Document Center List of Standards on Steel Bars And Rods
ICS Code 77.140.60
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1069 - Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes
- ASTM-A108 - Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
- ASTM-A276 - Standard Specification for Stainless Steel Bars and Shapes
- ASTM-A29 - Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
- ASTM-A304 - Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
- ASTM-A311 - Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
- ASTM-A314 - Standard Specification for Stainless Steel Billets and Bars for Forging
- ASTM-A321 - Standard Specification for Steel Bars, Carbon, Quenched and Tempered
- ASTM-A322 - Standard Specification for Steel Bars, Alloy, Standard Grades
- ASTM-A331 - Standard Specification for Steel Bars, Alloy, Cold-Finished (Withdrawn 2004)
- ASTM-A355 - Standard Specification for Steel Bars, Alloys, for Nitriding
- ASTM-A400 - Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
- ASTM-A427 - Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction (Withdrawn 2018)
- ASTM-A434 - Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
- ASTM-A49 - Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
- ASTM-A499 - Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
- ASTM-A561 - Standard Practice for Macroetch Testing of Tool Steel Bars
- ASTM-A564 - Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
- ASTM-A565 - Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
- ASTM-A575 - Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
- ASTM-A576 - Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
- ASTM-A582 - Standard Specification for Free-Machining Stainless Steel Bars
- ASTM-A6 - Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
- ASTM-A604 - Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
- ASTM-A627 - Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
- ASTM-A629 - Standard Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications (Withdrawn 2004)
- ASTM-A638 - Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
- ASTM-A663 - Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
- ASTM-A675 - Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
- ASTM-A695 - Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications (Withdrawn 2002)
- ASTM-A696 - Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
- ASTM-A759 - Standard Specification for Carbon Steel Crane Rails
- ASTM-A914 - Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
- ASTM-A950 - Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
- ASTM-A955 - Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
- ASTM-B351 - Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
- ASTM-B371 - Standard Specification for Copper-Zinc-Silicon Alloy Rod
- ASTM-B639 - Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
- ASTM-B691 - Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Rod, Bar, and Wire
- ASTM-D3963 - Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
BSI:
- BS-1506 - Specification for Carbon, Low Alloy & Stainless Steel Bars Billets for Bolting Materia
- BS-2901-1 - Filler Rods & Wires for Gas-Shielded Arc Welding, Ferritic Steels
- BS-4461 - Specification for cold worked steel bars for the reinforcement of concrete
- BS-4956 - Specification for Dimensions & Tolerances of Hot Rolled Round Steel Rods for Wire Draw
- BS-970-3 - Specification for Wrought Steels for Mechanical & Allied Engineering Purposes, Bright
- BS-EN-10016-1 - Non-alloy steel rods for drawing and/or cold rolling
- BS-EN-10016-2 - Non-alloy steel rods for drawing and/or cold rolling
- BS-EN-10016-3 - Non-alloy steel rods for drawing and/or cold rolling
- BS-EN-10016-4 - Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rod for special applications
- BS-EN-10058 - Hot rolled flat steel bars and steel wide flats for general purposes. Dimensions and tolerances on shape and dimensions
- BS-EN-10058-TC - Tracked Changes. Hot rolled flat steel bars and steel wide flats for general purposes. Dimensions and tolerances on shape and dimensions
- BS-EN-10059 - Hot rolled square steel bars for general purposes. Dimensions and tolerances on shape and dimensions
- BS-EN-10060 - Hot rolled round steel bars for general purposes. Dimensions and tolerances on shape and dimensions
- BS-EN-10061 - Hot rolled hexagon steel bars for general purposes. Dimensions and tolerances on shape and dimensions
- BS-EN-10067 - Hot rolled bulb flats. Dimensions and tolerances on shape, dimensions and mass
- BS-EN-10080 - Steel for the reinforcement of concrete. Weldable reinforcing steel. General
- BS-EN-10087 - Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods
- BS-EN-10088-5 - Stainless steels
- BS-EN-10092-1 - Hot rolled spring steel flat bars
- BS-EN-10163-3 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections
- BS-EN-10221 - Specification for surface quality classes for hot-rolled bars and rods. Technical delivery conditions
- BS-EN-10263-1 - Steel rod, bars and wire for cold heading and cold extrusion
- BS-EN-10263-1-TC - Tracked Changes. Steel rod, bars and wire for cold heading and cold extrusion
- BS-EN-10263-2 - Steel rod, bars and wire for cold heading and cold extrusion
- BS-EN-10263-2-TC - Tracked Changes. Steel rod, bars and wire for cold heading and cold extrusion
- BS-EN-10263-3 - Steel rod, bars and wire for cold heading and cold extrusion
- BS-EN-10263-3-TC - Tracked Changes. Steel rod, bars and wire for cold heading and cold extrusion
- BS-EN-10263-4 - Steel rod, bars and wire for cold heading and cold extrusion
- BS-EN-10263-4-TC - Tracked Changes. Steel rod, bars and wire for cold heading and cold extrusion
- BS-EN-10263-5 - Steel rod, bars and wire for cold heading and cold extrusion
- BS-EN-10263-5-TC - Tracked Changes. Steel rod, bars and wire for cold heading and cold extrusion
- BS-EN-10272 - Stainless steel bars for pressure purposes
- BS-EN-10273 - Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
- BS-EN-10273-TC - Tracked Changes. Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
- BS-EN-10277 - Bright steel products. Technical delivery conditions
- BS-EN-10277-1 - Bright steel products. Technical delivery conditions. General
- BS-EN-10277-2 - Bright steel products. Technical delivery conditions
- BS-EN-10277-3 - Bright steel products. Technical delivery conditions. Free-cutting steels
- BS-EN-10277-4 - Bright steel products. Technical delivery conditions. Case hardening steels
- BS-EN-10277-5 - Bright steel products. Technical delivery conditions. Steels for quenching and tempering
- BS-EN-10278-TC - Tracked Changes. Dimensions and tolerances of bright steel products of stainless and other special steels
- BS-EN-ISO-16120-1 - Non-alloy steel wire rod for conversion to wire
- BS-EN-ISO-16120-2 - Non-alloy steel wire rod for conversion to wire
- BS-EN-ISO-16120-4 - Non-alloy steel wire rod for conversion to wire
- BS-EN-ISO-16120-4-TC - Tracked Changes. Non-alloy steel wire rod for conversion to wire
- BS-EN-ISO-9443 - Surface quality classes for hot-rolled bars and wire rod
- BS-ISO-6819 - Steel wire rod for bridge cable wire
ISO:
- ISO-1035-1 - Hot-rolled steel bars - Part 1 : Dimensions of round bars
- ISO-1035-2 - Hot-rolled steel bars - Part 2 : Dimensions of square bars
- ISO-1035-3 - Hot-rolled steel bars - Part 3 : Dimensions of flat bars
- ISO-1035-4 - Hot-rolled steel bars - Part 4 : Tolerances
- ISO-16120-1 - Non-alloy steel wire rod for conversion to wire - Part 1: General requirements
- ISO-16120-2 - Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod
- ISO-16120-3 - Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod
- ISO-16120-4 - Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications
- ISO-20723 - Structural steels - Surface condition of hot-rolled sections - Delivery requirements
- ISO-2938 - Hollow steel bars for machining
- ISO-4951-1 - High yield strength steel bars and sections -- Part 1: General delivery requirements
- ISO-4951-2 - High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels
- ISO-4951-3 - High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanically-rolled steels
- ISO-630 - Structural Steels - Plates, Wide Flats, Bars, Sections & Profiles
- ISO-722 - Rock drilling equipment - Hollow drill steels in bar form, hexagonal and round
- ISO-9443 - Surface quality classes for hot-rolled bars and wire rod
Other SDOs:
- DIN-EN-10016-1 - Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements; German version EN 10016-1:1994
- DIN-EN-10016-2 - Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purpose rod; German version EN 10016-2:1994
- DIN-EN-10016-3 - Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod; German version EN 10016-3:1994
- DIN-EN-10016-4 - Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications; German version EN 10016-4:1994
- DIN-EN-10080 - Steel for the reinforcement of concrete - Weldable reinforcing steel - General; German version EN 10080:2005
- DIN-EN-ISO-15630-1 - Part 1: Reinforcing Bars, Wire Rod & Wire, Steel for the Reinforcement & Prestressing
- DIN-EN-ISO-15630-3 - Part 3: Prestressing Steel, Steel for the Reinforcement & Prestressing of Concrete - T
- DIN-EN-ISO-9445 - Continuously Cold-Rolled Stainless Steel Narrow Strip, Wide Strip, Plate/Sheet & Cut
- EN-10058 - Hot Rolled Flat Steel Bars for General Purposes, Dimensions & Tolerances on Shape & D
- EN-10059 - Hot Rolled Square Steel Bars for General Purposes, Dimensions & Tolerances on Shape &
- EN-10060 - Hot Rolled Round Steel Bars, Dimensions & Tolerances on Shape & Dimensions
- EN-10061 - Hot Rolled Hexagon Steel Bars, Dimensions & Tolerances on Shape & Dimensions
- EN-10067 - Hot Rolled Bulb Flats, Determination & Tolerances on Shape, Dimensions & Mass
- EN-10080 - Steel for the Reinforcement of Concrete, Weldable Reinforcing Steel - General
- EN-10088-5 - Part 5: Technical Delivery Conditions for Bars, Rods, Wire, Sections and Bright Product
- EN-10092-1 - Part 1: Flat Bars - Dimensions & Tolerances on Shape & Dimensions, Hot Rolled Spring S
- EN-10092-2 - Part 2: Ribbed & Grooved Spring Leaves - Dimensions & Tolerances on Shape & Dimensions
- EN-10163-3 - Part 3: Sections, Delivery Requirements for Surface Condition of Hot Rolled Steel Plat
- EN-10221 - Surface Quality Classes for Hot Rolled Steel Bars & Rod, Technical Delivery Conditions
- EN-10263-1 - Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
- EN-10263-2 - Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working
- EN-10263-3 - Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
- EN-10272 - Stainless steel bars for pressure purposes
- EN-10273 - Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
- EN-10277 - Bright steel products - Technical delivery conditions
- EN-10277-1 - Part 1: General, Bright Steel Products - Technical Delivery Conditions
- EN-10277-2 - Part 2: Steels for General Engineering Purposes, Bright Steel Products - Technical Del
- EN-10277-3 - Part 3: Free-Cutting Steels, Bright Steel Products - Technical Delivery Conditions
- EN-10277-4 - Part 4: Case-Hardening Steels, Bright Steel Products - Technical Delivery Conditions
- EN-10277-5 - Part 5: Steels for Quenching & Tempering, Bright Steel Products - Technical Delivery C
- EN-ISO-15630-3 - Part 3: Prestressing Steel, Steel for the Reinforcement & Prestressing of Concrete - T
- EN-ISO-16120-1 - Non-alloy steel wire rod for conversion to wire - Part 1: General requirements
- EN-ISO-16120-2 - Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod
- EN-ISO-16120-3 - Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod
- EN-ISO-16120-4 - Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications
- EN-ISO-9443 - Surface quality classes for hot-rolled bars and wire rod
- JIS-G-4311 - Heat-resisting steel bars and wire rods
- JIS-G-4311/A1 - Amendment 1 for JIS-G-4311, Heat-Resisting Steel Bars
- JIS-G-4313 - Cold rolled stainless steel strip for springs
- SIS-219180 - Steel fabric for concrete reinforcement. Technical conditions of delivery
- SS-212170 - Hot-rolled steel bulb flats
- SS-212185 - Pre-machined flat steel bar
- SS-212527 - Steel - Round bar, ground - Dimensions and tolerances
- SS-212540 - Product specification for SS-EN 10080:2005 - Steel for the reinforcement of concrete - Weldable reinforcing steel -Technical delivery conditions for bars, coils, welded fabric and lattice girders
- SS-212545 - Reinforcing steel - Corrosion resistant reinforcing steel - Technical requirements for bars, coils, welded fabric and lattice girders in stainless steel
- SS-212551 - Prestressing steels - General requirements
- SS-212553 - Prestressing steels - Strand
- SS-212554 - Prestressing steels - Bar
- SS-EN-10025 - Hot rolled products of non-alloy structural steels - Technical delivery conditions
- SS-EN-10058 - Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
- SS-EN-10059 - Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- SS-EN-10060 - Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- SS-EN-10061 - Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- SS-EN-10067 - Hot rolled bulb flats - Dimensions and toleranceson shape, dimensions and mass
- SS-EN-10080 - Steel for the reinforcement of concrete - Weldable reinforcing steel - General
- SS-EN-10087 - Free cutting steels - Technical delivery conditions for semi-finished products, hot rolled bars and rods
- SS-EN-10092-1 - Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions
- SS-EN-10113-1 - Hot-rolled products in weldable fine grain structural steels - Part 1: General delivery conditions
- SS-EN-10113-2 - Hot-rolled products in weldable fine grain structural steel - Part 2: Delivery conditions for normalized/normalized rolled steels
- SS-EN-10113-3 - Hot rolled products in weldable fine grain structural steels - Part 3: Delivery conditions for thermomechanical rolled steels
- SS-EN-10155 - Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions
- SS-EN-10163-1 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements
- SS-EN-10163-2 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
- SS-EN-10163-3 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections
- SS-EN-10164 - Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
- SS-EN-10221 - Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
- SS-EN-10238 - Automatically blast-cleaned and automatically prefabrication primed structural steel products
- SS-EN-10263-1 - Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
- SS-EN-10263-2 - Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working
- SS-EN-10263-3 - Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
- SS-EN-10263-4 - Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering
- SS-EN-10263-5 - Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
- SS-EN-10272 - Stainless steel bars for pressure purposes
- SS-EN-10273 - Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
- SS-EN-10277 - Bright steel products - Technical delivery conditions
- SS-EN-10277-1 - Bright steel products - Technical delivery conditions - Part 1: General
- SS-EN-10277-2 - Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
- SS-EN-10277-3 - Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels
- SS-EN-10277-4 - Bright steel products - Technical delivery conditions - Part 4: Case hardening steels
- SS-EN-10277-5 - Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering
- SS-EN-10278 - Dimensions and tolerances of bright steel products of stainless and other special steels
- SS-EN-10308 - Non destructive testing - Ultrasonic testing of steel bars
- SS-EN-912 - Timber fasteners - Specifications for connectors for timbers
- SS-EN-ISO-10087 - Small craft - Craft identification - Coding system (ISO 10087:2022)
- SS-EN-ISO-11562 - Geometrical product specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters (ISO 11562:1996/Cor 1:1998)
- SS-EN-ISO-16120-1 - Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017)
- SS-EN-ISO-16120-2 - Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod (ISO 16120-2:2017)
- SS-EN-ISO-16120-3 - Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011)
- SS-EN-ISO-16120-4 - Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications (ISO 16120-4:2017)
- SS-EN-ISO-9443 - Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018)
- SS-ENV-10080 - Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B500 - Technical delivery conditions for bars, coils and welded fabric
- SS-ISO-10065 - Steel bars for the reinforcement of concrete - Bend and rebend test
- SS-ISO-10606 - Steel for the reinforcement of concrete - Determination of percentage total elongation at maximum force
- SS-ISO-722 - Rock drilling equipment - Hollow drill steels in bar form, hexagonal and round