ASTM-F2212 Historical Revision Information
Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)

ASTM-F2212 - 2019 EDITION - SUPERSEDED
Show Complete Document History

Document Center Inc. is an authorized dealer of ASTM standards.
The following bibliographic material is provided to assist you with your purchasing decision:

Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)
ORDER

Scope

1.1 This guide for characterizing collagen-containing biomaterials is intended to provide characteristics, properties, and test methods for use by producers, manufacturers, and researchers to more clearly identify the specific collagen materials used. With greater than 20 types of collagen and the different properties of each, a single document would be cumbersome. This guide will focus on the characterization of Type I collagen, which is the most abundant collagen in mammals, especially in skin and bone. Collagen isolated from these sources may contain other types of collagen, for example, Type III and Type V. This guide does not provide specific parameters for any collagen product or mix of products or the acceptability of those products for the intended use. The collagen may be from any source including, but not limited to, animal or cadaveric sources, human cell culture, or recombinant sources. The biological, immunological, or toxicological properties of the collagen may vary, depending on the source material. The properties of the collagen prepared from each of the above sources must be thoroughly investigated, as the changes in the collagen properties as a function of source materials is not thoroughly understood. This guide is intended to focus on purified Type I collagen as a starting material for surgical implants and substrates for tissue engineered medical products (TEMPs); some methods may not be applicable for gelatin or tissue implants. This guide may serve as a template for characterization of other types of collagen.

1.2 The biological response to collagen in soft tissue has been well documented by a history of clinical use (1, 2)2 and laboratory studies (3, 4, 5, 6). Biocompatibility and appropriateness of use for a specific application(s) is the responsibility of the product manufacturer.

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 Warning—Mercury has been designated by EPA and many state agencies as a hazardous material that can cause central nervous system, kidney, and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury-containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPA’s website (http://www.epa.gov/mercury/faq.htm) for additional information. Users should be aware that selling mercury or mercury-containing products, or both, in your state may be prohibited by state law.

1.5 The following precautionary caveat pertains only to the test method portion, Section 5, of this guide. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Significance and Use

4.1 The objective of this guide is to provide guidance in the characterization of Type I collagen as a starting material for surgical implants and substrates for tissue engineered medical products (TEMPs). This guide contains a listing of physical and chemical parameters that are directly related to the function of collagen. This guide can be used as an aid in the selection and characterization of the appropriate collagen starting material for the specific use. Not all tests or parameters are applicable to all uses of collagen.

4.2 The collagen covered by this guide may be used in a broad range of applications, forms, or medical products, for example (but not limited to) medical devices, tissue engineered medical products (TEMPs) or cell, drug, or DNA delivery devices for implantation. The use of collagen in a practical application should be based, among other factors, on biocompatibility and physical test data. Recommendations in this guide should not be interpreted as a guarantee of clinical success in any tissue engineered medical product or drug delivery application.

4.3 The following general areas should be considered when determining if the collagen supplied satisfies requirements for use in TEMPs. These are source of collagen, chemical and physical characterization and testing, and impurities profile.

4.4 The following documents or other appropriate guidances from appropriate regulatory bodies relating to the production, regulation, and regulatory approval of TEMPs products should be considered when determining if the collagen supplied satisfies requirements for use in TEMPs:

FDA CFR:

21 CFR 3: Product Jurisdiction:

   http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/
    CFRSearch.cfm?CFRPart=3

21 CFR 58: Good Laboratory Practice for Nonclinical Laboratory Studies:

   http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/
    CFRSearch.cfm?CFRPart=58

 

FDA/CDRH CFR and Guidances:

21 CFR Part 803: Medical Device Reporting:

   http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/
    CFRSearch.cfm?CFRPart=803

21 CFR 812: Investigational Device Exemptions:

    http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/
    CFRSearch.cfm?CFRPart=812

21 CFR 814: Premarket Approval of Medical Devices :

   http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/
    CFRSearch.cfm?CFRPart=814

21 CFR 820: Quality System Regulation:

   http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/
    CFRSearch.cfm?CFRPart=820

Design Control Guidance for Medical Device Manufacturers:

   http://www.fda.gov/cdrh/comp/designgd.pdf

Preproduction Quality Assurance Planning Recommendations for
 Medical Device Manufacturers (FDA 90-4236):

   http://www.fda.gov/cdrh/manual/appende.html

The Review and Inspection of Premarket Approval Applications under the
 Bioresearch Monitoring Program—Draft Guidance for Industry and FDA Staff:

   http://www.fda.gov/cdrh/comp/guidance/1602.pdf

 

FDA/CDRH Search Engines:

CDRH Guidance Search Engine:

   http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfggp/search.cfm

CDRH Premarket Approval (PMA) Search Engine:

   http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfPMA/pma.cfm

CDRH 510(k) Search Engine:

   http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfPMN/pmn.cfm

CDRH Recognized STANDARDS Search Engine :

   http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfStandards/search.cfm

 

FDA/CBER CFR and Guidances:

21 CFR 312: Investigational New Drug Application :

   http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/
    CFRSearch.cfm?CFRPart=312

21 CFR 314: Applications for FDA Approval to Market a New Drug:

   http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/
    CFRSearch.cfm?CFRPart=31

21 CFR 610: General Biological Products Standards:

   http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/
    CFRSearch.cfm?CFRPart=610

21 CFR 1271: Human Cells, Tissues and Cellular and Tissue-Based Products:

   http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/
    CFRSearch.cfm?CFRPart=1271

Cellular & Gene Therapy Guidances and Other Publications:

   http://www.fda.gov/cber/genetherapy/gtpubs.htm

Human Tissue Guidances and Other Publications:

   http://www.fda.gov/cber/tissue/docs.htm

CBER Product Approval Information:

   http://www.fda.gov/cber/efoi/approve.htm

21 CFR 600, 601 BLA Regulations:

   http://www.access.gpo.gov/nara/cfr/waisidx_07/21cfrv7_07.html

21 CFR 210, 211 GMP Regulations:

   http://www.access.gpo.gov/nara/cfr/waisidx_07/21cfr210_07.html

Keywords

biomaterials; characterization; collagen; natural materials; TEMPs;

To find similar documents by ASTM Volume:

13.01 (Medical and Surgical Materials and Devices)

To find similar documents by classification:

11.040.40 (Implants for surgery, prosthetics and orthotics Including pacemakers Ophthalmic implants, see 11.040.70)

11.100.99 (Other standards related to laboratory medicine)

This document comes with our free Notification Service, good for the life of the document.

This document is available in either Paper or PDF format.

Document Number

ASTM-F2212-19

Revision Level

2019 EDITION

Status

Superseded

Modification Type

Revision

Publication Date

Nov. 15, 2019

Document Type

Guide

Page Count

14 pages

Committee Number

F04.42