ISO-14911 › Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water
ISO-14911
-
1ST EDITION
-
CURRENT
Document Center Inc. is an authorized dealer of ISO standards.
The following bibliographic material is provided to assist you with your purchasing decision:
The following bibliographic material is provided to assist you with your purchasing decision:
This International Standard specifies a method for the determination of the dissolved cations Li+, Na+ NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ in water (e.g. drinking water, surface water, waste water).
An appropriate pretreatment of the sample (e.g. dilution) and the application of a conductivity detector (CD) make the working ranges given in table 1 feasible.
The applicability of the method for waste water samples should be proved in each case.
| Table 1 - Working ranges of the analytical method | |
|---|---|
| Cation | Typical working range with 10 μl loop mg/l1) |
| Lithium | 0,01 to 1 |
| Sodium | 0,1 to 10 |
| Ammonium | 0,1 to 10 |
| Potassium | 0,1 to 10 |
| Manganese | 0,5 to 50 |
| Calcium | 0,5 to 50 |
| Magnesium | 0,5 to 50 |
| Strontium | 0,5 to 50 |
| Barium | 1 to 100 |
| 1) The working range is limited by the ion-exchange capacity of the separator column.If necessary, the sample shall be diluted to meet the working range, or use a 100 μl loopfor lower working ranges. | |
To find similar documents by classification:
13.060.50 (Examination of water for chemical substances)
This document comes with our free Notification Service, good for the life of the document.
This document is available in either Paper or PDF format.
Document Number
ISO 14911:1998
Revision Level
1ST EDITION
Status
Current
Publication Date
Oct. 1, 1998
Committee Number
ISO TC 147/SC 2/WG 33