Document Center List of Standards on Iron Ores
ICS Code 73.060.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-E1028 - Standard Test Method for Total Iron in Iron Ores and Related Materials by Dichromate Titrimetry (Withdrawn 2003)
- ASTM-E1070 - Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
- ASTM-E1081 - Standard Test Method for Determination of Total Iron in Iron Ores and Related Materials by Silver Reduction-Dichromate Titration (Withdrawn 2002)
- ASTM-E1357 - Standard Test Method for Determining the Rate of Bioleaching of Iron From Pyrite by Thiobacillus Ferrooxidans
- ASTM-E246 - Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry
- ASTM-E247 - Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
- ASTM-E278 - Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
- ASTM-E279 - Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets, Lump, and Sinter by the Tumbler Test
- ASTM-E314 - Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate Potentiometry and Periodate Spectrophotometry Techniques
- ASTM-E382 - Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
- ASTM-E395 - Standard Test Method for Determination of Total Sulfur in Iron Ores and Related Materials by Combustion-Iodate Titration (Withdrawn 2007)
- ASTM-E507 - Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
- ASTM-E508 - Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry
- ASTM-E738 - Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry (Withdrawn 2020)
- ASTM-E841 - Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption Spectrometry (Withdrawn 2021)
- ASTM-E877 - Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties
- ASTM-E878 - Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
BSI:
- BS-5660-1 - Methods of sampling iron ores
- BS-5660-2 - Methods of sampling iron ores
- BS-5661 - Method for preparation of samples of iron ores by manual means
- BS-5662-1 - Evaluation of sampling methods for iron ores
- BS-5663-2 - Methods of testing iron ores
- BS-6147 - Methods for determination of bulk density of iron ores
- BS-6212 - Method for determination of tumbler strength of iron ores
- BS-6598 - Method for determination of reducibility of iron ores
- BS-6599 - Method for determination of crushing strength of iron ore pellets
- BS-7020-1 - Analysis of iron ores
- BS-7020-11.2 - Analysis of iron ores. Methods for the determination of vanadium content
- BS-7020-12 - Analysis of iron ores
- BS-7020-14 - Analysis of iron ores
- BS-7020-15 - Analysis of iron ores
- BS-7020-16 - Analysis of iron ores
- BS-7020-18 - Analysis of iron ores
- BS-7020-20 - Analysis of iron ores
- BS-7020-8.1 - Analysis of iron ores. Methods for the determination of aluminium content
- BS-7020-8.2 - Analysis of iron ores. Methods for the determination of aluminium content
- BS-7020-9.1 - Analysis of iron ores. Methods for the determination of manganese content
- BS-ISO-10203 - Iron ores. Determination of calcium. Flame atomic absorption spectrometric method
- BS-ISO-10204 - Iron ores. Determination of magnesium. Flame atomic absorption spectrometric method
- BS-ISO-10204-TC - Tracked Changes. Iron ores. Determination of magnesium. Flame atomic absorption spectrometric method
- BS-ISO-10835 - Direct reduced iron and hot briquetted iron. Sampling and sample preparation
- BS-ISO-11256 - Iron ore pellets for shaft direct-reduction feedstocks. Determination of the clustering index
- BS-ISO-11257 - Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization
- BS-ISO-11257-TC - Tracked Changes. Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization
- BS-ISO-11258 - Iron ores for shaft direct-reduction feedstocks. Determination of the reducibility index, final degree of reduction and degree of metallization
- BS-ISO-11323 - Iron ore and direct reduced iron. Vocabulary
- BS-ISO-11533 - Iron ores. Determination of cobalt. Flame atomic absorption spectrometric method
- BS-ISO-11534 - Iron ores. Determination of tin. Flame atomic absorption spectrometric method
- BS-ISO-11535 - Iron ores. Determination of various elements. Inductively coupled plasma atomic emission spectrometric method
- BS-ISO-11536 - Iron ores. Determination of loss on ignition. Gravimetric method
- BS-ISO-13310 - Iron ores. Determination of zinc content. Flame atomic absorption spectrometric method
- BS-ISO-13311 - Iron ores. Determination of lead content. Flame atomic absorption spectrometric method
- BS-ISO-13312 - Iron ores. Determination of potassium. Flame atomic absorption spectrometric method
- BS-ISO-13313 - Iron ores. Determination of sodium. Flame atomic absorption spectrometric method
- BS-ISO-13930 - Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by dynamic method
- BS-ISO-15633 - Iron ores. Determination of nickel. Flame atomic absorption spectrometric method
- BS-ISO-15634 - Iron ores. Determination of chromium content. Flame atomic absorption spectrometric method
- BS-ISO-15967 - Direct reduced iron. Determination of the tumble and abrasion indices of hot briquetted iron (HBI)
- BS-ISO-15968 - Direct reduced iron. Determination of apparent density and water absorption of hot briquetted iron (HBI)
- BS-ISO-16042 - Iron ores. Guidelines for the use of certified reference materials (CRMs)
- BS-ISO-16742 - Iron ores. Sampling of slurries
- BS-ISO-16878 - Iron ores. Determination of metallic iron content. Iron(III) chloride titrimetric method
- BS-ISO-17992 - Iron ores. Determination of arsenic content. Hydride generation atomic absorption spectrometric method
- BS-ISO-21283 - Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
- BS-ISO-21826-1 - Iron ores. Determination of total iron content using the EDTA photometric titration method
- BS-ISO-21826-1-TC - Tracked Changes. Iron ores. Determination of total iron content using the EDTA photometric titration method
- BS-ISO-22682 - Iron ores. Determination of trace elements. Plasma spectrometric method
- BS-ISO-2596 - Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric, Karl Fischer and mass-loss methods
- BS-ISO-2597-1 - Iron ores. Determination of total iron content
- BS-ISO-2597-2 - Iron ores. Determination of total iron content
- BS-ISO-3082 - Iron ores. Sampling and sample preparation procedures
- BS-ISO-3085 - Iron ores. Experimental methods for checking the precision of sampling, sample preparation and measurement
- BS-ISO-3086 - Iron ores. Experimental methods for checking the bias of sampling
- BS-ISO-3087 - Iron ores. Determination of the moisture content of a lot
- BS-ISO-3271 - Iron ores for blast furnace and direct reduction feedstocks. Determination of the tumble and abrasion indices
- BS-ISO-3271-TC - Tracked Changes. Iron ores for blast furnace and direct reduction feedstocks. Determination of the tumble and abrasion indices
- BS-ISO-3852 - Iron ores for blast furnace and direct reduction feedstocks. Determination of bulk density
- BS-ISO-4688-1 - Iron ores. Determination of aluminium
- BS-ISO-4689-2 - Iron ores. Determination of sulfur content
- BS-ISO-4689-3 - Iron ores. Determination of sulfur content
- BS-ISO-4691 - Iron ores. Determination of titanium. Diantipyrylmethane spectrophotometric method
- BS-ISO-4695 - Iron ores for blast furnace feedstocks. Determination of the reducibility by the rate of reduction index
- BS-ISO-4695-TC - Tracked Changes. Iron ores for blast furnace feedstocks. Determination of the reducibility by the rate of reduction index
- BS-ISO-4696-1 - Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by static method
- BS-ISO-4696-2 - Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by static method
- BS-ISO-4698 - Iron ore pellets for blast furnace feedstocks. Determination of the free-swelling index
- BS-ISO-4700 - Iron ore pellets for blast furnace and direct reduction feedstocks. Determination of the crushing strength
- BS-ISO-4701 - Iron ores and direct reduced iron. Determination of size distribution by sieving
- BS-ISO-5416 - Direct reduced iron. Determination of metallic iron. Bromine-methanol titrimetric method
- BS-ISO-5418-1 - Iron ores. Determination of copper
- BS-ISO-5418-2 - Iron ores. Determination of copper
- BS-ISO-7215 - Iron ores for blast furnace feedstocks. Determination of the reducibility by the final degree of reduction index
- BS-ISO-7764 - Iron ores. Preparation of predried test samples for chemical analysis
- BS-ISO-7992 - Iron ores for blast furnace feedstocks. Determination of reduction under load
- BS-ISO-8371 - Iron ores for blast furnace feedstocks. Determination of the decrepitation index
- BS-ISO-8371-TC - Tracked Changes. Iron ores for blast furnace feedstocks. Determination of the decrepitation index
- BS-ISO-9517 - Iron ores. Determination of water-soluble chloride content. Ion-selective electrode method
- BS-ISO-9682-1 - Iron ores. Determination of manganese content
- BS-ISO-9682-2 - Iron ores. Determination of manganese content
- BS-ISO-9683-1 - Iron ores. Determination of vanadium
- BS-ISO-9683-2 - Iron ores. Determination of vanadium
- BS-ISO-9686 - Direct reduced iron. Determination of carbon and/or sulfur. High-frequency combustion method with infrared measurement
- DD-ISO-16878 - Direct reduced iron and hot briquetted iron. Determination of metallic iron. Iron(III) chloride titrimetric method
- PD-ISO-16043 - Iron ores. Determination of chlorine content. X-ray fluorescence spectrometric method
- PD-ISO-18230 - Iron ores. Determination of loss on ignition. Non-oxidised ores
- PD-ISO-18231 - Iron ores. Wavelength dispersive X-ray fluorescence spectrometers. Determination of precision
- PD-ISO-18336 - Guidelines for good XRF laboratory practice for the iron ore industry
- PD-ISO-21826 - Iron ores. Determination of total iron content. EDTA photometric titration method
- PD-ISO-2597-4 - Iron ores. Determination of total iron content
- PD-ISO-4688-1 - Iron ores. Determination of aluminium
- PD-ISO-4689-1 - Iron ores. Determination of sulfur content
- PD-ISO-4689-1-TC - Tracked Changes. Iron ores. Determination of sulfur content
- PD-ISO-9516-2 - Iron ores. Determination of various elements by X-ray fluorescence spectrometry
- PD-ISO-9516-4 - Iron ores. Determination of various elements by X-ray fluorescence spectrometry
- PD-ISO-9686 - Direct reduced iron. Determination of carbon and/or sulfur. High-frequency combustion method with infrared measurement
ISO:
- ISO-10203 - Iron ores - Determination of calcium - Flame atomic absorption spectrometric method
- ISO-10204 - Iron ores - Determination of magnesium - Flame atomic absorption spectrometric method
- ISO-10835 - Direct reduced iron and hot briquetted iron - Sampling and sample preparation
- ISO-10836 - Iron ores -- Method of sampling and sample preparation for physical testing
- ISO-11256 - Iron ore pellets for shaft direct-reduction feedstocks - Determination of the clustering index
- ISO-11257 - Iron ores for shaft direct-reduction feedstocks - Determination of the low-temperature reduction-disintegration index and degree of metallization
- ISO-11258 - Iron ores for shaft direct-reduction feedstocks - Determination of the reducibility index, final degree of reduction and degree of metallization
- ISO-11323 - Iron ore and direct reduced iron - Vocabulary
- ISO-11422 - Iron ores -- Recommended procedures for iron ore dissolution using either acid digestion or alkali fusion
- ISO-11459 - Iron ores -- Certified reference materials -- Preparation and certification for use in chemical analysis
- ISO-11533 - Iron ores - Determination of cobalt - Flame atomic absorption spectrometric method
- ISO-11534 - Iron ores - Determination of tin - Flame atomic absorption spectrometric method
- ISO-11535 - Iron ores - Determination of various elements - Inductively coupled plasma atomic emission spectrometric method
- ISO-11536 - Iron ores - Determination of loss on ignition - Gravimetric method
- ISO-11945 - Iron ores -- Currently traded international ores
- ISO-13310 - Iron ores -- Determination of zinc content -- Flame atomic absorption spectrometric method
- ISO-13311 - Iron ores -- Determination of lead content -- Flame atomic absorption spectrometric method
- ISO-13312 - Iron ores - Determination of potassium - Flame atomic absorption spectrometric method
- ISO-13313 - Iron ores - Determination of sodium - Flame atomic absorption spectrometric method
- ISO-13930 - Iron ores for blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by dynamic method
- ISO-15633 - Iron ores - Determination of nickel - Flame atomic absorption spectrometric method
- ISO-15634 - Iron ores - Determination of chromium content - Flame atomic absorption spectrometric method
- ISO-15967 - Direct reduced iron - Determination of the tumble and abrasion indices of hot briquetted iron (HBI)
- ISO-15968 - Direct reduced iron - Determination of apparent density and water absorption of hot briquetted iron (HBI)
- ISO-16042 - Iron ores - Guidelines for the use of certified reference materials (CRMs)
- ISO-16043 - Iron ores - Determination of chlorine content - X-ray fluorescence spectrometric method
- ISO-16742 - Iron ores - Sampling of slurries
- ISO-16878 - Iron ores - Determination of metallic iron content - Iron(III) chloride titrimetric method
- ISO-17992 - Iron ores - Determination of arsenic content - Hydride generation atomic absorption spectrometric method
- ISO-18230 - Iron ores - Determination of loss on ignition - Non-oxidised ores
- ISO-18231 - Iron ores - Wavelength dispersive X-ray fluorescence spectrometers - Determination of precision
- ISO-18336 - Guidelines for good XRF laboratory practice for the iron ore industry
- ISO-21283 - Iron ores - Determination of specific surface area - Test method using air-permeability apparatus (Blaine)
- ISO-21826 - Iron ores - Determination of total iron content - EDTA photometric titration method
- ISO-21826-1 - Iron ores - Determination of total iron content using the EDTA photometric titration method - Part 1: Microwave digestion method
- ISO-22682 - Iron ores - Determination of trace elements - Plasma spectrometric method
- ISO-2596 - Iron ores - Determination of hygroscopic moisture in analytical samples - Gravimetric, Karl Fischer and mass-loss methods
- ISO-2597-1 - Iron ores - Determination of total iron content - Part 1: Titrimetric method after tin(II) chloride reduction
- ISO-2597-2 - Iron ores - Determination of total iron content - Part 2: Titrimetric methods after titanium(III) chloride reduction
- ISO-2597-4 - Iron ores - Determination of total iron content - Part 4: Potentiometric titration method
- ISO-2598-1 - Iron ores -- Determination of silicon content -- Part 1: Gravimetric methods
- ISO-2598-2 - Iron ores -- Determination of silicon content -- Part 2: Reduced molybdosilicate spectrophotometric method
- ISO-2599 - Iron ores - Determination of phosphorus content - Titrimetric method
- ISO-3082 - Iron ores - Sampling and sample preparation procedures
- ISO-3084 - Iron ores -- Experimental methods for evaluation of quality variation
- ISO-3085 - Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement
- ISO-3086 - Iron ores - Experimental methods for checking the bias of sampling
- ISO-3087 - Iron ores - Determination of the moisture content of a lot
- ISO-3271 - Iron ores for blast furnace and direct reduction feedstocks - Determination of the tumble and abrasion indices
- ISO-3852 - Iron ores for blast furnace and direct reduction feedstocks - Determination of bulk density
- ISO-3886 - Iron ores -- Determination of manganese content -- Periodate spectrophotometric method
- ISO-4687-1 - Iron ores -- Determination of phosphorus content -- Part 1: Molybdenum blue spectrophotometric method
- ISO-4688-1 - Iron ores - Determination of aluminium - Part 1: Flame atomic absorption spectrometric method
- ISO-4689 - Iron ores -- Determination of sulfur content -- Barium sulfate gravimetric method
- ISO-4689-1 - Iron ores - Determination of sulfur content - Part 1: Barium sulfate gravimetric method
- ISO-4689-2 - Iron ores - Determination of sulfur content - Part 2: Combustion/titration method
- ISO-4689-3 - Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
- ISO-4691 - Iron ores - Determination of titanium - Diantipyrylmethane spectrophotometric method
- ISO-4693 - Iron ores -- Determination of copper content -- Flame atomic absorption spectrometric method
- ISO-4694 - Iron ores -- Determination of fluorine content -- Ion-selective electrode method
- ISO-4695 - Iron ores for blast furnace feedstocks - Determination of the reducibility by the rate of reduction index
- ISO-4696-1 - Iron ores for blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by static method - Part 1: Reduction with CO, CO2, H2 and N2
- ISO-4696-2 - Iron ores for blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by static method - Part 2: Reduction with CO and N2
- ISO-4698 - Iron ore pellets for blast furnace feedstocks - Determination of the free-swelling index
- ISO-4700 - Iron ore pellets for blast furnace and direct reduction feedstocks - Determination of the crushing strength
- ISO-4701 - Iron ores and direct reduced iron - Determination of size distribution by sieving
- ISO-5416 - Direct reduced iron - Determination of metallic iron - Bromine-methanol titrimetric method
- ISO-5418-1 - Iron ores - Determination of copper - Part 1: 2,2-Biquinolyl spectrophotometric method
- ISO-5418-2 - Iron ores - Determination of copper - Part 2: Flame atomic absorption spectrometric method
- ISO-6830 - Iron ores -- Determination of aluminium content -- EDTA titrimetric method
- ISO-7215 - Iron ores for blast furnace feedstocks - Determination of the reducibility by the final degree of reduction index
- ISO-7335 - Iron ores -- Determination of combined water content -- Karl Fischer titrimetric method
- ISO-7764 - Iron ores - Preparation of predried test samples for chemical analysis
- ISO-7834 - Iron ores -- Determination of arsenic content -- Molybdenum blue spectrophotometric method
- ISO-7992 - Iron ores for blast furnace feedstocks - Determination of reduction under load
- ISO-8263 - Iron ore fines -- Method for presentation of the results of sintering tests
- ISO-8371 - Iron ores for blast furnace feedstocks - Determination of the decrepitation index
- ISO-9035 - Iron ores -- Determination of acid-soluble iron(II) content -- Titrimetric method
- ISO-9507 - Iron ores -- Determination of total iron content -- Titanium(III) chloride reduction methods
- ISO-9516 - Iron ores -- Determination of silicon, calcium, manganese, aluminium, titanium, magnesium, phosphorus, sulfur and potassium -- Wavelength dispersive X-ray fluorescence spectrometric method
- ISO-9516-1 - Iron ores - Determination of various elements by X-ray fluorescence spectrometry - Part 1: Comprehensive procedure
- ISO-9516-2 - Iron ores - Determination of various elements by X-ray fluorescence spectrometry - Part 2: Single element calibration procedure
- ISO-9516-4 - Iron ores - Determination of various elements by X-ray fluorescence spectrometry - Part 4: Performance-based method using fusion preparation method
- ISO-9517 - Iron ores - Determination of water-soluble chloride - Ion-selective electrode method
- ISO-9682-1 - Iron ores - Determination of manganese content - Part 1: Flame atomic absorption spectrometric method
- ISO-9682-2 - Iron ores - Determination of manganese content - Part 2: Periodate spectrophotometric method
- ISO-9683 - Iron ores -- Determination of vanadium content -- BPHA spectrophotometric method
- ISO-9683-1 - Iron ores - Determination of vanadium - Part 1: BPHA spectrophotometric method
- ISO-9683-2 - Iron ores - Determination of vanadium - Part 2: Flame atomic absorption spectrometric methods
- ISO-9684 - Iron ores -- Determination of vanadium content -- Flame atomic absorption spectrometric methods
- ISO-9685 - Iron ores -- Determination of nickel and/or chromium contents -- Flame atomic absorption spectrometric method
- ISO-9686 - Direct reduced iron - Determination of carbon and/or sulfur - High-frequency combustion method with infrared measurement
Other SDOs:
- JIS-M-8219-1-AM1 - Iron ores -- Determination of titanium -- Part 1: Flame atomic absorption spectrometric method (Amendment 1)
- SS-EN-15695-2 - Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures
- SS-ISO-10203 - Iron ores - Determination of calcium - Flame atomic absorption spectrometric method (ISO 10203:2017, IDT)
- SS-ISO-10204 - Iron ores - Determination of magnesium - Flame atomic absorption spectrometric method (ISO 10204:2017, IDT)
- SS-ISO-10835 - Direct reduced iron and hot briquetted iron - Sampling and sample preparation (ISO 10835:2007, IDT)
- SS-ISO-11256 - Iron ore pellets for shaft direct-reduction feedstocks - Determination of the clustering index (ISO 11256:2015, IDT)
- SS-ISO-11257 - Iron ores for shaft direct-reduction feedstocks - Determination of the low-temperature reduction-disintegration index and degree of metallization (ISO 11257:2015, IDT)
- SS-ISO-11258 - Iron ores for shaft direct-reduction feedstocks - Determination of the reducibility index, final degree of reduction and degree of metallization (ISO 11258:2015, IDT)
- SS-ISO-11323 - Iron ore and direct-reduced iron - Vocabulary (ISO 11323:2010, IDT)
- SS-ISO-11459 - Iron ores - Certified reference materials - Preparation and certification for use in chemical analysis (ISO 11459:1997, IDT)
- SS-ISO-11533 - Iron ores - Determination of cobalt - Flame atomic absorption spectrometric method (ISO 11533:2009, IDT)
- SS-ISO-11534 - Iron ores - Determination of tin - Flame atomic absorption spectrometric method (ISO 11534:2006, IDT)
- SS-ISO-11535 - Iron ores - Determination of various elements - Inductively coupled plasma atomic emission spectrometric method (ISO 11535:2006, IDT)
- SS-ISO-11536 - Iron ores - Determination of loss on ignition - Gravimetric method (ISO 11536:2015, IDT)
- SS-ISO-13310 - Iron ores - Determination of zinc content - Flame atomic absorption spectrometric method (ISO 13310:1997, IDT)
- SS-ISO-13311 - Iron ores - Determination of lead content - Flame atomic absorption spectrometric method (ISO 13311:1997, IDT)
- SS-ISO-13312 - Iron ores - Determination of potassium - Flame atomic absorption spectrometric method (ISO 13312:2017, IDT)
- SS-ISO-13313 - Iron ores - Determination of sodium - Flame atomic absorption spectrometric method (ISO 13313:2017, IDT)
- SS-ISO-13930 - Iron ores for blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by dynamic method (ISO 13930:2015, IDT)
- SS-ISO-15633 - Iron ores - Determination of nickel - Flame atomic absorption spectrometric method (ISO 15633:2017, IDT)
- SS-ISO-15634 - Iron ores - Determination of chromium content - Flame atomic absorption spectrometric method (ISO 15634:2015, IDT)
- SS-ISO-15967 - Direct reduced iron - Determination of the tumble and abrasion indices of hot briquetted iron (HBI) (ISO 15967:2007, IDT)
- SS-ISO-15968 - Direct reduced iron - Determination of apparent density and water absorption of hot briquetted iron (HBI) (ISO 15968:2016, IDT)
- SS-ISO-16042 - Iron ores - Guidelines for the use of certified reference materials (CRMs) (ISO 16042:2007, IDT)
- SS-ISO-16742 - Iron ores - Sampling of slurries (ISO 16742:2014, IDT)
- SS-ISO-16878 - Iron ores - Determination of metallic iron content - Iron(III) chloride titrimetric method (ISO 16878:2016, IDT)
- SS-ISO-17992 - Iron ores - Determination of arsenic content - Hydride generation atomic absorption spectrometric method (ISO 17992:2013, IDT)
- SS-ISO-21283 - Iron ores - Determination of specific surface area - Test method using air-permeability apparatus (Blaine) (ISO 21283:2018, IDT)
- SS-ISO-22682 - Iron ores - Determination of trace elements - Plasma spectrometric method (ISO 22682:2017, IDT)
- SS-ISO-2596 - Iron ores - Determination of hygroscopic moisture in analytical samples - Gravimetric, Karl Fischer and mass-loss methods (ISO 2596:2006, IDT)
- SS-ISO-2597-1 - Iron ores - Determination of total iron content - Part 1: Titrimetric method after tin(II) chloride reduction (ISO 2597-1:2006, IDT)
- SS-ISO-2597-2 - Iron ores - Determination of total iron content - Part 2: Titrimetric methods after titanium(III) chloride reduction (ISO 2597-2:2019, IDT)
- SS-ISO-2598-1 - Iron ores - Determination of silicon content - Part 1: Gravimetric methods (ISO 2598-1:1992, IDT)
- SS-ISO-2598-2 - Iron ores - Determination of silicon content - Part 2: Reduced molybdosilicate spectrophotometric method (ISO 2598-2:1992, IDT)
- SS-ISO-2599 - Iron ores - Determination of phosphorus content - Titrimetric method (ISO 2599:2003, IDT)
- SS-ISO-3082 - Iron ores - Sampling and sample preparation procedures (ISO 3082:2017, IDT)
- SS-ISO-3084 - Iron ores - Experimental methods for evaluation of quality variation (ISO 3084:1998, IDT)
- SS-ISO-3085 - Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement (ISO 3085:2019, IDT)
- SS-ISO-3086 - Iron ores - Experimental methods for checking the bias of sampling (ISO 3086:2006, IDT)
- SS-ISO-3087 - Iron ores - Determination of the moisture content of a lot (ISO 3087:2011, IDT)
- SS-ISO-3271 - Iron ores for blast furnace and direct reduction feedstocks - Determination of the tumble and abrasion indices (ISO 3271:2015, IDT)
- SS-ISO-3852 - Iron ores for blast furnace and direct reduction feedstocks - Determination of bulk density (ISO 3852:2007, IDT)
- SS-ISO-4687-1 - Iron ores - Determination of phosphorus content - Part 1: Molybdenum blue spectrophotometric method (ISO 4687-1:1992, IDT)
- SS-ISO-4688-1 - Iron ores - Determination of aluminium - Part 1: Flame atomic absorption spectrometric method (ISO 4688-1:2006, IDT)
- SS-ISO-4689 - Iron ores - Determination of sulfur content - Barium sulfate gravimetric method (ISO 4689:1986, IDT)
- SS-ISO-4689-2 - Iron ores - Determination of sulfur content - Part 2: Combustion/titration method (ISO 4689-2:2017, IDT)
- SS-ISO-4691 - Iron ores - Determination of titanium - Diantipyrylmethane spectrophotometric method (ISO 4691:2009, IDT)
- SS-ISO-4694 - Iron ores - Determination of fluorine content - Ion-selective electrode method (ISO 4694:1987, IDT)
- SS-ISO-4695 - Iron ores for blast furnace feedstocks - Determination of the reducibility by the rate of reduction index (ISO 4695:2015, IDT)
- SS-ISO-4696-1 - Iron ores for blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by static method - Part 1: Reduction with CO, CO2, H2 and N2 (ISO 4696-1:2015, IDT)
- SS-ISO-4696-2 - Iron ores for blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by static method - Part 2: Reduction with CO and N2 (ISO 4696-2:2015, IDT)
- SS-ISO-4698 - Iron ore pellets for blast furnace feedstocks - Determination of the free-swelling index (ISO 4698:2007, IDT)
- SS-ISO-4700 - Iron ore pellets for blast furnace and direct reduction feedstocks - Determination of the crushing strength (ISO 4700:2015, IDT)
- SS-ISO-4701 - Iron ores and direct reduced iron - Determination of size distribution by sieving (ISO 4701:2008, IDT)
- SS-ISO-5416 - Direct reduced iron - Determination of metallic iron - Bromine-methanol titrimetric method (ISO 5416:2006, IDT)
- SS-ISO-5418-1 - Iron ores - Determination of copper - Part 1: 2,2' - Biquinolyl spectrophotometric method (ISO 5418-1:2006, IDT)
- SS-ISO-5418-2 - Iron ores - Determination of copper - Part 2: Flame atomic absorption spectrometric method (ISO 5418-2:2006, IDT)
- SS-ISO-6830 - Iron ores - Determination of aluminium content - EDTA titrimetric method (ISO 6830:1986, IDT)
- SS-ISO-7215 - Iron ores for blast furnace feedstocks - Determination of the reducibility by the final degree of reduction index (ISO 7215:2015, IDT)
- SS-ISO-7335 - Iron ores - Determination of combined water content - Karl Fischer titrimetric method (ISO 7335:1987, IDT)
- SS-ISO-7764 - Iron ores - Preparation of predried test samples for chemical analysis (ISO 7764:2006, IDT)
- SS-ISO-7834 - Iron ores - Determination of arsenic content - Molybdenum blue spectrophotometric method (ISO 7834:1987, IDT)
- SS-ISO-7992 - Iron ores for blast furnace feedstocks - Determination of reduction under load (ISO 7992:2015, IDT)
- SS-ISO-8263 - Iron ore fines - Method for presentation of the results of sintering tests (ISO 8263:1992, IDT)
- SS-ISO-8371 - Iron ores for blast furnace feedstocks - Determination of the decrepitation index (ISO 8371:2015, IDT)
- SS-ISO-9035 - Iron ores - Determination of acid-soluble iron(II)content - Titrimetric method (ISO 9035, IDT)
- SS-ISO-9507 - Iron ores - Determination of total iron content - Titanium(III) chloride reduction methods (ISO 9507:1990, IDT)
- SS-ISO-9516-1 - Iron ores - Determination of various elements by X-ray fluorescence spectrometry - Part 1: Comprehensive procedure (ISO 9516-1:2003, IDT)
- SS-ISO-9517 - Iron ores - Determination of water-soluble chloride - Ion-selective electrode method (ISO 9517:2007, IDT)
- SS-ISO-9682-1 - Iron ores - Determination of manganese content - Part 1: Flame atomic absorption spectrometric method (ISO 9682-1:2009, IDT)
- SS-ISO-9682-2 - Iron ores - Determination of manganese content - Part 2: Periodate spectrophotometric method (ISO 9682-2:2006, IDT)
- SS-ISO-9683-1 - Iron ores - Determination of vanadium - Part 1: BPHA spectrophotometric method (ISO 9683-1:2006, IDT)
- SS-ISO-9683-2 - Iron ores - Determination of vanadium - Part 2: Flame atomic absorption spectrometric methods (ISO 9683-2:2009, IDT)
- SS-ISO-9684 - Iron ores - Determination of vanadium content - Flame atomic absorption spectrometric method (ISO 9684:1991, IDT)
- SS-ISO-9686 - Direct reduced iron - Determination of carbon and/or sulfur - High-frequency combustion method with infrared measurement (ISO 9686:2006, IDT)