Document Center List of Standards on Copper And Copper Alloys
ICS Code 77.120.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-B135M - Standard Specification for Seamless Brass Tube [Metric] (Withdrawn 2017)
- ASTM-B154 - Standard Test Method for Mercurous Nitrate Test for Copper Alloys
- ASTM-B224 - Standard Classification of Coppers
- ASTM-B251M - Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric] (Withdrawn 2017)
- ASTM-B291 - Specification for Copper-Zinc-Manganese Alloy (Manganese Brass) Sheet and Strip (Withdrawn 1992)
- ASTM-B4 - Specification for Tough-Pitch Lake Copper-Refinery Shapes (Withdrawn 1980)
- ASTM-B453M - Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod [Metric] (Withdrawn 2001)
- ASTM-B492 - Specification for Cast Copper-Nickel Ship Tailshaft Sleeves (Withdrawn 1989)
- ASTM-B577 - Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
- ASTM-B585 - Specification for Seamless Copper-Alloy Water Tube (Withdrawn 1988)
- ASTM-B586 - Specification for Welded Copper-Alloy Water Tube (Withdrawn 1987)
- ASTM-B598 - Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys (Withdrawn 2019)
- ASTM-B694 - Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
- ASTM-B707M - Specification for Seamless Copper Water Tube (Special Use) (Metric) (Withdrawn 1991)
- ASTM-B846 - Standard Terminology for Copper and Copper Alloys
- ASTM-B858 - Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
- ASTM-B870 - Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
- ASTM-B900 - Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
- ASTM-D7095 - Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
- ASTM-E106 - Standard Test Methods for Chemical Analysis of Copper-Beryllium Alloys (Withdrawn 2011)
- ASTM-E118 - Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys (Withdrawn 2010)
- ASTM-E121 - Standard Test Methods for Chemical Analysis of Copper-Tellurium Alloys (Withdrawn 2010)
- ASTM-E1371 - Standard Test Method for Gravimetric Determination of Phosphorus in Phosphorus-Copper Alloys or Phosphorus-Copper-Silver Alloys (Withdrawn 2006)
- ASTM-E255 - Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition (Withdrawn 2023)
- ASTM-E2575 - Standard Test Method for Determination of Oxygen in Copper and Copper Alloys by Inert Gas Fusion
- ASTM-E2824 - Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetry
- ASTM-E478 - Standard Test Methods for Chemical Analysis of Copper Alloys
- ASTM-E53 - Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry (Withdrawn 2022)
- ASTM-E54 - Standard Test Methods for Chemical Analysis of Special Brasses and Bronzes (Withdrawn 2002)
- ASTM-E581 - Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys
- ASTM-E62 - Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
- ASTM-F2405 - Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
- ASTM-G188 - Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
- ASTM-G37 - Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys
BSI:
- BS-1748-6 - Methods for the analysis of copper alloys
- BS-1748-7 - Methods for the analysis of copper alloys
- BS-1748-8 - Methods for the analysis of copper alloys
- BS-1748-9 - Methods for the analysis of copper alloys
- BS-1748-S-11-&-12 - Methods for the analysis of copper alloys
- BS-1748-S-1-5 - Methods for the analysis of copper alloys
- BS-7317-1 - Methods for analysis of high purity copper cathode Cu-CATH-1
- BS-7317-2 - Methods for analysis of high purity copper cathode Cu-CATH-1
- BS-7317-3 - Methods for analysis of high purity copper cathode Cu-CATH-1
- BS-7317-4 - Methods for analysis of high purity copper cathode Cu-CATH-1
- BS-7317-5 - Methods for analysis of high purity copper cathode Cu-CATH-1
- BS-7317-6 - Methods for analysis of high purity copper cathode Cu-CATH-1
- BS-7317-7 - Methods for analysis of high purity copper cathode Cu-CATH-1
- BS-8537 - Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes
- BS-EN-1173 - Copper and copper alloys. Material condition designation
- BS-EN-12449 - Copper and copper alloys. Seamless, round tubes for general purposes
- BS-EN-12449-TC - Tracked Changes. Copper and copper alloys. Seamless, round tubes for general purposes
- BS-EN-12861 - Copper and copper alloys. Scrap
- BS-EN-12861-TC - Tracked Changes. Copper and copper alloys. Scrap
- BS-EN-12893 - Copper and copper alloys. Determination of spiral elongation number
- BS-EN-1412 - Copper and copper alloys. European numbering system
- BS-EN-1412-TC - Tracked Changes. Copper and copper alloys. European numbering system
- BS-EN-14935 - Copper and copper alloys. Determination of impurities in pure copper. ETA-AAS method
- BS-EN-14936-1 - Copper and copper alloys. Determination of aluminium content
- BS-EN-14936-2 - Copper and copper alloys. Determination of aluminium content
- BS-EN-14937-1 - Copper and copper alloys. Determination of antimony content
- BS-EN-14937-2 - Copper and copper alloys. Determination of antimony content
- BS-EN-14938-2 - Copper and copper alloys. Determination of bismuth content
- BS-EN-14939 - Copper and copper alloys. Determination of beryllium content. FAAS Method
- BS-EN-14940-2 - Copper and copper alloys. Determination of chromium content
- BS-EN-14941 - Copper and copper alloys. Determination of cobalt content. FAAS method
- BS-EN-14942-2 - Copper and copper alloys. Determination of arsenic content
- BS-EN-15022-3 - Copper and copper alloys. Determination of tin content
- BS-EN-15022-4 - Copper and copper alloys. Determination of tin content
- BS-EN-15023-3 - Copper and copper alloys. Determination of nickel content
- BS-EN-15024-2 - Copper and copper alloys. Determination of zinc content
- BS-EN-15025 - Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometric method (FAAS)
- BS-EN-1503-4 - Valves. Materials for bodies, bonnets and covers
- BS-EN-15063-1 - Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF)
- BS-EN-15063-2 - Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF)
- BS-EN-15079 - Copper and copper alloys. Analysis by spark optical emission spectrometry (S-OES)
- BS-EN-15079-TC - Tracked Changes. Copper and copper alloys. Analysis by spark optical emission spectrometry (S-OES)
- BS-EN-15605 - Copper and copper alloys. Inductively coupled plasma optical emission spectrometry
- BS-EN-15616 - Copper and copper alloys. Determination of cadmium content. Flame atomic absorption spectrometric method (FAAS)
- BS-EN-15622 - Copper and copper alloys. Determination of lead content. Flame atomic absorption spectrometric method (FAAS)
- BS-EN-15690-2 - Copper and copper alloys. Determination of iron content
- BS-EN-15703-2 - Copper and copper alloys. Determination of manganese content
- BS-EN-15915 - Copper and copper alloys. Determination of silver content. Flame atomic absorption spectrometric method (FAAS)
- BS-EN-15916-2 - Copper and copper alloys. Determination of tellurium content
- BS-EN-16090 - Copper and copper alloys. Estimation of average grain size by ultrasound
- BS-EN-16117-1 - Copper and copper alloys. Determination of copper content
- BS-EN-16117-2 - Copper and copper alloys. Determination of copper content
- BS-EN-1655 - Copper and copper alloys. Declarations of conformity
- BS-EN-1981 - Copper and copper alloys. Master alloys
- BS-ISO-4382-1 - Plain bearings. Copper alloys
- BS-ISO-4382-2 - Plain bearings. Copper alloys
- DD-CEN-13388 - Copper and copper alloys. Compendium of compositions and products
- DD-CEN-14938-2 - Copper and copper alloys. Determination of bismuth content
- DD-CEN-14940-1 - Copper and copper alloys. Determination of chromium content
- DD-CEN-15022-2 - Copper and copper alloys. Determination of tin content
- DD-CEN-15022-4 - Copper and copper alloys. Determination of tin content
- DD-CEN-15023-3 - Copper and copper alloys. Determination of nickel content
- DD-CEN-15025 - Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometry method (FAAS)
- DD-CEN-15616 - Copper and copper alloys. Determination of cadmium content. Flame atomic absorption spectrometric method (FAAS)
- DD-CEN-15656 - Copper and copper alloys. Determination of phosphorus content. Spectrophotometric method
- DD-CEN-15703-1 - Copper and copper alloys. Determination of manganese content
- PD-6619 - Copper and copper alloys. Provisions and procedures for the allocation of material numbers and registration of materials
- PD-6641 - Copper & Copper Alloys - Compendium of Compositions and Products
- PD-CEN-13388 - Copper and copper alloys. Compendium of compositions and products
- PD-CEN-15656 - Copper and copper alloys. Determination of phosphorus content. Spectrophotometric method
ISO:
- ISO-1190-1 - Copper and copper alloys - Code of designation - Part 1 : Designation of materials
- ISO-1190-2 - Copper and copper alloys -- Code of designation -- Part 2: Designation of tempers
- ISO-1553 - Unalloyed copper containing not less than 99,90 % of copper - Determination of copper content - Electrolytic method
- ISO-1554 - Wrought and cast copper alloys - Determination of copper content - Electrolytic method
- ISO-1810 - Copper alloys - Determination of nickel (low contents) - Dimethylglyoxime spectrophotometric method
- ISO-1811-1 - Copper and copper alloys - Selection and preparation of samples for chemical analysis - Part 1 : Sampling of cast unwrought products
- ISO-1811-2 - Copper and copper alloys - Selection and preparation of samples for chemical analysis - Part 2: Sampling of wrought products and castings
- ISO-1812 - Copper alloys - Determination of iron content - 1,10- Phenanthroline spectrophotometric method
- ISO-197-1 - Copper and copper alloys - Terms and definitions - Part 1 : Materials
- ISO-197-5 - Copper and copper alloys - Terms and definitions - Part 5 : Methods of processing and treatment
- ISO-2311 - Electrolytic cathode copper - Withdrawn, 12/1/1981
- ISO-2543 - Copper and copper alloys - Determination of manganese - Spectrophotometric method
- ISO-2624 - Copper and copper alloys - Estimation of average grain size
- ISO-3110 - Copper alloys - Determination of aluminium as alloying element - Volumetric method
- ISO-3111 - Copper alloys - Determination of tin as alloying element - Volumetric method
- ISO-3112 - Copper and copper alloys - Determination of lead - Extracting titration method
- ISO-3220 - Copper and copper alloys - Determination of arsenic - Photometric method
- ISO-4382-1 - Plain bearings - Copper alloys - Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings
- ISO-4382-2 - Plain bearings - Copper alloys - Part 2: Wrought copper alloys for solid plain bearings
- ISO-4740 - Copper and copper alloys - Determination of zinc content - Flame atomic absorption spectrometric method
- ISO-4741 - Copper and copper alloys - Determination of phosphorus content - Molybdovanadate spectrometric method
- ISO-4742 - Copper alloys - Determination of nickel content - Gravimetric method
- ISO-4743 - Copper alloys - Determination of nickel content - Titrimetric method
- ISO-4744 - Copper and copper alloys - Determination of chromium content - Flame atomic absorption spectrometric method
- ISO-4748 - Copper alloys - Determination of iron content - Na2EDTA titrimetric method
- ISO-4749 - Copper alloys - Determination of lead content - Flame atomic absorption spectrometric method
- ISO-4751 - Copper and copper alloys - Determination of tin content - Spectrometric method
- ISO-5956 - Copper and copper alloys - Determination of antimony content - Rhodamine B spectrometric method
- ISO-5959 - Copper and copper alloys - Determination of bismuth content - Diethyldithiocarbamate spectrometric method
- ISO-5960 - Copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method
- ISO-6437 - Copper alloys - Determination of chromium content - Titrimetric method
- ISO-7266 - Copper and copper alloys - Determination of sulfur content - Combustion titrimetric method
Other SDOs:
- DIN-EN-14935 - Copper & Copper Alloys - Determination of Impurities in Pure Copper - Et AAS Method
- DIN-EN-14936-1 - Part 1: Titrimetric Method, Copper & Copper Alloys - Determination of Aluminium Conten
- DIN-EN-14936-2 - Part 2: Faas Method, Copper & Copper Alloys - Determination of Aluminium Content
- DIN-EN-14937-1 - Part 1: Spectrophotometric Method, Copper & Copper Alloys - Determination & Antimony
- DIN-EN-14937-2 - Part 2: Faas Method, Copper & Copper Alloys - Determination of Antimony Content
- DIN-EN-14939 - Copper & Copper Alloys - Determination of Beryllium Content - Faas Method
- DIN-EN-14940-2 - Part 2: Faas Method, Copper & Copper Alloys - Determination of Chromium Content
- DIN-EN-14941 - Copper & Copper Alloys - Determination of Cobalt Content - Faas Method
- DIN-EN-14942-2 - Part 2: Faas Method, Copper & Copper Alloys - Determination of Arsenic Content
- DIN-EN-15022-3 - Part 3: Low Tin Content - Flame Atomic Absorption Spectrometry Method, Copper & Copper
- DIN-EN-15024-2 - Part 2: Flame Atomic Absorption Spectrometry Method (Faas), Copper & Copper Alloys -
- DIN-EN-1503-4 - Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards; German version EN 1503-4:2016
- DIN-EN-15063-1 - Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method; German version EN 15063-1:2014
- DIN-EN-15063-2 - Part 2: Routine Method, Copper & Cooper Alloys - Determination of Main Constituents &
- EN-1173 - Copper & Copper Alloys, Material Condition Designation
- EN-12449 - Copper and copper alloys - Seamless, round tubes for general purposes
- EN-12861 - Copper & Copper Alloys, Scrap
- EN-1412 - Copper and copper alloys - European numbering system
- EN-14935 - Copper & Copper Alloys - Determination of Impurities in Pure Copper - Et AAS Method
- EN-14936-1 - Part 1: Titrimetric Method, Copper & Copper Alloys - Determination of Aluminium Conten
- EN-14936-2 - Part 2: Faas Method, Copper & Copper Alloys - Determination of Aluminium Content
- EN-14937-1 - Part 1: Spectrophotometric Method, Copper & Copper Alloys - Determination of Antimony
- EN-14937-2 - Part 2: Faas Method, Copper & Copper Alloys - Determination of Antimony Content
- EN-14938-2 - Part 2: Flame Atomic Absorption Spectrometric Method (Faas), Copper & Copper Alloys -
- EN-14939 - Copper & Copper Alloys - Determination of Beryllium Content - Faas Method
- EN-14940-2 - Part 2: Faas Method, Copper & Copper Alloys - Determination of Chromium Content
- EN-14941 - Copper & Copper Alloys - Determination of Cobalt Content - Faas Method
- EN-14942-2 - Part 2: Faas Method, Copper & Copper Alloys - Determination of Arsenic Content
- EN-15022-3 - Part 3: Low Tin Content - Flame Atomic Absorption Spectrometry Method (Faas), Copper &
- EN-15022-4 - Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
- EN-15023-3 - Part 3: Flame Atomic Absorption Spectrometric Method (Faas), Copper & Copper Alloys -
- EN-15024-2 - Part 2: Flame Atomic Absorption Spectrometry Method (Faas), Copper & Copper Alloys -
- EN-15025 - Copper & Copper Alloys - Determination of Magnesium Content - Flame Atomic Absorption
- EN-1503-4 - Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards
- EN-15063-1 - Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method
- EN-15063-2 - Part 2: Routine Method, Copper & Copper Alloys - Determination of Main Constituents &
- EN-15079 - Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES)
- EN-15605 - Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
- EN-15616 - Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS)
- EN-15622 - Copper & Copper Alloys - Determination of Lead Content - Flame Atomic Absorption Spect
- EN-15690-2 - Part 2: Flame Atomic Absorption, Copper & Copper Alloys - Determination of Iron Conten
- EN-15703-2 - Copper and copper alloys - Determination of manganese content - Part 2: Flame atomic absorption spectrometric method (FAAS)
- EN-15915 - Copper & Copper Alloys - Determination of Silver Content - Flame Atomic Absorption SPE
- EN-15916-2 - Part 2: Medium Tellurium Content - Flame Atomic Absorption Spectrometric Method (Faas)
- EN-16090 - Copper and copper alloys - Estimation of average grain size by ultrasound
- EN-16117-1 - Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 %
- EN-16117-2 - Copper and copper alloys - Determination of copper content - Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 %
- EN-1655 - Copper & Copper Alloys - Declarations of Conformity
- EN-1981 - Copper & Copper Alloys, Master Alloys
- JIS-H-1292 - Methods for X-ray fluorescence spectrometric analysis of copper alloys
- JIS-H-1292-JAPANESE - JAPANESE LANGUAGE - Copper alloys - Methods for X-ray fluorescence spectrometric analysis
- JIS-H-2202 - Copper alloy ingots for castings
- SIS-CEN/TS-13388 - Copper and copper alloys - Compendium of compositions and products
- SIS-CEN/TS-14938-2 - Copper and copper alloys - Determination of bismuth content - Part 2: FAAS method
- SIS-CEN/TS-14940-1 - Copper and copper alloys - Determination of chromium content - Part 1: Titrimetric method
- SIS-CEN/TS-15022-4 - Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometry method (FAAS)
- SIS-CEN/TS-15023-3 - Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometry method (FAAS)
- SIS-CEN/TS-15025 - Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometry method (FAAS)
- SIS-CEN/TS-15605 - Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
- SIS-CEN/TS-15616 - Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS)
- SIS-CEN/TS-15656 - Copper and copper alloys - Determination of phosphorus content - Spectrophotometric method
- SIS-CEN/TS-15703-1 - Copper and copper alloys - Determination of manganese content - Part 1: Spectrophotometric method
- SS-EN-1172 - Copper and copper alloys - Sheet and strip for building purposes
- SS-EN-1173 - Copper and copper alloys - Material condition designation
- SS-EN-12449 - Copper and copper alloys - Seamless, round tubes for general purposes
- SS-EN-12450 - Copper and copper alloys - Seamless, round copper capillary tubes
- SS-EN-12451 - Copper and copper alloys - Seamless, round tubes for heat exchangers
- SS-EN-12452 - Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
- SS-EN-12893 - Copper and copper alloys - Determination of spiral elongation number
- SS-EN-1412 - Copper and copper alloys - European numbering system
- SS-EN-14935 - Copper and copper alloys - Determination of impurities in pure copper - ETA AAS method
- SS-EN-14936-1 - Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method
- SS-EN-14936-2 - Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method
- SS-EN-14937-1 - Copper and copper alloys - Determination of antimony content - Part 1: Spectrometric method
- SS-EN-14937-2 - Copper and copper alloys - Determination of antimony content - Part 2: FAAS method
- SS-EN-14938-2 - Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS)
- SS-EN-14939 - Copper and copper alloys - Determination of beryllium content - FAAS method
- SS-EN-14940-2 - Copper and copper alloys - Determination of chromium content - Part 2: FAAS method
- SS-EN-14941 - Copper and copper alloys - Determination of cobalt content - FAAS method
- SS-EN-14942-2 - Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method
- SS-EN-14977 - Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
- SS-EN-15022-3 - Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS)
- SS-EN-15022-4 - Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
- SS-EN-15023-3 - Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS)
- SS-EN-15024-2 - Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometric method (FAAS)
- SS-EN-15025 - Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS)
- SS-EN-1503-4 - Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards
- SS-EN-15063-1 - Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method
- SS-EN-15063-2 - Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method
- SS-EN-15079 - Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES)
- SS-EN-15605 - Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
- SS-EN-15616 - Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS)
- SS-EN-15622 - Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS)
- SS-EN-15690-2 - Copper and copper alloys - Determination of iron content - Part 2: Flame atomic absorption spectrometry method (FAAS)
- SS-EN-15703-2 - Copper and copper alloys - Determination of manganese content - Part 2: Flame atomic absorption spectrometric method (FAAS)
- SS-EN-15915 - Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS)
- SS-EN-15916-2 - Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS)
- SS-EN-16090 - Copper and copper alloys - Estimation of average grain size by ultrasound
- SS-EN-16117-1 - Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 %
- SS-EN-16117-2 - Copper and copper alloys - Determination of copper content - Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 %
- SS-EN-1652 - Copper and copper alloys - Plate, sheet, strip and circles for general purposes
- SS-EN-1653 - Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units
- SS-EN-1653-AM1 - Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units
- SS-EN-1655 - Copper and copper alloys - Declarations of conformity
- SS-EN-1976 - Copper and copper alloys - Cast unwrought copper products
- SS-EN-1977 - Copper and copper alloys - Copper drawing stock (wire rod)
- SS-EN-1978 - Copper and copper alloys - Copper cathodes
- SS-EN-1981 - Copper and copper alloys - Master alloys
- SS-EN-723 - Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings
- SS-EN-ISO-196 - Wrought copper and copper alloys - Detection of residual stress - Mercury(l) nitrate test (ISO 196:1978)
- SS-EN-ISO-2624 - Copper and copper alloys - Estimation of average grain size (ISO 2624:1990)
- SS-EN-ISO-2626 - Copper - Hydrogen embrittlement test (ISO 2626:1973)
- SS-ISO-4382-1 - Plain bearings - Copper alloys - Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings
- SS-ISO-4382-2 - Plain bearings - Copper alloys - Part 2: Wrought copper alloys for solid plain bearings
- SS-ISO-6957 - Copper alloys - Ammonia test for stress corrosionresistance