Document Center is acquired by Nimonik

Document Center List of Standards on Lead, Zinc, Tin And Their Alloys

ICS Code 77.120.60

Return to ICS Index.

Up to Level 2:

• 77.120 (Non-ferrous metals Including classification, designation, sampling, chemical analysis, etc. Precious metals for dentistry, see 11.060.10 Precious metals for jewellery, see 39.060 Dimensions and quality grades of non-ferrous metal products, see 77.150)

The following documents are a part of this series:

ASTM:

• ASTM-B339 - Standard Specification for Pig Tin
• ASTM-B560 - Standard Specification for Modern Pewter Alloys
• ASTM-B6 - Standard Specification for Zinc
• ASTM-B69 - Standard Specification for Rolled Zinc
• ASTM-B750 - Standard Specification for GALFAN
• ASTM-B793 - Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
• ASTM-B852 - Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
• ASTM-B860 - Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
• ASTM-B897 - Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot
• ASTM-B907 - Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
• ASTM-B960 - Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
• ASTM-B982 - Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
• ASTM-E1613 - Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)
• ASTM-E37 - Standard Test Methods for Chemical Analysis of Pig Lead (Withdrawn 2020)
• ASTM-E40 - Standard Test Method for Chemical Analysis of Slab Zinc (Spelter) (Withdrawn 1993)
• ASTM-E47 - Standard Test Methods for Chemical Analysis of Zinc Die-Casting Alloys (Withdrawn 1997)
• ASTM-E536 - Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
• ASTM-E634 - Standard Practice for Sampling of Zinc and Zinc Alloys for Analysis by Spark Atomic Emission Spectrometry

BSI:

• BS-3338-10 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-11 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-13 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-14 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-15 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-16 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-17 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-18 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-19 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-2 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-20 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-21 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-3 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-4 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-5 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-6 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-7 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-8 - Methods for the sampling and analysis of tin and tin alloys
• BS-3338-9 - Methods for the sampling and analysis of tin and tin alloys
• BS-3630-15 - Methods for the Sampling and Analysis of Zinc and Zinc Alloys, Magnesium in Zinc Alloys (a
• BS-3630-16 - Methods for the sampling and analysis of zinc and zinc alloys
• BS-3630-6 - Methods for the sampling and analysis of zinc and zinc alloys. Aluminium in zinc alloys (volumetric method)
• BS-3908-10 - Methods for the sampling and analysis of lead and lead alloys
• BS-3908-13 - Methods for the sampling and analysis of lead and lead alloys
• BS-3908-2 - Methods for the sampling and analysis of lead and lead alloys
• BS-3908-6 - Methods for the sampling and analysis of lead and lead alloys
• BS-3908-9 - Methods for the sampling and analysis of lead and lead alloys
• BS-EN-1179 - Zinc and zinc alloys. Primary zinc
• BS-EN-12019 - Zinc & Zinc Alloys - Optical Emission Spectrometric Analysis
• BS-EN-12402 - Lead and lead alloys. Methods of sampling for analysis
• BS-EN-12441-1 - Zinc and zinc alloys. Chemical analysis
• BS-EN-12441-10 - Zinc and zinc alloys. Chemical analysis
• BS-EN-12441-11 - Zinc and zinc alloys. Chemical analysis
• BS-EN-12441-2 - Zinc and zinc alloys. Chemical analysis
• BS-EN-12441-3 - Zinc and zinc alloys. Chemical analysis
• BS-EN-12441-4 - Zinc and zinc alloys. Chemical analysis
• BS-EN-12441-5 - Zinc and zinc alloys. Chemical analysis
• BS-EN-12441-6 - Zinc and zinc alloys. Chemical analysis
• BS-EN-12441-7 - Zinc and zinc alloys. Chemical analysis
• BS-EN-12441-8 - Zinc and zinc alloys. Chemical analysis
• BS-EN-12441-9 - Zinc and zinc alloys. Chemical analysis
• BS-EN-12659 - Lead and lead alloys. Lead
• BS-EN-12938 - Methods for the analysis of pewter. Determination of alloying and impurity element contents by atomic spectrometry
• BS-EN-13283 - Zinc and zinc alloys. Secondary zinc
• BS-EN-13615 - Methods for the analysis of ingot tin. Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
• BS-EN-14290 - Zinc and zinc alloys. Secondary raw material
• BS-EN-1774 - Zinc and zinc alloys. Alloys for foundry purposes. Ingot and liquid
• BS-EN-ISO-3815-1 - Zinc and zinc alloys
• BS-EN-ISO-3815-2 - Zinc and zinc alloys
• BS-ISO-4381 - Plain bearings. Tin casting alloys for multilayer plain bearings
• DD-ENV-13800 - Lead and lead alloys. Analysis by flame atomic absorption spectromerty (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
• DD-ENV-14029 - Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
• DD-ENV-14138 - Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emissions spectrometry (ICP-ES), after separation by co-precipitation

ISO:

• ISO-1053 - Zinc - Determination of copper content - Spectrophotometric method
• ISO-1054 - Zinc - Determination of cadmium content - Polarographic method
• ISO-1055 - Zinc and zinc alloys - Determination of iron content - Spectrophotometric method
• ISO-1169 - Zinc alloys - Determination of aluminium content - Titrimetric method
• ISO-15201 - Zinc and zinc alloys - Castings - Specifications
• ISO-1570 - Zinc and zinc alloys - Determination of tin content - Spectrophotometric method
• ISO-1976 - Zinc alloys - Determination of copper content - Electrolytic method
• ISO-20081 - Zinc and zinc alloys - Method of sampling - Specifications
• ISO-2576 - Chemical analysis of zinc alloys - Polarographic determination of lead and cadmium in zinc alloys containing copper
• ISO-2741 - Zinc alloys - Complexometric determination of magnesium
• ISO-301 - Zinc alloy ingots intended for castings
• ISO-3750 - Zinc alloys - Determination of magnesium content - Flame atomic absorption spectrometric method
• ISO-3751 - Zinc ingots - Selection and preparation of samples for chemical analysis
• ISO-3752 - Zinc alloy ingots - Selection and preparation of samples for chemical analysis
• ISO-3815 - Zinc and zinc alloys - Spectrographic analysis
• ISO-3815-1 - Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry
• ISO-3815-2 - Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry
• ISO-3816 - Zinc ingots - Selection and preparation of samples for spectrographic analysis
• ISO-3817 - Zinc alloy ingots - Selection and preparation of samples for spectrographic analysis
• ISO-4381 - Plain bearings - Tin casting alloys for multilayer plain bearings
• ISO-713 - Zinc - Determination of lead and cadmium contents - Polarographic method
• ISO-714 - Zinc - Determination of iron content - Photometric method
• ISO-715 - Zinc - Determination of lead content - Polarographic method
• ISO-752 - Zinc ingots

Other SDOs:

• DIN-17640-1 - Lead alloys for general purposes
• DIN-EN-12441-1 - Part 1: Determination of Aluminium in Zinc Alloys - Titrimetric Method, Zinc & Zinc Al
• DIN-EN-12441-10 - Part 10: Determination of Chromium & Titanium in Zinc Alloys - Spectrophotometric Meth
• DIN-EN-12441-11 - Part 11: Determination of Silicon in Zinc Alloys - Spectrophotometric Method, Zinc & Z
• DIN-EN-12441-2 - Part 2: Determination of Magnesium in Zinc Alloys - Flame Atomic Absorption Spectromet
• DIN-EN-12441-7 - Part 7: Determination of Tin - Flame Atomic Absorption Spectrometric Method After Extr
• DIN-EN-12441-8 - Part 8: Determination of Tin in Secondary Zinc - Flame Atomic Absorption Spectrometric
• DIN-EN-12441-9 - Part 9: Determination of Nickel in Zinc Alloys - Flame Atomic Absorption Spectrometric
• DIN-EN-14290 - Zinc & Zinc Alloys, Secondary Raw Materials
• DIN-EN-ISO-3815-1 - Part 1: Analysis of Solid Samples by Optical Emission Spectrometry, Zinc & Zinc Alloys
• DIN-EN-ISO-3815-2 - Part 2: Analysis by Inductively Coupled Plasma Optical Emission Spectrometry, Zinc & Z
• EN-12441-1 - Part 1: Determination of Aluminium in Zinc Alloys - Titrimetric Method, Zinc & Zinc Al
• EN-12441-10 - Part 10: Determination of Chromium & Titanium in Zinc Alloys - Spectrophotometric Meth
• EN-12441-11 - Part 11: Determination of Silicon in Zinc Alloys - Spectrophotometric Method, Zinc & Z
• EN-12441-2 - Part 2: Determination of Magnesium in Zinc Alloys - Flame Atomic Absorption Spectromet
• EN-12441-7 - Part 7: Determination of Tin - Flame Atomic Absorption Spectrometric Method After Extr
• EN-12441-8 - Part 8: Determination of Tin in Secondary Zinc - Flame Atomic Absorption Spectrometric
• EN-12441-9 - Part 9: Determination of Nickel in Zinc Alloys - Flame Atomic Absorption Spectrometric
• EN-14290 - Zinc & Zinc Alloys, Secondary Raw Materials
• EN-1774 - Zinc & Zinc Alloys - Alloys for Foundry Purposes, Ingot & Liquid
• EN-ISO-3815-1 - Part 1: Analysis of Solid Samples by Optical Emission Spectrometry, Zinc & Zinc Alloys
• EN-ISO-3815-2 - Part 2: Analysis by Inductively Coupled Plasma Optical Emission Spectrometry, Zinc & Z
• JIS-H-2107 - Zinc ingots
• JIS-H-2201 - Zinc alloy ingots for die casting
• JIS-H-8619 - Electroplated coatings of tin
• JIS-H-8624 - Electroplated coatings of Tin-Lead alloys
• SIS-155105 - Petroleum products - Liquid hydrocarbons - Automatic pipeline sampling
• SS-EN-1179 - Zinc and zinc alloys - Primary zinc
• SS-EN-12019 - Zinc and zinc alloys - Optical emission spectrometric analysis
• SS-EN-12060 - Zinc and zinc alloys - Method of sampling - Specifications
• SS-EN-12402 - Lead and lead alloys - Methods of sampling for analysis
• SS-EN-12441-1 - Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys - Titrimetric method
• SS-EN-12441-10 - Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method
• SS-EN-12441-11 - Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method
• SS-EN-12441-1-AM1 - Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys - Titrimetric method
• SS-EN-12441-2 - Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method
• SS-EN-12441-2-AM1 - Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method
• SS-EN-12441-2-AM2 - Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method
• SS-EN-12441-3 - Zinc and zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper - Flame atomic absorption spectrometric method
• SS-EN-12441-4 - Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys - Spectrophotometric method
• SS-EN-12441-5 - Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc - Spectrophotometric method
• SS-EN-12441-6 - Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron - Flame atomic absorption spectrometric method
• SS-EN-12441-7 - Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction
• SS-EN-12441-8 - Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method
• SS-EN-12441-9 - Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method
• SS-EN-12588 - Lead and lead alloys - Rolled lead sheet for building purposes
• SS-EN-12659 - Lead och lead alloys - Lead
• SS-EN-12844 - Zinc and zinz alloys - Castings - Specifications
• SS-EN-12938 - Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
• SS-EN-13283 - Zinc and zinc alloys - Secondary zinc
• SS-EN-14290 - Zinc and zinc alloys - Secondary raw material
• SS-EN-1559-6 - Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings
• SS-EN-1774 - Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid
• SS-EN-610 - Tin and tin alloys - Ingot tin
• SS-EN-611-1 - Tin and tin alloys - Pewter and pewterware - Part1: Pewter
• SS-EN-611-2 - Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware
• SS-EN-988 - Zinc and zinc alloys - Specifications for rolled flat products for building
• SS-EN-ISO-3815-1 - Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry (ISO 3815-1:2005)
• SS-EN-ISO-3815-2 - Zinc and zinc alloys - Part 2: Inductively coupled plasma optical emission spectometric analysis (ISO 3815-2:2005)
• SS-ENV-13800 - Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
• SS-ENV-14029 - Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
• SS-ISO-4381 - Plain bearings - Lead and tin casting alloys for multilayer plain bearings (ISO 4381:2000, IDT)
• SS-ISO-4520 - Chromate conversion coatings on electroplated zinc and cadmium coatings