Document Center List of Standards on Steels
ICS Code 77.080.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1082 - Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
- ASTM-A1106 - Standard Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application
- ASTM-A193 - Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
- ASTM-A255 - Standard Test Methods for Determining Hardenability of Steel
- ASTM-A320 - Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
- ASTM-A664 - Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
- ASTM-A710 - Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
- ASTM-A725 - Specification for Flat-Rolled, Grain-Oriented, Silicon Iron, Electrical Steel, Fully Processed, Types 27H076, 30H083, 35H094 (Withdrawn 1988)
- ASTM-A725M - Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 27H168m, 30H183m, 35H207m (Withdrawn 1988)
- ASTM-E1063 - Test Method for X-Ray Emission Spectrometric Determination of Cerium and Lanthanum in Carbon and Low-Alloy Steel (Withdrawn 1998)
- ASTM-E1077 - Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
- ASTM-E3039 - Standard Test Method for Determination of Crack-Tip-Opening Angle of Ferritic Steels Using DWTT-Type Specimens
- ASTM-E404 - Standard Test Method for Spectrographic Determination of Boron In Carbon and Low Alloy Steel by the Point-To-Plane Technique (Withdrawn 2006)
- ASTM-E415 - Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
- ASTM-E693 - Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA)
- ASTM-E975 - Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation (Withdrawn 2022)
BSI:
- BS-1485 - Specification for zinc coated hexagonal steel wire netting
- BS-5046 - Method for the estimation of equivalent diameters in the heat treatment of steel
- BS-5259 - Recommendations for the order of reporting elements in the analysis of steel
- BS-6200-3.33.1 - Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tungsten
- BS-6200-3.33.2 - Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tungsten
- BS-6200-4 - Sampling and analysis of iron, steel and other ferrous metals
- BS-7079-B8 - Methods for the Assessment of Surface Cleanliness - Field Method for the Refractometri
- BS-EN-10020 - Definition and classification of grades of steel
- BS-EN-10021 - General technical delivery conditions for steel products
- BS-EN-10027-1 - Designation systems for steels
- BS-EN-10027-2 - Designation systems for steels
- BS-EN-10168 - Steel products. Inspection documents. List of information and description
- BS-EN-10177 - Steels. Determination of calcium content. Flame atomic absorption spectrometric method (FAAS)
- BS-EN-10178 - Steels. Determination of niobium. Spectrophotometric method
- BS-EN-10178-TC - Tracked Changes. Steels. Determination of niobium. Spectrophotometric method
- BS-EN-10179 - Steels. Determination of nitrogen (trace amounts). Spectrophotometric method
- BS-EN-10179-TC - Tracked Changes. Steels. Determination of nitrogen (trace amounts). Spectrophotometric method
- BS-EN-10181 - Steels. Determination of lead content. Flame atomic absorption spectrometric method (FAAS)
- BS-EN-10188 - Steels and cast irons. Determination of chromium content. Flame atomic absorption spectrometric method (FAAS)
- BS-EN-10188-TC - Tracked Changes. Steels and cast irons. Determination of chromium content. Flame atomic absorption spectrometric method (FAAS)
- BS-EN-10276-1 - Chemical analysis of ferrous materials. Determination of oxygen in steel and iron
- BS-EN-10325 - Steel. Determination of yield strength increase by the effect of heat treatment (Bake-Hardening-Index)
- BS-EN-10373 - Determination of the physical and mechanical properties of steels using models
- BS-EN-ISO-13900 - Steel. Determination of boron content. Curcumin spectrophotometric method after distillation
- BS-EN-ISO-15349-2-TC - Tracked Changes. Unalloyed steel. Determination of low carbon content
- BS-EN-ISO-3690 - Welding and allied processes. Determination of hydrogen content in arc weld metal
- BS-EN-ISO-4945 - Steel. Determination of nitrogen. Spectrophotometric method
- BS-EN-ISO-4945-TC - Tracked Changes. Steel. Determination of nitrogen. Spectrophotometric method
- BS-EN-ISO-6306 - Chemical analysis of steel. Order of listing elements in steel standards
- BS-EN-ISO-9658-TC - Tracked Changes. Steel. Determination of aluminium content. Flame atomic absorption spectrometric method
- BS-ISO-13899-2 - Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method
- BS-ISO-20915 - Life cycle inventory calculation methodology for steel products
- BS-ISO-404 - Steel and steel products. General technical delivery requirements
- BS-ISO-6306 - Chemical analysis of steel. Order of listing elements in steel standards
- DD-ENV-13797 - Corrosion Protection, Carbon & Low Alloy Steels for Use in Hydrogen Sulfide Containing
- DD-ISO-13899-3 - Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method
- DD-ISO-15235 - Preparation of Steel Substrates Before Application of Paints & Related Products, Colle
- PD-CEN-10362 - Chemical analysis of ferrous materials. Determination of selenium in steels. Electrothermal atomic absorption spectrometric method
- PD-CEN-10367 - Alloyed steels. Determination of chromium content. Inductively coupled plasma optical emission spectrometric method
- PD-CR-10313 - Classification of grades of steel. Examples of classification related to European standards
- PD-ISO-20580 - Preparation of metallographic specimens
- PD-ISO-6084 - Steel and steel products. Vocabulary relating to chemical analysis
- PD-ISO-7705 - Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications
ISO:
- ISO-10153 - Steel -- Determination of boron content -- Curcumin spectrophotometric method
- ISO-10278 - Steel -- Determination of manganese content -- Inductively coupled plasma atomic emission spectrometric method
- ISO-10697-1 - Steel -- Determination of calcium content by flame atomic absorption spectrometry -- Part 1: Determination of acid-soluble calcium content
- ISO-10697-2 - Steel -- Determination of calcium content by flame atomic absorption spectrometry -- Part 2: Determination of total calcium content
- ISO-10698 - Steel -- Determination of antimony content -- Electrothermal atomic absorption spectrometric method
- ISO-11653 - Steel -- Determination of high cobalt content -- Potentiometric titration method after separation by ion exchange
- ISO-13899-1 - Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 1: Determination of Mo content
- ISO-13899-2 - Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 2: Determination of Nb content
- ISO-13899-3 - Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 3: Determination of W content
- ISO-13900 - Steel -- Determination of boron content -- Curcumin spectrophotometric method after distillation
- ISO-14250 - Steel -- Metallographic characterization of duplex grain size and distributions
- ISO-15349-1 - Unalloyed steel -- Determination of low carbon content -- Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation)
- ISO-15349-2 - Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating)
- ISO-15349-3 - Unalloyed steel -- Determination of low carbon content -- Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating)
- ISO-17054 - Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique
- ISO-17055 - Steel - Determination of silicon content - Inductively coupled plasma atomic emission spectrometric method
- ISO-17925 - Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
- ISO-20580 - Preparation of metallographic specimens
- ISO-20915 - Life cycle inventory calculation methodology for steel products
- ISO-377-2 - Selection and preparation of samples and test pieces of wrought steels -- Part 2: Samples for the determination of the chemical composition
- ISO-404 - Steel and steel products - General technical delivery requirements
- ISO-404-AM1 - - Amendment 1: Steel and steel products - General technical delivery requirements - Amendment 1
- ISO-4945 - Steel - Determination of nitrogen - Spectrophotometric method
- ISO-4948-1 - Steels -- Classification -- Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition
- ISO-4948-2 - Steels -- Classification -- Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics
- ISO-4949 - Steel names based on letter symbols
- ISO-6084 - Steel and steel products - Vocabulary relating to chemical analysis
- ISO-6306 - Chemical analysis of steel - Order of listing elements in steel standards
- ISO-7705 - Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications
- ISO-9441 - Steel -- Determination of niobium content -- PAR spectrophotometric method
- ISO-9658 - Steel - Determination of aluminium content - Flame atomic absorption spectrometric method
Other SDOs:
- BS-EN-ISO-3690-TC - Tracked Changes. Welding and allied processes. Determination of hydrogen content in arc weld metal
- DIN-EN-10020 - Definition and classification of grades of steel; German version EN 10020:2000
- DIN-EN-10027-1 - Designation systems for steels - Part 1: Steel names; German version EN 10027-1:2016
- DIN-EN-10168 - Steel products - Inspection documents - List of information and description; German version EN 10168:2004
- DIN-EN-10325 - Steel - Determination of Yield Strength Increase by the Effect of Heat Treatment (Bake
- EN-10021 - General Technical Delivery Conditions for Steel Products
- EN-10027-1 - Designation systems for steels - Part 1: Steel names
- EN-10027-2 - Designation systems for steels - Part 2: Numerical system
- EN-10168 - Steel Products - Inspection Documents, List of Information & Description
- EN-10325 - Steel - Determination of Yield Strength Increase by the Effect of Heat Treatment (Bake
- EN-ISO-4945 - Steel, Determination of Nitrogen Content, Spectrophotometric Method
- JIS-G-0303 - General Rules for Inspection of Steel
- JIS-G-0404 - Steel and steel products -- General technical delivery requirements
- JIS-G-0416 - Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
- JIS-G-0551 - Steels -- Micrographic determination of the apparent grain size
- JIS-G-0553-AM1 - Steel -- Macroscopic examination by etching (Amendment 1)
- JIS-G-0558 - Steels -- Determination of depth of decarburization
- JIS-G-0560 - Method of sulphur print for steel
- JIS-G-0561 - Method of hardenability test for steel (End quenching method)
- MMS-900 - Stainless steels - Summary
- MNC-1202 - Steel and cast iron - International standards formethods for chemical analysis
- MNC-720 - Steels for castings - Summary
- MNC-811 - Allm"nna konstruktionsst+l - R"r - Tversikt
- MNC-830 - Tryckk"rlsst+l - Pl+t. Band. St+ng. Smide - Tversikt
- MNC-831 - Tryckk"rlsst+l - R"r - Tversikt
- MNC-842 - Steels for wire - Summary
- MNC-845 - Automatst+l - Tversikt
- MNC-850 - Steels for general engineering - Summary
- MNC-852 - Steels for hardening and tempering - Summary
- MNC-870 - Spring steels - Summary
- MNC-880 - Tool steels - Summary
- MNC-901 - Rostfritt st+l - Tryckk"rlsst+l - Tversikt
- MNC-915 - Steels for cold rolled sheet for lock-forming anddrawing - Summary
- MNC-916 - Structural steels for cold rolled sheet - Summary
- MNC-920 - St+l f"r kallvalsat band - Tversikt
- SIS-141305 - Cast steel
- SIS-141316 - Steel for cold rolled sheet. Structural quality
- SIS-141325 - Steel for screws and rivets
- SIS-141426 - Steel for cold rolled sheet - Structural quality
- SIS-142136 - Steel for cold rolled sheet. Structural quality
- SIS-CEN/TR-10362 - Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method
- SIS-CEN/TR-10367 - Alloyed steels - Determination of chromium content - Inductively coupled plasma optical emission spectrometric method
- SIS-ISO/TS-4949 - Steel names based on letter symbols
- SS-141312 - Allmänt konstruktionsstål - SS-stål 13 12
- SS-141365 - Steel for tensional strapping - SS-steel 13 65
- SS-141412 - Structural steel
- SS-141450 - General engineering steel - SS-steel 14 50
- SS-141465 - Steel for tensional strapping - SS-steel 14 65
- SS-141550 - General engineering steel - SS-steel 15 50
- SS-141565 - Steel for tensional strapping - SS-steel 15 65
- SS-141650 - General engineering steel - SS-steel 16 50
- SS-141655 - General engineering steel - SS-steel 16 55
- SS-141770 - Spring stell - SS steel 17 70
- SS-142132 - Structural steel - Microalloyed steel - SS-steel 2132
- SS-142134 - Structural steel - Microalloyed steel - SS-steel 2134
- SS-142135 - Structural steel - Microalloyed steel - SS-steel 2135
- SS-142142 - Structural steel - Microalloyed steel - SS-steel 21 42
- SS-142144 - Structural steel - Microalloyed steel - SS-steel 21 44
- SS-142145 - Structural steel - Microalloyed steel - SS-steel 21 45
- SS-142146 - Steel for cold rolled sheet - Structural quality
- SS-142172 - Structural steel
- SS-142174 - Structural steel - SS steel 21 74
- SS-142346 - Austenitic stainless steel
- SS-142715 - Tool steel - High speed steel - Cutting steel andcold work steel - SS steel 27 15
- SS-142716 - Tool steel - High speed steel - Cutting steel andcold work steel - SS steel 27 16
- SS-142722 - Tool steel - High speed steel - Cutting steel andcold work steel - SS steel 27 22
- SS-142723 - Tool steel - High speed steel - Cutting steel andcold work steel - SS steel 27 23
- SS-142725 - Tool steel - High speed steel - Cutting steel andcold work steel - SS steel 27 25
- SS-142726 - Tool steel - High speed steel - Cutting steel andcold work steel - SS steel 27 26
- SS-142727 - Tool steel - High speed steel - Cutting steel andcold work steel - SS steel 27 27
- SS-142737 - Tool steel - High speed steel - Cutting steel andcold work steel - SS steel 27 37
- SS-EN-10020 - Definition and classification of grades of steel
- SS-EN-10021 - General technical delivery conditions for steel products
- SS-EN-10027-1 - Designation systems for steels - Part 1: Steel names
- SS-EN-10027-2 - Designation systems for steels - Part 2: Numerical system
- SS-EN-10088-1 - Stainless steels - Part 1: List of stainless steels
- SS-EN-10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
- SS-EN-10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
- SS-EN-10168 - Steel products - Inspection documents - List of information and description
- SS-EN-10238 - Automatically blast-cleaned and automatically prefabrication primed structural steel products
- SS-EN-10373 - Determination of the physical and mechanical properties of steels using models
- SS-EN-12510 - Wood poles for overhead lines - Strength grading criteria
- SS-EN-29658 - Steel - Determination of aluminium content - Flame atomic absorption spectrometric method (ISO 9658:1990)
- SS-EN-ISO-10088-1 - Stainless steels - Part 1: List of stainless steels
- SS-EN-ISO-13900 - Steel - Determination of content - Curcumin spectrophotometric method after distillation (ISO 13900:1997)
- SS-EN-ISO-15349-2 - Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:2021)
- SS-EN-ISO-4945 - Steel - Determination of nitrogen - Spectrophotometric method (ISO 4945:2018)
- SS-EN-ISO-6306 - Chemical analysis of steel - Order of listing elements in steel standards (ISO 6306:2020)
- SS-ENV-13797 - Corrosion protection - Carbon and low alloy steels for use in hydrogen sulfide containing environments in oil and gas production - Materials and test methods - Guidelines
- SS-ISO-20915 - Life cycle inventory calculation methodology for steel products (ISO 20915:2018, IDT)
- UNE-EN-10027-2 - Designation systems for steels - Part 2: Numerical system