Document Center List of Standards on Glass Products Bottles, Pots, Jars, See 55.100 Laboratory Glassware, See 71.040.20
ICS Code 81.040.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1048 - Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass
- ASTM-C1294 - Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
- ASTM-C147 - Standard Test Methods for Internal Pressure Strength of Glass Containers
- ASTM-C148 - Standard Test Methods for Polariscopic Examination of Glass Containers
- ASTM-C149 - Standard Test Method for Thermal Shock Resistance of Glass Containers
- ASTM-C1509 - Standard Specification for Beaded Process Glass Pipe and Fittings (Withdrawn 2019)
- ASTM-C1606 - Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
- ASTM-C1639 - Standard Specification for Fabrication Of Cellular Glass Pipe And Tubing Insulation
- ASTM-C1648 - Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
- ASTM-C1649 - Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
- ASTM-C1662 - Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
- ASTM-C224 - Standard Practice for Sampling Glass Containers
- ASTM-C225 - Standard Test Methods for Resistance of Glass Containers to Chemical Attack
- ASTM-C552 - Standard Specification for Cellular Glass Thermal Insulation
- ASTM-C623 - Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
- ASTM-C693 - Standard Test Method for Density of Glass by Buoyancy
- ASTM-D1155 - Standard Test Method for Roundness of Glass Spheres
- ASTM-D116 - Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
- ASTM-E1300 - Standard Practice for Determining Load Resistance of Glass in Buildings
- ASTM-E1478 - Standard Practice for Visual Color Evaluation of Transparent Sheet Materials (Withdrawn 2022)
- ASTM-E1585 - Standard Test Method for Measuring and Calculating Emittance of Architectural Flat Glass Products Using Spectrometric Measurements (Withdrawn 2002)
- ASTM-E1878 - Standard Specification for Laboratory Glass Volumetric Flasks, Special Use
- ASTM-E2240 - Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units (Withdrawn 2015)
- ASTM-E2241 - Standard Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units (Withdrawn 2015)
- ASTM-E424 - Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
- ASTM-E438 - Standard Specification for Glasses in Laboratory Apparatus
- ASTM-F1641 - Standard Test Method for Measuring Penetration Resistance of Security Glazing Using a Pendulum Impactor (Withdrawn 2004)
- ASTM-F2179 - Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers
- ASTM-F2248 - Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
- ASTM-F2813 - Standard Specification for Glass Used as a Horizontal Surface in Desks and Tables
BSI:
- BS-3193 - Specification for thermally toughened glass panels for use in domestic appliances
- BS-6748 - Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware
- BS-857 - Specification for safety glass for land transport
- BS-EN-1595 - Pressure equipment made from borosilicate glass 3.3. General rules for design, manufacture and testing
- BS-EN-ISO-4796-1 - Laboratory glassware. Bottles
- BS-EN-ISO-4796-1-TC - Tracked Changes. Laboratory glassware. Bottles
- BS-EN-ISO-4796-2 - Laboratory glassware. Bottles
- BS-EN-ISO-4796-3 - Laboratory glassware. Bottles
- BS-ISO-13837 - Road vehicles. Safety glazing materials. Method for the determination of solar transmittance
- BS-ISO-13837-TC - Tracked Changes. Road vehicles. Safety glazing materials. Method for the determination of solar transmittance
- BS-ISO-24117 - Tableware, giftware, jewellery and luminaries, made of glass. Glass clarity. Classification and test method
- BS-ISO-3536 - Road vehicles. Safety glazing materials. Vocabulary
- BS-ISO-3537 - Road vehicles. Safety glazing materials. Mechanical tests
- BS-ISO-3917 - Road vehicles. Safety glazing materials. Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
- BS-ISO-614 - Ships and marine technology. Toughened safety glass panes for rectangular windows and side scuttles. Punch method of non-destructive strength testing
- BS-ISO-6486-1 - Ceramic ware, glass ceramic ware and glass dinnerware in contact with food. Release of lead and cadmium
- BS-ISO-7086-1 - Glass hollowware in contact with food. Release of lead and cadmium
- BS-ISO-8113 - Glass containers. Resistance to vertical load. Test method
- PAS-54 - Specification for domestic ceramicware and glassware. Articles intended for contact with foodstuffs, and vases
ISO:
- ISO-13837 - Road vehicles - Safety glazing materials - Method for the determination of solar transmittance
- ISO-24117 - Tableware, giftware, jewellery and luminaries, made of glass - Glass clarity - Classification and test method
- ISO-3536 - Road vehicles - Safety glazing materials - Vocabulary
- ISO-3537 - Road vehicles - Safety glazing materials - Mechanical tests
- ISO-3538 - Road vehicles - Safety glazing materials - Test methods for optical properties
- ISO-3586 - Glass plant, pipeline and fittings - General rules for testing, handling and use
- ISO-3587 - Glass plant, pipeline and fittings - Pipeline and fittings of nominal bore 15 to 150 mm - Compatibility and interchangeability
- ISO-3917 - Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
- ISO-4704 - Glass plant, pipeline and fittings -- Glass plant components
- ISO-4795 - Glass for thermometer bulbs
- ISO-614 - Ships and marine technology - Toughened safety glass panes for rectangular windows and side scuttles - Punch method of non-destructive strength testing
- ISO-6486-1 - Ceramic ware, glass ceramic ware and glass dinnerware in contact with food - Release of lead and cadmium - Part 1: Test method
- ISO-6486-2 - Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food -- Release of lead and cadmium -- Part 2: Permissible limits
- ISO-7086-1 - Glass hollowware in contact with food - Release of lead and cadmium - Part 1: Test method
- ISO-7086-2 - Glass hollowware in contact with food - Release of lead and cadmium - Part 2: Permissible limits
Other SDOs:
- JIS-R-3202 - Float glass and polished plate glass
- SS-EN-1595 - Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing
- SS-EN-2155-7 - Aerospace series - Test methods for transparent materials for aircraft glazing - Part 7: Determination of optical deviation
- SS-ISO-13837 - Road vehicles Safety glazing materials Method for the determination of solar transmittance (ISO 13837:2021, IDT)
- SS-ISO-3536 - Road vehicles - Safety glazing materials - Vocabulary (ISO 3536:2016, IDT)
- SS-ISO-3537 - Road vehicles - Safety glazing materials - Mechanical tests (ISO 3537, IDT)
- SS-ISO-3538 - Road vehicles - Safety glazing materials - Test methods for optical properties (ISO 3538:1997, IDT)
- SS-ISO-3917 - Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering (ISO 3917:2016, IDT)