Document Center List of Standards on Heat-Treatable Steels
ICS Code 77.140.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A143 - Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
- ASTM-A242 - Standard Specification for High-Strength Low-Alloy Structural Steel
- ASTM-A295 - Standard Specification for High-Carbon Anti-Friction Bearing Steel
- ASTM-A36 - Standard Specification for Carbon Structural Steel
- ASTM-A529 - Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- ASTM-A534 - Standard Specification for Carburizing Steels for Anti-Friction Bearings
- ASTM-A535 - Specification for Special-Quality Ball and Roller Bearing Steel (Withdrawn 1998)
- ASTM-A572 - Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
- ASTM-A588 - Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
- ASTM-A600 - Standard Specification for Tool Steel High Speed
- ASTM-A633 - Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
- ASTM-A649 - Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
- ASTM-A673 - Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
- ASTM-A681 - Standard Specification for Tool Steels Alloy
- ASTM-A685 - Specification for Machined Flat and Square Tool Steel Bars (Withdrawn 1985)
- ASTM-A686 - Standard Specification for Tool Steel, Carbon
- ASTM-A709 - Standard Specification for Structural Steel for Bridges
- ASTM-A808 - Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness (Withdrawn 2005)
- ASTM-A866 - Standard Specification for Medium Carbon Anti-Friction Bearing Steel
- ASTM-D5339 - Standard Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway Structures (Withdrawn 2005)
- ASTM-E1271 - Standard Practice for Qualifying Charpy Verification Specimens of Heat-Treated Steel (Withdrawn 2003)
BSI:
- BS-EN-10025-3-TC - Tracked Changes. Hot rolled products of structural steels
- BS-EN-10025-4-TC - Tracked Changes. Hot rolled products of structural steels
- BS-EN-10025-5-TC - Tracked Changes. Hot rolled products of structural steels
- BS-EN-10025-6-TC - Tracked Changes. Hot rolled products of structural steels
- BS-EN-10083-1 - Steels for quenching and tempering. General technical delivery conditions
- BS-EN-10083-2 - Steels for quenching and tempering
- BS-EN-10083-3 - Steels for quenching and tempering. Technical delivery conditions for alloy steels
- BS-EN-10084 - Case hardening steels. Technical delivery conditions
- BS-EN-10085 - Nitriding steel. Technical delivery conditions
- BS-EN-10113-1 - Part 1: General Delivery Conditions, Hot-Rolled Products Inweldable Fine Grain Structural
- BS-EN-10113-2 - Part 2: Delivery Conditions for Normalized/Normalized Rolledsteels, Hot-Rolled Products
- BS-EN-10113-3 - Part 3: Delivery Conditions for Thermomechancial Rolled Steels, Hot-Rolled Products in Wel
- BS-EN-10132 - Cold rolled narrow steel strip for heat treatment. Technical delivery conditions
- BS-EN-10132-1 - Cold rolled narrow steel strip for heat treatment. Technical delivery conditions
- BS-EN-10132-2 - Cold rolled narrow steel strip for heat treatment. Technical delivery conditions
- BS-EN-10132-3 - Cold rolled narrow steel strip for heat treatment. Technical delivery conditions
- BS-EN-10155 - Structural Steels With Improved Atmospheric Corrosion Resistance, Technical Delivery C
- BS-EN-10225 - Weldable structural steels for fixed offshore structures. Technical delivery conditions
- BS-EN-10225-3 - Weldable structural steels for fixed offshore structures. Technical delivery conditions
- BS-EN-10238 - Automatically blast-cleaned and automatically prefabrication primed structural steel products
- BS-EN-10277 - Bright steel products. Technical delivery conditions
- BS-EN-10277-3 - Bright steel products. Technical delivery conditions. Free-cutting steels
- BS-EN-10326 - Continuously hot-dip coated strip and sheet of structural steels. Technical delivery conditions
- BS-EN-10343 - Steels for quenching and tempering for construction purposes. Technical delivery conditions
- BS-EN-ISO-683-1 - Heat-treatable steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-17 - Heat-treated steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-17-TC - Tracked Changes. Heat-treated steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-2 - Heat-treatable steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-3 - Heat-treatable steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-3-TC - Tracked Changes. Heat-treatable steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-4 - Heat-treatable steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-5 - Heat treatable steels, alloy steels and free-cutting steels
- BS-EN-ISO-9443 - Surface quality classes for hot-rolled bars and wire rod
- BS-ISO-23825 - Method for evaluating the nodularity of spheroidal carbides. Steels for cold heading and cold extruding
- BS-ISO-4954 - Steels for cold heading and cold extruding
- BS-ISO-683-5 - Heat treatable steels, alloy steels and free-cutting steels
- BS-ISO-683-6 - Heat-treatable steels, alloy steels and free-cutting steels
- BS-ISO-683-7 - Heat-treatable steels, alloy steels and free-cutting steels
- DD-CEN-10347 - Guidance for forming of structural steels in processing
- DD-ENV-1090-3 - Execution of steel structures
ISO:
- ISO-11692 - Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures
- ISO-23825 - Method for evaluating the nodularity of spheroidal carbides - Steels for cold heading and cold extruding
- ISO-4954 - Steels for cold heading and cold extruding
- ISO-5949 - Tool steels and bearing steels - Micrographic method for assessing the distribution of carbides using reference photomicrographs
- ISO-683-1 - Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering
- ISO-683-10 - Heat-treatable steels, alloy steels and free-cutting steels - Part 10 : Wrought nitriding steels
- ISO-683-11 - Heat-treatable steels, alloy steels and free-cutting steels - Part 11: Case-hardening steels
- ISO-683-13 - Heat-treatable steels, alloy steels and free-cutting steels -- Part 13: Wrought stainless steels
- ISO-683-15 - Heat-treatable steels, alloy steels and free-cutting steels - Part 15: Valve steels for internal combustion engines
- ISO-683-16 - Heat-treated steels, alloy steels and free-cutting steels -- Part 16: Precipitation hardening stainless steels
- ISO-683-17 - Heat-treatable steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels
- ISO-683-18 - Heat-treatable steels, alloy steels and free-cutting steels - Part 18: Bright steel products
- ISO-683-2 - Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering
- ISO-683-3 - Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels
- ISO-683-4 - Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels
- ISO-683-5 - Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels
- ISO-683-6 - Heat-treatable steels, alloy steels and free-cutting steels - Part 6: Hot-rolled steels for quenched and tempered springs
- ISO-683-7 - Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels
- ISO-683-8 - Heat-treated steels, alloy steels and free-cutting steels -- Part 8: Wrought quenched and tempered chromium-nickel-molybdenum steels
- ISO-683-9 - Heat-treatable steels, alloy steels and free-cutting steels - Part 9 : Wrought free-cutting steels
- ISO-9443 - Surface quality classes for hot-rolled bars and wire rod
Other SDOs:
- DIN-EN-10025-1 - Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004
- DIN-EN-10025-2 - Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels; German version EN 10025-2:2004
- DIN-EN-10025-3 - Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels; German version EN 10025-3:2004
- DIN-EN-10025-4 - Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels; German version EN 10025-4:2004
- DIN-EN-10025-5 - Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance; German version EN 10025-5:2004
- DIN-EN-10025-6 - Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
- DIN-EN-10083-1 - Steels for quenching and tempering - Part 1: General technical delivery conditions; German version EN 10083-1:2006
- DIN-EN-10083-3 - Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels; German version EN 10083-3:2006
- DIN-EN-10326 - Continuously Hot-Dip Coated Strip & Sheet of Structural Steels, Technical Delivery Con
- EN-10025-1 - Part 1: General Technical Delivery Conditions, Hot Rolled Products of Structural Steel
- EN-10025-2 - Part 2: Technical Delivery Conditions for Non-Alloy Structural Steels, Hot Rolled Prod
- EN-10025-3 - Part 3: Technical Delivery Conditions for Normalized/Normalized Rolled Weldable Fine G
- EN-10025-4 - Part 4: Technical Delivery Conditions for Thermomechanically Rolled Weldable Fine Grai
- EN-10025-5 - Part 5: Technical Delivery Conditions for Structural Steels With Improved Atmospheric
- EN-10025-6 - Part 6: Technical Delivery Conditions for Flat Products of High Yield Strength Structu
- EN-10083-1 - Part 1: General Technical Delivery Conditions, Steels for Quenching & Tempering
- EN-10083-2 - Part 2: Technical Delivery Conditions for Non Alloy Steels, Steels for Quenching & Te
- EN-10083-3 - Part 3: Technical Delivery Conditions for Alloy Steels, Steels for Quenching & Temperi
- EN-10084 - Case Hardening Steels, Technical Delivery Conditions
- EN-10085 - Nitriding Steels - Technical Delivery Conditions
- EN-10225 - Weldable Structural Steels for Fixed Offshore Structures - Technical Delivery Conditio
- EN-10225-1 - Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 1: Plates
- EN-10225-2 - Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 2: Sections
- EN-10225-3 - Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 3: Hot finished hollow sections
- EN-10225-4 - Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections
- EN-10238 - Automatically Blast-Cleaned & Automatically Prefabrication Primed Structural Steel Pro
- EN-10277 - Bright steel products - Technical delivery conditions
- EN-10277-3 - Part 3: Free-Cutting Steels, Bright Steel Products - Technical Delivery Conditions
- EN-10326 - Continuously Hot-Dip Coated Strip & Sheet of Structural Steels, Technical Delivery Con
- EN-10351 - Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
- EN-ISO-683-17 - Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels
- EN-ISO-683-2 - Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering
- EN-ISO-683-3 - Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels
- EN-ISO-683-4 - Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels
- EN-ISO-9443 - Surface quality classes for hot-rolled bars and wire rod
- JIS-G-0320 - Standard test method for heat analysis of steel products
- JIS-G-0601 - Testing methods for clad steels
- JIS-G-3457 - Arc welded carbon steel pipes
- JIS-G-3509-1 - Low-alloyed steels for cold heading -- Part 1: Wire rods
- JIS-G-3509-2 - Low-alloyed steels for cold heading -- Part 2: Wires
- JIS-G-4051 - Carbon steels for machine structural use
- JIS-G-4052 - Structural steels with specified hardenability bands
- JIS-G-4053 - Low-alloyed steels for machine structural use
- JIS-G-4053-AM1 - Low-alloyed steels for machine structural use (Amendment 1) (Foreign Standard)
- JIS-G-4311 - Heat-resisting steel bars and wire rods
- JIS-G-4312 - Heat-resisting steel plate, sheet and strip
- SIS-CEN/TR-10347 - Guidance for forming of structural steels in processing
- SS-EN-10025-1 - Hot rolled products of structural steels - Part 1: General technical delivery conditions
- SS-EN-10025-2 - Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
- SS-EN-10025-3 - Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
- SS-EN-10025-4 - Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
- SS-EN-10025-5 - Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
- SS-EN-10025-6 - Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
- SS-EN-10083-1 - Steels for quenching and tempering - Part 1: General technical delivery conditions
- SS-EN-10083-2 - Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloys steels
- SS-EN-10083-3 - Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels
- SS-EN-10084 - Case hardening steels - Technical delivery conditions
- SS-EN-10085 - Nitriding steels - Technical delivery conditions
- SS-EN-10090 - Valve steels and alloys for internal combustion engines
- SS-EN-10095 - Heat resisting steels and nickel alloys
- SS-EN-10113-1 - Hot-rolled products in weldable fine grain structural steels - Part 1: General delivery conditions
- SS-EN-10132 - Cold rolled narrow steel strip for heat treatment - Technical delivery conditions
- SS-EN-10132-1 - Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General
- SS-EN-10132-2 - Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels
- SS-EN-10132-3 - Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering
- SS-EN-10132-4 - Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 4: Spring steels and other applications
- SS-EN-10137-1 - Plates and wide flats made of high yield strengthstructural steels in the quenched and tempered orprecipitation hardened conditions - Part 1: General delivery conditions
- SS-EN-10137-2 - Plates and wide flats made of high yield strengthstructural steels in the quenched and tempered orprecipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels
- SS-EN-10137-3 - Plates and wide flats made of high yield strengthstructural steels in the quenched and tempered orprecipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels
- SS-EN-10149-1 - Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
- SS-EN-10149-2 - Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels
- SS-EN-10149-3 - Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels
- SS-EN-10213 - Steel castings for pressure purposes
- SS-EN-10213-1 - Technical delivery conditions for steel castings for pressure purposes - Part 1: General
- SS-EN-10213-2 - Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures
- SS-EN-10213-3 - Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures
- SS-EN-10213-4 - Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades
- SS-EN-10225 - Weldable structural steels for fixed offshore structures - Technical delivery conditions
- SS-EN-10225-1 - Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 1: Plates
- SS-EN-10225-2 - Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 2: Sections
- SS-EN-10225-3 - Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 3: Hot finished hollow sections
- SS-EN-10225-4 - Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections
- SS-EN-10238 - Automatically blast-cleaned and automatically prefabrication primed structural steel products
- SS-EN-10267 - Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
- SS-EN-10277 - Bright steel products - Technical delivery conditions
- SS-EN-10277-1 - Bright steel products - Technical delivery conditions - Part 1: General
- SS-EN-10277-2 - Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
- SS-EN-10277-3 - Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels
- SS-EN-10277-4 - Bright steel products - Technical delivery conditions - Part 4: Case hardening steels
- SS-EN-10277-5 - Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering
- SS-EN-10327 - Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions
- SS-EN-10343 - Steels for quenching and tempering for construction purposes - Technical delivery conditions
- SS-EN-10351 - Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
- SS-EN-13445 - Unfired pressure vessels
- SS-EN-1634-1 - Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
- SS-EN-622-2 - Fibreboards - Specifications - Part 2: Requirements for hardboards
- SS-EN-ISO-10083-1 - Steels for quenching and tempering - Part 1: General technical delivery conditions
- SS-EN-ISO-10084 - Case hardening steels - Technical delivery conditions
- SS-EN-ISO-10085 - Nitriding steels - Technical delivery conditions
- SS-EN-ISO-10095 - Heat resisting steels and nickel alloys
- SS-EN-ISO-11562 - Geometrical product specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters (ISO 11562:1996/Cor 1:1998)
- SS-EN-ISO-18265 - Metallic materials - Conversion of hardness values (ISO 18265:2013)
- SS-EN-ISO-683-1 - Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016)
- SS-EN-ISO-683-17 - Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2023)
- SS-EN-ISO-683-2 - Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering (ISO 683-2:2016)
- SS-EN-ISO-683-3 - Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels (ISO 683-3:2022)
- SS-EN-ISO-683-4 - Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels (ISO 683-4:2016)
- SS-EN-ISO-683-5 - Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels (ISO 683-5:2017)
- SS-EN-ISO-6892-2 - Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018)
- SS-EN-ISO-9443 - Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018)
- SS-ISO-4384-1 - Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials (ISO 4384-1:2000, IDT)