Document Center List of Standards on Equipment For The Rubber And Plastics Industries
ICS Code 83.200
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D647 - Practice for Design of Molds for Test Specimens of Plastic Molding Materials (Withdrawn 1994)
- ASTM-D957 - Standard Practice for Determining Surface Temperature of Molds for Plastics
BSI:
- BS-7825-2 - Calibration of rubber and plastics test equipment
- BS-7825-3.1 - Calibration of rubber and plastics test equipment. Calibration schedules
- BS-7825-3.10 - Calibration of rubber and plastics test equipment. Calibration schedules
- BS-7825-3.2 - Calibration of rubber and plastics test equipment. Calibration schedules
- BS-7825-3.3 - Calibration of rubber and plastics test equipment. Calibration schedules
- BS-7825-3.4 - Calibration of rubber and plastics test equipment. Calibration schedules
- BS-7825-3.5 - Calibration of rubber and plastics test equipment. Calibration schedules. Optical and weathering properties
- BS-7825-3.6 - Calibration of rubber and plastics test equipment. Calibration schedules
- BS-7825-3.7 - Calibration of rubber and plastics test equipment. Calibration schedules. Rheological properties
- BS-7825-3.8 - Calibration of rubber and plastics test equipment. Calibration schedules. Degradation and environmental properties
- BS-7825-3.9 - Calibration of rubber and plastics test equipment. Calibration schedules
- BS-EN-1034-13 - Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines
- BS-EN-1114-1 - Plastics and rubber machines. Extruders and extrusion lines
- BS-EN-1114-2 - Plastics and rubber machines. Extruders and extrusion lines. Safety requirements for die face pelletisers
- BS-EN-1114-3 - Plastics and rubber machines. Extruders and extrusion lines
- BS-EN-12012-1 - Plastics and rubber machines. Size reduction machines
- BS-EN-12012-2 - Rubber and plastics machines. Size reduction machines
- BS-EN-12012-3 - Rubber and plastics machines. Size reduction machines. Safety requirements for shredders
- BS-EN-12012-4 - Plastics and rubber machines. Size reduction machines
- BS-EN-12013 - Plastics and rubber machines. Internal mixers. Safety requirements
- BS-EN-12013-TC - Tracked Changes. Plastics and rubber machines. Internal mixers. Safety requirements
- BS-EN-12301 - Plastics and rubber machines. Calenders. Safety requirements
- BS-EN-12409 - Plastics and rubber machines. Thermoforming machines. Safety requirements
- BS-EN-13418 - Plastics and rubber machines. Winding machines for film or sheet. Safety requirements
- BS-EN-1417 - Plastics and rubber machines. Two-roll mills. Safety requirements
- BS-EN-1417-TC - Tracked Changes. Plastics and rubber machines. Two-roll mills. Safety requirements
- BS-EN-14886 - Plastics and rubber machines. Bandknife cutting machines for block foams. Safety requirements
- BS-EN-15067 - Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements
- BS-EN-1612 - Plastics and rubber machines. Reaction moulding machines and plants. Safety requirements
- BS-EN-1612-1 - Plastics and rubber machines. Reaction moulding machines
- BS-EN-1612-2 - Plastics and rubber machines. Reaction moulding machines. Safety requirements for reaction moulding plant
- BS-EN-16474 - Plastics and rubber machines. Tyre curing machines. Safety requirements
- BS-EN-201 - Plastics and rubber machines. Injection moulding machines. Safety requirements
- BS-EN-289 - Plastics and rubber machines. Compression moulding machines and transfer moulding machines. Safety requirements
- BS-EN-422 - Plastics and rubber machines. Blow moulding machines. Safety requirements
- BS-EN-ISO-13802 - Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
- BS-EN-ISO-20430 - Plastics and rubber machines. Injection moulding machines. Safety requirements
- BS-EN-ISO-23582-1 - Plastics and rubber machines. Clamping systems
- BS-EN-ISO-23582-1-TC - Tracked Changes. Plastics and rubber machines. Clamping systems
- BS-EN-ISO-483 - Plastics. Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at constant value
- BS-ISO-13802 - Plastics, Verification of Pendulum Impact-Testing Machines, Charpy, Izod & Tensile Im
- BS-ISO-5893 - Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification
ISO:
- ISO-13802 - Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
- ISO-20430 - Plastics and rubber machines - Injection moulding machines - Safety requirements
- ISO-23582-1 - Plastics and rubber machines - Clamping systems - Part 1: Safety requirements for magnetic clamping systems
- ISO-483 - Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
- ISO-5893 - Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification
- ISO-5893-AM1 - - Amendment 1
Other SDOs:
- DIN-EN-12012-2 - Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers; German version EN 12012-2:2001+A2:2008
- DIN-EN-12012-4 - Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators; German version EN 12012-4:2006+A1:2008
- DIN-EN-13418 - Plastics and rubber machines - Winding machines for film or sheet - Safety requirements; German version EN 13418:2013
- DIN-EN-201/A2 - Amendment 2 for Din-En-201, Plastics & Rubber Machines, Injection Moulding Machines -
- DIN-EN-289 - Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements; German version EN 289:2014
- DIN-EN-ISO-13802 - Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
- DIN-EN-ISO-483 - Plastics - Small Enclosures for Conditioning & Testing Using Aqueous Solutions To Main
- EN-1114-1 - Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
- EN-1114-2 - Part 2: Safety Requirements for Die Face Pelletisers, Plastics & Rubber Machines - Ext
- EN-1114-3 - Part 3: Safety Requirements for Haul-Offs, Plastics & Rubber Machines - Extruders & Ex
- EN-12012-1 - Part 1: Safety Requirements for Blade Granulators, Plastics & Rubber Machines - Size
- EN-12012-2 - Part 2: Safety Requirements for Strand Pelletisers, Plastics & Rubber Machines - Size
- EN-12012-3 - Part 3: Safety Requirements for Shredders, Plastics & Rubber Machines - Size Reduction
- EN-12012-4 - Part 4: Safety Requirements for Agglomerators, Plastics & Rubber Machines - Size Reduc
- EN-12301 - Plastics & Rubber Machines - Calenders - Safety Requirements
- EN-12409 - Plastics & Rubber Machines - Thermoforming Machines - Safety Requirments
- EN-13418 - Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
- EN-1417 - Plastics and rubber machines - Two-roll mills - Safety requirements
- EN-14886 - Plastics & Rubber Machines - Bandknife Cutting Machines for Block Foams - Safety Requ
- EN-15067 - Plastics & Rubber Machines - Film Converting Machines for Bags & Sacks - Safety Requir
- EN-1612-1 - Rubber & Plastics Machines, Reaction Moulding Machines, Safety Requirements for Meteri
- EN-1612-2 - Part 2: Safety Requirements for Reaction Moulding Plant, Rubber & Plastics Machines -
- EN-16474 - Plastics and rubber machines - Tyre curing machines - Safety requirements
- EN-201 - Plastics & Rubber Machines - Injection Moulding Machines - Safety Requirements
- EN-289 - Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
- EN-422 - Plastics & Rubber Machines - Blow Moulding Machines - Safety Requirements
- EN-ISO-13802 - Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
- EN-ISO-483 - Plastics - Small Enclosures for Conditioning & Testing Using Aqueous Solutions To Main
- SS-EN-1114-1 - Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
- SS-EN-1114-2 - Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers
- SS-EN-1114-3 - Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
- SS-EN-12012-1 - Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders
- SS-EN-12012-2 - Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
- SS-EN-12012-2-AM1 - Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
- SS-EN-12012-3 - Plastics rubber machines - Size reduction machines - Part 3: Safety requirements for shredders
- SS-EN-12012-4 - Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
- SS-EN-12013 - Plastics and rubber machines - Internal mixers - Safety requirements
- SS-EN-12301 - Plastics and rubber machines - Calenders - Safety requirements
- SS-EN-12409 - Plastics and rubber machines - Thermoforming machines - Safety requirements
- SS-EN-13418 - Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
- SS-EN-1417 - Plastics and rubber machines - Two-roll mills - Safety requirements
- SS-EN-14886 - Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements
- SS-EN-15067 - Plastic and rubber machines - Film converting machines for bags and sacks - Safety requirements
- SS-EN-1612 - Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements
- SS-EN-1612-1 - Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units
- SS-EN-1612-2 - Plastics and rubber machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant
- SS-EN-16474 - Plastics and rubber machines - Tyre curing machines - Safety requirements
- SS-EN-201 - Plastics and rubber machines - Injection moulding machines - Safety requirements
- SS-EN-201-AM1 - Rubber and plastics machines - Injection moulding machines - Safety requirements
- SS-EN-201-AM2 - Plastics and rubber machines - Injection moulding machines - Safety requirements
- SS-EN-289 - Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
- SS-EN-422 - Plastics and rubber machines - Blow moulding machines - Safety requirements
- SS-EN-ISO-13802 - Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015)
- SS-EN-ISO-20430 - Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020)
- SS-EN-ISO-23582-1 - Plastics and rubber machines - Clamping systems - Part 1: Safety requirements for magnetic clamping systems (ISO 23582-1:2023)
- SS-EN-ISO-483 - Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005)
- SS-ISO-10072 - Tools for moulding - Sprue bushes - Dimensions (ISO 10072:2004, IDT)
- SS-ISO-5893-AM1 - Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification - Amendment 1 (ISO 5893:2019/Amd 1:2020, IDT)
- SS-ISO-8405 - Tools for moulding Ejector sleeves with cylindrical head Basic series for general purposes (ISO 8405:2023, IDT)