Document Center List of Standards on Wood-Based Panels In General
ICS Code 79.060.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D1166 - Standard Test Method for Methoxyl Groups in Wood and Related Materials
- ASTM-D1554 - Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials
- ASTM-D1666 - Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Panel Materials
- ASTM-D2065 - Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
- ASTM-D2395 - Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
- ASTM-D3043 - Standard Test Methods for Structural Panels in Flexure
- ASTM-D3201 - Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
- ASTM-D358 - Standard Specification for Wood to Be Used as Panels in Weathering Tests of Coatings (Withdrawn 2014)
- ASTM-D3737 - Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
- ASTM-D4442 - Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
- ASTM-D4761 - Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
- ASTM-D4933 - Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials
- ASTM-D5456 - Standard Specification for Evaluation of Structural Composite Lumber Products
- ASTM-D5795 - Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus
- ASTM-D5824 - Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
- ASTM-D6330 - Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions
- ASTM-D6643 - Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
- ASTM-D7033 - Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
- ASTM-D7247 - Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
- ASTM-D7249 - Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
- ASTM-D7250 - Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
- ASTM-D7433 - Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels
- ASTM-D7612 - Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources
- ASTM-D7672 - Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
- ASTM-D7787 - Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings
- ASTM-D7966 - Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
- ASTM-D7989 - Standard Practice for Demonstrating Equivalent In-Plane Lateral Seismic Performance to Wood-Frame Shear Walls Sheathed with Wood Structural Panels
- ASTM-E1307 - Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
- ASTM-E2726 - Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
- ASTM-E661 - Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
BSI:
- BS-1982 - Methods of test for fungal resistance of manufactured building materials made of or containing materials of organic origin
- BS-1982-0 - Fungal resistance of panel products made of or containing materials of organic origin
- BS-1982-1 - Fungal resistance of panel products made of or containing materials of organic origin
- BS-1982-2 - Fungal resistance of panel products made of or containing materials of organic origin
- BS-1982-3 - Fungal resistance of panel products made of or containing materials of organic origin
- BS-6100-4.1 - Glossary of building and civil engineering terms. Forest products. Characteristics and properties of timber and wood based panel products
- BS-6100-4.3 - Glossary of building and civil engineering terms. Forest products. Wood based panel products
- BS-6100-4-4.1 - Glossary of building and civil engineering terms. Forest products
- BS-6100-8 - Building and civil engineering. Vocabulary
- BS-6446 - Specification for manufacture of glued structural components of timber and wood based panels
- BS-EN-1058 - Wood-based panels. Determination of characteristic 5-percentile values and characteristic mean values
- BS-EN-113-3 - Durability of wood and wood-based products. Test method against wood destroying basidiomycetes
- BS-EN-1156 - Wood-based panels. Determination of duration of load and creep factors
- BS-EN-12871 - Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
- BS-EN-13446 - Wood-based panels. Determination of withdrawal capacity of fasteners
- BS-EN-13810-1 - Wood-based panels. Floating floors
- BS-EN-13879 - Wood-based panels. Determination of edgewise bending properties
- BS-EN-13986 - Wood-based panels for use in construction. Characteristics, evaluation of conformity and marking
- BS-EN-14220 - Timber and wood-based materials in external windows, external door leaves and external doorframes. Requirements and specifications
- BS-EN-14221 - Timber and wood-based materials in internal windows, internal door leaves and internal doorframes. Requirements and specifications
- BS-EN-14322 - Wood-based panels. Melamine faced boards for interior uses. Definition, requirements and classification
- BS-EN-14322-TC - Tracked Changes. Wood-based panels. Melamine faced boards for interior uses. Definition, requirements and classification
- BS-EN-14323 - Wood-based panels. Melamine faced boards for interior uses. Test methods
- BS-EN-14323-TC - Tracked Changes. Wood-based panels. Melamine faced boards for interior uses. Test methods
- BS-EN-16718 - Wood and wood based products. Dosage of the total organic carbon (TOC) in wood and wood based products
- BS-EN-1910 - Wood flooring and wood panelling and cladding. Determination of dimensional stability
- BS-EN-318 - Wood based panels. Determination of dimensional changes associated with changes in relative humidity
- BS-EN-325 - Wood-based panels. Determination of dimensions of test pieces
- BS-EN-326-2 - Wood-based panels. Sampling, cutting and inspection
- BS-EN-717-1 - Wood-based panels. Determination of formaldehyde release
- BS-EN-717-2 - Wood-based panels. Determination of formaldehyde release. Formaldehyde release by the gas analysis method
- BS-EN-ISO-12460-3 - Wood-based panels. Determination of formaldehyde release
- BS-EN-ISO-12460-4 - Wood-based panels. Determination of formaldehyde release
- BS-EN-ISO-12460-5 - Wood-based panels. Determination of formaldehyde release
- DD-CEN-12872 - Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs
- DD-CEN-14966 - Wood-based panels. Small scale indicative test methods for certain mechanical properties
- DD-CEN-15534-1 - Wood-plastics composites (WPC). Test methods for characterisation of WPC materials and products
- DD-CEN-15534-2 - Wood-plastics composites (WPC)
- DD-CEN-15534-3 - Wood-plastics composites (WPC). Characterisation of WPC products
- DD-ENV-1156 - Wood-based panels. Determination of duration of load and creep factors
- DD-ENV-12038 - Durability of wood and wood-based products. Wood-based panels. Method of test for determining the resistance against wood-destroying basidiomycetes
- DD-ENV-12872 - Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs
- DD-ENV-717-1 - Wood-based panels. Determination of formaldehyde release
- PAS-104 - Wood Recycling in the Panelboard Manufacturing Industry, Specification for Quality & G
- PD-CEN-12872 - Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs
- PD-CEN-16526 - Sandwich boards for furniture (SWB-F). Factory made products. Definition, classification and test methods for determination of performance characteristics
- PD-CEN-17810 - Durability of wood and wood-based products. Interpretation document for standards related to efficacy requirements and specifications of wood preservatives
ISO:
- ISO-12460-1 - Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the 1-cubic-metre chamber method
- ISO-12460-1-AM1 - - Amendment 1: Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the 1-cubic-metre chamber method - Amendment 1: Other analytical procedures
- ISO-12460-2 - Wood-based panels - Determination of formaldehyde release - Part 2: Small-scale chamber method
- ISO-12460-3 - Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method
- ISO-12460-4 - Wood-based panels - Determination of formaldehyde release - Part 4: Desiccator method
- ISO-12460-4-AM1 - Wood-based panels - Determination of formaldehyde release - Part 4: Desiccator method - Amendment 1
- ISO-12460-5 - Wood-based panels - Determination of formaldehyde release - Part 5: Extraction method (called the perforator method)
- ISO-16572 - Timber structures - Wood-based panels - Test methods for structural properties
- ISO-16978 - Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- ISO-16979 - Wood-based panels - Determination of moisture content
- ISO-16981 - Wood-based panels - Determination of surface soundness
- ISO-16983 - Wood-based panels - Determination of swelling in thickness after immersion in water
- ISO-16984 - Wood-based panels - Determination of tensile strength perpendicular to the plane of the panel
- ISO-16985 - Wood-based panels - Determination of dimensional changes associated with changes in relative humidity
- ISO-16987 - Wood-based panels -- Determination of moisture resistance under cyclic test conditions
- ISO-16998 - Wood-based panels - Determination of moisture resistance - Boil test
- ISO-16999 - Wood-based panels - Sampling and cutting of test pieces
- ISO-18775 - Veneers - Terms and definitions, determination of physical characteristics and tolerances
- ISO-20585 - Wood-based panels - Determination of wet bending strength after immersion in water at 70 degrees C or 100 degrees C (boiling temperature)
- ISO-21887 - Durability of wood and wood-based products - Use classes
- ISO-27528 - Wood-based panels - Determination of resistance to axial withdrawal of screws
- ISO-9424 - Wood-based panels - Determination of dimensions of test pieces
- ISO-9426 - Wood-based panels - Determination of dimensions of panels
- ISO-9427 - Wood-based panels - Determination of density
- ISO/FDIS-12460-3 - Part 3: Gas Analysis Method, Wood-Based Panels - Determination of Formaldehyde Release
- ISO/FDIS-12460-4 - Part 4: Desiccator Method, Wood-Based Panels - Determination of Formaldehyde Release
Other SDOs:
- DIN-EN-13986 - Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking; German version EN 13986:2004+A1:2015
- DIN-EN-14220 - Timber & Wood-Based Materials in External Windows, External Door Leaves & External Do
- DIN-EN-14221 - Timber & Wood-Based Materials in Internal Windows, Internal Door Leaves & Internal Do
- DIN-EN-326-2 - Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014
- DIN-EN-717-1 - Part 1: Formaldehyde Emission by the Chamber Method, Wood-Based Panels, Determination
- DIN-EN-789 - Timber Structures - Test Methods, Determination of Mechanical Properties of Wood-Based
- EN-1058 - Wood-Based Panels, Determination of Characteristic 5-Percentle Values & Characteristic
- EN-1156 - Wood-based panels - Determination of duration of load and creep factors
- EN-12871 - Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
- EN-14220 - Timber & Wood-Based Materials in External Windows, External Door Leaves & External Do
- EN-14221 - Timber & Wood-Based Materials in Internal Windows, Internal Door Leaves & Internal Do
- EN-16718 - Wood and wood based products - Dosage of the total organic carbon (TOC) in wood and wood based products
- EN-318 - Wood Based Panels, Determination of Dimensional Changes Associated With Changes in Rel
- EN-325 - Wood-based panels - Determination of dimensions of test pieces
- EN-326-2 - Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
- EN-717-1 - Part 1: Formaldehyde Emission by the Chamber Method, Wood-Based Panels, Determination
- EN-ISO-12460-3 - Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method
- EN-ISO-12460-4 - Wood-based panels - Determination of formaldehyde release - Part 4: Desiccator method
- EN-ISO-12460-5 - Wood-based panels - Determination of formaldehyde release - Part 5: Extraction method (called the perforator method)
- SIS-271110 - Sheets - Basic sizes
- SIS-271111 - Corrugated sheets. Pitch
- SIS-CEN/TR-12872 - Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs
- SIS-CEN/TR-17810 - Durability of wood and wood-based products - Interpretation document for standards related to efficacy requirements and specifications of wood preservatives
- SIS-CEN/TS-15534-1 - Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
- SIS-CEN/TS-15534-2 - Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials
- SIS-CEN/TS-15534-3 - Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products
- SIS-CEN/TS-16526 - Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics
- SS-EN-1058 - Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values
- SS-EN-1156 - Wood-based panels - Determination of duration of load and creep factors
- SS-EN-12871 - Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
- SS-EN-13446 - Wood-based panels - Determination of withdrawal capacity of fasteners
- SS-EN-13810-1 - Wood-based panels - Floating floors - Part 1: Performance specifications and requirements
- SS-EN-13879 - Wood-based panels - Determination of edgewise bending properties
- SS-EN-13986 - Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
- SS-EN-14220 - Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications
- SS-EN-14221 - Timber and wood-framed materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications
- SS-EN-14322 - Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification
- SS-EN-14323 - Wood-based panels - Melamine faced boards for interior uses - Test methods
- SS-EN-15534-1 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
- SS-EN-15534-4 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
- SS-EN-15534-5 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
- SS-EN-16718 - Wood and wood based products - Dosage of the total organic carbon (TOC) in wood and wood based products
- SS-EN-1801 - Transportable gas cylinders - Filling conditions for single acetylene cylinders
- SS-EN-318 - Wood-based panels - Determination of dimensional changes associated with changes in relative humidity
- SS-EN-321 - Wood-based panels - Determination of moisture resistance under cyclic test conditions
- SS-EN-325 - Wood-based panels - Determination of dimensions of test pieces
- SS-EN-326-2 - Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
- SS-EN-326-3 - Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
- SS-EN-635-5 - Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects
- SS-EN-717-1 - Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method
- SS-EN-ISO-12460-3 - Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020)
- SS-EN-ISO-12460-4 - Wood-based panels - Determination of formaldehyde release - Part 4: Desiccator method (ISO 12460-4:2016)
- SS-EN-ISO-12460-5 - Wood-based panels - Determination of formaldehyde release - Part 5: Extraction method (called the perforator method) (ISO 12460-5:2015)
- SS-EN-ISO-717-1 - Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2020)
- SS-ENV-12038 - Durability of wood and wood-based products - Wood-based panels - Method of test for determining the resistance against wood-destroying basidiomycetes
- UNE-EN-ISO-12460-3 - Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method
- UNE-EN-ISO-12460-5 - Wood-based panels - Determination of formaldehyde release - Part 5: Extraction method (called the perforator method)