SS-EN-ISO-7096 › Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020)
Document Center Inc. is an authorized dealer of SIS standards.
The following bibliographic material is provided to assist you with your purchasing decision:
The following bibliographic material is provided to assist you with your purchasing decision:
1.1 This document specifies, in accordance with ISO 10326-1:2016, a laboratory method for measuring and evaluating the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator of earth-moving machines at frequencies between 1 Hz and 20 Hz. It also specifies acceptance criteria for application to seats on different machines. 1.2 This document is applicable to operator seats used on earth-moving machines as defined in ISO 6165. 1.3 This document defines the input spectral classes required for the following earth-moving machines. Each class defines a group of machines having similar vibration characteristics: rigid-frame dumpers 4 500 kg operating mass; articulated-frame dumpers; scrapers without axle or frame suspension[1]; wheeled loaders 4 500 kg operating mass; graders; wheeled dozers; soil compactors; backhoe loaders; crawler dumpers; crawler loaders; crawler-dozers =50 000 kg operating mass[2]; compact dumpers =4 500 kg operating mass; wheeled compact loaders =4 500 kg operating mass; skid-steer loaders, wheeled =4 500 kg and tracked =6 000 kg operating mass. 1.4 The following machines impart sufficiently low vertical vibration inputs at frequencies between 1 Hz and 20 Hz to the seat during operation that these seats do not require suspension for the attenuation of transmitted vibration: excavators, including walking excavators and cable excavators[3]; trenchers; landfill compactors; non-vibratory rollers, except soil compactors; vibratory rollers, except soil compactors; pipelayers; horizontal directional drills (HDD). 1.5 The tests and criteria defined in this document are intended for operator seats used in earth-moving machines of conventional design. NOTE Other tests can be appropriate for machines with design features that result in significantly different vibration characteristics. 1.6 Vibration which reaches the operator other than...
To find similar documents by classification:
23.020.10 (Stationary containers and tanks)
53.100 (Earth-moving machinery Including tractors, excavators, loaders, graders, etc.)
77.100 (Ferroalloys Including classification, designation, sampling, chemical analysis, etc.)
77.120.40 (Nickel, chromium and their alloys)
Revised Machinery Directive
This document comes with our free Notification Service, good for the life of the document.
This document is available in either Paper or PDF format.
Designation Name
SS-EN ISO 7096:2020
Revision Level
2020 EDITION
Status
Current
Publication Date
March 26, 2020
Language(s)
English
Page Count
36
International Equivalent
EN ISO 7096:2020(IDT); ISO 7096:2020(IDT)