SS-EN-ISO-14720-2 › Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow (ISO 14720-2:2013)
SS-EN-ISO-14720-2
-
2013 EDITION
-
CURRENT
Document Center Inc. is an authorized dealer of SIS standards.
The following bibliographic material is provided to assist you with your purchasing decision:
The following bibliographic material is provided to assist you with your purchasing decision:
This standard defines a method for the determination of sulphur in powdered and granular non-oxidic ceramic raw materials and materials, which are completely oxidised at higher temperature in an oxygen atmosphere, e.g. carbon and graphite materials. For materials, which are not completely oxidisable under these conditions, it is possible to determine sulphur,that can be released under these conditions e.g. the adherent sulphur. This standard is applicable for materials with mass contents of sulphur < 10 % and ash contents < 20 %. The defined method is limited for materials with mass contents of barium < 10 mg/kg, because the sulphur bonded in barium sulfate is not detectable with this method. For the lower detection limit of this method a sulphur content of 0.5 mg/kg in case of ICP OES and 5 mg/kg in the case of IC, has to be considered as recommended value.
To find similar documents by classification:
This document comes with our free Notification Service, good for the life of the document.
This document is available in either Paper or PDF format.
Designation Name
SS-EN ISO 14720-2:2013
Revision Level
2013 EDITION
Status
Current
Publication Date
March 11, 2013
Language(s)
English
Page Count
28
International Equivalent
EN ISO 14720-2:2013(IDT); ISO 14720-2:2013(IDT)