Document Center List of Standards on Buildings In General Including Building Environment Design Building Materials, See 91.100
ICS Code 91.040.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1519 - Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
- ASTM-D7338 - Standard Guide for Assessment Of Fungal Growth in Buildings
- ASTM-E1334 - Standard Practice for Rating the Serviceability of a Building or Building-Related Facility (Withdrawn 2013)
- ASTM-E1678 - Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
- ASTM-E1699 - Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes
- ASTM-E2114 - Standard Terminology for Sustainability
- ASTM-E2156 - Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings (Withdrawn 2022)
- ASTM-E2432 - Standard Guide for General Principles of Sustainability Relative to the Built Environment
- ASTM-E2506 - Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
- ASTM-E2728 - Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings
- ASTM-E2813 - Standard Practice for Building Enclosure Commissioning
- ASTM-E2843 - Standard Specification for Demonstrating That a Building is in Walkable Proximity to Neighborhood Assets
- ASTM-E2844 - Standard Specification for Demonstrating That a Building’s Location Provides Access to Public Transit
- ASTM-E2921 - Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems
- ASTM-E2947 - Standard Guide for Building Enclosure Commissioning
- ASTM-E3021 - Standard Guide for Evaluating the Relative Effectiveness of Building Systems to Resist the Passage of Products of Combustion Based on the Aggregation of Leakage Rates
- ASTM-E3026 - Standard Guide for Readily Observable Moisture Affected Materials and Conditions Conducive to Elevated Moisture in Commercial Buildings: Visual Moisture Assessment Process
- ASTM-E3035 - Standard Classification for Facility Asset Component Tracking System (FACTS)
- ASTM-F1029 - Standard Guide for Selection of Physical Security Measures for a Facility (Withdrawn 2004)
BSI:
- BIP-2032 - Fire Safety. Questions and answers. A practical approach
- BIP-2040 - Winning With the Disability Discrimination Act. a Guide for Business
- BIP-2173 - The BS 9999 handbook. Effective fire safety in the design, management and use of buildings
- BIP-3041 - Recommended DDA hardware for BIP 3040
- BIP-3044 - BS-8300 Design of Buildings and Their Approaches To Meet the Needs of Disabled People, C
- BS-40101 - Building performance evaluation of occupied and operational buildings (using data gathered from tests, measurements, observation and user experience). Specification
- BS-4949 - Glossary of terms relating to building performance
- BS-5588-4 - Fire Precautions in the Design, Construction & Use of Buildings, Code of Practice For
- BS-5588-5 - Fire Precautions in the Design, Construction & Use of Buildings, Access & Facilities F
- BS-6100-1.1 - Glossary of building and civil engineering terms. General and miscellaneous. Types of building
- BS-6100-1.5.3 - Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Setting out and measurement
- BS-6100-1.7.1 - Glossary of building and civil engineering terms. General and miscellaneous. Characteristics and performance. Performance
- BS-6100-1.7.2 - Glossary of building and civil engineering terms. General and miscellaneous. Characteristics and performance. Characteristics
- BS-6100-2 - Building and civil engineering. Vocabulary
- BS-6270-1 - Code of practice for cleaning and surface repair of buildings. Natural stone, cast stone and clay and calcium silicate brick masonry
- BS-6270-2 - Code of practice for cleaning and surface repair of buildings. Concrete and precast concrete masonry
- BS-6270-3 - Code of practice for cleaning and surface repair of buildings
- BS-6472 - Guide To Evaluation of Human Exposure To Vibration in Buildings (1 Hz To 80 Hz)
- BS-7543 - Guide to durability of buildings and building elements, products and components
- BS-7641 - Performance standards in building. Definition and calculation of area and space indicators
- BS-7832 - Performance standards in building. Checklist for briefing. Contents of brief for building design
- BS-7974 - Application of fire safety engineering principles to the design of buildings. Code of practice
- BS-7974 AND PD-7974 SERIES KIT - Fire Safety Engineering. Application of fire safety engineering principles to the design of buildings
- BS-8200 - Design of Non-Loadbearing External Vertical Enclosures of Buildings, British Standard Code
- BS-8207 - Code of practice for energy efficiency in buildings
- BS-8210 - Facilities maintenance management. Code of practice
- BS-8221-1 - Code of practice for cleaning and surface repair of buildings
- BS-8221-2 - Code of practice for cleaning and surface repair of buildings
- BS-8300 - Design of buildings and their approaches to meet the needs of disabled people. Code of practice
- BS-8300-1 - Design of an accessible and inclusive built environment
- BS-8300-2 - Design of an accessible and inclusive built environment
- BS-8536 - Design, manufacture and construction for operability. Code of practice
- BS-8536-1 - Briefing for design and construction
- BS-8536-2 - Briefing for design and construction
- BS-8544 - Guide for life cycle costing of maintenance during the in use phases of buildings
- BS-8579 - Guide to the design of balconies and terraces
- BS-8587 - Guide to facility information management
- BS-8629 - Design, installation, commissioning and maintenance of evacuation alert systems for use by fire and rescue services in buildings containing flats . Code of practice
- BS-8895-1 - Designing for material efficiency in building projects
- BS-8895-2 - Designing for material efficiency in building projects
- BS-8895-3 - Designing for material efficiency in building projects
- BS-9266 - Design of accessible and adaptable general needs housing. Code of practice
- BS-9997 - Fire risk management systems. Requirements with guidance for use
- BS-9999 - Fire safety in the design, management and use of buildings. Code of practice
- BS-EN-15217 - Energy performance of buildings. Methods for expressing energy performance and for energy certification of buildings
- BS-EN-15221-1 - Facility management
- BS-EN-15221-2 - Facility management. Guidance on how to prepare facility management agreements
- BS-EN-15331 - Criteria for design, management and control of maintenance services for buildings
- BS-EN-15643 - Sustainability of construction works. Framework for assessment of buildings and civil engineering works
- BS-EN-15643-2 - Sustainability of construction works. Assessment of buildings
- BS-EN-15643-3 - Sustainability of construction works. Assessment of buildings
- BS-EN-15643-4 - Sustainability of construction works. Assessment of buildings
- BS-EN-15643-5 - Sustainability of construction works. Sustainability assessment of buildings and civil engineering works
- BS-EN-15942-TC - Tracked Changes. Sustainability of construction works. Environmental product declarations. Communication format business-to-business
- BS-EN-16309 - Sustainability of construction works. Assessment of social performance of buildings. Calculation methodology
- BS-EN-16627 - Sustainability of construction works. Assessment of economic performance of buildings. Calculation methods
- BS-EN-17210 - Accessibility and usability of the built environment. Functional requirements
- BS-EN-17472 - Sustainability of construction works. Sustainability assessment of civil engineering works. Calculation methods
- BS-EN-17672 - Sustainability of construction works. Environmental product declarations. Horizontal rules for business-to-consumer communication
- BS-EN-1993-1-4 - Eurocode 3. Design of steel structures
- BS-EN-1993-1-4(NA) - UK National Annex to Eurocode 3: Design of steel structures, General rules, supplementary rules for stainless steels
- BS-EN-ISO-11855-1-TC - Tracked Changes. Building environment design. Embedded radiant heating and cooling systems
- BS-EN-ISO-11855-2 - Building environment design. Embedded radiant heating and cooling systems
- BS-EN-ISO-11855-4-TC - Tracked Changes. Building environment design. Embedded radiant heating and cooling systems
- BS-EN-ISO-11855-5-TC - Tracked Changes. Building environment design. Embedded radiant heating and cooling systems
- BS-EN-ISO-11855-8 - Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems
- BS-EN-ISO-16484-1 - Building automation and control systems (BACS)
- BS-EN-ISO-16484-1-TC - Tracked Changes. Building automation and control systems (BACS)
- BS-EN-ISO-16484-5 - Building automation and control systems (BACS)
- BS-EN-ISO-16484-5-TC - Tracked Changes. Building automation and control systems (BACS)
- BS-EN-ISO-16484-6 - Building automation and control systems (BACS)
- BS-EN-ISO-22057 - Sustainability in buildings and civil engineering works. Data templates for the use of environmental product declarations (EPDs) for construction products in building information modelling (BIM)
- BS-EN-ISO-22510 - Open data communication in building automation, controls and building management. Home and building electronic systems. KNXnet/IP communication
- BS-ISO-11855-6 - Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems
- BS-ISO-11855-7 - Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems
- BS-ISO-11863 - Buildings and building-related facilities. Functional and user requirements and performance. Tools for assessment and comparison
- BS-ISO-13153 - Framework of the design process for energy-saving single-family residential and small commercial buildings
- BS-ISO-13612-1 - Heating and cooling systems in buildings. Method for calculation of the system performance and system design for heat pump systems
- BS-ISO-13612-2 - Heating and cooling systems in buildings. Method for calculation of the system performance and system design for heat pump systems
- BS-ISO-13675 - Heating systems in buildings. Method and design for calculation of the system energy performance. Combustion systems (boilers)
- BS-ISO-15392 - Sustainability in buildings and civil engineering works. General principles
- BS-ISO-15686-1 - Buildings and constructed assets. Service life planning
- BS-ISO-15686-2 - Buildings and constructed assets. Service life planning
- BS-ISO-15686-3 - Buildings and constructed assets. Service life planning
- BS-ISO-15686-4 - Building Construction. Service Life Planning
- BS-ISO-15686-5 - Buildings and constructed assets. Service life planning
- BS-ISO-15686-7 - Buildings and constructed assets. Service life planning
- BS-ISO-15686-7-TC - Tracked Changes. Buildings and constructed assets. Service life planning
- BS-ISO-15686-8 - Buildings and constructed assets. Service-life planning
- BS-ISO-15928-1 - Houses. Description of performance
- BS-ISO-15928-2 - Houses. Description of performance
- BS-ISO-15928-7 - Houses. Description of performance
- BS-ISO-16745 - Environmental performance of buildings. Carbon metric of a building. Use stage
- BS-ISO-16745-1 - Sustainability in buildings and civil engineering works. Carbon metric of an existing building during use stage
- BS-ISO-16745-2 - Sustainability in buildings and civil engineering works. Carbon metric of an existing building during use stage
- BS-ISO-16814 - Building environment design. Indoor air quality. Methods of expressing the quality of indoor air for human occupancy
- BS-ISO-16817 - Building environment design.Indoor environment. Design process for the visual environment
- BS-ISO-16817-TC - Tracked Changes. Building environment design.Indoor environment. Design process for the visual environment
- BS-ISO-16818 - Building environment design. Energy efficiency. Terminology
- BS-ISO-17800 - Facility smart grid information model
- BS-ISO-18566-1 - Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems
- BS-ISO-18566-2 - Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems
- BS-ISO-18566-3 - Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems
- BS-ISO-18566-4 - Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems
- BS-ISO-18566-6 - Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems
- BS-ISO-19454 - Building environment design. Indoor environment. Daylight opening design for sustainability principles in visual environment
- BS-ISO-19455-1 - Planning for functional performance testing for building commissioning
- BS-ISO-20887 - Sustainability in buildings and civil engineering works. Design for disassembly and adaptability. Principles, requirements and guidance
- BS-ISO-21678 - Sustainability in buildings and civil engineering works. Indicators and benchmarks. Principles, requirements and guidelines
- BS-ISO-21928-2 - Sustainability in buildings and civil engineering works. Sustainability indicators
- BS-ISO-21930 - Sustainability in building construction. Environmental declaration of building products
- BS-ISO-21931-1 - Sustainability in buildings and civil engineering works. Framework for methods of assessment of the environmental, social and economic performance of construction works as a basis for sustainability assessment
- BS-ISO-21931-1-TC - Tracked Changes. Sustainability in buildings and civil engineering works. Framework for methods of assessment of the environmental, social and economic performance of construction works as a basis for sustainability assessment
- BS-ISO-21931-2 - Sustainability in buildings and civil engineering works. Framework for methods of assessment of the environmental, social and economic performance of construction works as a basis for sustainability assessment
- BS-ISO-22185-1 - Diagnosing moisture damage in buildings and implementing countermeasures
- BS-ISO-22185-2 - Diagnosing moisture damage in buildings and implementing countermeasures
- BS-ISO-23234 - Buildings and civil engineering works. Security. Planning of security measures in the built environment
- BS-ISO-24365 - Radiators and convectors. Methods and rating for determining the heat output
- BS-ISO-52031 - Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Space emission systems (heating and cooling)
- BS-ISO-9836 - Performance standards in building. Definition and calculation of area and space indicators
- DD-266 - Design of accessible housing. Lifetime home. Code of practice
- DD-9999 - Code of Practice for Fire Safety in the Design, Construction & Use of Buildings
- DD-ISO-15686-9 - Buildings and constructed assets. Service-life planning
- EP-230 - BSI Electronic Book, Disability Access (BS-8300:2001) CD-Rom, (BS-8300:2001 as Amended
- ISO-11855-7-AM1 - - Amendment 1: Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 7: Input parameters for the energy calculation - Amendment 1
- KIT-200 - Standardized Method of Life Cycle Costing for Construction (BS-ISO-15686-5)
- PAS-198 - Specification for managing environmental conditions for cultural collections
- PAS-6463 - Design for the mind. Neurodiversity and the built environment. Guide
- PAS-7 - Fire risk management system. Specification
- PAS-79 - Fire Risk Assessment. Guidance and a recommended methodology
- PAS-88 - Guidance on accessibility of large hotel premises and hotel chains
- PD-156865 - Standardized method of life cycle costing for construction procurement. A supplement to BS ISO 15686-5. Buildings and constructed assets. Service life planning. Life cycle costing
- PD-6523 - Information on access to and movement within and around buildings and on certain facilities for disabled people
- PD-7974-0 - Application of fire safety engineering principles to the design of buildings
- PD-7974-2 - Application of fire safety engineering principles to the design of buildings
- PD-7974-3 - Application of fire safety engineering principles to the design of buildings
- PD-7974-7 - Application of fire safety engineering principles to the design of buildings
- PD-7974-7-TC - Tracked Changes. Application of fire safety engineering principles to the design of buildings
- PD-7974-8 - Application of fire safety engineering principles to the design of buildings
- PD-CEN-17621 - Accessibility and usability of the built environment. Technical performance criteria and specifications
- PD-CEN-17622 - Accessibility and usability of the built environment. Conformity assessment
- PD-ISO-12720 - Sustainability in buildings and civil engineering works. Guidelines on the application of the general principles in ISO 15392
- PD-ISO-15686-11 - Buildings and constructed assets. Service life planning
- PD-ISO-16822 - Building environment design. List of test procedures for heating, ventilating, air-conditioning and domestic hot water equipment related to energy efficiency
- PD-ISO-21929-2 - Sustainability in building construction. Sustainability indicators
- PD-ISO-21932 - Sustainability in buildings and civil engineering works. A review of terminology
- PD-ISO-23764 - Methodology for achieving non-residential zero-energy buildings (ZEBs)
ISO:
- ISO-11855-1 - Building environment design - Embedded radiant heating and cooling systems - Part 1: Definitions, symbols, and comfort criteria
- ISO-11855-1-AM1 - - Amendment 1: Building environment design - Embedded radiant heating and cooling systems - Part 1: Definitions, symbols, and comfort criteria - Amendment 1
- ISO-11855-2 - Building environment design - Embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity
- ISO-11855-2-AM1 - - Amendment 1: Building environment design - Embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity - Amendment 1
- ISO-11855-3 - Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning
- ISO-11855-3-AM1 - - Amendment 1: Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning - Amendment 1
- ISO-11855-4 - Building environment design - Embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS)
- ISO-11855-4-AM1 - - Amendment 1: Building environment design - Embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) - Amendment 1
- ISO-11855-5 - Building environment design - Embedded radiant heating and cooling systems - Part 5: Installation
- ISO-11855-5-AM1 - - Amendment 1: Building environment design - Embedded radiant heating and cooling systems - Part 5: Installation - Amendment 1
- ISO-11855-6 - Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 6: Control
- ISO-11855-6-AM1 - - Amendment 1: Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 6: Control - Amendment 1
- ISO-11855-7 - Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 7: Input parameters for the energy calculation
- ISO-11855-8 - Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 8: Electrical heating systems
- ISO-11863 - Buildings and building-related facilities - Functional and user requirements and performance - Tools for assessment and comparison
- ISO-12720 - Sustainability in buildings and civil engineering works - Guidelines on the application of the general principles in ISO 15392
- ISO-13153 - Framework of the design process for energy-saving single-family residential and small commercial buildings
- ISO-13612-1 - Heating and cooling systems in buildings - Method for calculation of the system performance and system design for heat pump systems - Part 1: Design and dimensioning
- ISO-13612-2 - Heating and cooling systems in buildings - Method for calculation of the system performance and system design for heat pump systems - Part 2: Energy calculation
- ISO-13675 - Heating systems in buildings - Method and design for calculation of the system energy performance - Combustion systems (boilers)
- ISO-15392 - Sustainability in buildings and civil engineering works - General principles
- ISO-15686-1 - Buildings and constructed assets - Service life planning - Part 1: General principles and framework
- ISO-15686-10 - Buildings and constructed assets - Service life planning - Part 10: When to assess functional performance
- ISO-15686-11 - Buildings and constructed assets - Service life planning - Part 11: Terminology
- ISO-15686-2 - Buildings and constructed assets - Service life planning - Part 2: Service life prediction procedures
- ISO-15686-3 - Buildings and constructed assets - Service life planning - Part 3: Performance audits and reviews
- ISO-15686-4 - Building Construction - Service Life Planning - Part 4: Service Life Planning using Building Information Modelling
- ISO-15686-5 - Buildings and constructed assets - Service life planning - Part 5: Life-cycle costing
- ISO-15686-6 - Buildings and constructed assets - Service life planning - Part 6: Procedures for considering environmental impacts
- ISO-15686-7 - Buildings and constructed assets - Service life planning - Part 7: Performance evaluation for feedback of service life data from practice
- ISO-15686-8 - Buildings and constructed assets - Service-life planning - Part 8: Reference service life and service-life estimation
- ISO-15686-9 - Buildings and constructed assets - Service-life planning - Part 9: Guidance on assessment of service-life data
- ISO-15928-1 - Houses - Description of performance - Part 1: Structural safety
- ISO-15928-2 - Houses - Description of performance - Part 2: Structural serviceability
- ISO-15928-3 - Houses - Description of performance - Part 3: Structural durability
- ISO-15928-4 - Houses - Description of performance - Part 4: Fire safety
- ISO-15928-5 - Houses - Description of performance - Part 5: Operating energy
- ISO-15928-7 - Houses - Description of performance - Part 7: Accessibility and usability
- ISO-16484-1 - Building automation and control systems (BACS) - Part 1: Project specification and implementation
- ISO-16484-2 - Building automation and control systems (BACS) - Part 2: Hardware
- ISO-16484-3 - Building automation and control systems (BACS) - Part 3: Functions
- ISO-16484-5 - Building automation and control systems (BACS) - Part 5: Data communication protocol
- ISO-16484-5-1 - Building automation and control systems - Part 5: Data communication protocolAmendment 1
- ISO-16484-5-AM1 - - Amendment 1
- ISO-16484-6 - Building automation and control systems (BACS) - Part 6: Data communication conformance testing
- ISO-16745 - Environmental performance of buildings - Carbon metric of a building - Use stage
- ISO-16745-1 - Sustainability in buildings and civil engineering works - Carbon metric of an existing building during use stage - Part 1: Calculation, reporting and communication
- ISO-16745-2 - Sustainability in buildings and civil engineering works - Carbon metric of an existing building during use stage - Part 2: Verification
- ISO-16813 - Building environment design - Indoor environment - General principles
- ISO-16814 - Building environment design - Indoor air quality - Methods of expressing the quality of indoor air for human occupancy
- ISO-16817 - Building environment design - Indoor environment - Design process for the visual environment
- ISO-16818 - Building environment design - Energy efficiency - Terminology
- ISO-16822 - Building environment design - List of test procedures for heating, ventilating, air-conditioning and domestic hot water equipment related to energy efficiency
- ISO-17800 - Facility smart grid information model
- ISO-18566-1 - Building environment design - Design, test methods and control of hydronic radiant heating and cooling panel systems - Part 1: Vocabulary, symbols, technical specifications and requirements
- ISO-18566-2 - Building environment design - Design, test methods and control of hydronic radiant heating and cooling panel systems - Part 2: Determination of heating and cooling capacity of ceiling mounted radiant panels
- ISO-18566-3 - Building environment design - Design, test methods and control of hydronic radiant heating and cooling panel systems - Part 3: Design of ceiling mounted radiant panels
- ISO-18566-4 - Building environment design - Design, test methods and control of hydronic radiant heating and cooling panel systems - Part 4: Control of ceiling mounted radiant heating and cooling panels
- ISO-18566-6 - Building environment design - Design, test methods and control of hydronic radiant heating and cooling panel systems - Part 6: Input parameters for the energy calculation
- ISO-19208 - Framework for specifying performance in buildings
- ISO-19454 - Building environment design - Indoor environment - Daylight opening design for sustainability principles in visual environment
- ISO-19455-1 - Planning for functional performance testing for building commissioning - Part 1: Secondary hydronic pump, system and associated controls
- ISO-20887 - Sustainability in buildings and civil engineering works - Design for disassembly and adaptability - Principles, requirements and guidance
- ISO-21678 - Sustainability in buildings and civil engineering works - Indicators and benchmarks - Principles, requirements and guidelines
- ISO-21928-2 - Sustainability in buildings and civil engineering works - Sustainability indicators - Part 2: Framework for the development of indicators for civil engineering works
- ISO-21929-1 - Sustainability in building construction - Sustainability indicators - Part 1: Framework for the development of indicators and a core set of indicators for buildings
- ISO-21929-2 - Sustainability in building construction - Sustainability indicators - Part 2: Framework for the development of indicators for civil engineering works
- ISO-21930 - Sustainability in buildings and civil engineering works - Core rules for environmental product declarations of construction products and services
- ISO-21931-1 - Sustainability in buildings and civil engineering works - Framework for methods of assessment of the environmental, social and economic performance of construction works as a basis for sustainability assessment - Part 1: Buildings
- ISO-21931-2 - Sustainability in buildings and civil engineering works - Framework for methods of assessment of the environmental, social and economic performance of construction works as a basis for sustainability assessment - Part 2: Civil engineering works
- ISO-21932 - Sustainability in buildings and civil engineering works - A review of terminology
- ISO-22057 - Sustainability in buildings and civil engineering works - Data templates for the use of environmental product declarations (EPDs) for construction products in building information modelling (BIM)
- ISO-22185-1 - Diagnosing moisture damage in buildings and implementing countermeasures - Part 1: Principles, nomenclature and moisture transport mechanisms
- ISO-22185-2 - Diagnosing moisture damage in buildings and implementing countermeasures - Part 2: Assessment of conditions
- ISO-22510 - Open data communication in building automation, controls and building management - Home and building electronic systems - KNXnet/IP communication
- ISO-23045 - Building environment design - Guidelines to assess energy efficiency of new buildings
- ISO-23234 - Buildings and civil engineering works - Security - Planning of security measures in the built environment
- ISO-23764 - Methodology for achieving non-residential zero-energy buildings (ZEBs)
- ISO-24365 - Radiators and convectors - Methods and rating for determining the heat output
- ISO-5202 - Buildings and civil engineering works - Building resilience strategies related to public health emergencies - Compilation of relevant information
- ISO-52031 - Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Space emission systems (heating and cooling)
- ISO-6240 - Performance standards in building -- Contents and presentation
- ISO-6241 - Performance standards in building -- Principles for their preparation and factors to be considered
- ISO-6242-1 - Building construction -- Expression of users requirements -- Part 1: Thermal requirements'
- ISO-6242-2 - Building construction -- Expression of users requirements -- Part 2: Air purity requirements'
- ISO-6242-3 - Building construction -- Expression of users requirements -- Part 3: Acoustical requirements'
- ISO-7162 - Performance standards in building -- Contents and format of standards for evaluation of performance
- ISO-9699 - Performance standards in building -- Checklist for briefing -- Contents of brief for building design
- ISO-9836 - Performance standards in building - Definition and calculation of area and space indicators
- ISO/DIS-21930 - Sustainability in Building Construction - Environmental Declaration of Building Produc
- ISO/PAS-22539 - User guidance to ISO 15928 - Houses - Description of performance
Other SDOs:
- DIN-EN-1991-4 - Eurocode 1: Actions on structures - Part 4: Silos and tanks; German version EN 1991-4:2006
- EN-15217 - Energy Performance of Buildings - Methods for Expressing Energy Performance & for Ener
- EN-15221-1 - Part 1: Terms & Definitions, Facility Management
- EN-15221-2 - Part 2: Guidance on How To Prepare Facility Management Agreements, Facility Management
- EN-15331 - Criteria for design, management and control of maintenance services for buildings
- EN-15643-1 - Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework
- EN-15643-2 - Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance
- EN-15643-3 - Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance
- EN-15643-4 - Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance
- EN-15643-5 - Sustainability of construction works - Sustainability assessment of buildings and civil engineering works - Part 5: Framework on specific principles and requirement for civil engineering works
- EN-16309 - Sustainability of construction works - Assessment of social performance of buildings - Calculation methodology
- EN-16627 - Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods
- EN-1993-1-4 - Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
- EN-1993-1-4(NA) - Uk National Annex To Eurocode 3, Design of Steel Structures, General Rules, Supplement
- EN-ISO-16484-1 - Part 1: Project Specification & Implementation, Building Automation & Control Systems
- EN-ISO-16484-5 - Building automation and control systems (BACS) - Part 5: Data communication protocol
- EN-ISO-16484-6 - Building automation and control systems (BACS) - Part 6: Data communication conformance testing
- IWA-9 - Framework for managing sustainable development in business districts
- SIS-CEN/TS-17440 - Assessment and retrofitting of existing structures
- SIS-ISO/TR-21932 - Sustainability in buildings and civil engineering works - A review of terminology (ISO/TR 21932:2013, IDT)
- SIS-ISO/TS-15686-9 - Buildings and constructed assets - Service-life planning - Part 9: Guidance on assessment of service-life data (ISO/TS 15686-9:2008, IDT)
- SIS-ISO/TS-21929-1 - Sustainability in building construction - Sustainability indicators - Part 1: Framework for the development of indicators for buildings
- SS-EN-1090-2 - Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
- SS-EN-15217 - Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings
- SS-EN-15221-1 - Facility Management - Part 1: Terms and definitions
- SS-EN-15221-2 - Facility Management - Part 2: Guidance on how to prepare Facility Management agreements
- SS-EN-15331 - Criteria for design, management and control of maintenance services for buildings
- SS-EN-15459 - Energy performance of buildings - Economic evaluation procedure for energy systems in buildings
- SS-EN-15459-1 - Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1: Calculation procedures, Module M1-14
- SS-EN-15603 - Energy performance of buildings - Overall energy use and definition of energy ratings
- SS-EN-15643 - Sustainability of construction works - Framework for assessment of buildings and civil engineering works
- SS-EN-15643-1 - Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework
- SS-EN-15643-2 - Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance
- SS-EN-15643-3 - Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance
- SS-EN-15643-4 - Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance
- SS-EN-15643-5 - Sustainability of construction works - Sustainability assessment of buildings and civil engineering works - Part 5: Framework on specific principles and requirement for civil engineering works
- SS-EN-15942 - Sustainability of construction works - Environmental product declarations - Communication format business-to-business
- SS-EN-16309 - Sustainability of construction works - Assessment of social performance of buildings - Calculation methodology
- SS-EN-16627 - Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods
- SS-EN-17037 - Daylight in buildings
- SS-EN-17064 - Safety requirements for cableway installations designed to carry persons - Prevention and fight against fire
- SS-EN-17210 - Accessibility and usability of the built environment - Functional requirements
- SS-EN-17472 - Sustainability of construction works - Sustainability assessment of civil engineering works - Calculation methods
- SS-EN-17672 - Sustainability of construction works - Environmental product declarations - Horizontal rules for business-to-consumer communication
- SS-EN-1829-2 - High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors
- SS-EN-1993-1-3 - Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
- SS-EN-1993-1-4 - Eurocode 3: Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
- SS-EN-1993-1-4-AM2 - Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
- SS-EN-ISO-11855-1 - Building environment design - Embedded radiant heating and cooling systems - Part 1: Definitions, symbols, and comfort criteria (ISO 11855-1:2021)
- SS-EN-ISO-11855-1-AM1 - Building environment design - Embedded radiant heating and cooling systems - Part 1: Definitions, symbols, and comfort criteria - Amendment 1 (ISO 11855-1:2021/Amd 1:2023)
- SS-EN-ISO-11855-2 - Building environment design - Embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2021)
- SS-EN-ISO-11855-2-AM1 - Building environment design - Embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity - Amendment 1 (ISO 11855-2:2021/DAM 1:2023)
- SS-EN-ISO-11855-3 - Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2021)
- SS-EN-ISO-11855-3-AM1 - Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning - Amendment 1 (ISO 11855-3:2021/Amd 1:2023)
- SS-EN-ISO-11855-4 - Building environment design - Embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 11855-4:2021)
- SS-EN-ISO-11855-4-AM1 - Building environment design - Embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) - Amendment 1 (ISO 11855-4:2021/Amd 1:2023)
- SS-EN-ISO-11855-5 - Building environment design - Embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2021)
- SS-EN-ISO-16484-1 - Building automation and control systems (BACS) - Part 1: Project specification and implementation (ISO 16484-1:2010)
- SS-EN-ISO-16484-2 - Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004)
- SS-EN-ISO-16484-3 - Building automation and control systems (BACS) - Part 3: Functions (ISO 16484-3:2005)
- SS-EN-ISO-16484-5 - Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO 16484-5:2022)
- SS-EN-ISO-16484-5-AM1 - Building automation and control systems (BACS) - Part 5: Data communication protocol - Amendment 1 (ISO 16484-5:2017/Amd 1:2020)
- SS-EN-ISO-16484-6 - Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO 16484-6:2014)
- SS-EN-ISO-22510 - Open data communication in building automation, controls and building management - Home and building electronic systems - KNXnet/IP communication (ISO 22510:2019)
- SS-EN-ISO-41011 - Facility management - Vocabulary (ISO 41011:2017)
- SS-EN-ISO-41012 - Facility management - Guidance on strategic sourcing and the development of agreements (ISO 41012:2017)
- SS-EN-ISO-52000-1 - Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017)
- SS-EN-ISO-9346 - Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary (ISO 9346:2007)
- SS-ENV-1992-1-2 - Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
- SS-ISO-11855-1 - Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definition, symbols, and comfort criteria (ISO 11855-1:2012, IDT)
- SS-ISO-11855-4 - Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 11855-4:2012, IDT)
- SS-ISO-15392 - Sustainability in buildings and civil engineering works - General principles (ISO 15392:2019, IDT)
- SS-ISO-15686-1 - Buildings and constructed assets - Service life planning - Part 1: General principles and framework
- SS-ISO-15686-2 - Buildings and constructed assets - Service life planning - Part 2: Service life prediction procedures (ISO 15686-2:2012, IDT)
- SS-ISO-15686-3 - Buildings and constructed assets - Service life planning - Part 3: Performance audits and reviews
- SS-ISO-15686-5 - Buildings and constructed assets - Service life planning - Part 5: Life-cycle costing (ISO 15686-5:2017, IDT)
- SS-ISO-15686-7 - Buildings and constructed assets - Service life planning - Part 7: Performance evaluation for feedback of service life data from practice (ISO 15686-7:2017, IDT)
- SS-ISO-15686-8 - Buildings and constructed assets - Service-life planning - Part 8: Reference service life and service-life estimation (ISO 15686-8:2008, IDT)
- SS-ISO-20887 - Sustainability in buildings and civil engineering works - Design for disassembly and adaptability - Principles, requirements and guidance (ISO 20887:2020, IDT)
- SS-ISO-21678 - Sustainability in buildings and civil engineering works - Indicators and benchmarks - Principles, requirements and guidelines (ISO 21678:2020, IDT)
- SS-ISO-21930 - Sustainability in buildings and civil engineering works - Core rules for environmental product declarations of construction products and services (ISO 21930:2017, IDT)
- SS-ISO-21931-1 - Sustainability in building construction - Framework for methods of assessment of the environmental performance of construction works - Part 1: Buildings (ISO 21931-1:2010, IDT)
- UNE-EN-16627 - Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods