Document Center List of Standards on Mining And Quarrying Including Exploration, Opening-Up, Development, Working Of Mineral Deposits, Drilling, Construction Of Mines, Mining Operations, Processing Of Minerals, Etc.
ICS Code 73.020
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-C119 - Standard Terminology Relating to Dimension Stone
- ASTM-D6234 - Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
- ASTM-D7384 - Standard Practice for Minimum Geospatial Data for a Surface Coal Mining Permit Boundary (Withdrawn 2013)
- ASTM-D7443 - Standard Practice for Minimum Geospatial Data for Underground Coal Mining Extents (Withdrawn 2013)
- ASTM-D7533 - Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Area (Withdrawn 2013)
- ASTM-D7534 - Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Planning Unit (Withdrawn 2013)
- ASTM-D7627 - Standard Practice for Minimum Geospatial Data for Land Reclamation and Performance Bond Status of a Permitted Coal Mine (Withdrawn 2013)
- ASTM-D7628 - Standard Practice for Minimum Geospatial Data for Lands Unsuitable for Mining Petitions and Designated Areas (Withdrawn 2013)
- ASTM-D7629 - Standard Practice for Minimum Geospatial Data for Representing Coal Spoil and Refuse Features (Withdrawn 2013)
- ASTM-D7630 - Standard Practice for Minimum Geospatial Data for Postmining Land Uses (Withdrawn 2013)
- ASTM-D7631 - Standard Practice for Minimum Geospatial Data for a Coal Mining Environmental Resource Monitoring Location (Withdrawn 2013)
- ASTM-D7699 - Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites
- ASTM-D7780 - Standard Practice for Minimum Geospatial Data for Representing Coal Mining Features
- ASTM-D8155 - Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water
- ASTM-D8215 - Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources
- ASTM-E2278 - Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage
BSI:
- BS-5228-3 - Code of Practice Applicable To Surface Coal Extraction by Opencast Methods
- BS-542 - Specification for cable glands and sealing boxes for association with apparatus for use at mines and quarries
- BS-5754 - Specification for electrical analogue and state signals for use in coal mines
- BS-EN-12371 - Natural stone test methods. Determination of frost resistance
- BS-EN-12372-TC - Tracked Changes. Natural stone test methods. Determination of flexural strength under concentrated load
- BS-EN-12407 - Natural stone test methods. Petrographic examination
- BS-EN-13161 - Natural stone test methods. Determination of flexural strength under constant moment
- BS-EN-13755 - Natural stone test methods. Determination of water absorption at atmospheric pressure
- BS-EN-13919 - Natural stone test methods. Determination of resistance to ageing by SO2 action in the presence of humidity
- BS-EN-14066 - Natural stone test methods. Determination of resistance to ageing by thermal shock
- BS-EN-14147 - Natural stone test methods. Determination of resistance to ageing by salt mist
- BS-EN-14157 - Natural stone test methods. Determination of the abrasion resistance
- BS-EN-14157-TC - Tracked Changes. Natural stone test methods. Determination of the abrasion resistance
- BS-EN-14579 - Natural stone test methods. Determination of sound speed propagation
- BS-EN-14580 - Natural stone test methods. Determination of static elastic modulus
- BS-EN-14581 - Natural stone test methods. Determination of linear thermal expansion coefficient
- BS-EN-1467 - Natural stone. Rough blocks. Requirements
- BS-EN-1467-TC - Tracked Changes. Natural stone. Rough blocks. Requirements
- BS-EN-1468 - Natural stone. Rough slabs. Requirements
- BS-EN-16301 - Natural stone test methods. Determination of sensitivity to accidental staining
- BS-EN-16306 - Natural stone test methods Determination of resistance of marble to thermal and moisture cycles
- BS-EN-16306-TC - Tracked Changes. Natural stone test methods. Determination of resistance of marble to thermal and moisture cycles
- BS-EN-1926 - Natural stone test methods. Determination of uniaxial compressive strength
- BS-EN-1936 - Natural stone test methods. Determination of real density and apparent density, and of total and open porosity
- BS-ISO-10753 - Coal preparation plant. Assessment of the liability to breakdown in water of materials associated with coal seams
- BS-ISO-18871 - Method of determining coalbed methane content
- BS-ISO-18875 - Coalbed methane exploration and development. Terms and definitions
- BS-ISO-19426-1 - Structures for mine shafts
- BS-ISO-19426-2 - Structures for mine shafts
- BS-ISO-19426-3 - Structures for mine shafts
- BS-ISO-19426-4 - Structures for mine shafts
- BS-ISO-19426-5 - Structures for mine shafts
- BS-ISO-19434 - Mining. Classification of mine accidents
- BS-ISO-19434-TC - Mining. Classification of mine accidents
- BS-ISO-20305 - Mine closure and reclamation. Vocabulary
- BS-ISO-21795-1 - Mine closure and reclamation planning
- BS-ISO-21795-2 - Mine closure and reclamation planning
- BS-ISO-22932-1 - Mining. Vocabulary
- BS-ISO-22932-2 - Mining. Vocabulary
- BS-ISO-22932-4 - Mining. Vocabulary
- BS-ISO-23664 - Traceability of rare earths in the supply chain from mine to separated products
- BS-ISO-23725 - Autonomous system and fleet management system interoperability
- BS-ISO-23872 - Mining structures. Underground structures
- BS-ISO-23875 - Mining. Air quality control systems for operator enclosures. Performance requirements and test methods
- BS-ISO-24419-1 - Mine closure and reclamation. Managing mining legacies
- BS-ISO-4657 - Assessment specification of coalbed methane resources
- PD-CEN-16365 - Characterization of waste. Sampling of waste from extractive industries
- PD-ISO-24419-2 - Mine closure and reclamation. Managing mining legacies
ISO:
- ISO-18871 - Method of determining coalbed methane content
- ISO-18875 - Coalbed methane exploration and development - Terms and definitions
- ISO-19426-1 - Structures for mine shafts - Part 1: Vocabulary
- ISO-19426-2 - Structures for mine shafts - Part 2: Headframe structures
- ISO-19426-3 - Structures for mine shafts - Part 3: Sinking stages
- ISO-19426-4 - Structures for mine shafts - Part 4: Conveyances
- ISO-19426-5 - Structures for mine shafts - Part 5: Shaft system structures
- ISO-19434 - Mining - Classification of mine accidents
- ISO-19434-AM1 - - Amendment 1
- ISO-20305 - Mine closure and reclamation - Vocabulary
- ISO-21795-1 - Mine closure and reclamation planning - Part 1: Requirements
- ISO-21795-2 - Mine closure and reclamation planning - Part 2: Guidance
- ISO-22932-1 - Mining - Vocabulary - Part 1: Planning and surveying
- ISO-22932-3 - Mining . Vocabulary - Part 3: Rock mechanics
- ISO-22932-4 - Mining - Vocabulary - Part 4: Prospecting and exploration
- ISO-22932-5 - Mining - Vocabulary - Part 5: Drilling and blasting
- ISO-23664 - Traceability of rare earths in the supply chain from mine to separated products
- ISO-23725 - Autonomous system and fleet management system interoperability
- ISO-23872 - Mining structures - Underground structures
- ISO-23875 - Mining - Air quality control systems for operator enclosures - Performance requirements and test methods
- ISO-23875-AM1 - - Amendment 1: Mining - Air quality control systems for operator enclosures - Performance requirements and test methods - Amendment 1
- ISO-24419-1 - Mine closure and reclamation . Managing mining legacies - Part 1: Requirements and recommendations
- ISO-24419-2 - Mine closure and reclamation . Managing mining legacies - Part 2: Case studies and bibliography
- ISO-4657 - Assessment specification of coalbed methane resources
Other SDOs:
- DIN-EN-12371 - Natural Stone Test Methods - Determination of Frost Resistance
- DIN-EN-12372 - Natural Stone Test Methods - Determination of Flexural Strength Under Concentrated Loa
- DIN-EN-12407 - Natural Stone Test Methods - Petrographic Examination
- DIN-EN-13161 - Natural Stone Test Methods, Determination of Flexural Strength Under Constant Moment,
- DIN-EN-13755 - Natural Stone Test Methods, Determination of Water Absorption at Atmospheric Pressure,
- DIN-EN-14066 - Natural stone test methods - Determination of resistance to ageing by thermal shock; German version EN 14066:2013
- DIN-EN-14146 - Natural Stone Test Methods, Determination of Dynamic Modulusof Elasticity (by Measurin
- DIN-EN-14157 - Natural Stone Test Methods, Determination of the Abrasion Resistance
- DIN-EN-14158 - Natural Stone Test Methods, Determination of Rupture Energy
- DIN-EN-14579 - Natural Stone Test Methods, Determination of Sound Speed Propagation
- DIN-EN-14580 - Natural Stone Test Methods, Determination of Static Elastic Modulus
- DIN-EN-14581 - Natural Stone Test Methods, Determination of Linear Thermal Expansion Coefficient
- DIN-EN-1467 - Natural stone - Rough blocks - Requirements
- DIN-EN-1468 - Natural stone - Rough slabs - Requirements
- DIN-EN-1926 - Natural Stone Test Methods - Determination of Uniaxial Compressive Strength
- DIN-EN-1936 - Natural Stone Test Methods - Determination of Real Density & Apparent Density, & of To
- EN-12371 - Natural Stone Test Methods - Determination of Frost Resistance
- EN-12372 - Natural Stone Test Methods - Determination of Flexural Strength Under Concentrated Loa
- EN-12407 - Natural Stone Test Methods - Petrographic Examination
- EN-13755 - Natural Stone Test Methods, Determination of Water Absorption at Atmospheric Pressure
- EN-14066 - Natural stone test methods - Determination of resistance to ageing by thermal shock
- EN-14147 - Natural Stone Test Methods, Determination of Resistance To Ageing by Salt Mist
- EN-14157 - Natural stone test methods - Determination of the abrasion resistance
- EN-14579 - Natural Stone Test Methods, Determination of Sound Propagation
- EN-14580 - Natural Stone Test Methods, Determination of Static Elastic Modulus
- EN-14581 - Natural Stone Test Methods, Determination of Linear Thermal Expansion Coefficient
- EN-1467 - Natural stone - Rough blocks - Requirements
- EN-1468 - Natural stone - Rough slabs - Requirements
- EN-16301 - Natural stone test methods - Determination of sensitivity to accidental staining
- EN-16306 - Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles
- EN-1926 - Natural Stone Test Methods - Determination of Uniaxial Compressive Strength
- EN-1936 - Natural Stone Test Methods - Determination of Real Density & Apparent Density, & of To
- SIS-CEN/TR-16365 - Characterization of waste - Sampling of waste from extractive industries
- SS-EN-12370 - Natural stone test methods - Determination of resistance to salt crystallisation
- SS-EN-12371 - Natural stone test methods - Determination of frost resistance
- SS-EN-12372 - Natural stone test methods - Determination of flexural strength under concentrated load
- SS-EN-12407 - Natural stone test methods - Petrographic examination
- SS-EN-12440 - Natural stone - Denomination criteria
- SS-EN-12670 - Natural stone - Terminology
- SS-EN-13161 - Natural stone test methods - Determination of flexural strength under constant moment
- SS-EN-13364 - Natural stone test methods - Determination of breaking load at dowel hole
- SS-EN-13373 - Natural stone test methods - Determination of geometric characteristics on units
- SS-EN-13755 - Natural stone test methods - Determination of water absorption at atmospheric pressure
- SS-EN-13919 - Natural stone test methods - Determination of resistance to ageing by SO2 action in the presence of humidity
- SS-EN-14066 - Natural stone test methods - Determination of resistance to ageing by thermal shock
- SS-EN-14146 - Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
- SS-EN-14147 - Natural stone test methods - Determination of resistance to ageing by salt mist
- SS-EN-14157 - Natural stone test methods - Determination of the abrasion resistance
- SS-EN-14158 - Natural stone test methods - Determination of rupture energy
- SS-EN-14205 - Natural stone test methods - Determination of Knoop hardness
- SS-EN-14231 - Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
- SS-EN-14579 - Natural stone test methods - Determination of sound speed propagation
- SS-EN-14580 - Natural stone test methods - Determination of static elastic modulus
- SS-EN-14581 - Natural stone test methods - Determination of linear thermal expansion coefficient
- SS-EN-1467 - Natural stone - Rough blocks - Requirements
- SS-EN-1468 - Natural stone - Rough slabs - Requirements
- SS-EN-16301 - Natural stone test methods - Determination of sensitivity to accidental staining
- SS-EN-16306 - Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles
- SS-EN-1857 - Chimneys - Components - Concrete flue liners
- SS-EN-1925 - Natural stone test methods - Determination of water absorption coefficient by capillarity
- SS-EN-1926 - Natural stone test methods - Determination of compressive strength
- SS-EN-1936 - Natural stone test methods - Determination of real density and apparent density, and of total and open porosity
- SS-EN-771-1 - Specification for masonry units - Part 1: Clay masonry units
- SS-EN-771-2 - Specification for masonry units - Part 2: Calcium silicate masonry units
- SS-EN-771-3 - Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
- SS-EN-771-4 - Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
- SS-EN-771-5 - Specification for masonry units - Part 5: Manufactured stone masonry units
- SS-EN-771-6 - Specification for masonry units - Part 6: Natural stone masonry units
- SS-EN-ISO-23875 - Mining - Air quality control systems for operator enclosures - Performance requirements and test methods (ISO 23875:2021)
- SS-EN-ISO-23875-AM1 - Mining — Air quality control systems for operator enclosures — Performance requirements and test methods — Amendment 1
- SS-ISO-10303-44 - Industrial automation systems and integration - Product data representation and exchange - Part 44: Integrated generic resource: Product structure configuration (ISO 10303-44:2018, IDT)
- SS-ISO-19426-1 - Structures for mine shafts - Part 1: Vocabulary (ISO 19426-1:2018, IDT)
- SS-ISO-19426-2 - Structures for mine shafts - Part 2: Headframe structures (ISO 19426-2:2018, IDT)
- SS-ISO-19426-3 - Structures for mine shafts - Part 3: Sinking stages (ISO 19426-3:2018, IDT)
- SS-ISO-19426-4 - Structures for mine shafts - Part 4: Conveyances (ISO 19426-4:2018, IDT)
- SS-ISO-19426-5 - Structures for mine shafts - Part 5: Shaft system structures (ISO 19426-5:2018, IDT)
- SS-ISO-19434 - Mining - Classification of mine accidents (ISO 19434:2017, IDT)
- SS-ISO-19434-AM1 - Mining - Classification of mine accidents - Amendment 1 (ISO 19434:2017/Amd 1:2019, IDT)
- SS-ISO-22932-1 - Mining - Vocabulary - Part 1: Planning and surveying (ISO 22932-1:2020, IDT)
- SS-ISO-22932-2 - Mining - Vocabulary - Part 2: Geology (ISO 22932-2:2020, IDT)
- SS-ISO-22932-3 - Mining Vocabulary Part 3: Rock mechanics (ISO 22932-3:2023, IDT)
- SS-ISO-22932-4 - Mining Vocabulary Part 4: Prospecting and exploration (ISO 22932-42023, IDT)
- SS-ISO-22932-5 - Mining Vocabulary Part 5: Drilling and blasting (ISO 22932-5:2023, IDT)
- SS-ISO-23872 - Mining structures Underground structures (ISO 23872:2021, IDT)
- SS-ISO-9897 - Freight containers - Container equipment data exchange (CEDEX) - General communication codes