ISO-4323 - Soaps. Determination of chloride content. Potentiometric method
- PD-CEN-17035 - Surface Active Agents. Bio-based surfactants. Requirements and test methods
- PD-CEN-17557 - Surface active agents. Bio-based surfactants. Overview on bio-based surfactants
ISO:
- ISO-1063 - Surface active agents -- Determination of stability in hard water
- ISO-1064 - Surface active agents -- Determination of apparent density of pastes on filling
- ISO-1065 - Non-ionic surface-active agents obtained from ethylene oxide and mixed non-ionic surface-active agents -- Determination of cloud point
- ISO-1066 - Analysis of soaps -- Determination of glycerol content -- Titrimetric method
- ISO-1067 - Analysis of soaps -- Determination of unsaponifiable, unsaponified and unsaponified saponifiable matter
- ISO-1104 - Surface active agents -- Technical sodium alkylarylsulphonates (excluding benzene derivatives) -- Methods of analysis
- ISO-16560 - Surface active agents - Determination of polyethylene glycol content in nonionic ethoxylated surfactants - HPLC method
- ISO-17280 - Surface active agents - Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography
- ISO-17293-1 - Surface active agents - Determination of chloroacetic acid (chloroacetate) in surfactants - Part 1: HPLC method
- ISO-17293-2 - Surface active agents - Determination of chloroacetic acid (chloroacetate) in surfactants - Part 2: Ionic chromatographic method
- ISO-19619 - Surface active agents - Determination of free propylene oxide content in propylene oxide adduct surfactants - GC method
- ISO-21264 - Surface active agents - Detergents - Determination of alkylphenol ethoxylates
- ISO-2131 - Surface active agents -- Simplified classification
- ISO-21703 - Surface active agents - Microbiology - Microbiological test methods for liquid hand dishwashing
- ISO-2174 - Surface active agents -- Preparation of water with known calcium hardness
- ISO-2267 - Surface active agents -- Evaluation of certain effects of laundering -- Methods of preparation and use of unsoiled cotton control cloth
- ISO-2268 - Surface active agents (non-ionic) -- Determination of polyethylene glycols and non-ionic active matter (adducts) -- Weibull method
- ISO-2270 - Non-ionic surface active agents -- Polyethoxylated derivatives -- Iodometric determination of oxyethylene groups
- ISO-2271 - Surface active agents -- Detergents -- Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure
- ISO-2272 - Surface active agents -- Soaps -- Determination of low contents of free glycerol by molecular absorption spectrometry
- ISO-23324 - Surface active agents - Fabric conditioners - Determination of antistatic performance
- ISO-2456 - Surface active agents -- Water used as a solvent for tests -- Specification and test methods
- ISO-2868 - Surface active agents -- Detergents -- Anionic-active matter stable to acid hydrolysis -- Determination of trace amounts
- ISO-2869 - Surface active agents -- Detergents -- Anionic-active matter hydrolyzable under alkaline conditions -- Determination of hydrolyzable and non-hydrolyzable anionic-active matter
- ISO-2870 - Surface active agents - Detergents - Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions
- ISO-2871-1 - Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
- ISO-2871-2 - Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
- ISO-304 - Surface active agents -- Determination of surface tension by drawing up liquid films
- ISO-4198 - Surface active agents -- Detergents for hand dishwashing -- Guide for comparative testing of performance
- ISO-4311 - Anionic and non-ionic surface active agents -- Determination of the critical micellization concentration -- Method by measuring surface tension with a plate, stirrup or ring
- ISO-4312 - Surface active agents -- Evaluation of certain effects of laundering -- Methods of analysis and test for unsoiled cotton control cloth
- ISO-4313 - Washing powders -- Determination of total phosphorus(V) oxide content -- Quinoline phosphomolybdate gravimetric method
- ISO-4314 - Surface active agents -- Determination of free alkalinity or free acidity -- Titrimetric method
- ISO-4315 - Surface active agents -- Determination of alkalinity -- Titrimetric method
- ISO-4316 - Surface active agents -- Determination of pH of aqueous solutions -- Potentiometric method
- ISO-4317 - Surface-active agents and detergents - Determination of water content - Karl Fischer methods
- ISO-4318 - Surface active agents and soaps -- Determination of water content -- Azeotropic distillation method
- ISO-4319 - Surface active agents -- Detergents for washing fabrics -- Guide for comparative testing of performance
- ISO-4320 - Non-ionic surface active agents -- Determination of cloud point index -- Volumetric method
- ISO-4321 - Washing powders -- Determination of active oxygen content -- Titrimetric method
- ISO-4322 - Non-ionic surface active agents -- Determination of sulphated ash -- Gravimetric method
- ISO-4323 - Soaps - Determination of chloride content - Potentiometric method
- ISO-4324 - Surface active agents -- Powders and granules -- Measurement of the angle of repose
- ISO-4325 - Soaps and detergents -- Determination of chelating agent content -- Titrimetric method
- ISO-4326 - Non-ionic surface active agents -- Polyethoxylated derivatives -- Determination of hydroxyl value -- Acetic anhydride method
- ISO-4327 - Non-ionic surface active agents -- Polyalkoxylated derivatives -- Determination of hydroxyl value -- Phthalic anhydride method
- ISO-456 - Surface active agents -- Analysis of soaps -- Determination of free caustic alkali
- ISO-457 - Soaps -- Determination of chloride content -- Titrimetric method
- ISO-607 - Surface active agents and detergents -- Methods of sample division
- ISO-6121 - Surface active agents -- Technical alkane sulfonates -- Determination of alkane monosulfonates content by direct two-phase titration
- ISO-6122 - Surface active agents -- Technical alkane sulphonates -- Determination of total alkane sulphonates content
- ISO-6384 - Surface active agents -- Technical ethoxylated fatty amines -- Methods of analysis
- ISO-6387 - Surface active agents -- Determination of the power to disperse calcium soap -- Acidimetric method (Modified Schoenfeldt method)
- ISO-6388 - Surface active agents -- Determination of flow properties using a rotational viscometer
- ISO-672 - Soaps -- Determination of moisture and volatile matter content -- Oven method
- ISO-673 - Soaps -- Determination of content of ethanol-insoluble matter
- ISO-6835 - Surface active agents -- Washing powders -- Determination of total boron content -- Titrimetric method
- ISO-6836 - Surface active agents -- Mercerizing agents -- Evaluation of the activity of wetting products for mercerization by determination of the shrinkage rate of cotton
- ISO-6837 - Surface active agents -- Water dispersing power in dry cleaning solvents
- ISO-6839 - Anionic surface active agents -- Determination of solubility in water
- ISO-684 - Analysis of soaps -- Determination of total free alkali
- ISO-6840 - Cationic surface active agents (Hydrochlorides and hydrobromides) -- Determination of critical micellization concentration -- Method by measurement of counter ion activity
- ISO-6841 - Surface active agents -- Technical straight-chain sodium alkylbenzenesulfonates -- Determination of mean relative molecular mass by gas-liquid chromatography
- ISO-6842 - Surface active agents -- Sulfated ethoxylated alcohols and alkylphenols -- Determination of total active matter content
- ISO-6843 - Surface active agents -- Sulfated ethoxylated alcohols and alkylphenols -- Estimation of the mean relative molecular mass
- ISO-6844 - Surface active agents -- Determination of mineral sulfate content -- Titrimetric method
- ISO-6845 - Surface active agents -- Technical alkane sulfonates -- Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content
- ISO-685 - Analysis of soaps - Determination of total alkali content and total fatty matter content
- ISO-6889 - Surface active agents -- Determination of interfacial tension by drawing up liquid films
- ISO-696 - Surface active agents -- Measurement of foaming power -- Modified Ross-Miles method
- ISO-697 - Surface active agents -- Washing powders -- Determination of apparent density -- Method by measuring the mass of a given volume
- ISO-7535 - Surface active agents -- Detergents for domestic machine dishwashing -- Guide for comparative testing of performance
- ISO-8022 - Surface active agents -- Determination of wetting power by immersion
- ISO-8212 - Soaps and detergents -- Techniques of sampling during manufacture
- ISO-8214 - Surface active agents -- Washing powders -- Determination of inorganic sulfates -- Gravimetric method
- ISO-8215 - Surface active agents -- Washing powders -- Determination of total silica content -- Gravimetric method
- ISO-862 - Surface active agents -- Vocabulary
- ISO-8799 - Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter
- ISO-893 - Surface active agents -- Technical alkane sulfonates -- Methods of analysis
- ISO-894 - Surface active agents -- Technical sodium primary alkylsulphates -- Methods of analysis
- ISO-895 - Surface active agents -- Technical sodium secondary alkylsulphates -- Methods of analysis
- ISO-9101 - Surface active agents -- Determination of interfacial tension -- Drop volume method
Other SDOs:
- DIN-54402 - Testing of Ion Exchangers - Determination of the Total Capacity of Anion Exchangers
- DIN-54403 - Testing of Ion Exchangers - Determination of the Total Capacity of Cation Exchangers
- DIN-EN-14370 - Surface Active Agents, Determination of Surface Tension
- DIN-EN-14371 - Surface Active Agents, Determination of Foamability & Degree of Foamability, Circulati
- DIN-EN-14480 - Surface Active Agents, Determination of Anionic Surface Active Agents, Potentiometric
- DIN-EN-14666 - Surface Active Agents, Determination of Tetraacetyl Ethylene Diamine (Taed) Content In
- DIN-EN-14667 - Surface Active Agents, Determination of Low Boiling Solvents in Liquid Formulations, G
- DIN-EN-14668 - Surface Active Agents, Determination of Quaternary Ammonium Surface Active Agents In
- DIN-EN-14669 - Surface Active Agents, Determination of Anionic Surface Active Agents & Soaps in Deter
- DIN-EN-14670 - Surface Active Agents, Sodium Dodecyl Sulfate - Analytical Method
- DIN-EN-14712 - Surface Active Agents, Determination of Physical Stability in Alkaline & Acid Solution
- DIN-EN-14880 - Surface Active Agents, Determination of Inorganic Sulphate Content in Anionic Surface
- DIN-EN-14881 - Surface Active Agents, Determination of N-(3-Dimethylaminopropyl)-Alkylamide Content I
- DIN-EN-14981 - Surface Active Agents - Determination of Content of High Boiling Solvents in Liquid De
- DIN-EN-15109 - Surface Active Agents - Determination of the Active Matter Content of Alkylamidopropyl
- DIN-EN-15168 - Surface Active Agents - Determination of Hydroxyl Value - P-Toluensulfonyl Isocyanate
- DIN-EN-1890 - Surface Active Agents - Determination of Cloud Point of Non-Ionic Surface Active Agent
- DIN-EN-ISO-6845 - Surface Active Agents - Technical Alkane Sulfonates, Determination of the Mean Relativ
- EN-12829 - Surface active agents - Preparation of water with known calcium and magnesium hardness
- EN-12836 - Surface Active Agents, Determination of the Water Number of Alkoxylated Products
- EN-13267 - Surface Active Agents, Determination of Water Content - Karl Fischer Method
- EN-13320 - Surface Active Agents, Gas Chromatographic Trace Determination of Free Ethylene Oxide
- EN-14210 - Surface Active Agents, Determination of Interfacial Tension of Solutions of Surface A
- EN-14370 - Surface Active Agents, Determination of Surface Tension
- EN-14371 - Surface Active Agents, Determination of Foamability & Degree of Foamability, Circulati
- EN-14480 - Surface Active Agents, Determination of Anionic Surface Active Agents, Potentiometric
- EN-14666 - Surface Active Agents, Determination of Tetraacetyl Ethylene Diamine (Taed) Content In
- EN-14667 - Surface Active Agents, Determination of Low Boiling Solvents in Liquid Formulations, G
- EN-14668 - Surface Active Agents, Determination of Quaternary Ammonium Surface Active Agents In
- EN-14669 - Surface Active Agents, Determination of Anionic Surface Active Agents & Soaps in Deter
- EN-14670 - Surface Active Agents, Sodium Dodecyl Sulfate - Analytical Method
- EN-14712 - Surface Active Agents, Determination of Physical Stability in Alkaline & Acid Solution
- EN-14880 - Surface Active Agents, Determination of Inorganic Sulphate Content in Anionic Surface
- EN-14881 - Surface Active Agents, Determination of N-(3-Dimethylaminopropyl)-Alkylamide Content I
- EN-14981 - Surface Active Agents - Determination of Content of High Boiling Solvents in Liquid De
- EN-15109 - Surface Active Agents - Determination of the Active Matter Content of Alkylamidopropyl
- EN-15168 - Surface Active Agents - Determination of Hydroxyl Value - P-Toluensulfonyl Isocyanate
- EN-15647 - Surface Active Agents, Determination of the Dispersing Effect of Surfactants on Powder
- EN-1890 - Surface Active Agents - Determination of Cloud Point of Non-Ionic Surface Active Agent
- EN-ISO-2870 - Surface Active Agents, Detergents, Determination of Anionic-Active Matter Hydrolysable
- EN-ISO-2871-1 - Part 1: High-Molecular-Mass CATIONIC-Active Matter, Surface Active Agents - Detergent
- EN-ISO-2871-2 - Part 2: CATIONIC-Active Matter of Low Molecular Mass, Surface Active Agents - Detergen
- EN-ISO-8799 - Surface Active Agents - Sulfated Ethoxylated Alcohols & Alkylphenols - Determination O
- SS-EN-10293 - Steel castings - Steel castings for general engineering uses
- SS-EN-12139 - Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC
- SS-EN-12458 - Surface active agents - Determination of stability in hard water
- SS-EN-12582 - Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
- SS-EN-1262 - Surface active agents - Determination of pH value of solutions or dispersions
- SS-EN-12728 - Surface active agents - Determination of foaming power - Perforated disc beating method
- SS-EN-12829 - Surface active agents - Preparation of water with known calcium and magnesium hardness
- SS-EN-12836 - Surface active agents - Determination of the water number of alkoxylated products
- SS-EN-12974 - Surface active agents - Determination of the 1,4-dioxane content in the alkyl-ethoxy-solfate products by GLC/head space procedure
- SS-EN-13267 - Surface active agents - Determination of water content - Karl Fischer method
- SS-EN-13268 - Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts
- SS-EN-13270 - Surface active agents - Determination of the active matter content in alkyldimethylbetaines
- SS-EN-13273 - Surface active agents - Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC)
- SS-EN-13320 - Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates
- SS-EN-13405 - Surface active agents - Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC)
- SS-EN-13435 - Surface active agents - Determination of free amine content of alkyl dimethyl betaines
- SS-EN-13560 - Surface active agents - Determination of amide nitrogen content - Potentiometric titration
- SS-EN-13716 - Surface active agents - Determination of total base nitrogen - Potentiometric titration
- SS-EN-13717 - Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration
- SS-EN-13926 - Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value - N-methyl imidazole method
- SS-EN-13955 - Surface active agents - Determination of Krafft point and solubility of ionic surface active agents
- SS-EN-13996 - Surface active agents - Foaming power and antifoaming power - Turbine stirring method
- SS-EN-14210 - Surface active agents - Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method
- SS-EN-14370 - Surface active agents - Determination of surface tension
- SS-EN-14371 - Surface active agents - Determination of foamability and degree of foamability - Circulation test method
- SS-EN-14480 - Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
- SS-EN-14604 - Smoke alarm devices
- SS-EN-14666 - Surface active Agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method
- SS-EN-14667 - Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method
- SS-EN-14668 - Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
- SS-EN-14669 - Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method
- SS-EN-14670 - Surface active agents - Sodium dodecyl sulfate - Analytical method
- SS-EN-14712 - Surface active agents - Determination of physical stability in alkaline and acid solutions
- SS-EN-14880 - Surface active agents - Determination of inorganic sulfate content in anionic surface active agents - Potentiometric lead selective electrode titration method
- SS-EN-14881 - Surface active agents - Determination of N-(3-dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines - Gas chromatographic method
- SS-EN-14981 - Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC
- SS-EN-15109 - Surface active agents - Determination of the active matter content of alkylamidopropylbetaines
- SS-EN-15168 - Surface active agents - Determination of hydroxyl value - p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide
- SS-EN-1557 - Surface active agents - Colometric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission
- SS-EN-15608 - Surface active agents - Quantitative determination of free fatty acid in alkylamidopropylbetaines - Gas- chromatographic method
- SS-EN-15647 - Surface active agents - Determination of the dispersing effect of surfactants on powder
- SS-EN-17035 - Surface active agents - Bio-based surfactants - Requirements and test methods
- SS-EN-1772 - Surface active agents - Determination of wetting power by immersion (ISO 8022:1990 modified)
- SS-EN-1791 - Surface active agents - Fatty alkyl dimethyl amine oxides - Determinationof the amine oxide content
- SS-EN-1890 - Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
- SS-EN-1999-1-5 - Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
- SS-EN-539-2 - Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2: Test for frost resistance
- SS-EN-ISO-2870 - Surface active agents - Detergents - Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions (ISO 2870:2009)
- SS-EN-ISO-2871-1 - Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)
- SS-EN-ISO-2871-2 - Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)
- SS-EN-ISO-4320 - Non-ionic, surface active agents - Determination of cloud point index - Volumetric method (ISO 4320:1977, including Eratum:1980)
- SS-EN-ISO-6845 - Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989)
- SS-EN-ISO-862 - Surface active agents - Vocabulary - Trillingual version (ISO 862:1984/Cor 1:1993)
- SS-EN-ISO-8799 - Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter (ISO 8799:2009)
- SS-ENV-12836 - Apparatus for dairy analyses; milk butyrometer 0 to 10 %, calibrated
- SS-ISO-11992-4 - Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 4: Diagnostic communication (ISO 11992-4:2023, IDT)