ASTM-D2832 › Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
The following bibliographic material is provided to assist you with your purchasing decision:
Scope
1.1 This guide is intended to aid in the selection of the proper ASTM standard for determining the volatile and nonvolatile content of paint and related coatings.
Note 1: Test methods for determining the composition of the volatile fraction are not covered by this guide.
1.2 The standards included are as follows:
Type of Coating | Section | ASTM |
|
|
|
Aerosol coatings | 4.1 | D3062 |
Architectural wall coatings, interior, high | 4.3 | D1644 |
Asphalt roof coatings | 4.4 | D2823 |
Asphalt roof coatings, aluminum-pigmented | 4.5 | D2824 |
Bitumens, emulsified | 4.6 | D2939 |
Bleached lac varnish | 4.7 | D1650 |
Coil coatings | 4.8 | D1353 |
Electrical insulation varnishes | 4.9 | D115 |
House paints, gloss |
| D2697 |
Industrial baking enamel |
| D2697 |
Lacquers, clear and pigmented | 4.11 | D1644 |
Latex paint, exterior |
| D2697 |
Latex paint, interior |
| D2697 |
Magnet wire enamels | 4.12 | D3288 |
Plastics, coatings for | 4.13 | D1644 |
Powder coatings | 4.14 | D3451 |
Shellac varnish, orange | 4.7 | D1650 |
Silanes, Siloxanes and Silane-Siloxane Blends | 4.18 | D5095 |
Solvent-reducible coatings | 4.2 | D2369 |
Traffic paints | 4.15 | D2205 |
Varnishes | 4.16 | D1644 |
Wall and trim enamels, interior semigloss, solvent-based | 4.17 | D2697 |
Wall paints, flat | 4.10 | D2697 |
Water-reducible coatings | 4.2 | D2369 |
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Significance and Use
3.1 The nonvolatile content of paint and related coatings is useful to producers and users and to environmental and health and safety interests in comparing the coverage of competing products and in estimating the volatile organic content.
Keywords
nonvolatile content of paints and related coatings; volatile content of paints and related coatings;; ICS Number Code 87.040 (Paints and varnishes)
To find similar documents by ASTM Volume:
06.01 (Paint -- Tests for Chemical, Physical, and Optical Properties; Appearance)
To find similar documents by classification:
87.040 (Paints and varnishes Including coating powders, paint coatings and protective paint systems)
This document comes with our free Notification Service, good for the life of the document.
This document is available in either Paper or PDF format.
Customers who bought this document also bought:
NAS-410NAS Certification and Qualification of Nondestructive Test Personnel
MIL-H-7199
Heat Treatment of Wrought Copper-Beryllium Alloys, Process for (Copper Alloys: Numbers C17000, C17200, C17300, C17500, and C17510) (Superseded by SAE-AMS-H-7199)
DODISS-CD-ROM-SUBSCR
Department of Defense Index of Specifications and Standards - No Longer Available
Document Number
ASTM-D2832-92(2016)
Revision Level
1992 R16 EDITION
Status
Current
Modification Type
Reapproval
Publication Date
April 1, 2016
Document Type
Guide
Page Count
3 pages
Committee Number
D01.21