Document Center List of Standards on Ceilings. Floors. Stairs Including Screeds, Ramps, Etc.
ICS Code 91.060.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1731 - Standard Specification for Concrete Floor Tile
- ASTM-C1732 - Standard Practice for Installation of Concrete Floor Tiles
- ASTM-C1858 - Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions
- ASTM-C627 - Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
- ASTM-D5319 - Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
- ASTM-E1111 - Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
- ASTM-E1155 - Standard Test Method for Determining
F Floor Flatness andF F Floor Levelness NumbersL - ASTM-E1155M - Standard Test Method for Determining
F Floor Flatness andF F Floor Levelness Numbers (Metric) (Withdrawn 2023)L - ASTM-E1264 - Standard Classification for Acoustical Ceiling Products
- ASTM-E1481 - Standard Terminology of Railing Systems and Rails for Buildings
- ASTM-E1486 - Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
- ASTM-E1486M - Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)
- ASTM-E196 - Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
- ASTM-E2322 - Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
- ASTM-E580 - Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
- ASTM-E894 - Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
- ASTM-E935 - Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
- ASTM-E985 - Standard Specification for Permanent Metal Railing Systems and Rails for Buildings (Withdrawn 2015)
- ASTM-E989 - Standard Classification for Determination of Single-Number Metrics for Impact Noise
- ASTM-F1515 - Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
- ASTM-F1694 - Standard Guide for Composing Walkway Surface Investigation, Evaluation and Incident Report Forms for Slips, Stumbles, Trips, and Falls
- ASTM-F1700 - Standard Specification for Solid Vinyl Floor Tile
- ASTM-F1869 - Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
- ASTM-F2034 - Standard Specification for Sheet Linoleum Floor Covering
- ASTM-F2169 - Standard Specification for Resilient Stair Treads
- ASTM-F2195 - Standard Specification for Linoleum Floor Tile
- ASTM-F2199 - Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
- ASTM-F2659 - Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
- ASTM-F2965 - Standard Guide for Selection of Walkway Surfaces and Treatments When Considering Aggressive Contaminant Conditions in Commercial and Industrial (Not Including Construction) Environments (Withdrawn 2022)
- ASTM-F710 - Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
BSI:
- BS-3187 - Specification for Electrically Conducting Rubber Flooring
- BS-4592 - Specification for industrial open type metal flooring and stair treads
- BS-4592-0 - Flooring, stair treads and handrails for industrial use
- BS-4592-1 - Industrial type flooring and stair treads
- BS-4592-2 - Industrial type flooring and stair treads
- BS-4592-3 - Industrial type flooring and stair treads
- BS-4592-4 - Industrial type flooring and stair treads
- BS-4592-5 - Industrial type flooring and stair treads
- BS-4592-6 - Industrial type flooring and stair treads
- BS-5385-1 - Wall and floor tiling
- BS-5385-1-TC - Tracked Changes. Wall and floor tiling
- BS-5385-2 - Wall and floor tiling
- BS-5385-3 - Wall and floor tiling
- BS-5385-4 - Wall and floor tiling
- BS-5385-5 - Wall and floor tiling
- BS-5395-1 - Stairs
- BS-5395-2 - Stairs, ladders and walkways
- BS-5395-3 - Stairs, ladders and walkways. Code of practice for the design of industrial type stairs, permanent ladders and walkways
- BS-5395-4 - Code of practice for the design of stairs for limited access
- BS-585-1 - Wood stairs
- BS-585-2 - Wood stairs
- BS-6263-2 - Care and maintenance of floor surfaces
- BS-8000-9 - Workmanship on building sites
- BS-8103-3 - Structural design of low-rise buildings
- BS-8103-4 - Structural design of low-rise buildings
- BS-8201 - Code of practice for installation of flooring of wood and wood-based panels
- BS-8203 - Code of practice for installation of resilient floor coverings
- BS-8203-TC - Tracked Changes. Code of practice for installation of resilient floor coverings
- BS-8204-1 - Screeds, bases and in situ floorings
- BS-8204-2 - Screeds, bases and in situ floorings
- BS-8204-3 - Screeds, bases and in situ floorings
- BS-8204-4 - Screeds, bases and in situ floorings
- BS-8204-5 - Screeds, bases and in situ floorings
- BS-8204-6 - Screeds, bases and in situ floorings
- BS-8204-7 - Screeds, bases and in-situ floorings
- BS-8290-1 - Suspended Ceilings, Code of Practice for Design
- BS-8290-2 - Suspended Ceilings, Specification for Performance of Components & Assemblies
- BS-8290-3 - Suspended Ceilings, Code of Practice for Installation & Maintenance
- BS-EN-1168 - Precast concrete products. Hollow core slabs
- BS-EN-12825 - Raised access floors
- BS-EN-13213 - Hollow floors
- BS-EN-13318 - Screed material and floor screeds. Definitions
- BS-EN-1365-2 - Fire resistance tests for loadbearing elements
- BS-EN-13813 - Screed material and floor screeds. Screed material. Properties and requirements
- BS-EN-13892-1 - Methods of test for screed materials
- BS-EN-13892-2 - Methods of test for screed materials. Determination of flexural and compressive strength
- BS-EN-13892-4 - Methods of test for screed materials
- BS-EN-13892-6 - Methods of test for screed materials
- BS-EN-13892-8 - Methods of test for screed materials
- BS-EN-13964 - Suspended ceilings. Requirements and test methods
- BS-EN-14076 - Timber stairs. Terminology
- BS-EN-14231 - Natural stone test methods. Determination of the slip resistance by means of the pendulum tester
- BS-EN-14843 - Precast concrete products. Stairs
- BS-EN-15254-7 - Extended application of results from fire resistance tests. Non-loadbearing ceilings
- BS-EN-15644 - Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements
- BS-EN-16165 - Determination of slip resistance of pedestrian surfaces. Methods of evaluation
- BS-EN-16481 - Timber stairs. Structural design. Calculation methods
- BS-EN-16487 - Acoustics. Test code for suspended ceilings. Sound absorption
- BS-EN-16929 - Test methods. Timber floors. Determination of vibration properties
- BS-EN-ISO-16283-2 - Acoustics. Field measurement of sound insulation in buildings and of building elements
- BS-EN-ISO-16283-2-TC - Tracked Changes. Acoustics. Field measurement of sound insulation in buildings and of building elements
- DD-CEN-15680 - Prefabricated timber stairs. Mechanical test methods
- DD-ISO-22269 - Reaction to fire tests. Fire growth. Full-scale test for stairs and stair coverings
ISO:
- ISO-140-6 - Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 6: Laboratory measurements of impact sound insulation of floors
- ISO-140-7 - Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 7: Field measurements of impact sound insulation of floors
- ISO-140-8 - Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
- ISO-140-9 - Acoustics -- Measurements of sound insulation in buildings and of building elements -- Part 9 : Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it
- ISO-16283-2 - Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation
- ISO-22269 - Reaction to fire tests - Fire growth - Full-scale test for stairs and stair coverings
- ISO-3880-1 - Building construction -- Stairs -- Vocabulary -- Part 1
- ISO-3881 - Building construction -- Modular co-ordination -- Stairs and stair openings -- Co-ordinating dimensions
- ISO-6511 - Building construction -- Modular coordination -- Modular floor plane for vertical dimensions
- ISO-9882 - Performance standards in building -- Performance test for precast concrete floors -- Behaviour under non-concentrated load
- ISO-9883 - Performance standards in building -- Performance test for precast concrete floors -- Behaviour under concentrated load
Other SDOs:
- DIN-18560-1 - Floor screeds in building construction - Part 1: General requirements, testing and construction
- DIN-18560-2 - Floor screeds in building construction - Part 2: Floor screeds and heating floor screeds on insulation layers
- DIN-18560-3 - Floor screeds in building construction - Part 3: Bonded screed
- DIN-18560-4 - Floor screeds - Part 4: Screeds laid on separated layer
- DIN-18560-7 - Floor screeds - Part 7: Heavy-duty screeds (industrial screeds)
- DIN-EN-13964 - Suspended ceilings - Requirements and test methods; German version EN 13964:2014
- DIN-EN-14246 - Gypsum Elements for Suspended Ceilings - Definitions, Requirements & Test Methods
- DIN-EN-14716 - Stretched Ceilings, Requirements & Test Methods
- DIN-EN-14975 - Loft Ladders - Requirements, Marking & Testing
- EN-1168 - Precast Concrete Products - Hollow Core Slabs
- EN-1365-2 - Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
- EN-13964 - Suspended ceilings - Requirements and test methods
- EN-14076 - Timber stairs - Terminology
- EN-14716 - Stretched Ceilings, Requirements & Test Methods
- EN-14843 - Precast Concrete Products, Stairs
- EN-15254-7 - Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction
- EN-15644 - Traditionally Designed Prefabricated Stairs Made of Solid Wood, Specifications & Requi
- EN-16481 - Timber stairs - Structural design - Calculation methods
- EN-16487 - Acoustics - Test code for suspended ceilings - Sound absorption
- EN-16929 - Test methods - Timber floors - Determination of vibration properties
- EN-ISO-16283-2 - Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation
- JIS-A-1450 - Test methods for raised access floor
- JIS-A-1454 - Test methods -- Resilient floorcoverings
- JIS-A-5901 - Straw Tatamidoko & Straw Sandwich Tatamidoko
- JIS-A-5902 - TATAMI
- JIS-A-5902-AM1 - TATAMI (Amendment 1)
- JIS-A-5914 - Non Straw Tatamidoko
- JIS-A-6519 - Steel furring components for gymnasium floors
- SIS-942141 - Tubular fluorescent lamps co-ordinated with falseceilings. Basic sizes
- SS-EN-1168 - Precast concrete products - Hollow core slabs
- SS-EN-1195 - Timber structures - Test methods - Performance ofstructural floor decking
- SS-EN-12825 - Raised access floors
- SS-EN-13213 - Hollow floors
- SS-EN-13318 - Screed material and floor screeds - Definitions
- SS-EN-13442 - Wood and parquet flooring and wood panelling and cladding - Determination of the resistance to chemical agents
- SS-EN-13489 - Wood-flooring and parquet - Multi-layer parquet elements
- SS-EN-13629 - Wood flooring - Solid individual and pre-assembled hardwood boards
- SS-EN-1364-2 - Fire resistance for tests for non-loadbearing elements - Part 2: Ceilings
- SS-EN-13647 - Wood flooring and wood panelling and cladding - Determination of geometrical characteristics
- SS-EN-1365-2 - Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
- SS-EN-13964 - Suspended ceilings - Requirements and test methods
- SS-EN-13964-AM1 - Suspended ceilings - Requirements and test methods
- SS-EN-14076 - Timber stairs - Terminology
- SS-EN-14716 - Stretched ceilings - Requirements and test methods
- SS-EN-14975 - Loft ladders - Requirements, marking and testing
- SS-EN-1516 - Surfaces for sports areas - Determination of resistance to indentation
- SS-EN-15254-7 - Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction
- SS-EN-1534 - Wood flooring and parquet - Determination of resistance to indentation - Test method
- SS-EN-15644 - Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements
- SS-EN-16165 - Determination of slip resistance of pedestrian surfaces - Methods of evaluation
- SS-EN-16481 - Timber stairs - Structural design - Calculation methods
- SS-EN-16487 - Acoustics - Test code for suspended ceilings - Sound absorption
- SS-EN-16929 - Test methods - Timber floors - Determination of vibration properties
- SS-EN-17456 - Wood flooring and parquet - Determination of top layer delamination of multilayer elements - Test method
- SS-EN-718 - Resilient floor coverings - Determination of massper unit area of a reinforcement or a backing of polyvinyl chloride floor coverings
- SS-EN-ISO-16283-2 - Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2020)
- UNE-EN-ISO-16283-1 - Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation
- UNE-EN-ISO-16283-2 - Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation