Document Center List of Standards on Petroleum Products In General
ICS Code 75.080
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D1085 - Practice for Gauging Petroleum and Petroleum Products (Available as Separate Reprint Only) (Withdrawn 1995)
- ASTM-D1086 - Method for Measuring the Temperature of Petroleum and Petroleum Products (Available as Separate Reprint Only) (Withdrawn 1995)
- ASTM-D1093 - Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
- ASTM-D1159 - Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
- ASTM-D1160 - Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
- ASTM-D1217 - Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
- ASTM-D1218 - Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
- ASTM-D1250 - Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1
- ASTM-D1266 - Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
- ASTM-D129 - Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) (Withdrawn 2023)
- ASTM-D1298 - Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
- ASTM-D1319 - Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
- ASTM-D1500 - Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
- ASTM-D1552 - Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
- ASTM-D1553 - Method for Analysis of Graphites Used as Lubricants (Withdrawn 1990)
- ASTM-D156 - Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
- ASTM-D1657 - Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
- ASTM-D1744 - Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016)
- ASTM-D1747 - Standard Test Method for Refractive Index of Viscous Materials
- ASTM-D1859 - Standard Specification for Petroleum Used for Blending with Creosote (Withdrawn 2006)
- ASTM-D189 - Standard Test Method for Conradson Carbon Residue of Petroleum Products
- ASTM-D2008 - Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM-D2226 - Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use
- ASTM-D2269 - Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM-D242 - Standard Specification for Mineral Filler for Asphalt Mixtures
- ASTM-D2421 - Standard Practice for Interconversion of Analysis of C
5 - ASTM-D2424 - Method of Test for Hydrocarbon Types in Propylene Polymer by Mass Spectrometry (Withdrawn 1984)
- ASTM-D2425 - Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
- ASTM-D2500 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
- ASTM-D2501 - Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
- ASTM-D2502 - Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
- ASTM-D2503 - Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure (Withdrawn 2022)
- ASTM-D2504 - Standard Test Method for Noncondensable Gases in C
2 and Lighter Hydrocarbon Products by Gas Chromatography (Withdrawn 2024) - ASTM-D2549 - Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
- ASTM-D2551 - Method of Test for Vapor Pressure of Petroleum Products (Micromethod) (Withdrawn 1987)
- ASTM-D2597 - Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography (Withdrawn 2016)
- ASTM-D2622 - Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
- ASTM-D270 - Methods of Sampling Petroleum and Petroleum Products (Withdrawn 1982)
- ASTM-D2782 - Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
- ASTM-D2786 - Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry (Withdrawn 2023)
- ASTM-D287 - Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
- ASTM-D2887 - Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
- ASTM-D2889 - Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
- ASTM-D2890 - Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
- ASTM-D2896 - Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
- ASTM-D3120 - Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
- ASTM-D323 - Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
- ASTM-D3235 - Standard Test Method for Solvent Extractables in Petroleum Waxes
- ASTM-D3238 - Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
- ASTM-D3239 - Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry (Withdrawn 2023)
- ASTM-D3325 - Standard Practice for Preservation of Waterborne Oil Samples
- ASTM-D3326 - Standard Practice for Preparation of Samples for Identification of Waterborne Oils
- ASTM-D3328 - Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
- ASTM-D3339 - Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
- ASTM-D341 - Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products
- ASTM-D3414 - Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy (Withdrawn 2018)
- ASTM-D3415 - Standard Practice for Identificaiton of Waterborne Oils
- ASTM-D3427 - Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
- ASTM-D3439 - Test Methods for Assay of Alkaline Cresylate Solutions from Petroleum Sources (Withdrawn 1995)
- ASTM-D3650 - Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis (Withdrawn 2018)
- ASTM-D3712 - Standard Test Method of Analysis of Oil-Soluble Sulfonates by Liquid Chromatography
- ASTM-D3946 - Standard Test Method for Evaluating the Bacteria Resistance of Water-Dilutable Metalworking Fluids (Withdrawn 2004)
- ASTM-D4045 - Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
- ASTM-D4057 - Standard Practice for Manual Sampling of Petroleum and Petroleum Products
- ASTM-D4175 - Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
- ASTM-D4177 - Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
- ASTM-D4294 - Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
- ASTM-D445 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
- ASTM-D4530 - Standard Test Method for Determination of Carbon Residue (Micro Method)
- ASTM-D4625 - Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
- ASTM-D4627 - Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids
- ASTM-D4629 - Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
- ASTM-D4657 - Standard Test Method for Polynuclear Aromatic Hydrocarbons in Water (Withdrawn 2005)
- ASTM-D482 - Standard Test Method for Ash from Petroleum Products
- ASTM-D483 - Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils (Withdrawn 2024)
- ASTM-D4952 - Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
- ASTM-D5190 - Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method) (Withdrawn 2012)
- ASTM-D5191 - Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
- ASTM-D524 - Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
- ASTM-D5291 - Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- ASTM-D5292 - Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy (Withdrawn 2018)
- ASTM-D5304 - Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
- ASTM-D5307 - Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography (Withdrawn 2011)
- ASTM-D5346 - Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
- ASTM-D5347 - Standard Test Method for Determination of the Ash Content of Fats and Oils
- ASTM-D5348 - Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene
- ASTM-D5349 - Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method
- ASTM-D5354 - Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
- ASTM-D5355 - Standard Test Method for Specific Gravity of Oils and Liquid Fats
- ASTM-D5384 - Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
- ASTM-D5443 - Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography
- ASTM-D5482 - Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)
- ASTM-D5505 - Standard Practice for Classifying Emulsified Recycling Agents
- ASTM-D5551 - Standard Test Method for Determination of the Cloud Point of Oil
- ASTM-D5553 - Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
- ASTM-D5554 - Standard Test Method for Determination of the Iodine Value of Fats and Oils
- ASTM-D56 - Standard Test Method for Flash Point by Tag Closed Cup Tester
- ASTM-D565 - Standard Test Method for Carbonizable Substances in White Mineral Oil
- ASTM-D5759 - Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
- ASTM-D5762 - Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
- ASTM-D5772 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
- ASTM-D5846 - Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
- ASTM-D5854 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
- ASTM-D5949 - Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
- ASTM-D5950 - Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
- ASTM-D5985 - Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
- ASTM-D6045 - Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
- ASTM-D6187 - Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence (Withdrawn 2019)
- ASTM-D6200 - Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
- ASTM-D6300 - Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
- ASTM-D6304 - Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
- ASTM-D6352 - Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
- ASTM-D6367 - Standard Specification for AMS (α-Methylstyrene)
- ASTM-D6378 - Standard Test Method for Determination of Vapor Pressure (VP
X ) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method) - ASTM-D6450 - Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
- ASTM-D6560 - Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
- ASTM-D664 - Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM-D665 - Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
- ASTM-D6708 - Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
- ASTM-D6749 - Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
- ASTM-D6791 - Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
- ASTM-D6792 - Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM-D6809 - Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
- ASTM-D6822 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
- ASTM-D6892 - Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
- ASTM-D6895 - Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100 °C
- ASTM-D7094 - Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
- ASTM-D7152 - Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
- ASTM-D7171 - Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
- ASTM-D7213 - Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
- ASTM-D7260 - Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
- ASTM-D7346 - Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
- ASTM-D7397 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)
- ASTM-D7453 - Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
- ASTM-D7578 - Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
- ASTM-D7662 - Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
- ASTM-D7679 - Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
- ASTM-D7683 - Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)
- ASTM-D7776 - Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories (Withdrawn 2017)
- ASTM-D7777 - Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
- ASTM-D7778 - Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
- ASTM-D7798 - Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC)
- ASTM-D7807 - Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
- ASTM-D7873 - Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)
- ASTM-D7876 - Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
- ASTM-D7900 - Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
- ASTM-D7975 - Standard Test Method for Determination of Vapor Pressure of Crude Oil:
VPCR x -F(Tm°C) (Manual Expansion Field Method) - ASTM-D7996 - Standard Test Method for Measuring Visible Spectrum of Asphaltenes in Heavy Fuel Oils and Crude Oils by Spectroscopy in a Microfluidic Platform (Withdrawn 2024)
- ASTM-D8009 - Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products
- ASTM-D8045 - Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration
- ASTM-D808 - Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) (Withdrawn 2021)
- ASTM-D8092 - Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer
- ASTM-D8126 - Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration
- ASTM-D8146 - Standard Guide for Evaluating Test Method Capability and Fitness for Use
- ASTM-D8149 - Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
- ASTM-D8236 - Standard Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Analysis
- ASTM-D86 - Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
- ASTM-D891 - Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
- ASTM-D92 - Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
- ASTM-D93 - Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM-D94 - Standard Test Methods for Saponification Number of Petroleum Products
- ASTM-D943 - Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
- ASTM-D97 - Standard Test Method for Pour Point of Petroleum Products
- ASTM-D974 - Standard Test Method for Acid and Base Number by Color-Indicator Titration
- ASTM-E1599 - Standard Guide for Corrective Action for Petroleum Releases (Withdrawn 2002)
- ASTM-E3146 - Standard Test Method for Determination of Carbonyls in Pyrolysis Bio-Oils by Potentiometric Titration
- ASTM-E482 - Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance
- ASTM-F1214 - Test Method for Water Solubility in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 1998)
- ASTM-F1693 - Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land
- ASTM-F3045 - Standard Test Method for Evaluation of the Type and Viscoelastic Stability of Water-in-oil Mixtures Formed from Crude Oil and Petroleum Products Mixed with Water
- ASTM-F3337 - Standard Guide for Taking Property and Behavior Measurements on Weathered Fractions of Oil
BSI:
- BS-2000-0 - Methods of test for petroleum and its products. General introduction
- BS-2000-0-1 - Methods of test for petroleum and its products. General introduction
- BS-2000-0-2 - Methods of test for petroleum and its products. General introduction
- BS-2000-0.3 - Methods of test for petroleum and its products. General introduction. Significance and usage of IP precision data
- BS-2000-0-4 - Methods of test for petroleum and its products. General introduction
- BS-2000-0.4 - Methods of test for petroleum and its products. General introduction
- BS-2000-0 ADD1 - Methods of test for petroleum and its products. Standard reagents and thermometers
- BS-2000-1 - Methods of test for petroleum and its products
- BS-2000-12 - Methods of test for petroleum and its products
- BS-2000-129 - Methods of test for petroleum and its products
- BS-2000-13 - Methods of test for petroleum and its products. Petroleum products. Determination of carbon residue. Conradson method
- BS-2000-130 - Methods of test for petroleum and its products
- BS-2000-136 - Methods of test for petroleum and its products. Determination of saponification number. Titration method
- BS-2000-136-1 - Methods of test for petroleum and its products. Determination of saponification number. Colour-indicator titration method
- BS-2000-136.1 - Methods of test for petroleum and its products. Determination of saponification number. Colour-indicator titration method
- BS-2000-136-2 - Methods of test for petroleum and its products. Determination of saponification number. Potentiometric titration method
- BS-2000-136.2 - Methods of test for petroleum and its products. Determination of saponification number. Potentiometric titration method
- BS-2000-139 - Methods of test for petroleum and its products. Petroleum products and lubricants. Determination of acid or base number. Colour-indicator titration method
- BS-2000-14 - Methods of test for petroleum and its products
- BS-2000-143 - Methods of test for petroleum and its products
- BS-2000-15 - Methods of test for petroleum and its products. Petroleum products. Determination of pour point
- BS-2000-156 - Methods of test for petroleum and its products. Determination of hydrocarbon types in petroleum products. Fluorescent indicator adsorption method
- BS-2000-170 - Methods of test for petroleum and its products. Petroleum products. Determination of flash point. Abel closed cup method
- BS-2000-182 - Methods of test for petroleum and its products
- BS-2000-195 - Methods of test for petroleum and its products
- BS-2000-196 - Methods of test for petroleum and its products. Petroleum products. Determination of colour (ASTM scale)
- BS-2000-2 - Methods of test for petroleum and its products
- BS-2000-219 - Methods of test for petroleum and its products. Petroleum products. Determination of cloud point
- BS-2000-223 - Methods of test for petroleum and its products
- BS-2000-288 - Methods of test for petroleum and its products. Determination of nickel, sodium and vanadium. Atomic absorption spectroscopy method
- BS-2000-35 - Methods of test for petroleum and its products
- BS-2000-394 - Methods of test for petroleum and its products
- BS-2000-398 - Methods of test for petroleum and its products. Petroleum products. Determination of carbon residue. Micro method
- BS-2000-412 - Methods of test for petroleum and its products
- BS-2000-431 - Methods of test for petroleum and its products. Petroleum products. Determination of acid number. Semi-micro colour-indicator titration method
- BS-2000-450 - Methods of test for petroleum and its products
- BS-2000-454 - Methods of test for petroleum and its products
- BS-2000-455 - Methods of test for petroleum and its products
- BS-2000-57 - Methods of test for petroleum and its products
- BS-2000-61 - Methods of test for petroleum and its products
- BS-2000-71 - Methods of test for petroleum and its products. Kinematic viscosity of transparent and opaque liquids and calculation of dynamic viscosity
- BS-2000-71-2 - Methods of test for petroleum and its products. Kinematic viscosity. Specifications and operating instructions for glass capillary kinematic viscometers
- BS-2000-71.2 - Methods of test for petroleum and its products. Kinematic viscosity. Specifications and operating instructions for glass capillary kinematic viscometers
- BS-2000-71-71-1 - Methods of test for petroleum and its products. Kinematic viscosity. Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
- BS-2000-74 - Methods of test for petroleum and its products
- BS-3195-2 - Methods for Sampling Petroleum Products, Automatic Pipelinesampling of Liquid Hydroca
- BS-3836-1 - Specification for components of microscopes.
- BS-4451 - Method for determination of carbon residue of petroleum products (Ramsbottom method)
- BS-5089 - Method for determination of bromine number of petroleum distillates and commercial aliphatic olefins by the electrometric method
- BS-5379 - Determination of the sulphur content of petroleum products by the Wickbold combustion method
- BS-6664-4 - Flashpoint of petroleum and related products. Method for determination of flashpoint (rapid equilibrium method)
- BS-7011-1-1.1 - Consumable accessories for light microscopes. Immersion oils. Specification for immersion oils for general use
- BS-7391 - Method for determination of aniline point and mixed aniline point of petroleum products and hydrocarbon solvents
- BS-7576 - Method for Continuous Sampling of Liquefied Natural Gas (Lng) in Transfer Pipelines
- BS-EN-12766-1 - Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products
- BS-EN-12766-2 - Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products
- BS-EN-12766-3 - Petroleum products and used oils. Determination of PCBs and related products
- BS-EN-12916 - Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection
- BS-EN-12916-TC - Tracked Changes. Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection
- BS-EN-13131 - Methods of test for petroleum and its products. Liquid petroleum products. Determination of nickel and vanadium content. Atomic absorption spectrometric method
- BS-EN-14077 - Petroleum products. Determination of organic halogen content. Oxidative microcoulometric method
- BS-EN-14639 - Crude tar and crude benzole. Characteristics and test methods
- BS-EN-14832 - Petroleum and related products. Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids
- BS-EN-14833 - Petroleum and related products. Determination of the hydrolytic stability of fire-resistant phosphate ester fluids
- BS-EN-15199-1 - Petroleum products. Determination of boiling range distribution by gas chromatography method
- BS-EN-15199-2 - Petroleum products. Determination of boiling range distribution by gas chromatography method
- BS-EN-15199-3 - Petroleum products. Determination of boiling range distribution by gas chromatography method
- BS-EN-15199-4 - Petroleum products. Determination of boiling range distribution by gas chromatography method
- BS-EN-15522-1 - Oil spill identification. Petroleum and petroleum related products
- BS-EN-15522-1-TC - Tracked Changes. Oil spill identification. Petroleum and petroleum related products
- BS-EN-15522-2 - Oil spill identification. Petroleum and petroleum related products
- BS-EN-15522-2-TC - Tracked Changes. Oil spill identification. Petroleum and petroleum related products
- BS-EN-15553 - Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method
- BS-EN-15553-TC - Tracked Changes. Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method
- BS-EN-241 - Methods of test for petroleum and its products. Liquid petroleum products. Determination of sodium content. Atomic absorption spectrometric method
- BS-EN-ISO-10370 - Petroleum products. Determination of carbon residue. Micro method
- BS-EN-ISO-13736 - Determination of flash point. Abel closed-cup method
- BS-EN-ISO-13736-TC - Tracked Changes. Determination of flash point. Abel closed-cup method
- BS-EN-ISO-14596 - Petroleum products. Determination of sulfur content. Wavelength-dispersive X-ray fluorescence spectrometry
- BS-EN-ISO-18335 - Petroleum products and related products. Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density. Method by constant pressure viscometer
- BS-EN-ISO-20844 - Petroleum and related products. Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
- BS-EN-ISO-20847 - Methods of test for petroleum and its products. BS 2000-496. Petroleum products. Determination of the sulfur content of automotive fuels. Energy-dispersive X-ray fluorescence spectrometry
- BS-EN-ISO-20884 - Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry
- BS-EN-ISO-2160 - Petroleum products. Corrosiveness to copper. Copper strip test
- BS-EN-ISO-22854 - Liquid petroleum products. Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel. Multidimensional gas chromatography method
- BS-EN-ISO-22854-TC - Tracked Changes. Liquid petroleum products. Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel. Multidimensional gas chromatography method
- BS-EN-ISO-22995 - Petroleum products. Determination of cloud point. Automated step-wise cooling method
- BS-EN-ISO-23581 - Petroleum products and related product. Determination of kinematic viscosity. Method by Stabinger type viscometer
- BS-EN-ISO-2592 - Petroleum and related products. Determination of flash and fire points. Cleveland open cup method
- BS-EN-ISO-2719 - Determination of flash point. Pensky-Martens closed cup method
- BS-EN-ISO-2719-TC - Tracked Changes. Determination of flash point. Pensky-Martens closed cup method
- BS-EN-ISO-3015 - Petroleum and related products from natural or synthetic sources. Determination of cloud point
- BS-EN-ISO-3016 - Petroleum and related products from natural or synthetic sources. Determination of pour point
- BS-EN-ISO-3104 - Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
- BS-EN-ISO-3104-TC - Tracked Changes. Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
- BS-EN-ISO-3171 - Methods of test for petroleum and its products. BS 2000-476: Petroleum liquids. Automatic pipeline sampling
- BS-EN-ISO-3679 - Determination of flash point. Method for flash no-flash and flash point by small scale closed cup tester
- BS-EN-ISO-3679-TC - Tracked Changes. Determination of flash point. Method for flash no-flash and flash point by small scale closed cup tester
- BS-EN-ISO-3680 - Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method
- BS-EN-ISO-3924 - Petroleum products. Determination of boiling range distribution. Gas chromatography method
- BS-EN-ISO-4259 - Petroleum products. Determination and application of precision data in relation to methods of test
- BS-EN-ISO-4259-1 - Petroleum and related products. Precision of measurement methods and results
- BS-EN-ISO-4259-2 - Petroleum and related products. Precision of measurement methods and results
- BS-EN-ISO-4259-4 - Petroleum and related products. Precision of measurement methods and results
- BS-EN-ISO-4259-5 - Petroleum and related products. Precision of measurement methods and results
- BS-EN-ISO-6245 - Methods of test for petroleum and its products. BS 2000-4: Determination of ash
- BS-EN-ISO-8754 - Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence spectrometry
- BS-EN-ISO-9038-TC - Tracked Changes. Determination of sustained combustibility of liquids
- BS-ISO-15029-2 - Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids
- BS-ISO-15029-2-TC - Tracked Changes. Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids
- BS-ISO-15597 - Methods of test for petroleum and its products. Determination of chlorine and bromine content. Wavelength-dispersive X-ray fluorescence spectrometry
- BS-ISO-1998-2 - Petroleum industry. Terminology
- BS-ISO-21493 - Petroleum products. Determination of turbidity point and aniline point equivalent
- BS-ISO-2909 - Methods of test for petroleum and its products. Petroleum products. Calculation of viscosity index from kinematic viscosity
- BS-ISO-5024 - Petroleum liquids and liquefied petroleum gases. Measurement. Standard reference conditions
- BS-ISO-6296 - Methods of test for petroleum and its products. Petroleum product. Determination of water. Potentiometric Karl Fischer titration method
- BS-ISO/TR-9494 - Petroleum Liquids, Automatic Pipeline Sampling, Statisticalassessment of Performance
- PD-CEN-15138 - Petroleum products and other liquids. Guide to flash point testing
- PD-CEN-15522-1 - Oil spill identification. Waterborne petroleum and petroleum products
- PD-CEN-15522-2 - Oil spill identification. Waterborne petroleum and petroleum products
- PD-ISO-13881 - Petroleum & Natural Gas Industries, Classification & Conformity Assessment of Products
- PD-ISO-15029-2 - Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids
- PD-ISO-19686-1 - Petroleum products. Equivalency of test method determining the same property
- PD-ISO-19686-100 - Petroleum products. Equivalency of test method determining the same property
- PD-ISO-19686-2 - Petroleum products. Equivalency of test method determining the same property
- PD-ISO-23877-1 - Petroleum and related products from natural or synthetic sources. Determination of pour point
- PD-ISO-29662 - Petroleum products and other liquids. Guidance for flash point and combustibility testing
ISO:
- ISO-10370 - Petroleum products - Determination of carbon residue - Micro method
- ISO-12185 - Crude petroleum, petroleum products and related products - Determination of density - Laboratory density meter with an oscillating U-tube sensor
- ISO-12937 - Petroleum products -- Determination of water -- Coulometric Karl Fischer titration method
- ISO-13736 - Determination of flash point - Abel closed-cup method
- ISO-13736-AM1 - - Amendment 1: Determination of flash point - Abel closed-cup method - Amendment 1: Bias statement update
- ISO-13881 - Petroleum and natural gas industries -- Classification and conformity assessment of products, processes and services
- ISO-14596 - Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry
- ISO-14597 - Petroleum products -- Determination of vanadium and nickel content -- Wavelength-dispersive X-ray fluorescence spectrometry
- ISO-14935 - Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids
- ISO-15029-1 - Petroleum and related products -- Determination of spray ignition characteristics of fire-resistant fluids -- Part 1: Spray flame persistence -- Hollow-cone nozzle method
- ISO-15029-2 - Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 2: Spray test - Stabilised flame heat release method
- ISO-1516 - Determination of flash/no flash - Closed cup equilibrium method
- ISO-1523 - Determination of flash point - Closed cup equilibrium method
- ISO-15597 - Petroleum and related products -- Determination of chlorine and bromine content -- Wavelength-dispersive X-ray fluorescence spectrometry
- ISO-16591 - Petroleum products - Determination of sulfur content - Oxidative microcoulometry method
- ISO-18455 - Petroleum products -- Calculation of specific energy of residual fuels from physical and compositional properties -- Basic data
- ISO-19441 - Petroleum products - Density versus temperature relationships of current fuels, biofuels and biofuel components
- ISO-19686-1 - Petroleum products - Equivalency of test method determining the same property - Part 1: Atmospheric distillation of petroleum products
- ISO-19686-100 - Petroleum products - Equivalency of test method determining the same property - Part 100: Background and principle of the comparison and the evaluation of equivalency
- ISO-19686-2 - Petroleum products - Equivalency of test method determining the same property - Part 2: Density of petroleum products
- ISO-1998-1 - Petroleum industry -- Terminology -- Part 1: Raw materials and products
- ISO-1998-2 - Petroleum industry -- Terminology -- Part 2: Properties and tests
- ISO-1998-3 - Petroleum industry -- Terminology -- Part 3: Exploration and production
- ISO-1998-4 - Petroleum industry -- Terminology -- Part 4: Refining
- ISO-1998-5 - Petroleum industry -- Terminology -- Part 5: Transport, storage, distribution
- ISO-1998-6 - Petroleum industry - Terminology - Part 6: Measurement
- ISO-1998-7 - Petroleum industry -- Terminology -- Part 7: Miscellaneous terms
- ISO-1998-99 - Petroleum industry - Terminology - Part 99: General and index
- ISO-2049 - Petroleum products -- Determination of colour (ASTM scale)
- ISO-20764 - Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method
- ISO-20823 - Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test
- ISO-20844 - Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
- ISO-20847 - Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry
- ISO-20884 - Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry
- ISO-20884-AM1 - - Amendment 1: Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry - Amendment 1: Addition of the SSD detector to the Monochromatic excitation part of Table 1
- ISO-21493 - Petroleum products - Determination of turbidity point and aniline point equivalent
- ISO-2160 - Petroleum products -- Corrosiveness to copper -- Copper strip test
- ISO-22854 - Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method
- ISO-22995 - Petroleum products - Determination of cloud point - Automated step-wise cooling method
- ISO-23581 - Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscometer
- ISO-23877-1 - Petroleum and related products from natural or synthetic sources - Determination of pour point - Part 1: Automated step-wise cooling method
- ISO-2592 - Petroleum and related products - Determination of flash and fire points - Cleveland open cup method
- ISO-2719 - Determination of flash point - Pensky-Martens closed cup method
- ISO-2719-AM1 - - Amendment 1: Thermometers correction
- ISO-2909 - Petroleum products - Calculation of viscosity index from kinematic viscosity
- ISO-29662 - Petroleum products and other liquids - Guidance for flash point and combustibility testing
- ISO-2977 - Petroleum products and hydrocarbon solvents - Determination of aniline point and mixed aniline point
- ISO-3007 - Petroleum products and crude petroleum -- Determination of vapour pressure -- Reid method
- ISO-3015 - Petroleum and related products from natural or synthetic sources - Determination of cloud point
- ISO-3016 - Petroleum and related products from natural or synthetic sources - Determination of pour point
- ISO-3104 - Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
- ISO-3170 - Petroleum liquids - Manual sampling
- ISO-3171 - Petroleum liquids -- Automatic pipeline sampling
- ISO-3405 - Petroleum and related products from natural or synthetic sources - Determination of distillation characteristics at atmospheric pressure
- ISO-3675 - Crude petroleum and liquid petroleum products -- Laboratory determination of density -- Hydrometer method
- ISO-3679 - Determination of flash point . Method for flash no-flash and flash point by small scale closed cup tester
- ISO-3680 - Determination of flash/no flash - Rapid equilibrium closed cup method
- ISO-3733 - Petroleum products and bituminous materials -- Determination of water -- Distillation method
- ISO-3771 - Petroleum products - Determination of base number - Perchloric acid potentiometric titration method
- ISO-3837 - Liquid petroleum products -- Determination of hydrocarbon types -- Fluorescent indicator adsorption method
- ISO-3837-AM1 - - Amendment 1
- ISO-3838 - Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
- ISO-3838-AM1 - - Amendment 1: Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods - Amendment 1
- ISO-3839 - Petroleum products -- Determination of bromine number of distillates and aliphatic olefins -- Electrometric method
- ISO-3839-AM1 - - Amendment 1
- ISO-3924 - Petroleum products - Determination of boiling range distribution - Gas chromatography method
- ISO-3993 - Liquefied petroleum gas and light hydrocarbons -- Determination of density or relative density -- Pressure hydrometer method
- ISO-4259 - Petroleum products - Determination and application of precision data in relation to methods of test
- ISO-4259-1 - Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test
- ISO-4259-1-AM1 - - Amendment 1
- ISO-4259-1-AM2 - - Amendment 2: Updating definition of r and R
- ISO-4259-2 - Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test
- ISO-4259-2-AM1 - - Amendment 1
- ISO-4259-4 - Petroleum and related products - Precision of measurement methods and results - Part 4: Use of statistical control charts to validate in-statistical-control status for the execution of a standard test method in a single laboratory
- ISO-4259-5 - Petroleum and related products - Precision of measurement methods and results - Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property
- ISO-4262 - Petroleum products -- Determination of carbon residue -- Ramsbottom method
- ISO-5275 - Petroleum products and hydrocarbon solvents - Detection of thiols and other sulfur species - Doctor test
- ISO-5661 - Petroleum products -- Hydrocarbon liquids -- Determination of refractive index
- ISO-6245 - Petroleum products - Determination of ash
- ISO-6293-1 - Petroleum products -- Determination of saponification number -- Part 1: Colour-indicator titration method
- ISO-6293-2 - Petroleum products -- Determination of saponification number -- Part 2: Potentiometric titration method
- ISO-6296 - Petroleum products -- Determination of water -- Potentiometric Karl Fischer titration method
- ISO-6614 - Petroleum products -- Determination of water separability of petroleum oils and synthetic fluids
- ISO-6614-AM1 - - Amendment 1
- ISO-6615 - Petroleum products -- Determination of carbon residue -- Conradson method
- ISO-6618 - Petroleum products and lubricants -- Determination of acid or base number -- Colour-indicator titration method
- ISO-6619 - Petroleum products and lubricants -- Neutralization number -- Potentiometric titration method
- ISO-7120 - Petroleum products and lubricants -- Petroleum oils and other fluids -- Determination of rust-preventing characteristics in the presence of water
- ISO-7537 - Petroleum products -- Determination of acid number -- Semi-micro colour-indicator titration method
- ISO-7624 - Petroleum products and lubricants -- Inhibited mineral turbine oils -- Determination of oxidation stability
- ISO-8681 - Petroleum products and lubricants -- Method of classification -- Definition of classes
- ISO-8754 - Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry
- ISO-9038 - Determination of sustained combustibility of liquids
- ISO-9770 - Crude petroleum and petroleum products -- Compressibility factors for hydrocarbons in the range 638 kg/m3 to 1 074 kg/m3
Other SDOs:
- BS-EN-ISO-12185-TC - Tracked Changes. Crude petroleum, petroleum products and related products. Determination of density. Laboratory density meter with an oscillating U tube sensor
- DIN-51405 - General Principles Governing the Gas Chromatographic Analysis of Petroleum Products &
- DIN-51412-1 - Part 1: Laboratory Method, Testing of Petroleum Products - Determination of Electrical
- DIN-51412-2 - Testing of petroleum products - Determination of the electrical conductivity - Part 2: Field method
- DIN-51422-2 - Testing of Petroleum Products, Gas Chromatographic Determination of the Purity of Ceta
- DIN-51444 - Determination of Bound Nitrogen in Petroleum Products by Combustion & Chemiluminescenc
- DIN-51581-1 - Testing of petroleum products - Determination of evaporation loss - Part 1: Noack test
- DIN-EN-12766-3 - Part 3: Determination & Quantification of Polychlorinated Terphenyls (Pct) & Polychlor
- DIN-EN-12916 - Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection; German version EN 12916:2016
- DIN-EN-14331 - Liquid Petroleum Products, Separation & Characterization Offatty Acid Methyl Esters (
- DIN-EN-14639 - Crude Tar & Crude Benzole, Characteristics & Test Methods
- DIN-EN-14832 - Petroleum & Related Products, Determination of the Oxidation Stability & Corrosivity O
- DIN-EN-14833 - Petroleum & Related Products, Determination of the Hydrolytic Stability of Fire-Resist
- DIN-EN-15199-1 - Part 1: Middle Distillates & Lubricating Base Oils, Petroleum Products - Determination
- DIN-EN-15199-2 - Part 2: Heavy Distillates & Residual Fuels, Petroleum Products - Determination of Boil
- DIN-EN-ISO-1516 - Determination of Flash/No Flash, Closed Cup Equilibrium Method
- DIN-EN-ISO-20844 - Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
- DIN-EN-ISO-20846 - Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method
- DIN-EN-ISO-2719 - Determination of flash point - Pensky-Martens closed cup method
- DIN-EN-ISO-3170 - Petroleum Liquids - Manual Sampling
- DIN-EN-ISO-3679 - Determination of flash no-flash and flash point - Rapid equilibrium closed cup method
- DIN-EN-ISO-3838 - Crude Petroleum & Liquid or Solid Petroleum Products, Determination of Density or Rela
- DIN-EN-ISO-4259 - Petroleum Products - Determination & Application of Precision Data in Relation To Meth
- DIN-EN-ISO-8754 - Petroleum Products - Determination of Sulfur Content, Energy-Dispersive X-Ray Fluoresc
- DIN-ISO-15597 - Petroleum & Related Products - Determination of Chlorine & Bromine Content - Wavelengt
- EN-12766-3 - Part 3: Determination & Quantification of Polychlorinated Terphenyls (Pct) & Polychlor
- EN-12916 - Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
- EN-14077 - Petroleum Products, Determination of Organic Halogen Content- Oxidative Microcoulometr
- EN-14639 - Crude Tar & Crude Benzole, Characteristics & Test Methods
- EN-14832 - Petroleum & Related Products, Determination of the Oxidation Stability & Corrosivity O
- EN-14833 - Petroleum & Related Products, Determination of the Hydrolytic Stability of Fire-Resist
- EN-15199-1 - Part 1: Middle Distillates & Lubricating Base Oils, Petroleum Products - Determination
- EN-15199-2 - Part 2: Heavy Distillates & Residual Fuels, Petroleum Products - Determination of Boil
- EN-15199-3 - Petroleum Products, Determination of Boiling Range Distribution by Gas Chromatography
- EN-15199-4 - Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
- EN-15553 - Petroleum Products & Related Materials, Determination of Hydrocarbon Types, Fluorescen
- EN-241 - Liquid Petroleum Products, Determination of Sodium Content -Atomic Absorption Spectrom
- EN-ISO-10370 - Petroleum products - Determination of carbon residue - Micro method
- EN-ISO-13736 - Determination of flash point - Abel closed-cup method (ISO 13736:2013)
- EN-ISO-14596 - Petroleum Products - Determination of Sulfur Content - Wavelength-Dispersive X-Ray Flu
- EN-ISO-20844 - Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
- EN-ISO-20884 - Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry
- EN-ISO-2160 - Petroleum Products, Corrosiveness To Copper, Copper Strip Test
- EN-ISO-22854 - Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method
- EN-ISO-22995 - Petroleum products - Determination of cloud point - Automated step-wise cooling method (ISO 22995:2019)
- EN-ISO-2592 - Petroleum and related products - Determination of flash and fire points - Cleveland open cup method
- EN-ISO-2719 - Determination of flash point - Pensky-Martens closed cup method
- EN-ISO-3015 - Petroleum and related products from natural or synthetic sources - Determination of cloud point (ISO 3015:2019)
- EN-ISO-3016 - Petroleum and related products from natural or synthetic sources - Determination of pour point (ISO 3016:2019)
- EN-ISO-3104 - Petroleum Products, Determination of Kinematic Viscosity and Calculation of Dynamic Visc
- EN-ISO-3170 - Petroleum Liquids, Manual Sampling
- EN-ISO-3679 - Determination of flash no-flash and flash point - Rapid equilibrium closed cup method
- EN-ISO-3680 - Determination of Flash/No Flash, Rapid Equilibrium Closed Cup Method
- EN-ISO-3838 - Crude Petroleum & Liquid or Solid Petroleum Products, Determination of Density or Rela
- EN-ISO-3924 - Petroleum products - Determination of boiling range distribution - Gas chromatography method
- EN-ISO-4259 - Petroleum Products - Determination & Application of Precision Data in Relation To Meth
- EN-ISO-4259-1 - Petroleum and related products. Precision of measurement methods and results. Determination of precision data in relation to methods of test
- EN-ISO-4259-2 - Petroleum and related products. Precision of measurement methods and results. Interpretation and application of precision data in relation to methods of test
- EN-ISO-8754 - Petroleum Products, Determination of Sulfur Content, Energy-Dispersive X-Ray Fluoresce
- EN-ISO-9038 - Determination of sustained combustibility of liquids (ISO 9038:2013)
- JIS-K-2270-1 - Crude petroleum and petroleum products -- Determination of carbon residue -- Part 1: Conradson method
- JIS-K-2270-2 - Crude petroleum and petroleum products -- Determination of carbon residue -- Part 2: Micro method
- JIS-K-2536-4 - Liquid petroleum products -- Testing method of components -- Part 4: Determination of components by tandem type gas chromatography
- JIS-K-2541-1 - Crude oil and petroleum products -- Determination of sulfur content Part 1: Wickbold combustion method
- JIS-K-2541-2 - Crude oil and petroleum products -- Determination of sulfur content Part 2: Oxidative microcoulometry
- JIS-K-2541-3 - Crude oil and petroleum products -- Determination of sulfur content Part 3: Quartz-tube combustion method (Air method)
- JIS-K-2541-4 - Crude oil and petroleum products -- Determination of sulfur content Part 4: Energy-dispersive X-ray fluorescence method
- JIS-K-2541-5 - Crude oil and petroleum products -- Determination of sulfur content Part 5: General bomb method
- JIS-K-2541-6 - Crude petroleum and petroleum products -- Determination of sulfur content Part 6: Ultraviolet fluorescence method
- JIS-K-2541-7 - Crude oil and petroleum products -- Determination of sulfur content Part 7: Wavelength-dispersive X-ray fluorescence method
- SIS-155133 - Petroleum products - Determination of colour
- SIS-155143 - Aviation fuels. Determination of freezing point
- SIS-155146 - Petroleum products - Determination of distillation characteristics
- SIS-155154 - Crude petroleum and fuel oils - Determination of sediment - Extraction method
- SIS-ISO/TR-19686-1 - Petroleum products Equivalency of test method determining the same property Part 1: Atmospheric distillation of petroleum products
- SIS-ISO/TR-19686-2 - Petroleum products - Equivalency of test method determining the same property - Part 2: Density of petroleum products
- SIS-ISO/TR-29662 - Petroleum products and other liquids Guidance for flash point and combustibility testing (ISO/TR 29662:2020, IDT)
- SIS-ISO/TS-23877-1 - Petroleum and related products from natural or synthetic sources Determination of pour point Part 1: Automated step-wise cooling method (ISO/TS 23877-1:2023, IDT)
- SS-150214 - Petroleum products - Determination of gasoline diluent in used gasoline engine oils by distillation
- SS-155115 - Petroleum products - Determination of sulfur by hydrogenolysis and ratiometric colorimetry
- SS-155122 - Diesel and domestic heating fuels - Determinationof cold filter plugging point
- SS-155123 - Paints, varnishes, petroleum and related products- Determination of flash point - Abel-Pensky closed tester
- SS-155124 - Paints, varnishes, petroleum and related products- Determination of flash point by the Abel-Penskytester with stirrer
- SS-155126 - Paints, varnishes, petroleum and related products- Determination of flashpoint - Rapid equilibriummethod
- SS-155127 - Paints, varnishes, petroleum and related products- Flash/no flash test - Rapid equilibrium method
- SS-155137 - Petroleum products - Gas turbine fuels - Determination of sticking temperature of ash
- SS-155138 - Petroleum products - Calculation of heat of combustion
- SS-155147 - Aviation fuels - Determination of water reaction
- SS-155148 - Petroleum products - Aviation and distillate fuels containing a static dissipator additive - Determination of electrical conductivity
- SS-155149 - Petroleum products - Calculation of viscosity index from kinematic viscosity
- SS-155156 - Crude petroleum and fuel oils - Determination of water and sediment- Centrifuge method
- SS-155157 - Petroleum products - Total base number - Perchloric acid potentiometric titration method
- SS-155168 - Liquefied petroleum gases - Determination of vapour pressure - LPG method
- SS-155410 - Fuel oils - Requirements
- SS-155443 - Petroleum liquids and gases - Measurement - Standard reference conditions
- SS-EN-12 - Petroleum products - Determination of Reid vapourpressure - Wet method
- SS-EN-12766-1 - Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)
- SS-EN-12766-2 - Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content
- SS-EN-12766-3 - Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD)
- SS-EN-12916 - Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
- SS-EN-13016-1 - Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
- SS-EN-13016-2 - Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute vapour pressure (AVP) between 40°C and 100°C
- SS-EN-13131 - Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method
- SS-EN-14077 - Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method
- SS-EN-14331 - Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method
- SS-EN-14596 - Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
- SS-EN-14639 - Crude tar and crude benzole - Characteristics and test methods
- SS-EN-14832 - Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids
- SS-EN-14833 - Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids
- SS-EN-15199-1 - Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils
- SS-EN-15199-2 - Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels
- SS-EN-15199-3 - Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil
- SS-EN-15199-4 - Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
- SS-EN-15522-1 - Oil spill identification - Petroleum and petroleum related products - Part 1: Sampling
- SS-EN-15522-2 - Oil spill identification - Petroleum and petroleum related products - Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses
- SS-EN-15553 - Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method
- SS-EN-15944 - Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
- SS-EN-1993-3-1 - Eurocode 3 - Design of steel structures - Part 3-1: Towers and masts and chimneys - Towers and masts
- SS-EN-22719 - Petroleum products and lubricants - Determinationof flash point - Pensky-Martens closed cup method(ISO 2719:1988)
- SS-EN-23015 - Petroleum oils - Determination of cloud point (ISO 3015:1992)
- SS-EN-24260 - Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method (ISO 4260:1987)
- SS-EN-ISO-10370 - Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014)
- SS-EN-ISO-12937 - Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000)
- SS-EN-ISO-13032 - Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012)
- SS-EN-ISO-13736 - Determination of flash point - Abel closed-cup method (ISO 13736:2021)
- SS-EN-ISO-13736-AM1 - Determination of flash point - Abel closed-cup method - Amendment 1: Bias statement update (ISO 13736:2021/Amd 1:2022)
- SS-EN-ISO-14596 - Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:2007)
- SS-EN-ISO-14597 - Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray flourescence spectrometry (ISO 14597:1997)
- SS-EN-ISO-14935 - Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids (ISO 14935:2020)
- SS-EN-ISO-15029-1 - Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method (ISO 15029-1:1999)
- SS-EN-ISO-1516 - Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002)
- SS-EN-ISO-1523 - Determination of flash-point - Closed cup equilibrium method (ISO 1523:2002)
- SS-EN-ISO-16591 - Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010)
- SS-EN-ISO-20623 - Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of lubricants - Four-ball method (European conditions) (ISO 20623:2017)
- SS-EN-ISO-20764 - Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO 20764:2003)
- SS-EN-ISO-20823 - Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surface - Manifold ignition test
- SS-EN-ISO-20844 - Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO 20844:2015)
- SS-EN-ISO-20846 - Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2019)
- SS-EN-ISO-20847 - Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)
- SS-EN-ISO-20884 - Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2019)
- SS-EN-ISO-20884-AM1 - Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry - Amendment 1: Addition of the SSD detector to the Monochromatic excitation part of Table 1 (ISO 20884:2019/Amd 1:2021)
- SS-EN-ISO-2160 - Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)
- SS-EN-ISO-22854 - Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method (ISO 22854:2021)
- SS-EN-ISO-22995 - Petroleum products - Determination of cloud point - Automated step-wise cooling method (ISO 22995:2019)
- SS-EN-ISO-2592 - Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017)
- SS-EN-ISO-2719 - Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
- SS-EN-ISO-2719-AM1 - Determination of flash point - Pensky-Martens closed cup method - Amendment 1: Thermometers correction (ISO 2719:2016/Amd 1:2021)
- SS-EN-ISO-3015 - Petroleum and related products from natural or synthetic sources - Determination of cloud point (ISO 3015:2019)
- SS-EN-ISO-3016 - Petroleum and related products from natural or synthetic sources - Determination of pour point (ISO 3016:2019)
- SS-EN-ISO-3104 - Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020)
- SS-EN-ISO-3170 - Petroleum liquids - Manual sampling (ISO 3170:2004)
- SS-EN-ISO-3171 - Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)
- SS-EN-ISO-3405 - Petroleum and related products from natural or synthetic sources - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2019)
- SS-EN-ISO-3675 - Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
- SS-EN-ISO-3679 - Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022)
- SS-EN-ISO-3680 - Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004)
- SS-EN-ISO-3838 - Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
- SS-EN-ISO-3924 - Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2019)
- SS-EN-ISO-3993 - Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984)
- SS-EN-ISO-4259 - Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006)
- SS-EN-ISO-4259-1 - Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test (ISO 4259-1:2017)
- SS-EN-ISO-4259-1-AM1 - Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test - Amendment 1 (ISO 4259-1:2017/Amd 1:2019)
- SS-EN-ISO-4259-1-AM2 - Petroleum and related products - Precision of measurement methods and results - Part 1:Determination of precision data in relation to methods of test - AMENDMENT 2 (ISO 4259-1:2017/Amd 2:2020)
- SS-EN-ISO-4259-2 - Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test (ISO 4259-2:2017)
- SS-EN-ISO-4259-2-AM1 - Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test - Amendment 1 (ISO 4259-2:2017/Amd 1:2019)
- SS-EN-ISO-4259-3 - Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
- SS-EN-ISO-4259-4 - Petroleum and related products - Precision of measurement methods and results - Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO 4259-4:2021)
- SS-EN-ISO-6245 - Petroleum products - Determination of ash (ISO 6245:2001)
- SS-EN-ISO-8754 - Petroleum products - Determination of sulfur content - Energy-dispersive X-ray flourescence spectrometry (ISO 8754:2003)
- SS-EN-ISO-9038 - Determination of sustained combustibility of liquids (ISO 9038:2021)
- SS-ISO-14597 - Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry
- SS-ISO-15029-2 - Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 2: Spray test - Stabilised flame heat release method (ISO 15029-2:2018, IDT)
- SS-ISO-15597 - Petroleum and related products - Determination of chlorine and bromine content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 15597:2001, IDT)
- SS-ISO-2049 - Petroleum products - Determination of colour (ASTM scale)
- SS-ISO-21493 - Petroleum products - Determination of turbidity point and aniline point equivalent (ISO 21493:2019, IDT)
- SS-ISO-23581 - Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscometer (ISO 23581:2020, IDT)
- SS-ISO-2592 - Petroleum products - Determination of flash and fire points - Cleveland open cup method
- SS-ISO-2909 - Petroleum products - Calculation of viscosity index from kinematic viscosity
- SS-ISO-2977 - Petroleum products and hydrocarbon solvents - Determination of aniline point and mixed aniline point - Technical corrigendum 1
- SS-ISO-3104 - Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
- SS-ISO-3170 - Petroleum liquids - Manual sampling
- SS-ISO-3171 - Petroleum liquids - Automatic pipeline sampling
- SS-ISO-3733 - Petroleum products and bituminous materials - Determination of water - Distillation method
- SS-ISO-3837 - Rubber, vulcanized - Determination of density
- SS-ISO-3839 - Petroleumproducts - Determination of bromine number of distillates and aliphatic olefins - Electrometric method
- SS-ISO-3839-AM1 - Petroleum products - Determination of bromine number of distillates and aliphatic olefins - Electrometric method - Amendment 1 (ISO 3839:1996/Amd 1:2020, IDT)
- SS-ISO-4260 - Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method
- SS-ISO-4262 - Petroleumproducts - Determination of carbon residue - Ramsbottom method
- SS-ISO-5024 - Petroleum liquids and liquefied petroleum gases - Measurement - Standard reference conditions
- SS-ISO-5275 - Petroleum products and hydrocarbon solvents - Detection of thiols and other sulfur species - Doctor test (ISO 5275:2003, IDT)
- SS-ISO-5661 - Petroleum products - Hydrocarbon liquids - Determination of refractive index
- SS-ISO-6245 - Petroleum products - Determination of ash
- SS-ISO-6293 - Petroleum products - Determination of saponification number
- SS-ISO-6293-1 - Petroleumproducts - Determination of saponification number - Part 1: Colour-indicator titration method
- SS-ISO-6293-2 - Petroleum products - Determination of saponification number - Part 2: Potentiometric titration method
- SS-ISO-6615 - Petroleum products - Determination of carbon residue - Conradson method
- SS-ISO-6618 - Petroleum products and lubricants - Determinationof acid or base number - Colour-indicator titration method
- SS-ISO-6619 - Petroleum products and lubricants - Neutralization number - Potentiometric titration method
- SS-ISO-8681 - Petroleum products and lubricants - Method of classification - Definition of classes
- SS-ISO-91 - Petroleum and related products - Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions (ISO 91:2017, IDT)
- SS-ISO-9770 - Crude petroleum and petroleum products - Compressibility factors for hydrocarbons in the range 638 kg/m3 to 1074 kg/m3
- SS-ISO/TR-9494 - Petroleum liquids - Automatic pipeline sampling - Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids
- UNE-EN-12916 - Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
- UNE-EN-ISO-20844 - Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
- UNE-EN-ISO-22854 - Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method