Document Center List of Standards on Terracotta Building Products Including Roofing Tiles, Bricks, Etc.
ICS Code 91.100.25
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1026 - Standard Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling
- ASTM-C1027 - Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
- ASTM-C1028 - Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method (Withdrawn 2014)
- ASTM-C1091 - Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
- ASTM-C1167 - Standard Specification for Clay Roof Tiles
- ASTM-C1190 - Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
- ASTM-C1243 - Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
- ASTM-C1251 - Standard Guide for Determination of Specific Surface Area of Advanced Ceramic Materials by Gas Adsorption (Withdrawn 2000)
- ASTM-C1505 - Standard Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading
- ASTM-C322 - Standard Practice for Sampling Ceramic Whiteware Clays
- ASTM-C323 - Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays (Withdrawn 2024)
- ASTM-C479 - Standard Specification for Vitrified Clay Liner Plates
- ASTM-C483 - Standard Test Method for Electrical Resistance of Conductive Ceramic Tile (Withdrawn 2004)
- ASTM-C484 - Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
- ASTM-C485 - Standard Test Method for Measuring Warpage of Ceramic Tile
- ASTM-C499 - Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
- ASTM-C501 - Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
- ASTM-C502 - Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
- ASTM-C515 - Standard Specification for Chemical-Resistant Ceramic Tower Packings
- ASTM-C609 - Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
- ASTM-C648 - Standard Test Method for Breaking Strength of Ceramic Tile
- ASTM-C650 - Standard Test Method for Resistance of Ceramic Tile to Chemical Substances
- ASTM-C895 - Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
- ASTM-F142 - Standard Test Method for Indentation of Resilient Floor Tiles (Mcburney Test) (Withdrawn 2007)
- ASTM-F2199 - Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
BSI:
- BS-EN-1024 - Clay roofing tiles for discontinuous laying. Determination of geometric characteristics
- BS-EN-1051-1 - Glass in building. Glass blocks and glass pavers
- BS-EN-1304 - Clay roofing tiles and fittings. Product definitions and specifications
- BS-EN-14437 - Determination of the uplift resistance of installed clay or concrete tiles for roofing. Roof system test method
- BS-EN-14891 - Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking
- BS-EN-14891-TC - Tracked Changes. Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking
- BS-EN-1806 - Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods
- BS-EN-539-1 - Clay roofing tiles for discontinuous laying. Determination of physical characteristics
- BS-EN-539-2 - Clay roofing tiles for discontinuous laying. Determination of physicalcharacteristics
- BS-EN-771-1 - Specification for masonry units
- BS-EN-771-2 - Specification for masonry units
- BS-EN-772-1 - Methods of test for masonry units
- BS-EN-772-22 - Methods of test for masonry units
- BS-EN-ISO-10545-16 - Ceramic tiles
- PAS-70 - HD clay bricks. Guide to appearance and site measured dimensions and tolerance
- PD-CEN-16886 - Guidance on the application of statistical methods for determining the properties of masonry products
ISO:
- ISO-10545-1 - Ceramic tiles - Part 1: Sampling and basis for acceptance
- ISO-10545-10 - Ceramic tiles - Part 10: Determination of moisture expansion
- ISO-10545-11 - Ceramic tiles -- Part 11: Determination of crazing resistance for glazed tiles
- ISO-10545-12 - Ceramic tiles -- Part 12: Determination of frost resistance
- ISO-10545-13 - Ceramic tiles - Part 13: Determination of chemical resistance
- ISO-10545-14 - Ceramic tiles - Part 14: Determination of resistance to stains
- ISO-10545-15 - Ceramic tiles - Part 15: Determination of lead and cadmium given off by tiles
- ISO-10545-2 - Ceramic tiles - Part 2: Determination of dimensions and surface quality
- ISO-10545-3 - Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density
- ISO-10545-5 - Ceramic tiles -- Part 5: Determination of impact resistance by measurement of coefficient of restitution
- ISO-10545-7 - Ceramic tiles -- Part 7: Determination of resistance to surface abrasion for glazed tiles
Other SDOs:
- DIN-EN-1304 - Clay roofing tiles and fittings - Product definitions and specifications; German version EN 1304:2013
- DIN-EN-14411 - Ceramic tiles - Definition, classification, characteristics, assessment and verification of constancy of performance and marking; German version EN 14411:2016
- DIN-EN-14437 - Determination of the Uplift Resistance of Installed Clay or Concrete Tiles for Roofin
- DIN-EN-1806 - Chimneys - Clay/Ceramic Flue Blocks for Single Wall Chimneys - Requirements & Test Met
- DIN-EN-539-1 - Part 1: Impermeability Test, Clay Roofing Tiles for Discontinuous Laying - Determinati
- DIN-EN-539-2 - Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2: Test for frost resistance; German version EN 539-2:2013
- DIN-EN-771-1 - Specification for masonry units - Part 1: Clay masonry units
- EN-1024 - Clay roofing tiles for discontinuous laying - Determination of geometric characteristics
- EN-1304 - Clay roofing tiles and fittings - Product definitions and specifications
- EN-14437 - Determination of the Uplift Resistance of Installed Clay or Concrete Tiles for Roofin
- EN-14891 - Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation
- EN-1806 - Chimneys - Clay/Ceramic Flue Blocks for Single Wall Chimneys - Requirements & Test Met
- EN-539-1 - Part 1: Impermeability Test, Clay Roofing Tiles for Discontinuous Laying - Determinati
- EN-539-2 - Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2: Test for frost resistance
- EN-771-1 - Specification for masonry units - Part 1: Clay masonry units
- EN-771-2 - Specification for masonry units - Part 2: Calcium silicate masonry units
- EN-772-1 - Methods of test for masonry units - Part 1: Determination of compressive strength
- EN-772-16 - Methods of test for masonry units - Part 16: Determination of dimensions
- EN-772-18 - Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units
- EN-772-5 - Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units
- JIS-A-1509-13 - Test methods for ceramic tiles - Part 13: Test methods for unit-tiles of quality
- JIS-A-1509-2 - Part 2: Determination of Surface Quality, Dimensions & Crook, Warp & Rectangularity, S
- JIS-A-5208 - Clay rooftiles
- JIS-A-5422-AM1 - Fiber reinforced cement sidings (Amendment 1)
- SS-105100 - Ceramic tiles - Determination of inverse colour fastness
- SS-EN-1024 - Clay roofing tiles for discontinuous laying - Determination of geometric characteristics
- SS-EN-1051-1 - Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description
- SS-EN-1304 - Clay roofing tiles and fittings - Product definitions and specifications
- SS-EN-1304-AM1 - Clay roofing tiles for discontinuous laying - Products definitions and specifications
- SS-EN-14411 - Ceramic tiles - Definition, classification, characteristics, assessment and verification of constancy of performance and marking
- SS-EN-14437 - Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method
- SS-EN-14891 - Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking
- SS-EN-1806 - Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
- SS-EN-1992-1-2 - Eurocode 2 - Design of concrete structures Part 1-2: Structural fire design
- SS-EN-539-1 - Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 1: Impermeability test
- SS-EN-539-2 - Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2: Test for frost resistance
- SS-EN-771-1 - Specification for masonry units - Part 1: Clay masonry units
- SS-EN-771-2 - Specification for masonry units - Part 2: Calcium silicate masonry units
- SS-EN-771-3 - Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
- SS-EN-771-4 - Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
- SS-EN-771-5 - Specification for masonry units - Part 5: Manufactured stone masonry units
- SS-EN-771-6 - Specification for masonry units - Part 6: Natural stone masonry units
- SS-EN-772-1 - Methods of test for masonry units - Part 1: Determination of compressive strength
- SS-EN-772-16 - Methods of test for masonry units - Part 16: Determination of dimensions
- SS-EN-772-18 - Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units
- SS-EN-772-22 - Methods of test for masonry units - Part 22: Determination of freeze/thaw resistance of clay masonry units
- SS-EN-772-5 - Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units
- SS-EN-772-7 - Methods of test for masonry units - Part 7: Determination of water absorption of clay masonry damp proof course units by boiling in water
- SS-EN-ISO-10545-1 - Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:2014)
- SS-EN-ISO-10545-10 - Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10:2021)
- SS-EN-ISO-10545-11 - Ceramic tiles - Part 11: Determination of crazingresistance for glazed tiles (ISO 10545-11:1994)
- SS-EN-ISO-10545-12 - Ceramic tiles - Part 12: Determination of frost resistance (ISO 10545-12:1995, incl. Technical Corrigendum 1:1997)
- SS-EN-ISO-10545-13 - Ceramic tiles - Part 13: Determination of chemical resistance (ISO 10545-13:2016)
- SS-EN-ISO-10545-14 - Ceramic tiles - Part 14: Determination of resistance to stains (ISO 10545-14:2015)
- SS-EN-ISO-10545-15 - Ceramic tiles - Part 15: Determination of lead and cadmium given off by tiles (ISO 10545-15:2021)
- SS-EN-ISO-10545-16 - Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-16:2010)
- SS-EN-ISO-10545-18 - Ceramic tiles - Part 18: Determination of Light Reflectance Value (LRV) (ISO 10545-18:2022)
- SS-EN-ISO-10545-2 - Ceramic tiles - Part 2: Determination of dimensions and surface quality (ISO 10545-2:2018)
- SS-EN-ISO-10545-20 - Ceramic tiles - Part 20: Determination of deflection of ceramic tiles for calculating their radius of curvature (ISO 10545-20:2022)
- SS-EN-ISO-10545-3 - Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018)
- SS-EN-ISO-10545-4 - Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019)
- SS-EN-ISO-10545-5 - Ceramic tiles - Part 5: Determination of impact resistance by measurement of coefficient of restitution (ISO 10545-5:1996, incl.Technical Corrigendum1:1996)
- SS-EN-ISO-10545-6 - Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:2010)
- SS-EN-ISO-10545-7 - Ceramic tiels - Part 7: Determination of resistance to surface abrasion for glazed tiles
- SS-EN-ISO-10545-8 - Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO 10545-8:2014)
- SS-EN-ISO-10545-9 - Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:2013)
- SS-EN-ISO-75-3 - Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates (ISO 75-3:2004)
- SS-ISO-17721-1 - Quantitative determination of antibacterial activity of ceramic tile surfaces Test methods Part 1: Ceramic tile surfaces with incorporated antibacterial agents (ISO 17721-1:2021, IDT)
- SS-ISO-17721-2 - Quantitative determination of antibacterial activity of ceramic tile surfaces Test methods Part 2: Ceramic tile surfaces with incorporated photocatalytic antibacterial agents (ISO 17721-2:2021, IDT)
- SS-ISO/IEC-10021-4 - Information technology - Text communication - Message-oriented text interchange systems (MOTIS) - Part 4: Message transfer system: Abstract service definition and procedures - Technical corrigendum 9