Document Center List of Standards on Inks. Printing Inks Materials For Graphic Technology, See 37.100.20
ICS Code 87.080
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D1316 - Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
- ASTM-D2066 - Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
- ASTM-D2067 - Standard Test Method for Coarse Particles in Printing Ink Dispersions
- ASTM-D3424 - Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter (Withdrawn 2020)
- ASTM-D4040 - Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
- ASTM-D4361 - Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter (Withdrawn 2019)
- ASTM-D4713 - Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
- ASTM-D4942 - Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
- ASTM-D5010 - Standard Guide for Testing Printing Inks and Related Materials (Withdrawn 2017)
- ASTM-D5328 - Standard Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °C (Withdrawn 2001)
- ASTM-D5597 - Practice for the Preparation of Oil-Based Ink Resin Solutions Using a Hot Oil Bath (Withdrawn 1999)
- ASTM-D5725 - Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester (Withdrawn 2010)
- ASTM-D5909 - Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance
- ASTM-D5958 - Standard Practices for Preparation of Oil-Based Ink Resin Solutions
- ASTM-D6073 - Standard Test Method for Relative Setting of Heatset Printing Inks
- ASTM-D6165 - Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials (Withdrawn 2016)
- ASTM-D6419 - Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
- ASTM-D6487 - Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press
- ASTM-D6488 - Standard Terminology Relating to Print Problems
- ASTM-D6531 - Standard Practice for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
- ASTM-D6688 - Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique
- ASTM-D6846 - Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage
- ASTM-D6989 - Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions
- ASTM-D7188 - Standard Terminology for Printing Inks, Materials, and Processes
- ASTM-D7189 - Standard Test Method for Relative Mileage of News Ink on Newsprint
- ASTM-D7244 - Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings
- ASTM-D7271 - Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
- ASTM-D7514 - Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
- ASTM-D7680 - Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester
- ASTM-D7734 - Standard Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method
- ASTM-D7836 - Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials
- ASTM-D7867 - Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
- ASTM-D8020 - Standard Test Method for Freeze-Thaw Viscosity Stability of Water-Based Inks and Ink Vehicles
- ASTM-E1422 - Standard Guide for Test Methods for Forensic Writing Ink Comparison (Withdrawn 2014)
- ASTM-E1789 - Standard Guide for Writing Ink Identification (Withdrawn 2013)
- ASTM-E2389 - Standard Guide for Examination of Documents Produced with Liquid Ink Jet Technology (Withdrawn 2014)
- ASTM-F1944 - Standard Practice for Determining the Quality of the Text, Line- and Solid-Fill Output Produced by Ink Jet Printers (Withdrawn 2016)
- ASTM-F1945 - Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting
- ASTM-F1946 - Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight (Withdrawn 2016)
- ASTM-F2035 - Standard Practice for Measuring the Dark Stability of Ink Jet Prints
- ASTM-F2037 - Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments
- ASTM-F2250 - Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
- ASTM-F2252 - Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
- ASTM-F2292 - Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods—Drip, Spray, Submersion and Rub (Withdrawn 2016)
- ASTM-F2293 - Standard Practice for Determining the Stain Resistance of Images Produced by Ink Jet Printers (Withdrawn 2016)
- ASTM-F2357 - Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool "RCA" Abrader (Withdrawn 2017)
- ASTM-F2406 - Standard Practice for Determining Yield of Solid Ink Sticks (Withdrawn 2020)
- ASTM-F3152 - Standard Test Method for Determining Abrasion Resistance of Inks and Coatings on Substrates Using Dry or Wet Abrasive Medium (Withdrawn 2023)
- ASTM-F843 - Standard Test Method for Assessing the Color Strength and Dispersibility of Alkali Blue Pigment in Hot Melt Carbon Copy Paper Ink (Withdrawn 2015)
BSI:
- BS-3110 - Methods for measuring the rub resistance of print
- BS-3484 - Specification for blue-black record inks
- BS-3484-1 - Record inks. Specification for blue-black inks
- BS-3484-2 - Record inks
- BS-4069 - Specification for magnetic flaw detection inks and powders
- BS-4321 - Methods of test for printing inks (resistance of prints to various physical and chemical agents)
- BS-IEC-62899-202 - Printed electronics
- BS-IEC-62899-202-5 - Printed electronics
- BS-IEC-62899-202-6 - Printed electronics
- BS-IEC-62899-202-8 - Printed electronics
- BS-IEC-62899-202-9 - Printed electronics
- BS-IEC-62899-203 - Printed electronics
- BS-IEC-62899-203-TC - Tracked Changes. Printed electronics
- BS-ISO-11798 - Information and documentation. Permanence and durability of writing, printing and copying on paper. Requirements and test methods
- BS-ISO-12040 - Graphic technology. Prints and printing inks. Assessment of light fastness using filtered xenon arc light
- BS-ISO-12632 - Graphic technology. Ink, paper and labels. Requirements on hot alkali penetration and resistance
- BS-ISO-12634 - Graphic technology. Determination of tack of paste inks and vehicles by a rotary tackmeter
- BS-ISO-12644 - Graphic technology. Determination of rheological properties of paste inks and vehicles by the falling rod viscometer
- BS-ISO-23498 - Graphic technology. Visual opacity of printed white ink
- BS-ISO-23498-TC - Tracked Changes. Graphic technology. Visual opacity of printed white ink
- BS-ISO-2834 - Graphic technology. Test print preparation for offset and letterpress inks
- BS-ISO-2834-1 - Graphic technology. Laboratory preparation of test prints
- BS-ISO-2834-2 - Graphic technology. Laboratory preparation of test prints
- BS-ISO-2834-2-TC - Tracked Changes. Graphic technology. Laboratory preparation of test prints
- BS-ISO-2834-3 - Graphic technology. Laboratory preparation of test prints
- BS-ISO-2836 - Graphic technology. Prints and printing inks. Assessment of resistance of prints to various agents
- BS-ISO-2837 - Graphic Technology, Prints & Printing Inks, Assessment of Resistance To Solvents
- BS-ISO-2846-1 - Graphic technology. Colour and transparency of printing ink sets for four-colour printing
- BS-ISO-2846-1-TC - Tracked Changes. Graphic technology. Colour and transparency of printing ink sets for four-colour printing
- BS-ISO-2846-2 - Graphic technology. Colour and transparency of printing ink sets for four-colour printing
- BS-ISO-2846-4 - Graphic technology. Colour and transparency of ink sets for four-colour-printing
- BS-ISO-2846-5 - Graphic technology. Colour and transparency of printing ink sets for four-colour printing
- PD-ISO-12705 - Graphic technology. Laboratory test method for chemical ghosting in lithography
- PD-ISO-19857 - Paper, board and printing inks. Printability. Laboratory test method for offset ink setting
IEC:
- IEC-62899-202 - Printed electronics - Part 202: Materials - Conductive ink
- IEC-62899-202-3 - Printed electronics - Part 202-3: Materials - Conductive ink - Measurement of sheet resistance of conductive films - Contactless method
- IEC-62899-202-4 - Printed electronics - Part 202-4: Materials - Conductive ink - Measurement methods for properties of stretchable printed layers (conductive and insulating)
- IEC-62899-202-5 - Printed electronics - Part 202-5: Materials - Conductive ink - Mechanical bending test of a printed conductive layer on an insulating substrate
- IEC-62899-202-6 - Printed electronics - Part 202-6: Materials - Conductive ink - Measurement method for resistance changes under high temperature and humidity - Printed conductive layer on a flexible substrate
- IEC-62899-202-8 - Printed electronics - Part 202-8: Materials - Conductive ink - Measurement of difference in resistance of printing direction of conductive film fabricated with wire-shaped materials
- IEC-62899-202-9 - Printed electronics - Part 202-9: Materials - Conductive ink - Printed patterns for mechanical test
- IEC-62899-202-RL - Printed electronics - Part 202: Materials - Conductive ink
- IEC-62899-203 - Printed electronics - Part 203: Materials - Semiconductor ink
- IEC-62899-204 - Printed electronics - Part 204: Materials - Insulator ink - Measurement methods of properties of insulator inks and printed insulating layers
ISO:
- ISO-11628 - Graphic technology -- Prints and printing inks -- Determination of resistance of prints to acids
- ISO-12040 - Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light
- ISO-12632 - Graphic technology - Ink, paper and labels - Requirements on hot alkali penetration and resistance
- ISO-12634 - Graphic technology - Determination of tack of paste inks and vehicles by a rotary tackmeter
- ISO-12644 - Graphic technology - Determination of rheological properties of paste inks and vehicles by the falling rod viscometer
- ISO-19857 - Paper, board and printing inks . Printability . Laboratory test method for offset ink setting
- ISO-22934 - Graphic technology - Communication of offset ink properties
- ISO-23498 - Graphic technology - Visual opacity of printed white ink
- ISO-2834-1 - Graphic technology - Laboratory preparation of test prints - Part 1: Paste inks
- ISO-2834-2 - Graphic technology - Laboratory preparation of test prints - Part 2: Liquid printing inks
- ISO-2834-2-RL - Graphic technology - Laboratory preparation test prints - Part 2: Liquid printing inks (includes Redline Version)
- ISO-2834-3 - Graphic technology - Laboratory preparation of test prints - Part 3: Screen printing inks
- ISO-2836 - Graphic technology - Prints and printing inks - Assessment of resistance of prints to various agents
- ISO-2846-1 - Graphic technology - Colour and transparency of printing ink sets for four-colour printing - Part 1: Sheet-fed and heat-set web offset lithographic printing
- ISO-2846-2 - Graphic technology - Colour and transparency of printing ink sets for four-colour printing - Part 2: Coldset offset lithographic printing
- ISO-2846-3 - Graphic technology -- Colour and transparency of printing ink sets for four-colour-printing -- Part 3: Publication gravure printing (available in English only)
- ISO-2846-4 - Graphic technology -- Colour and transparency of printing ink sets for four-colour-printing -- Part 4: Screen printing
- ISO-2846-5 - Graphic technology - Colour and transparency of printing ink sets for four-colour printing - Part 5: Flexographic printing
Other SDOs:
- DIN-ISO-2836 - Graphic Technology, Prints & Printing Inks, Assessment of Resistance To Various Agents
- SS-ISO-22934 - Graphic technology - Communication of offset ink properties (ISO 22934:2021, IDT)
- SS-ISO-2834-2 - Graphic technology Laboratory preparation of test prints Part 2: Liquid printing inks (ISO 2834-2:2022, IDT)
- SS-ISO-2834-3 - Graphic technology - Laboratory preparation of test prints - Part 3: Screen printing inks (ISO 2834-3:2008, IDT)
- SS-ISO-2836 - Graphic technology - Prints and printing inks - Assessment of resistance of prints to various agents (ISO 2836:2004, IDT)
- SS-ISO-2846-1 - Graphic technology - Colour and transparency of printing ink sets for four-colour printing - Part 1: Sheet-fed and heat-set web offset lithographic printing (ISO 2846-1:2017, IDT)
- SS-ISO-2846-2 - Graphic technology - Colour and transparency of printing ink sets for four-colour printing - Part 2: Coldset offset lithographic printing (ISO 2846-2:2007, IDT)
- SS-ISO-2846-4 - Graphic technology - Colour and transparency of ink sets for four-colour-printing - Part 4: Screen printing
- SS-ISO-9957-1 - Fluid draughting media - Part 1: Water-based India ink - Requirements and test conditions
- SS-ISO-9957-2 - Fluid draughting media - Part 2: Water-based non-India ink - Requirements and test conditions (ISO 9957-2:2019, IDT)