Document Center List of Standards on Glass In Building
ICS Code 81.040.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1036 - Standard Specification for Flat Glass
- ASTM-C1172 - Standard Specification for Laminated Architectural Flat Glass
- ASTM-C1249 - Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
- ASTM-C1256 - Standard Practice for Interpreting Glass Fracture Surface Features
- ASTM-C1265 - Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
- ASTM-C1279 - Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
- ASTM-C1369 - Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
- ASTM-C1376 - Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
- ASTM-C1394 - Standard Guide for In-Situ Structural Silicone Glazing Evaluation
- ASTM-C1422 - Standard Specification for Chemically Strengthened Flat Glass
- ASTM-C1443 - Standard Specification for Glasses, Portlight, Circular, Fully Tempered (Withdrawn 2021)
- ASTM-C1464 - Standard Specification for Bent Glass
- ASTM-C1467 - Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
- ASTM-C1487 - Standard Guide for Remedying Structural Silicone Glazing
- ASTM-C1651 - Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
- ASTM-C1652 - Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids
- ASTM-C724 - Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
- ASTM-D8040 - Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware
- ASTM-E1887 - Standard Test Method for Fog Determination (Withdrawn 2006)
- ASTM-E2094 - Standard Practice for Evaluating the Service Life of Chromogenic Glazings (Withdrawn 2011)
- ASTM-E2098 - Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
- ASTM-E2141 - Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
- ASTM-E2189 - Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units
- ASTM-E2190 - Standard Specification for Insulating Glass Unit Performance and Evaluation
- ASTM-E2323 - Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer (Withdrawn 2012)
- ASTM-E2353 - Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
- ASTM-E2358 - Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
- ASTM-E2431 - Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
- ASTM-E2461 - Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
- ASTM-E2751 - Standard Practice for Design and Performance of Supported Laminated Glass Walkways
- ASTM-E2953 - Standard Specification for Evaluating Accelerated Aging Performance of Electrochromic Devices in Sealed Insulating Glass Units
- ASTM-E3119 - Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing
- ASTM-E3120 - Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings
- ASTM-E424 - Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
- ASTM-E774 - Standard Specification for the Classification of the Durability of Sealed Insulating Glass Units (Withdrawn 2006)
- ASTM-E997 - Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing
- ASTM-E998 - Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
- ASTM-F1233 - Standard Test Method for Security Glazing Materials And Systems
- ASTM-F1642 - Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
- ASTM-F2912 - Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings
- ASTM-F3006 - Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing
- ASTM-F3007 - Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass
- ASTM-F3057 - Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings
BSI:
- BS-5544 - Specification for anti-bandit glazing (glazing resistant to manual attack)
- BS-6262 - Code of practice for glazing for buildings
- BS-6262-1 - Glazing for buildings
- BS-6262-1-TC - Tracked Changes. Glazing for buildings
- BS-6262-2 - Glazing for buildings
- BS-6262-3 - Glazing for buildings
- BS-6262-4 - Glazing for buildings. Code of practice for safety related to human impact
- BS-6262-6 - Glazing for buildings
- BS-6262-7 - Glazing for buildings
- BS-6262-7-TC - Tracked Changes. Glazing for buildings
- BS-6993-2 - Thermal and radiometric properties of glazing
- BS-952-1 - Glass for glazing
- BS-952-2 - Glass for glazing
- BS-EN-1036-1 - Glass in building. Mirrors from silver-coated float glass for internal use
- BS-EN-1036-2 - Glass in building. Mirrors from silver-coated float glass for internal use
- BS-EN-1051-1 - Glass in building. Glass blocks and glass pavers
- BS-EN-1051-2 - Glass in building. Glass blocks and glass pavers
- BS-EN-1063 - Glass in building. Security glazing. Testing and classification of resistance against bullet attack
- BS-EN-1096-1 - Glass in building. Coated glass
- BS-EN-1096-2 - Glass in building. Coated glass
- BS-EN-1096-3 - Glass in building. Coated glass
- BS-EN-1096-4 - Glass in building. Coated glass
- BS-EN-1096-4-TC - Tracked Changes. Glass in building. Coated glass
- BS-EN-1096-5 - Glass in building. Coated glass
- BS-EN-12150-1 - Glass in building. Thermally toughened soda lime silicate safety glass
- BS-EN-12150-1-TC - Glass in building. Thermally toughened soda lime silicate safety glass
- BS-EN-12150-2 - Glass in building. Thermally toughened soda lime silicate safety glass
- BS-EN-12337-1 - Glass in building. Chemically strengthened soda lime silicate glass
- BS-EN-12337-2 - Glass in building. Chemically strengthed soda lime silicate glass
- BS-EN-12488 - Glass in building. Glazing recommendations. Assembly principles for vertical and sloping glazing
- BS-EN-12600 - Glass in building. Pendulum test. Impact test method and classification for flat glass
- BS-EN-12603 - Glass in building. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
- BS-EN-12758 - Glass in building. Glazing and airborne sound insulation. Product descriptions, determination of properties and extension rules
- BS-EN-1279-1-TC - Tracked Changes. Glass in building. Insulating glass units
- BS-EN-1279-2 - Glass in building. Insulating glass units
- BS-EN-1279-2-TC - Tracked Changes. Glass in building. Insulating glass units
- BS-EN-1279-3 - Glass in building. Insulating glass units
- BS-EN-1279-3-TC - Tracked Changes. Glass in building. Insulating glass units
- BS-EN-1279-4-TC - Tracked Changes. Glass in Building. Insulating Glass Units
- BS-EN-1279-5 - Glass in building. Insulating glass units
- BS-EN-1279-5-TC - Tracked Changes. Glass in building. Insulating glass units
- BS-EN-1279-6 - Glass in building. Insulating glass units
- BS-EN-1279-6-TC - Tracked Changes. Glass in building. Insulating glass units
- BS-EN-1288-1 - Glass in building. Determination of the bending strength of glass
- BS-EN-1288-2 - Glass in building. Determination of the bending strength of glass
- BS-EN-1288-3 - Glass in building. Determination of the bending strength of glass
- BS-EN-1288-4 - Glass in building. Determination of the bending strength of glass
- BS-EN-1288-5 - Glass in building. Determination of the bending strength of glass
- BS-EN-12898 - Glass in building. Determination of the emissivity
- BS-EN-13022-1 - Glass in building. Structural sealant glazing
- BS-EN-13022-2 - Glass in building. Structural sealant glazing
- BS-EN-13024-1 - Glass in building. Thermally toughened borosilicate safety glass
- BS-EN-13024-2 - Glass in building. Thermally toughened borosilicate safety glass
- BS-EN-13541 - Glass in building. Security glazing. Testing and classification of resistance against explosion pressure
- BS-EN-14178-1 - Glass in building. Basic alkaline earth silicate glass
- BS-EN-14178-2 - Glass in building. Basic alkaline earth silicate glass products
- BS-EN-14179-1 - Glass in building. Heat soaked thermally toughened soda lime silicate safety glass
- BS-EN-14179-1-TC - Tracked Changes. Glass in building. Heat soaked thermally toughened soda lime silicate safety glass
- BS-EN-14179-2 - Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glass
- BS-EN-14321-1 - Glass in building. Thermally toughened alkaline earth silicate safety glass
- BS-EN-14321-2 - Glass in building. Thermally toughened alkaline earth silicate safety glass
- BS-EN-14449 - Glass in building. Laminated glass and laminated safety glass. Evaluation of conformity/product standard
- BS-EN-15434 - Glass in building. Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
- BS-EN-15434-1 - Bonding sealants
- BS-EN-15434-1-TC - Tracked Changes. Bonding sealants
- BS-EN-15681-1 - Glass in building. Basic alumino silicate glass products
- BS-EN-15681-2 - Glass in Building. Basic alumino silicate glass products
- BS-EN-15682-1 - Glass in building. Heat soaked thermally toughened alkaline earth silicate safety glass
- BS-EN-15682-2 - Glass in building. Heat soaked thermally toughened alkaline earth silicate safety glass
- BS-EN-15683-1 - Glass in building. Thermally toughened soda lime silicate channel shaped safety glass
- BS-EN-15683-2 - Glass in building. Thermally toughened soda lime silicate channel shaped safety glass
- BS-EN-15752-1 - Glass in building. Adhesive backed polymeric film
- BS-EN-15755-1 - Glass in building. Adhesive backed polymeric filmed glass
- BS-EN-16477-1 - Glass in building. Painted glass for internal use
- BS-EN-16612 - Glass in building. Determination of the lateral load resistance of glass panes by calculation
- BS-EN-16613 - Glass in building. Laminated glass and laminated safety glass. Determination of interlayer viscoelastic properties
- BS-EN-16759 - Bonded Glazing for doors, windows and curtain walling. Verification of mechanical performance of bonding on aluminium and steel surfaces
- BS-EN-17074 - Glass in building. Environmental product declaration. Product category rules for flat glass products
- BS-EN-17416 - Glass in building. Assessment of release of dangerous substances. Determination of emissions into indoor air from glass products
- BS-EN-1748-1 - Part 1: Borosilicate Glasses, Glass in Building - Special Basic Products
- BS-EN-1748-1-2 - Glass in building. Special basic products
- BS-EN-1748-2 - Glass in building
- BS-EN-1748-2-2 - Glass in building. Special basic products
- BS-EN-17635 - Glass in building. Shatter properties. Requirements and assessment methods
- BS-EN-17839 - Glass in building. Glazing and airborne sound insulation. Validation procedure for calculation tools.
- BS-EN-1863-1 - Glass in building. Heat strengthened soda lime silicate glass
- BS-EN-1863-2 - Glass in building. Heat strengthened soda lime silicate glass
- BS-EN-356 - Glass in building. Security glazing. Testing and classification of resistance against manual attack
- BS-EN-572-1 - Glass in building. Basic soda-lime silicate glass products
- BS-EN-572-2 - Glass in building. Basic soda lime silicate glass products
- BS-EN-572-3 - Glass in building. Basic soda lime silicate glass products
- BS-EN-572-4 - Glass in building. Basic soda lime silicate glass products
- BS-EN-572-5 - Glass in building. Basic soda lime silicate glass products
- BS-EN-572-6 - Glass in building. Basic soda lime silicate glass products
- BS-EN-572-7 - Glass in building. Basic soda lime silicate glass products
- BS-EN-572-8 - Glass in building. Basic soda-lime silicate glass products
- BS-EN-572-9 - Glass in building. Basic soda lime silicate glass products
- BS-EN-673 - Glass in building. Determination of thermal transmittance (U value). Calculation method
- BS-EN-674 - Glass in building. Determination of thermal transmittance (U value). Guarded hot plate method
- BS-EN-675 - Glass in building. Determination of thermal transmittance (U value). Heat flow meter method
- BS-EN-ISO-12543-1 - Glass in building. Laminated glass and laminated safety glass
- BS-EN-ISO-12543-1-TC - Tracked Changes. Glass in building. Laminated glass and laminated safety glass
- BS-EN-ISO-12543-2 - Glass in building. Laminated glass and laminated safety glass
- BS-EN-ISO-12543-2-TC - Tracked Changes. Glass in building. Laminated glass and laminated safety glass
- BS-EN-ISO-12543-3 - Glass in building. Laminated glass and laminated safety glass
- BS-EN-ISO-12543-3-TC - Tracked Changes. Glass in building. Laminated glass and laminated safety glass
- BS-EN-ISO-12543-4 - Glass in building. Laminated glass and laminated safety glass
- BS-EN-ISO-12543-4-TC - Tracked Changes. Glass in building. Laminated glass and laminated safety glass
- BS-EN-ISO-12543-5 - Glass in building. Laminated glass and laminated safety glass
- BS-EN-ISO-12543-5-TC - Tracked Changes. Glass in building. Laminated glass and laminated safety glass
- BS-EN-ISO-12543-6 - Glass in building. Laminated glass and laminated safety glass
- BS-EN-ISO-12543-6-TC - Tracked Changes. Glass in building. Laminated glass and laminated safety glass
- BS-EN-ISO-14438 - Glass in building. Determination of energy balance value. Calculation method
- BS-ISO-11485-1 - Glass in building. Curved glass
- BS-ISO-11485-2 - Glass in building. Curved glass
- BS-ISO-11485-3 - Glass in building. Curved glass
- BS-ISO-16932 - Glass in building. Destructive-windstorm-resistant security glazing. Test and classification
- BS-ISO-16936-1 - Glass in building. Forced-entry security glazing
- BS-ISO-18543 - Glass in building. Electrochromic glazings. Accelerated ageing test and requirements
- BS-ISO-18543-TC - Tracked Changes. Glass in building. Electrochromic glazings. Accelerated ageing test and requirements
- BS-ISO-19916-1 - Glass in building. Vacuum insulating glass
- BS-ISO-19916-3 - Glass in building. Vacuum insulating glass
- BS-ISO-21690 - Glass in building. Glass blocks. Specification and test methods
- BS-ISO-22509 - Glass in building. Heat strengthened soda lime silicate glass
- BS-ISO-22897 - Glass in building. Glazing and airborne sound insulation. Product descriptions, determination of properties and extension rules
- BS-ISO-29584 - Glass in building. Pendulum impact testing and classification of safety glass
- PD-ISO-18178 - Glass in building. Laminated solar photovoltaic glass for use in buildings
- PD-ISO-21480 - Glass in building. General technical requirements of building integrated photovoltaic modules recycling
- PD-ISO-21486 - Glass in building. Retesting requirements for laminated solar photovoltaic glass for use in buildings
ISO:
- ISO-10291 - Glass in building - Determination of steady-state U values (thermal transmittance) of multiple glazing - Guarded hot plate method
- ISO-10292 - Glass in building - Calculation of steady-state U values (thermal transmittance) of multiple glazing
- ISO-10293 - Glass in building - Determination of steady-state U values (thermal transmittance) of multiple glazing - Heat flow meter method
- ISO-11479-1 - Glass in building - Coated glass - Part 1: Physical defects
- ISO-11479-2 - Glass in building - Coated glass - Part 2: Colour of façade
- ISO-11485-1 - Glass in building - Curved glass - Part 1: Terminology and definitions
- ISO-11485-2 - Glass in building - Curved glass - Part 2: Quality requirements
- ISO-11485-3 - Glass in building - Curved glass - Part 3: Requirements for curved tempered and curved laminated safety glass
- ISO-12540 - Glass in building - Tempered soda lime silicate safety glass
- ISO-12543-1 - Glass in building - Laminated glass and laminated safety glass - Part 1: Vocabulary and description of component parts
- ISO-12543-2 - Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass
- ISO-12543-3 - Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass
- ISO-12543-4 - Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability
- ISO-12543-5 - Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing
- ISO-12543-6 - Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance
- ISO-1288-1 - Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
- ISO-1288-2 - Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double-ring test on flat specimens with large test surface areas
- ISO-1288-3 - Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
- ISO-1288-4 - Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
- ISO-1288-5 - Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
- ISO-14438 - Glass in building - Determination of energy balance value - Calculation method
- ISO-16293-1 - Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
- ISO-16293-2 - Glass in building - Basic soda lime silicate glass products - Part 2: Float glass
- ISO-16293-3 - Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass
- ISO-16293-4 - Glass in building - Basic soda lime silicate glass products - Part 4: Wired patterned glass
- ISO-16293-5 - Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass
- ISO-16932 - Glass in building - Destructive-windstorm-resistant security glazing - Test and classification
- ISO-16933 - Glass in building - Explosion-resistant security glazing - Test and classification for arena air-blast loading
- ISO-16934 - Glass in building - Explosion-resistant security glazing - Test and classification by shock-tube loading
- ISO-16935 - Glass in building - Bullet-resistant security glazing - Test and classification
- ISO-16936-1 - Glass in building - Forced-entry security glazing - Part 1: Test and classification by repetitive ball drop
- ISO-16936-2 - Glass in building - Forced-entry security glazing - Part 2: Test and classification by repetitive impact of a hammer and axe at room temperature
- ISO-16936-3 - Glass in building - Forced-entry security glazing - Part 3: Test and classification by manual attack
- ISO-16936-4 - Glass in building - Forced-entry security glazing - Part 4: Test and classification by pendulum impact under thermally and fire stressed conditions
- ISO-16940 - Glass in building - Glazing and airborne sound insulation - Measurement of the mechanical impedance of laminated glass
- ISO-18178 - Glass in building - Laminated solar photovoltaic glass for use in buildings
- ISO-18543 - Glass in building - Electrochromic glazings - Accelerated ageing test and requirements
- ISO-19916-1 - Glass in building - Vacuum insulating glass - Part 1: Basic specification of products and evaluation methods for thermal and sound insulating performance
- ISO-19916-3 - Glass in building - Vacuum insulating glass - Part 3: Test methods for evaluation of performance under temperature differences
- ISO-20492-1 - Glass in buildings - Insulating glass - Part 1: Durability of edge seals by climate tests
- ISO-20492-2 - Glass in buildings - Insulating glass - Part 2: Chemical fogging tests
- ISO-20492-3 - Glass in buildings - Insulating glass - Part 3: Gas concentration and gas leakage
- ISO-20492-4 - Glass in buildings - Insulating glass - Part 4: Methods of test for the physical attributes of edge seals
- ISO-20657 - Glass in building - Heat soaked tempered soda lime silicate safety glass
- ISO-21480 - Glass in building - General technical requirements of building integrated photovoltaic modules recycling
- ISO-21486 - Glass in building - Retesting requirements for laminated solar photovoltaic glass for use in buildings
- ISO-21690 - Glass in building - Glass blocks - Specification and test methods
- ISO-22509 - Glass in building - Heat strengthened soda lime silicate glass
- ISO-22897 - Glass in building - Glazing and airborne sound insulation - Product descriptions, determination of properties and extension rules
- ISO-23237 - Glass in building - Laminated solar photovoltaic glass for use in buildings - Light transmittance measurement method
- ISO-25537 - Glass in building - Silvered, flat-glass mirror
- ISO-28278-1 - Glass in building - Glass products for structural sealant glazing - Part 1: Supported and unsupported monolithic and multiple glazing
- ISO-28278-2 - Glass in building - Glass products for structural sealant glazing - Part 2: Assembly rules
- ISO-29584 - Glass in building - Pendulum impact testing and classification of safety glass
- ISO-3009 - Fire-resistance tests - Elements of building construction - Glazed elements
- ISO-3009-1 - Amendment 1 to ISO 3009:1976
- ISO-9050 - Glass in building -- Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
- ISO-9051 - Glass in building - Fire-resistant glazed assemblies containing transparent or translucent glass, for use in building
- ISO/PAS-16940 - Glass in building - Glazing and airborne sound insulation - Measurement of the mechanical impedance of laminated glass
Other SDOs:
- DIN-EN-1051-1 - Part 1: Definitions & Description, Glass in Building, Glass Blocks & Glass Pavers
- DIN-EN-1096-4 - Part 4: Evaluation of Conformity (Product Standard), Glass in Building, Coated Glass
- DIN-EN-12150-2 - Part 2: Evaluation of Conformity/Product Standard, Glass in Building, Thermally Tough
- DIN-EN-12337-2 - Part 2: Evaluation of Conformity/Product Standard, Glass in Building, Chemically Stre
- DIN-EN-12758 - Glass in Building - Glazing & Airborne Sound Insulation - Product Description & Determ
- DIN-EN-1279-5 - Part 5: Evaluation of Conformity, Glass in Building - Insulating Glass Units
- DIN-EN-13022-1 - Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing; German version EN 13022-1:2014
- DIN-EN-13022-2 - Glass in building - Structural sealant glazing - Part 2: Assembly rules; German version EN 13022-2:2014
- DIN-EN-13024-1 - Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description
- DIN-EN-13024-2 - Part 2: Evaluation of Conformity/Product Standard, Glass in Building, Thermally Tough
- DIN-EN-14178-1 - Part 1: Float Glass, Glass in Building, Basic Alkaline Earth Silicate Glass Products
- DIN-EN-14178-2 - Part 2: Evaluation of Conformity (Product Standard), Glass in Building, Basic Alkaline
- DIN-EN-14179-1 - Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description; German version EN 14179-1:2016
- DIN-EN-14179-2 - Part 2: Evaluation of Conformity/Product Standard, Glass in Building, Heat Soaked The
- DIN-EN-14321-1 - Part 1: Definition & Description, Glass in Building, Thermally Toughened Alkaline Eart
- DIN-EN-14321-2 - Part 2: Evaluation of Conformity/Product Standard, Glass in Building, Thermally Tough
- DIN-EN-14449 - Glass in Building, Laminated Glass & Laminated Safety Glass - Evaluation of Conformit
- DIN-EN-15434 - Glass in Building - Product Standard for Structural &/or Ultra-Violet Resistant Sealan
- DIN-EN-1748-1-1 - Part 1-1: Definitions & General Physical & Mechanical Properties, Glass in Building -
- DIN-EN-1748-1-2 - Part 1-2: Evaluation of Conformity (Product Standard), Glass in Building - Special Bas
- DIN-EN-1748-2-1 - Part 2-1: Definitions & General Physical & Mechanical Properties, Glass in Building -
- DIN-EN-1748-2-2 - Part 2-2: Evaluation of Conformity (Product Standard), Glass in Building - Special Bas
- DIN-EN-1863-2 - Part 2: Evaluation of Conformity/Product Standard, Glass in Building, Heat Strengthen
- DIN-EN-357 - Glass in Building, Fire-Resistant Glazed Elements With Transparent or Translucent Glas
- DIN-EN-572-1 - Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties; German version EN 572-1:2012+A1:2016
- DIN-EN-572-2 - Glass in building - Basic soda lime silicate glass products - Part 2: Float glass; German version EN 572-2:2012
- DIN-EN-572-3 - Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass; German version EN 572-3:2012
- DIN-EN-572-4 - Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass; German version EN 572-4:2012
- DIN-EN-572-5 - Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass; German version EN 572-5:2012
- DIN-EN-572-6 - Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass; German version EN 572-6:2012
- DIN-EN-572-7 - Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass; German version EN 572-7:2012
- DIN-EN-572-8 - Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes; German version EN 572-8:2012+A1:2016
- DIN-EN-572-9 - Part 9: Evaluation of Conformity (Product Standard), Glass in Building, Basic Soda Lim
- DIN-EN-673 - Glass in Building - Determination of Thermal Transmittance (Value) - Calculation Metho
- DIN-EN-ISO-12543-2 - Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass
- DS-EN-572-1 - Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
- EN-1036-1 - Part 1: Definitions, Glass in Building - Mirrors From Silver-Coated Float Glass for In
- EN-1036-2 - Part 2: Evaluation of Conformity - Product Standard, Glass in Building - Mirrors From
- EN-1051-1 - Part 1: Definitions & Description, Glass in Building, Glass Blocks & Glass Pavers
- EN-1096-1 - Glass in building - Coated glass - Part 1: Definitions and classification
- EN-1096-2 - Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings
- EN-1096-3 - Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
- EN-1096-4 - Part 4: Evaluation of Conformity (Product Standard), Glass in Building, Coated Glass
- EN-1096-5 - Glass in building - Coated glass - Part 5 - Test method and classification for the self-cleaning performances of coated glass surfaces
- EN-12150-1 - Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
- EN-12150-2 - Part 2: Evaluation of Conformity/Product Standard, Glass in Building, Thermally Tough
- EN-12337-2 - Part 2: Evaluation of Conformity/Product Standard, Glass in Buidling, Chemically Stre
- EN-12488 - Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing
- EN-12758 - Glass in Building, Glazing & Airborne Sound Insulation, Product Descriptions & Determi
- EN-1279-5 - Part 5: Evaluation of Conformity, Glass in Building - Insulating Glass Units
- EN-13022-1 - Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
- EN-13022-2 - Glass in building - Structural sealant glazing - Part 2: Assembly rules
- EN-13024-1 - Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description
- EN-13024-2 - Part 2: Evaluation of Conformity/Product Standard, Glass in Building, Thermally Tough
- EN-13541 - Glass in building - Security glazing - Testing and classification of resistance against explosion pressure
- EN-14178-1 - Part 1: Float Glass, Glass in Building, Basic Alkaline Earth Silicate Glass Products
- EN-14178-2 - Part 2: Evaluation of Conformity (Product Standard), Glass in Building, Basic Alkaline
- EN-14179-1 - Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description
- EN-14179-2 - Part 2: Evaluation of Conformity/Product Standard, Glass in Building, Heat Soaked The
- EN-14321-1 - Part 1: Definitions & Description, Glass in Building, Thermally Toughened Alkaline Ear
- EN-14321-2 - Part 2: Evaluation of Conformity/Product Standard, Glass in Building, Thermally Tough
- EN-14449 - Glass in Building, Laminated Glass & Laminated Safety Glass - Evaluation of Conformit
- EN-15434 - Glass in Building - Product Standard for Structural &/or Ultra-Violet Resistant Sealan
- EN-15681-1 - Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties
- EN-15681-2 - Glass in Building - Basic alumino silicate glass products - Part 2: Product standard
- EN-15682-1 - Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description
- EN-15682-2 - Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
- EN-15683-1 - Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description
- EN-15683-2 - Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard
- EN-15752-1 - Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements
- EN-15755-1 - Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and requirements
- EN-16477-1 - Glass in building - Painted glass for internal use - Part 1: Requirements
- EN-1748-1-1 - Part 1-1: Definitions & General Physical & Mechanical Properties, Glass in Building -
- EN-1748-1-2 - Part 1-2: Evaluation of Conformity (Product Standard), Glass in Building - Special Bas
- EN-1748-2-1 - Part 2-1: Definitions & General Physical & Mechanical Properties, Glass in Building -
- EN-1748-2-2 - Part 2-2: Evaluation of Conformity (Product Standard), Glass in Building - Special Bas
- EN-1863-1 - Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
- EN-1863-2 - Part 2: Evaluation of Conformity/Product Standard, Glass in Building, Heat Strengthen
- EN-357 - Glass in Building, Fire-Resistant Glazed Elements With Transparent or Translucent Glas
- EN-572-1 - Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
- EN-572-2 - Glass in building - Basic soda lime silicate glass products - Part 2: Float glass
- EN-572-3 - Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass
- EN-572-4 - Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass
- EN-572-5 - Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass
- EN-572-6 - Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass
- EN-572-7 - Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass
- EN-572-8 - Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes
- EN-572-9 - Part 9: Evaluation of Conformity (Product Standard), Glass in Building, Basic Soda Lim
- EN-673 - Glass in Building, Determination of Thermal Transmittance (U Value), Calculation Metho
- EN-674 - Glass in building - Determination of thermal transmittance (U value) - Guarded hot plate method
- EN-675 - Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method
- EN-ISO-12543-1 - Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts
- EN-ISO-12543-2 - Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass
- EN-ISO-12543-3 - Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass
- EN-ISO-12543-4 - Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability
- EN-ISO-12543-5 - Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing
- EN-ISO-12543-6 - Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance
- EN-ISO-14438 - Glass in Building, Determination of Energy Balance Value - Calculation Method
- JIS-R-3202 - Float glass and polished plate glass
- JIS-R-3220 - Glass in building -- Silvered, flat-glass mirror
- SS-24828 - Fire tests - Building construction - Glazed elements
- SS-EN-1036 - Glass in building - Mirrors from silver-coated float glass for internal use
- SS-EN-1036-1 - Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and tests methods
- SS-EN-1036-2 - Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard
- SS-EN-1051-1 - Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description
- SS-EN-1051-2 - Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard
- SS-EN-1063 - Glass in building - Security glazing - Testing and classification of resistance against bullet attack
- SS-EN-1096-1 - Glass in building - Coated glass - Part 1: Definitions and classification
- SS-EN-1096-2 - Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings
- SS-EN-1096-3 - Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
- SS-EN-1096-4 - Glass in building - Coated glass - Part 4: Product standard
- SS-EN-1096-5 - Glass in building - Coated glass - Part 5: Test method and classification for the self-cleaning performances of coated glass surfaces
- SS-EN-12150-1 - Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
- SS-EN-12150-2 - Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
- SS-EN-12337-1 - Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description
- SS-EN-12337-2 - Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
- SS-EN-12488 - Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing
- SS-EN-12600 - Glass in building - Pendulum test - Impact test method and classification for flat glass
- SS-EN-12603 - Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
- SS-EN-12758 - Glass in building - Glazing and airborne sound insulation - Product descriptions, determination of properties and extension rules
- SS-EN-1279-1 - Glass in Building - Insulating glass units - Part 1: Generalities, system description, rules for substitution, tolerances and visual quality
- SS-EN-1279-2 - Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration
- SS-EN-1279-3 - Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
- SS-EN-1279-4 - Glass in Building - Insulating Glass Units - Part 4: Methods of test for the physical attributes of edge seal components and inserts
- SS-EN-1279-5 - Glass in building - Insulating glass units - Part 5: Product standard
- SS-EN-1279-6 - Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests
- SS-EN-1288-1 - Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
- SS-EN-1288-2 - Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
- SS-EN-1288-3 - Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
- SS-EN-1288-4 - Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
- SS-EN-1288-5 - Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
- SS-EN-12898 - Glass in building - Determination of the emissivity
- SS-EN-13022-1 - Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
- SS-EN-13022-2 - Glass in building - Structural sealant glazing - Part 2: Assembly rules
- SS-EN-13024-1 - Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description
- SS-EN-13024-2 - Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
- SS-EN-13541 - Glass in building - Security glazing - Testing and classification of resistance against explosion pressure
- SS-EN-14126 - Protective clothing - Performance requirements and test methods for protective clothing against infective agents
- SS-EN-14178-1 - Glass in building - Basic alkaline earth silicate glass products - Part 1: Float glass
- SS-EN-14178-2 - Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
- SS-EN-14179-1 - Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description
- SS-EN-14179-2 - Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
- SS-EN-14321-1 - Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description
- SS-EN-14321-2 - Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
- SS-EN-1434-2 - Thermal energy meters - Part 2: Constructional requirements
- SS-EN-14449 - Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
- SS-EN-15434 - Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
- SS-EN-15434-1 - Bonding sealants - Part 1: Bonded glazing sealants for direct light exposure
- SS-EN-15681-1 - Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties
- SS-EN-15681-2 - Glass in Building - Basic alumino silicate glass products - Part 2: Product standard
- SS-EN-15682-1 - Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description
- SS-EN-15682-2 - Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
- SS-EN-15683-1 - Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description
- SS-EN-15683-2 - Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard
- SS-EN-15752-1 - Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements
- SS-EN-15755-1 - Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and requirements
- SS-EN-15998 - Glass in building - Safety in case of fire, fire resistance - Glass testing methodology for the purpose of classification
- SS-EN-16477-1 - Glass in building - Painted glass for internal use - Part 1: Requirements
- SS-EN-16612 - Glass in building - Determination of the lateral load resistance of glass panes by calculation
- SS-EN-16613 - Glass in building - Laminated glass and laminated safety glass - Determination of interlayer viscoelastic properties
- SS-EN-16759 - Bonded Glazing for doors, windows and curtain walling - Verification of mechanical performance of bonding on aluminium and steel surfaces
- SS-EN-17074 - Glass in building - Environmental product declaration - Product category rules for flat glass products
- SS-EN-17416 - Glass in building - Assessment of release of dangerous substances - Determination of emissions into indoor air from glass products
- SS-EN-1748-1 - Glass in building - Special basic products - Part1: Borosilicate glasses
- SS-EN-1748-1-1 - Glass in building - Special basic products - Borosilicate glasses - Part 1-1: Definition and general physical and mechanical properties
- SS-EN-1748-1-2 - Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
- SS-EN-1748-2 - Glass in building - Special basic products - Part2: Glass ceramics
- SS-EN-1748-2-1 - Glass in building - Special basic products - Glass ceramics - Part 2-1: Definitions and general physical and mechanical properties
- SS-EN-1748-2-2 - Glass in building - Special basic products - Part 2-2: Glass ceramics - Evaluation of conformity/Product standard
- SS-EN-17635 - Glass in building - Shatter properties - Requirements and assessment methods
- SS-EN-1863-1 - Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
- SS-EN-1863-2 - Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
- SS-EN-356 - Glass in building - Security glazing - Testing and classification of resistance against manual attack
- SS-EN-357 - Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance
- SS-EN-410 - Glass in building - Determination of luminous and solar characteristics of glazing
- SS-EN-572-1 - Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
- SS-EN-572-2 - Glass in building - Basic soda lime silicate glass products - Part 2: Float glass
- SS-EN-572-3 - Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass
- SS-EN-572-4 - Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass
- SS-EN-572-5 - Glass in building - Basic soda lime silicate glass products - Part 2: Patterned glass
- SS-EN-572-6 - Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass
- SS-EN-572-7 - Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass
- SS-EN-572-8 - Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes
- SS-EN-572-9 - Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
- SS-EN-673 - Glass in building - Determination of thermal transmittance (U value) - Calculation method
- SS-EN-673-AM1 - Glass in building - Determination of thermal transmittance (U value) - Calculation method
- SS-EN-673-AM2 - Glass in building - Determination of thermal transmittance (U value) - Calculation method
- SS-EN-674 - Glass in building - Determination of thermal transmittance (U value) - Guarded hot plate method
- SS-EN-675 - Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method
- SS-EN-ISO-12543-1 - Glass in building - Laminated glass and laminated safety glass - Part 1: Vocabulary and description of component parts (ISO 12543-1:2021)
- SS-EN-ISO-12543-2 - Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2021)
- SS-EN-ISO-12543-2-AM1 - Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass
- SS-EN-ISO-12543-3 - Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2021)
- SS-EN-ISO-12543-4 - Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2021)
- SS-EN-ISO-12543-5 - Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021)
- SS-EN-ISO-12543-6 - Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:2021)
- SS-EN-ISO-14438 - Glass in building - Determination of energy balance value - Calculation method (ISO 14438:2002)
- SS-ISO-9051 - Glass in building - Fire-resistant glazed assemblies containing transparent or translucent glass, for use in building
- UNE-EN-12150-1 - Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description