ASTM-E1473 › Historical Revision Information
Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys
Show Complete Document History
The following bibliographic material is provided to assist you with your purchasing decision:
1.1 These test methods describe the chemical analysis of nickel, cobalt, and high-temperature alloys having chemical compositions within the following limits:Element Concentration Range, % Aluminum 0.005 to 7.00 Beryllium 0.001 to 0.05 Boron 0.001 to 1.00 Calcium 0.002 to 0.05 Carbon 0.001 to 1.10 Chromium 0.10 to 33.00 Cobalt 0.10 to 75.00 Copper 0.01 to 35.00 Iron 0.01 to 50.00 Lead 0.001 to 0.01 Magnesium 0.001 to 0.05 Manganese 0.01 to 3.0 Molybdenum 0.01 to 30.0 Niobium (Columbium) 0.01 to 6.0 Nickel 0.10 to 98.0 Nitrogen 0.001 to 0.20 Phosphorus 0.002 to 0.08 Sulfur 0.002 to 0.10 Silicon 0.01 to 5.00 Tantalum 0.005 to 1.00 Tin 0.002 to 0.10 Titanium 0.01 to 5.00 Tungsten 0.01 to 18.00 Vanadium 0.01 to 3.25 Zinc 0.001 to 0.01 Zirconium 0.01 to 2.50
1.2 The test methods in this standard are contained in the sections indicated as follows:Sections Aluminum, Total by the 8-Quinolinol Gravimetric Method (0.20 to 7.00%) 2 62 to 69 Chromium by the Atomic Absorption Method (0.018 to 1.00%) 2 100 to 109 Chromium by the Peroxydisulfate Oxidation-Titration Method (0.10 to 33.00%) 2 110 to 118 Cobalt by the Ion-Exchange-Potentiometric Titration Method (2 to 75%) 2 34 to 41 Cobalt by the Nitroso-R-Salt Photometric Method (0.10 to 5.0%) 2 42 to 51 Copper by Neocuproine Photometric Method (0.010 to 10.00%) 2 52 to 61 Iron by the Silver Reduction Titrimetric Method (1.0 to 50.0%) 2 127 to 134 Manganese by the Metaperiodate Photometric Method (0.05 to 2.00%) 2 8 to 17 Molybdenum by the Ion Exchange-8-Hydroxyquinoline Gravi- metric Method (1.5 to 30%) 2 119 to 126 Molybdenum by the Photometric Method (0.01 to 1.50%) 2 88 to 99 Nickel by the Dimethylglyoxime Gravimetric Method (0.1 to 84.0%) 2 70 to 77 Niobium by the Ion Exchange-Cupferron Gravimetric Method (0.5 to 6.0%) 135 to 142 Silicon by the Gravimetric Method (0.05 to 5.00%) 2 27 to 33 Sulfur by the Combustion-Iodate Titration Method (0.006 to 0.1%) 2 18 to 26 Tin by the Solvent Extraction-Atomic Absorption Method (0.002 to 0.10%) 2 78 to 87
1.3 Methods for the determination of several elements not included in these test methods can be found in Test Methods E30, E76, and E1019.
1.4 Some of the concentration ranges given in 1.1 are too broad to be covered by a single method, and therefore, these test methods contain multiple methods for some elements. The user must select the proper test method by matching the information given in the scope and interference sections of each test method with the composition of the alloy to be analyzed.
1.5 The values stated in SI units are to be regarded as standard. In some cases, exceptions allowed in Practice E380 are also used.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7 and in special caution and warning paragraphs throughout these test methods.
Aluminum content; Aluminum content-Ni/Ni alloys; total aluminum in nickel/cobalt/high temperature alloys, test,; Chemical analysis-metals/alloys; Cobalt alloys; Gravimetric method; High temperature alloys; Ion exchange; Nickel alloys-chemical analysis; Photometry; Titration; chemical analysis of nickel/cobalt/high temperature alloys, test,; Chromium content-miscellaneous metals/alloys; Chromium content-Ni/Ni alloys; Spectrophotometry-atomic absorption; Tin content-metals/alloys; Tin content-Ni/Ni alloys; tin/chromium in nickel/cobalt/high temperature alloys, by atomic; absorption spectrophotometry, test,; Cobalt content-miscellaneous metals/alloys; Cobalt content-Ni/Ni alloys; cobalt in nickel/cobalt/high temperature alloys, test,; Iron content-miscellaneous metals/alloys; Iron content-Ni/Ni alloys; iron in nickel/cobalt/high temperature alloys, by silver reduction; titrimetric method, test,; Manganese content-miscellaneous metals/alloys; Manganese content-Ni/Ni alloys; manganese in nickel/cobalt/high temperature alloys, test,; Molybdenum content-miscellaneous metals/alloys; Molybdenum content-Ni/Ni alloys; molybdenum in nickel/cobalt/high temperature alloys, test,; Nickel content-miscellaneous metals/alloys; Nickel content-Ni/Ni alloys; nickel in nickel/cobalt/high temperature alloys, test,; Silicon content-miscellaneous metals/alloys; Silicon content-Ni/Ni alloys; silicon in nickel/cobalt/high temperature alloys, test,; Sulfur content-miscellaneous metals/alloys; Sulfur content-Ni/Ni alloys; sulfur in nickel/cobalt/high temperature alloys, test; ICS Number Code 77.120.40 (Nickel, chromium and their alloys)
To find similar documents by ASTM Volume:
To find similar documents by classification:
This document comes with our free Notification Service, good for the life of the document.
This document is available in either Paper or PDF format.
July 15, 1994