ASTM-B547 › Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube (Withdrawn 2019)

ASTM-B547 - 2010 EDITION - CANCELLED
Show Complete Document History

Document Center Inc. is an authorized dealer of ASTM standards.
The following bibliographic material is provided to assist you with your purchasing decision:


This specification covers aluminum and aluminum-alloy formed and arc-welded round tube, made from formed sheet or plate, butt welded by gas-tungsten or gas-metal arc-welding methods with or without the use of filler metal. The tube shall be made by roll forming (or other suitable forming) sheet or plate into a circular contour with the longitudinal edges butted together for welding. The sheet or plate shall be roll-formed so that the edges are butted together in a helical pattern around the circumference of the tube. The edges shall be welded together by a gas-shielded-arc process. Tensile strength, yield strength, and elongation of the specimens shall be determined by tension test. Specimens may be subjected to a pressure test and a radiographic examination.

ORDER

Want this as a site license?

Scope

1.1 This specification covers aluminum and aluminum-alloy (Note 1) formed and arc-welded round tube in diameters 9 to 60 in. [230 to 1520 mm], made from formed sheet or plate, butt welded by gas-tungsten or gas-metal arc-welding methods with or without the use of filler metal.

Note 1—Throughout this specification use of the term alloy in the general sense includes aluminum as well as aluminum alloy.

Note 2—The requirements for the sheet and plate used are the same as in Specifications B209 or B209M.

1.2 Alloy and temper designations are in accordance with ANSI H35.1/H35.1M. The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E527.

1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4.1 The SI units are shown either in brackets or in separate tables.

Keywords

aluminum alloy; arc-welded tube; Aluminum alloys (tube)--specifications; Aluminum tube--specifications; Arc-welded tube; UNS A91100 (Wr. alum. alloy)--tube; UNS A93003 (Wr. alum. alloy)--tube; UNS A93004 (Wr. alum. alloy)--tube; UNS A95050 (Wr. alum. alloy)--tube; UNS A95052 (Wr. alum. alloy)--tube; UNS A95083 (Wr. alum. alloy)--tube; UNS A95086 (Wr. alum. alloy)--tube; UNS A95154 (Wr. alum. alloy)--tube; UNS A95454 (Wr. alum. alloy)--tube; UNS A96061 (Wr. alum. alloy)--tube; UNS A97072 (Wr. alum. alloy)--tube; ICS Number Code 77.150.10 (Aluminium products)

To find similar documents by ASTM Volume:

02.02 (Aluminum and Magnesium Alloys)

To find similar documents by classification:

77.150.10 (Aluminium products)

This document comes with our free Notification Service, good for the life of the document.

This document is available in either Paper or PDF format.

Document Number

ASTM-B547/B547M-10

Revision Level

2010 EDITION

Status

Cancelled

Modification Type

Withdrawn

Publication Date

May 1, 2010

Document Type

Specification

Page Count

11 pages

Committee Number

B07.03