Document Center List of Standards on Crude Petroleum
ICS Code 75.040
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D1018 - Standard Test Method for Hydrogen In Petroleum Fractions (Withdrawn 2021)
- ASTM-D1298 - Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
- ASTM-D1401 - Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
- ASTM-D2502 - Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
- ASTM-D2892 - Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
- ASTM-D3230 - Standard Test Method for Salts in Crude Oil (Electrometric Method)
- ASTM-D3827 - Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
- ASTM-D4006 - Standard Test Method for Water in Crude Oil by Distillation
- ASTM-D4007 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
- ASTM-D4310 - Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
- ASTM-D4377 - Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (Withdrawn 2020)
- ASTM-D4489 - Standard Practices for Sampling of Waterborne Oils
- ASTM-D473 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
- ASTM-D4807 - Standard Test Method for Sediment in Crude Oil by Membrane Filtration
- ASTM-D4928 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
- ASTM-D4929 - Standard Test Method for Determination of Organic Chloride Content in Crude Oil
- ASTM-D5002 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
- ASTM-D5037 - Standard Test Method for Comparison of Waterborne Petroleum Oils by High Performance Liquid Chromatography (Withdrawn 2002)
- ASTM-D5661 - Standard Test Method for Relative Solvency of Petroleum Oils by the PKP Method (Withdrawn 2010)
- ASTM-D5708 - Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
- ASTM-D5853 - Standard Test Method for Pour Point of Crude Oils
- ASTM-D5863 - Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
- ASTM-D6377 - Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR
x (Expansion Method) - ASTM-D6470 - Standard Test Method for Salt in Crude Oils (Potentiometric Method)
- ASTM-D6560 - Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
- ASTM-D6822 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
- ASTM-D7059 - Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
- ASTM-D7157 - Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (
n -Heptane Phase Separation; Optical Detection) - ASTM-D7622 - Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
- ASTM-D7623 - Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
- ASTM-D7691 - Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM-D7740 - Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
- ASTM-D7829 - Standard Guide for Sediment and Water Determination in Crude Oil
- ASTM-D7900 - Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
- ASTM-D8003 - Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography
- ASTM-D8045 - Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration
- ASTM-D8056 - Standard Guide for Elemental Analysis of Crude Oil
- ASTM-D8150 - Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
- ASTM-D96 - Standard Test Methods for Water and Sediment in Crude Oil by Centrifuge Method (Field Procedure) (Withdrawn 2000)
- ASTM-G205 - Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
BSI:
- BS-2000-356 - Methods of test for petroleum and its products. Crude petroleum. Determination of water. Potentiometric Karl Fischer titration method
- BS-2000-386 - Methods of test for petroleum and its products. Crude petroleum. Determination of water. Coulometric Karl Fischer titration method
- BS-EN-ISO-9029 - Methods of test for petroleum and its products. Crude petroleum. Determination of water. Distillation method
ISO:
- ISO-10336 - Crude petroleum -- Determination of water -- Potentiometric Karl Fischer titration method
- ISO-10337 - Crude petroleum -- Determination of water -- Coulometric Karl Fischer titration method
- ISO-3735 - Crude petroleum and fuel oils -- Determination of sediment -- Extraction method
- ISO-9029 - Crude petroleum -- Determination of water -- Distillation method
- ISO-9030 - Crude petroleum -- Determination of water and sediment -- Centrifuge method
- ISO-9114 - Crude petroleum -- Determination of water content by hydride reaction -- Field method
Other SDOs:
- DIN-EN-ISO-3838 - Crude Petroleum & Liquid or Solid Petroleum Products, Determination of Density or Rela
- EN-ISO-3838 - Crude Petroleum & Liquid or Solid Petroleum Products, Determination of Density or Rela
- EN-ISO-9029 - Crude Petroleum, Determination of Water, Distillation Method
- JIS-K-2270-1 - Crude petroleum and petroleum products -- Determination of carbon residue -- Part 1: Conradson method
- SS-EN-ISO-3735 - Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999)
- SS-EN-ISO-3838 - Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
- SS-EN-ISO-9029 - Crude petroleum - Determination of water - Distillation method (ISO 9029:1990)
- SS-ENV-1014-3 - Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzo(a)pyrene content of creosote
- SS-ISO-10337 - Crude petroleum - Determination of water - Coulometric Karl Fischer titration method
- SS-ISO-3838 - Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary stoppered pyknometer and graduated bicapillary pyknometer methods
- SS-ISO-9029 - Crude petroleum - Determination of water - Distillation method