Document Center List of Standards on Films And Sheets Including Plates
ICS Code 83.140.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1349 - Standard Specification for Architectural Flat Glass Clad Polycarbonate
- ASTM-D1004 - Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
- ASTM-D1204 - Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM-D1239 - Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
- ASTM-D1433 - Method of Rate of Burning and or Extent and Time of Burning of Flexible Thin Plastic Sheeting Supported on a 45-Deg Incline (Withdrawn 1986)
- ASTM-D1434 - Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
- ASTM-D1463 - Specification for Biaxially Oriented Styrene Plastics Sheet (Withdrawn 1987)
- ASTM-D1494 - Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
- ASTM-D1547 - Specification for Extruded Acrylic Plastic Sheet (Withdrawn 1988)
- ASTM-D1593 - Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
- ASTM-D1637 - Method of Test for Tensile Heat Distortion Temperature of Plastic Sheeting (Withdrawn 1988)
- ASTM-D1709 - Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
- ASTM-D1722 - Standard Test Method for Water Miscibility of Water-Soluble Solvents
- ASTM-D1746 - Standard Test Method for Transparency of Plastic Sheeting
- ASTM-D1790 - Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
- ASTM-D1830 - Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
- ASTM-D1894 - Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (Withdrawn 2023)
- ASTM-D1922 - Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
- ASTM-D1938 - Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
- ASTM-D2103 - Standard Specification for Polyethylene Film and Sheeting
- ASTM-D2291 - Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
- ASTM-D2457 - Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM-D2530 - Specification for Nonoriented Propylene Plastic Film (Withdrawn 1987)
- ASTM-D2578 - Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
- ASTM-D2582 - Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
- ASTM-D259 - Specification for Woven Tapes (Withdrawn 1988)
- ASTM-D2673 - Standard Specification for Oriented Polypropylene Film
- ASTM-D2732 - Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film
and Sheeting - ASTM-D2838 - Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
- ASTM-D2902 - Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
- ASTM-D2903 - Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
- ASTM-D2923 - Standard Test Method for Rigidity of Polyolefin Film and Sheeting (Withdrawn 2015)
- ASTM-D3020 - Specification for Polyethylene and Ethylene Copolymer Plastic Sheeting for Pond, Canal and Reservoir Lining (Withdrawn 1996)
- ASTM-D3028 - Standard Test Method for Kinetic Coefficient of Friction of Plastic Solids (Withdrawn 2000)
- ASTM-D3083 - Specification for Flexible Poly (Vinyl Chloride) Plastic Sheeting for Pond, Canal, and Reservoir Lining (Withdrawn 1998)
- ASTM-D3105 - Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
- ASTM-D3144 - Standard Specification for Crosslinked Poly(Vinylidene Fluoride) and Poly(Vinylidene Fluoride) Copolymer Heat-Shrinkable Tubing for Electrical Insulation
- ASTM-D3149 - Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation (Withdrawn 2020)
- ASTM-D3150 - Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
- ASTM-D3308 - Standard Specification for PTFE Resin Skived Tape
- ASTM-D3354 - Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
- ASTM-D3368 - Standard Specification for FEP Sheet and Film
- ASTM-D3369 - Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film (Withdrawn 2006)
- ASTM-D3420 - Standard Test Method for Pendulum Impact Resistance of Plastic Film
- ASTM-D3595 - Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
- ASTM-D3985 - Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
- ASTM-D4204 - Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
- ASTM-D4225 - Standard Specification for Styrene-Butadiene Sheeting (Withdrawn 2009)
- ASTM-D4272 - Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
- ASTM-D4321 - Standard Test Method for Package Yield of Plastic Film (Withdrawn 2024)
- ASTM-D4397 - Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
- ASTM-D4437 - Standard Practice for Nondestructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes
- ASTM-D4551 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
- ASTM-D4635 - Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
- ASTM-D4801 - Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
- ASTM-D4802 - Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
- ASTM-D5047 - Standard Specification for Polyethylene Terephthalate Film and Sheeting
- ASTM-D5420 - Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
- ASTM-D5491 - Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
- ASTM-D5628 - Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
- ASTM-D568 - Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Flexible Plastics in a Vertical Position
- ASTM-D5687 - Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
- ASTM-D6214 - Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods
- ASTM-D6365 - Standard Practice for Nondestructive Testing of Geomembrane Seams Using the Spark Test
- ASTM-D637 - Test Method for Surface Irregularities of Flat Transparent Plastic Sheets (Withdrawn 1995)
- ASTM-D6585 - Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
- ASTM-D6641 - Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
- ASTM-D6864 - Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
- ASTM-D6988 - Standard Guide for Determination of Thickness of Plastic Film Test Specimens
- ASTM-D7067 - Standard Specification for Reinforced White PIB Sheet Used in Roofing Membrane (Withdrawn 2014)
- ASTM-D7192 - Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors
- ASTM-D7193 - Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
- ASTM-D7310 - Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors
- ASTM-D7445 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
- ASTM-D7465 - Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications
- ASTM-D8136 - Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge
- ASTM-D8195 - Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting
- ASTM-D882 - Standard Test Method for Tensile Properties of Thin Plastic Sheeting
- ASTM-D952 - Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
- ASTM-D955 - Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM-E1478 - Standard Practice for Visual Color Evaluation of Transparent Sheet Materials (Withdrawn 2022)
- ASTM-E2945 - Standard Test Method for Film Permeability Determination Using Static Permeability Cells
- ASTM-E424 - Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
- ASTM-E720 - Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
- ASTM-E721 - Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
- ASTM-F1249 - Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
- ASTM-F1306 - Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
- ASTM-F2622 - Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
- ASTM-F3299 - Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P
2 O5 Sensor) - ASTM-F736 - Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
- ASTM-G29 - Standard Practice for Determining Algal Resistance of Polymeric Films
BSI:
- BS-2782-3-M-352E - Method-352E: Determination of Impact Resistance by the Free-Falling Dart Method (Stair
- BS-2782-3-M-352F - Methods of testing plastics. Mechanical properties
- BS-2782-3-M-360A - Methods of testing plastics Part 3: Mechanical properties Method 360A: Determination of tear resistance of plastics film and sheeting by the Elmendorf method
- BS-2782-3-M-360B - Methods of testing plastics. Mechanical properties
- BS-2782-3-M-360C - Methods of testing plastics. Mechanical properties
- BS-2782-5-M-521A - Methods of testing plastics. Optical and colour properties, weathering
- BS-2782-6-M-630A - Methods of testing plastics. Dimensional properties
- BS-2782-6-M-631A - Methods of testing plastics. Dimensional properties
- BS-2782-6-M-632A - Methods of testing plastics. Dimensional properties
- BS-2782-6-M-641A - Methods of testing plastics. Dimensional properties
- BS-2782-6-M-643A - Methods of testing plastics. Dimensional properties
- BS-2782-6-M-643B - Method-643B: Determination of Dimensional Change on Heatingof Film and Sheeting
- BS-2782-8-820A - Methods of testing plastics. Other properties. Determination of water vapour transmission rate (dish method)
- BS-2782-8-M-820A - Methods of testing plastics. Other properties. Determination of water vapour transmission rate (dish method)
- BS-2782-8-M-822A - Methods of testing plastics. Other properties
- BS-2782-8-M-824A - Method-824a: Film and Sheeting. Determination of the Coefficients of Friction
- BS-2782-8-M-825A - Method-825a: Film and Sheeting. Determination of Blocking Resistance
- BS-2782-8-M-826A - Methods of testing plastics. Other properties
- BS-3012 - Specification for low and intermediate density polythene sheet for general purposes
- BS-3757 - Specification for rigid PVC sheet
- BS-4203-1 - Extruded rigid PVC corrugated sheeting. Specification for performance requirements
- BS-4203-2 - Extruded rigid PVC corrugated sheeting. Specification for profiles and dimensions
- BS-7344 - Specification for reeled low density polyethylene film for general purpose application
- BS-7476 - Specification for polyethylene film for covering silage
- BS-7948-1 - Films for wrapping rubber bales.
- BS-EN-1013 - Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings. Requirements and test methods
- BS-EN-1013-1 - Light transmitting profiled plastic sheeting for single skin roofing. General requirements and test methods
- BS-EN-1013-2 - Light transmitting profiled plastic sheeting for single skin roofing. Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP)
- BS-EN-1013-3 - Light transmitting profiled plastic sheeting for single skin roofing. Specific requirements and test methods for sheets of polyvinyl chloride (PVC)
- BS-EN-1013-4 - Light transmitting profiled plastic sheeting for single skin roofing
- BS-EN-1013-5 - Light transmitting profiled plastic sheeting for single skin roofing
- BS-EN-12691 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact
- BS-EN-12691-TC - Tracked Changes. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact
- BS-EN-12730 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to static loading
- BS-EN-13206 - Plastics. Thermoplastic covering films for use in agriculture and horticulture
- BS-EN-13207 - Plastics. Thermoplastic silage films and tubes for use in agriculture
- BS-EN-13207-TC - Tracked Changes. Plastics. Thermoplastic silage films and tubes for use in agriculture
- BS-EN-13583 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of hail resistance
- BS-EN-13655 - Plastics. Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture
- BS-EN-13677-2 - Reinforced thermoplastic moulding compounds. Specification for GMT
- BS-EN-13677-3 - Reinforced thermoplastic moulding compounds. Specification for GMT
- BS-EN-14932 - Plastics. Thermoplastic stretch films for wrapping silage bales
- BS-EN-15354 - Plastics. Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P). Characterization and designation
- BS-EN-15752-1 - Glass in building. Adhesive backed polymeric film
- BS-EN-15755-1 - Glass in building. Adhesive backed polymeric filmed glass
- BS-EN-15836-1 - Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools
- BS-EN-15836-2 - Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools
- BS-EN-16153 - Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
- BS-EN-17033 - Plastics. Biodegradable mulch films for use in agriculture and horticulture. Requirements and test methods
- BS-EN-17098-1 - Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation
- BS-EN-17098-2 - Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation
- BS-EN-17104 - Thermoplastics rigid protective wallcovering panels for internal use in buildings. Performance characteristics
- BS-EN-17679 - Plastics. Plastic films. Determination of tear resistance using a trapezoidal test specimen with incision
- BS-EN-1848-2 - Flexible sheets for waterproofing. Determination of length, width and straightness
- BS-EN-1850-2 - Flexible sheets for waterproofing. Determination of visible defects
- BS-EN-1928 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness
- BS-EN-1931 - Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of water vapour transmission properties
- BS-EN-263 - Sanitary appliances. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
- BS-EN-ISO-11501 - Plastics. Film and sheeting. Determination of dimensional change on heating
- BS-EN-ISO-11502 - Plastics. Film and sheeting. Determination of blocking resistance
- BS-EN-ISO-11502-TC - Tracked Changes. Plastics. Film and sheeting. Determination of blocking resistance
- BS-EN-ISO-11833-1 - Plastics. Unplasticized poly(vinyl chloride) sheets
- BS-EN-ISO-11833-2 - Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics
- BS-EN-ISO-11963 - Plastics. Polycarbonate sheets. Types, dimensions and characteristics
- BS-EN-ISO-12017-TC - Tracked Changes. Plastics. Poly(methyl methacrylate) double- and triple-skin sheets. Test methods
- BS-EN-ISO-14616 - Plastics. Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures. Determination of the shrinkage stress and contraction stress
- BS-EN-ISO-14631-TC - Tracked Changes. Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods
- BS-EN-ISO-14632-TC - Tracked Changes. Extruded sheets of polyethylene (PE-HD). Requirements and test methods
- BS-EN-ISO-15013 - Plastics. Extruded sheets of polypropylene (PP). Requirements and test methods
- BS-EN-ISO-15013-TC - Tracked Changes. Plastics. Extruded sheets of polypropylene (PP). Requirements and test methods
- BS-EN-ISO-15015 - Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods
- BS-EN-ISO-15527 - Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
- BS-EN-ISO-15527-TC - Tracked Changes. Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
- BS-EN-ISO-527-3-TC - Tracked Changes. Plastics. Determination of tensile properties
- BS-EN-ISO-6179 - Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique)
- BS-EN-ISO-6179-TC - Tracked Changes. Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique)
- BS-EN-ISO-6383-1 - Plastics. Film and sheeting. Determination of tear resistance
- BS-EN-ISO-6383-1-TC - Tracked Changes. Plastics. Film and sheeting. Determination of tear resistance
- BS-EN-ISO-7823-1 - Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics
- BS-EN-ISO-7823-3 - Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics
- BS-EN-ISO-7823-3-TC - Tracked Changes. Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics
- BS-ISO-11833-1 - Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristics. Sheets of thickness not less than 1 mm
- BS-ISO-13636 - Plastics. Film and sheeting. Non-oriented poly(ethylene terephthalate) (PET) sheets
- BS-ISO-15014 - Plastics. Extruded sheets of poly(vinylidene fluoride) (PVDF). Requirements and test methods
- BS-ISO-15105-1 - Plastics. Film and sheeting. Determination of gas-transmission rate
- BS-ISO-15106-4 - Plastics. Film and sheeting. Determination of water vapour transmission rate
- BS-ISO-15106-5 - Plastics. Film and sheeting. Determination of water vapour transmission rate
- BS-ISO-15106-6 - Plastics. Film and sheeting. Determination of water vapour transmission rate
- BS-ISO-15106-7 - Plastics. Film and sheeting. Determination of water vapour transmission rate
- BS-ISO-15527 - Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
- BS-ISO-17555-TC - Tracked Changes. Plastics. Film and sheeting. Biaxially oriented polypropylene (PP) films
- BS-ISO-17557 - Plastics. Film and sheeting. Cast polypropylene (PP) films
- BS-ISO-23517 - Plastics. Soil biodegradable materials for mulch films for use in agriculture and horticulture. Requirements and test methods regarding biodegradation, ecotoxicity and control of constituents
- BS-ISO-23559 - Plastics. Film and sheeting. Guidance on the testing of thermoplastic films
- BS-ISO-2528 - Sheet materials. Determination of water vapour transmission rate (WVTR). Gravimetric (dish) method
- BS-ISO-7765-2 - Plastics film and sheeting. Determination of impact resistance by the free-falling dart method
- BS-ISO-7765-2-TC - Tracked Changes. Plastics film and sheeting. Determination of impact resistance by the free-falling dart method
- BS-ISO-8296 - Plastics. Film and sheeting. Determination of wetting tension
- PAS-1008 - Specification for the performance and testing of a single-use flexitank
- PAS-1008-TC - Tracked Changes. Specification for the performance and testing of a single-use flexitank
- PD-CEN-17219 - Plastics. Biodegradable thermoplastic mulch films for use in agriculture and horticulture. Guide for the quantification of alteration of films
ISO:
- ISO-11501 - Plastics - Film and sheeting - Determination of dimensional change on heating
- ISO-11502 - Plastics - Film and sheeting - Determination of blocking resistance
- ISO-11833-1 - Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm
- ISO-11833-2 - Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm
- ISO-11963 - Plastics - Polycarbonate sheets - Types, dimensions and characteristics
- ISO-12017 - Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods
- ISO-13636 - Plastics - Film and sheeting - Non-oriented poly(ethylene terephthalate) (PET) sheets
- ISO-14616 - Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress
- ISO-14631 - Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods
- ISO-14632 - Extruded sheets of polyethylene (PE-HD) - Requirements and test methods
- ISO-15013 - Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods
- ISO-15014 - Plastics - Extruded sheets of poly(vinylidene fluoride) (PVDF) - Requirements and test methods
- ISO-15015 - Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods
- ISO-15105-1 - Plastics - Film and sheeting - Determination of gas-transmission rate - Part 1: Differential-pressure methods
- ISO-15105-2 - Plastics - Film and sheeting - Determination of gas-transmission rate - Part 2: Equal-pressure method
- ISO-15106-1 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method
- ISO-15106-2 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method
- ISO-15106-3 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method
- ISO-15106-4 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 4: Gas-chromatographic detection sensor method
- ISO-15106-5 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 5: Pressure sensor method
- ISO-15106-6 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 6: Atmospheric pressure ionization mass spectrometer method
- ISO-15106-7 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 7: Calcium corrosion method
- ISO-15527 - Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
- ISO-15987 - Plastics - Film and sheeting - Biaxially oriented polyamide (nylon) films
- ISO-15988 - Plastics - Film and sheeting - Biaxially oriented poly(ethylene terephthalate) (PET) films
- ISO-15989 - Plastics - Film and sheeting - Measurement of water-contact angle of corona-treated films
- ISO-17555 - Plastics - Film and sheeting - Biaxially oriented polypropylene (PP) films
- ISO-17557 - Plastics -- Film and sheeting -- Cast polypropylene (PP) films
- ISO-23517 - Plastics - Soil biodegradable materials for mulch films for use in agriculture and horticulture - Requirements and test methods regarding biodegradation, ecotoxicity and control of constituentsRequirements and test methods regarding biodegradation, ecotoxicity and control of constituents
- ISO-23559 - Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
- ISO-2556 - Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method
- ISO-4591 - Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
- ISO-4592 - Plastics - Film and sheeting - Determination of length and width
- ISO-4593 - Plastics - Film and sheeting - Determination of thickness by mechanical scanning
- ISO-527-3 - Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
- ISO-6179 - Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)
- ISO-6383-1 - Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method
- ISO-6383-2 - Plastics - Film and sheeting - Determination of tear resistance - Part 2 : Elmendorf method
- ISO-7765-1 - Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods
- ISO-7765-2 - Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test
- ISO-7823-1 - Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets
- ISO-7823-2 - Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets
- ISO-7823-3 - Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets
- ISO-8295 - Plastics - Film and sheeting - Determination of coefficients of friction
- ISO-8296 - Plastics -- Film and sheeting -- Determination of wetting tension
- ISO-8570 - Plastics - Film and sheeting - Determination of cold-crack temperature
Other SDOs:
- CEN-17219 - Plastics - Biodegradable thermoplastic mulch films for use in agriculture and horticulture - Guide for the quantification of alteration of films
- DIN-53362 - Determining the Flexural Rigidity of Plastic Film & Woven Textile Fabrics With or With
- DIN-53363 - Determining the Tear Resistance of Plastic Film & Sheeting by the Trouser Tear Method
- DIN-EN-14932 - Plastics - Stretch Thermoplastic Films for Wrapping Bales - Requirements & Test Metho
- DIN-EN-263 - Sanitary Appliances - Crosslinked Cast Acrylic Sheets for Baths & Shower Trays for Dom
- DIN-EN-ISO-11501 - Plastics - Film & Sheeting, Determination of Dimensional Change on Heating
- DIN-EN-ISO-11502 - Plastics - Film & Sheeting, Determination of Blocking Resistance
- DIN-EN-ISO-11833-2 - Part 2: Sheets of Thickness Less Than 1 mm, Plastics - Unplasticized Poly(Vinyl Chlori
- DIN-EN-ISO-14616 - Plastics, Heatshrinkable Films of Polyethylene, Ethylene Copolymers and Their Mixtures,
- DIN-EN-ISO-15106-1 - Part 1: Humidity Detection Sensor Method, Plastics - Film &Sheating, Determination Of
- DIN-EN-ISO-15106-2 - Part 2: Infrared Detection Sensor Method, Plastics - Film & Sheeting, Determination O
- DIN-EN-ISO-15106-3 - Part 3: Electrolytic Detection Sensor Method, Plastics - Film & Sheeting, Determinatio
- DIN-EN-ISO-6383-1 - Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method
- DIN-EN-ISO-6383-2 - Part 2: Elmendorf Method, Plastics - Film & Sheeting, Determination of Tear Resistance
- DIN-EN-ISO-7765-1 - Part 1: Staircase Methods, Plastics Film & Sheeting, Determination of Impact Resistanc
- DIN-EN-ISO-7823-1 - Part 1: Cast Sheets, Plastics, Poly(Methyl Methacrylate) Sheets - Types, Dimensions &
- DIN-EN-ISO-7823-3 - Part 3: Continuous Cast Sheets, Plastics - Poly(Methyl Methacrylate) Sheets - Types, D
- DIN-EN-ISO-8295 - Plastics - Film & Sheeting, Determination of the Coefficients of Friction
- DIN-ISO-8296 - Plastics - Film & Sheeting - Determination of Wetting Tension
- EN-1013 - Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
- EN-12691 - Flexible Sheets for Waterproofing, Bitumen, Plastic & Rubber Sheets for Roof Waterproo
- EN-13206 - Plastics - Thermoplastic covering films for use in agriculture and horticulture
- EN-14932 - Plastics - Stretch Thermoplastic Films for Wrapping Bales - Requirements & Test Metho
- EN-15752-1 - Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements
- EN-15755-1 - Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and requirements
- EN-15836-1 - Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
- EN-15836-2 - Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
- EN-16153 - Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
- EN-16240 - Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
- EN-17033 - Plastics. Biodegradable mulch films for use in agriculture and horticulture. Requirements and test methods
- EN-263 - Sanitary Appliances - Crosslinked Cast Acrylic Sheets for Baths & Shower Trays for Dom
- EN-ISO-11501 - Plastics - Film & Sheeting, Determination of Dimensional Change on Heating
- EN-ISO-11502 - Plastics - Film & Sheeting, Determination of Blocking Resistance
- EN-ISO-11833-1 - Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)
- EN-ISO-11833-2 - Part 2: Sheets of Thickness Less Than 1 mm, Plastics - Unplasticized Poly(Vinyl Chlori
- EN-ISO-11963 - Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
- EN-ISO-14616 - Plastics, Heatshrinkable Films of Polyethylene, Ethylene Copolymers & Their Mixtures
- EN-ISO-15013 - Plastics, Extruded Sheets of Polypropylene (Pp), Requirements & Test Methods
- EN-ISO-15015 - Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods
- EN-ISO-15106-1 - Part 1: Humidity Detection Sensor Method, Plastics - Film & Sheeting, Determination O
- EN-ISO-15106-2 - Part 2: Infrared Detection Sensor Method, Plastics - Film & Sheeting, Determination O
- EN-ISO-15106-3 - Part 3: Electrolytic Detection Sensor Method, Plastics - Film & Sheeting, Determinatio
- EN-ISO-15527 - Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2010)
- EN-ISO-6179 - Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)
- EN-ISO-6383-1 - Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method
- EN-ISO-6383-2 - Part 2: Elmendorf Method, Plastics - Film & Sheeting, Determination of Tear Resistance
- EN-ISO-7765-1 - Part 1: Staircase Methods, Plastics Film & Sheeting, Determination of Impact Resistanc
- EN-ISO-7823-3 - Part 3: Continuous Cast Sheets, Plastics - Poly(Methyl Methacrylate) Sheets - Types, D
- EN-ISO-8295 - Plastics - Film & Sheeting, Determination of the Coefficients of Friction
- JIS-A-5759 - Adhesive films for glazings
- JIS-A-6111 - House wrapping sheets
- JIS-A-6930 - Plastic films vapour barrier for residential use
- JIS-K-6781 - Polyethylene films for agriculture
- JIS-K-7128-3 - Plastics -- Film and sheeting -- Determination of tear resistance -- Part 3: Right angled tear method
- SIS-CEN/TR-17219 - Plastics - Biodegradable thermoplastic mulch films for use in agriculture and horticulture - Guide for the quantification of alteration of films
- SIS-CEN/TS-15354 - Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation
- SIS-CEN/TS-16892 - Plastics - Welding of thermoplastics - Specification of welding procedures
- SS-EN-1013 - Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
- SS-EN-1013-1 - Light transmitting profiled plastic sheeting for single skin roofing - Part 1: General requirementsand test methods
- SS-EN-1013-2 - Light transmitting profiled plastic sheeting for single skin roofing - Part 2: Specific requirements and test methods for sheets of glass fibre reinforced polyester (GRP)
- SS-EN-1013-3 - Light transmitting profiled plastic sheeting for single skin roofing - Part 3: Specific requirements and test methods for sheets of polyvinyl chloride (PVC)
- SS-EN-1013-4 - Light transmitting profiled plastic sheeting for single skin roofing - Part 4: Specific requirements, test methods and performance of polycarbonate (PC) sheets
- SS-EN-1013-5 - Light transmitting profiled plastic sheeting for single skin roofing - Part 5: Specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets
- SS-EN-12575 - Plastics - Thermoset moulding compounds - Determination of the degrees of fibre wet out in SMC
- SS-EN-12576 - Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMCand DMC
- SS-EN-13206 - Plastics - Thermoplastic covering films for use in agriculture and horticulture
- SS-EN-13207 - Plastics - Thermoplastic silage films and tubes for use in agriculture
- SS-EN-13655 - Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture
- SS-EN-14932 - Plastics - Thermoplastic stretch films for wrapping silage bales
- SS-EN-15354 - Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Characterization and designation
- SS-EN-15752-1 - Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements
- SS-EN-15755-1 - Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and requirements
- SS-EN-15836-1 - Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
- SS-EN-15836-2 - Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
- SS-EN-16153 - Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
- SS-EN-16240 - Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
- SS-EN-17033 - Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods
- SS-EN-17098-1 - Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films
- SS-EN-17098-2 - Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique
- SS-EN-17679 - Plastics - Plastic films - Determination of tear resistance using a trapezoidal test specimen with incision
- SS-EN-263 - Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
- SS-EN-ISO-11501 - Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995)
- SS-EN-ISO-11502 - Plastics - Film and sheeting - Determination of blocking resistance (ISO 11502:2018)
- SS-EN-ISO-11833-1 - Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019)
- SS-EN-ISO-11833-2 - Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)
- SS-EN-ISO-11963 - Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2019)
- SS-EN-ISO-12017 - Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:2021)
- SS-EN-ISO-13000-1 - Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2021)
- SS-EN-ISO-13000-2 - Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
- SS-EN-ISO-14616 - Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress (ISO 14616:1997)
- SS-EN-ISO-14631 - Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:2021)
- SS-EN-ISO-14632 - Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:2021)
- SS-EN-ISO-15013 - Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2022)
- SS-EN-ISO-15015 - Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)
- SS-EN-ISO-15106-1 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method (ISO 15106-1:2003)
- SS-EN-ISO-15106-2 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003)
- SS-EN-ISO-15106-3 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method (ISO 15106-3:2003)
- SS-EN-ISO-15527 - Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2022)
- SS-EN-ISO-2556 - Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974)
- SS-EN-ISO-527-3 - Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018)
- SS-EN-ISO-6179 - Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017)
- SS-EN-ISO-6383-1 - Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method (ISO 6383-1:2015)
- SS-EN-ISO-6383-2 - Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983)
- SS-EN-ISO-7765-1 - Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988)
- SS-EN-ISO-7823-1 - Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)
- SS-EN-ISO-7823-2 - Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Melt-calendered extruded sheets (ISO 7823-2:1996)
- SS-EN-ISO-7823-3 - Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2021)
- SS-EN-ISO-8295 - Plastics - Film and sheeting - Determination of the coefficients of friction (ISO 8295:1995)
- SS-ISO-11501 - Plastics - Film and sheeting - Determination of dimensional change on heating
- SS-ISO-11502 - Plastics - Film and sheeting - Determination of blocking resistance
- SS-ISO-13636 - Plastics - Film and sheeting - Non-oriented poly(ethylene terephthalate) (PET) sheets (ISO 13636:2012, IDT)
- SS-ISO-15105-1 - Plastics - Film and sheeting - Determination of gas-transmission rate - Part 1: Differential-pressure methods (ISO 15105-1:2007, IDT)
- SS-ISO-15105-2 - Plastics - Film and sheeting - Determination of gas-transmission rate - Part 2: Equal-pressure method
- SS-ISO-15106-1 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method
- SS-ISO-15106-2 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method
- SS-ISO-15106-3 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method
- SS-ISO-15106-4 - Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 4: Gas-chromatographic detection sensor method (ISO 15106-4:2008, IDT)
- SS-ISO-15527 - Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2010, IDT)
- SS-ISO-15987 - Plastics - Film and sheeting - Biaxially oriented polyamide (nylon) films
- SS-ISO-15988 - Plastics - Film and sheeting - Biaxially oriented poly(ethylene terephthalate) (PET) films
- SS-ISO-15989 - Plastics - Films and sheeting - Measurement of water-contact angle of corona-treated films (ISO 15989:2004, IDT)
- SS-ISO-17555 - Plastics Film and sheeting Biaxially oriented polypropylene (PP) films (ISO 17555:2021, IDT)
- SS-ISO-17557 - Plastics - Film and sheeting - Cast polypropylene (PP) films
- SS-ISO-22241-2 - Diesel engines - NOx reduction agent AUS 32 - Part 2: Test methods (ISO 22241-2:2019, IDT)
- SS-ISO-23559 - Plastics - Film and sheeting - Guidance on the testing of thermoplastic films (ISO 23559:2011, IDT)
- SS-ISO-6179 - Rubber, vulcanized and thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)
- SS-ISO-8295 - Plastics - Film and sheeting - Determination of coefficients of friction
- SS-ISO-8296 - Plastics - Film and sheeting - Determination of wetting tension
- UNE-EN-ISO-6383-1 - Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method