Document Center is acquired by Nimonik

Document Center List of Standards on Fasteners For Aerospace Construction Fasteners For General Use, See 21.060

ICS Code 49.030

Return to ICS Index.

Up to Level 1:

• 49 (AIRCRAFT AND SPACE VEHICLE ENGINEERING)

Down to Level 3:

• 49.030.01 (Fasteners in general)
• 49.030.10 (Screw threads Screw threads for general use, see 21.040)
• 49.030.20 (Bolts, screws, studs)
• 49.030.30 (Nuts)
• 49.030.40 (Pins, nails)
• 49.030.50 (Washers and other locking elements)
• 49.030.60 (Rivets)
• 49.030.99 (Other fasteners)

The following documents are a part of this series:

Other SDOs:

• SS-EN-2139 - Aerospace series - Washers, flat heat resisting steel
• SS-EN-2143 - Aerospace series - Rivets, solid, universal head,in aluminium 1050A, inch based series
• SS-EN-2146 - Aerospace series - Rivets, solid, universal head,in aluminium alloy 2017A, inch based series
• SS-EN-2148 - Aerospace series - Rivets, solid, universal head,in aluminium alloy 5056A, inch based series
• SS-EN-2236 - Flyg- och rymdteknik - Passkruvar med huvud, av legerat st+l - Teknisk specifikation
• SS-EN-2309 - Aerospace series - Hole sizes for solid rivets
• SS-EN-2328 - Aerospace series - Washers, lock, with radial serrations in alloy steel, cadmium plated for flight control rods - Dimensions
• SS-EN-2363 - Aerospace series - Locking clips for turnbuckles of control cables - Dimensions
• SS-EN-2364 - Aerospace series - Pins, shear, headed, close tolerance
• SS-EN-2365 - Aerospace series - Collars, aluminium alloy
• SS-EN-2367 - Aerospace series - Split pins in steel EN 2573
• SS-EN-2413 - Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel cadmiumplated - Classification: 1100 MPa (at ambient temperature) / 235 degrees Celsius
• SS-EN-2498 - Aerospace series - Rod-ends, adjustable, self-aligning, plain bearing with self-lubricating liner and threaded shank - Dimensions and loads
• SS-EN-2515 - Aerospace series - Rod-ends, adjustable single fork and threaded shank - Dimensions and loads
• SS-EN-2546 - Aerospace series - Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions
• SS-EN-2549 - Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 oC
• SS-EN-2550 - Aerospace series - Rivets, solid, 100 degrees normal countersunk head, in aluminium 1050A, inch based series
• SS-EN-2551 - Aerospace series - Rivets, solid, 100 degrees normal countersunk head with dome, in aluminium alloy2117, inch based series
• SS-EN-2552 - Aerospace series - Rivets, solid, 100 degrees normal countersunk head with dome, in aluminium alloy2117, anodized or chromated, inch based series
• SS-EN-2553 - Aerospace series - Rivets, solid, 100 degrees normal countersunk head with dome, in aluminium alloy2017A, inch based series
• SS-EN-2555 - Aerospace series - Rivets, solid, 100 degrees normal countersunk head with dome, in aluminium alloy5056A, inch based series
• SS-EN-2556 - Aerospace series - Rivets, solid, 100 degrees countersunk head with dome, in aluminium alloy 5056A,anodized or chromated, inch based series
• SS-EN-2583 - Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa (at ambient temperature)/650°C - Technical specification
• SS-EN-2586 - Aerospace series - Washers, lock for flight controls rods - Dimensions
• SS-EN-2587 - Aerospace series - Rod-ends, adjustable doublefork and threaded shank - Dimensions and loads
• SS-EN-2596 - Aerospace series - Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods - Dimensions
• SS-EN-2647 - Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 oC
• SS-EN-2648 - Aerospace series - Washers, concave, in alloy steel, cadmium plated
• SS-EN-2649 - Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 235 degrees Celsius
• SS-EN-2652 - Aerospace series - Screws, 100 degrees countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) /235 degrees Celsius
• SS-EN-2752 - Aerospace series - Nuts, anchor, self locking fixed, two lug, reduced series, with counterbore - Classification: 1100 MPa/235 degrees C
• SS-EN-2790 - Aerospace series - Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1,5 x thread diameter - Dimensions and loads
• SS-EN-2791 - Aerospace series - Rod ends, adjustable, single fork and threaded shank with engagement: 1,5 x thread diameter - Dimensions and loads
• SS-EN-2792 - Aerospace series - Rod ends, adjustable, double fork and threaded shank with engagement: 1,5 x thread diameter - Dimensions and loads
• SS-EN-2859 - Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 degrees C
• SS-EN-2884 - Aerospace series - Screws, pan head, offset cruciform recess, coarsetolerance normal shank, short thread, in titaniumalloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 degreesCelsius
• SS-EN-2885 - Aerospace series - Screws, pan head, offset cruciform recess, coarsetolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 235 degrees Celsius
• SS-EN-2887 - Aerospace series - Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-2888 - Aerospace series - Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) /425 degrees C
• SS-EN-2889 - Aerospace series - Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 degrees C
• SS-EN-2907 - Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa (at ambient temperature) / 650 degrees Celsius
• SS-EN-2909 - Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100MPa (at ambient temperature) / 650 degrees Celsius
• SS-EN-2911 - Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperatur) / 650 degrees Celsius
• SS-EN-2912 - Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated
• SS-EN-2913 - Aerospace series - Washers, flat, large diameter, in alloy steel, cadmium plated
• SS-EN-2914 - Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated
• SS-EN-2926 - Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature) / 650 degrees Celsius
• SS-EN-2927 - Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), - Classification: 1275 MPa (at ambient temperature) / 650 degrees Celsius
• SS-EN-2928 - Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification:1275 MPa (at ambient temperature) / 650 degrees Celsius
• SS-EN-2929 - Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), - Classification: 1210 MPa (at ambient temperature) / 730 degrees Celsius
• SS-EN-2930 - Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature) / 730 degrees Celsius
• SS-EN-2932 - Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated- Classification: 900 MPa (at ambient temperature)/650 degrees Celsius
• SS-EN-2933 - Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 degrees Celsius
• SS-EN-2934 - Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (atambient temperature)/650 degrees Celsius
• SS-EN-2935 - Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 degrees Celsius
• SS-EN-2936 - Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 degrees Celsius
• SS-EN-2938 - Aerospace series - Screws, hexagon, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 9100 MPa (at ambient temperature) / 650 degrees Celsius
• SS-EN-2939 - Aerospace series - Screws, 100 degrees countersunk head, offset cruciform recess, threaded to head,in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 degrees Celsius
• SS-EN-2940 - Aerospace series - Screws, 100 degrees countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature) / 650 degrees Celsius
• SS-EN-2998 - Aerospace series - Washers, flat, in heat resisting steel, passivated
• SS-EN-3004 - Aerospace series - Nuts, self-locking, MJ threads, in heat resistingsteel FE-PA2601(A286) - Classification: 1100 MPa (at ambient temperature) /650 degrees Celsius - Technical specification
• SS-EN-3006 - Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 degrees Celsius
• SS-EN-3007 - Aerospace series - Bolts, hexagon head, relieved shank, long thread,in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature) / 650 degrees Celsius
• SS-EN-3012 - Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1 210 MPa (at ambient temperature) / 730 degrees Celsius
• SS-EN-3013 - Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1 210 MPa (at ambient temperature) / 730 degrees Celsius
• SS-EN-3052 - Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-3063 - Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heatresisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 degrees Celsius
• SS-EN-3112 - Aerospace series - Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 235 degrees Celsius
• SS-EN-3135 - Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA 11, passivated, inch based series
• SS-EN-3136 - Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA92HT, passivated, inch based series
• SS-EN-3138 - Aerospace series - Rivets, solid, 100º countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series
• SS-EN-3141 - Aerospace series - Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, cadmium plated, inch based series
• SS-EN-3142 - Aerospace series - Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series
• SS-EN-3196 - Aerospace series - Nuts, hexagonal, self-locking,in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 degrees Celsius
• SS-EN-3202 - Aerospace series - Holes and traps for T-head bolts - Design standard
• SS-EN-3239 - Aerospace series - Nuts, bihaxagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1 210 MPa (at ambient temperature) / 730 degrees Celsius
• SS-EN-3303 - Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) /235 degrees Celsius
• SS-EN-3377 - Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-3379 - Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature) / 730 degrees Celsius
• SS-EN-3380 - Aerospace series - Rings, retaining - Technical specification
• SS-EN-3543 - Aerospace series - Screws, 100 degrees countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature) /425 degrees C
• SS-EN-3611 - Aerospace series - Spigots - Dimensions and fit selection - Design standard
• SS-EN-3720 - Aerospace serie - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-3721 - Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-3722 - Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)
• SS-EN-3723 - Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 degrees Celsius
• SS-EN-4069 - Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature) /650 degrees Celsius
• SS-EN-4265 - Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series
• SS-ISO-17057 - Aerospace - Rivets, solid - Test methods
• SS-ISO-245 - Aerospace - Lockwire - Diameters
• SS-ISO-3168 - Aerospace - Self-locking, fixed, single-lug anchor nuts with counterbore, classification 1100 MPa/235 degrees C
• SS-ISO-3191 - Aerospace - Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C - Dimensions
• SS-ISO-3209 - Aerospace - Nuts, anchor, self-locking, floating,two-lug, with counterbore, with MJ threads, coated or uncoated, classification 1100 MPa/235 degreesC, 1100 MPa/315 degrees C or 1100 MPa/425 degreesC - Dimensions
• SS-ISO-3221 - Aerospace - Nuts, anchor, self-locking, fixed, 90degree corner, with counter bore, with MJ threads, coated or uncoated, classification 1100 MPa/235 degrees C, 1100 MPa/315 degrees C or 1100 MPa/425 degrees C - Dimensions
• SS-ISO-3222 - Aerospace - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C - Dimensions
• SS-ISO-3223 - Aerospace - Nuts, anchor, self-locking, fixed, two-lug, with counterbore, with MJ threads, coated or uncoated, classification 1100 MPa/235 degrees C,1100 MPa/315 degrees C or 1100 MPa/425 degrees C - Dimensions
• SS-ISO-3224 - Aerospace - Self-locking, floating, single-lug anchor nuts, with counterbore, classification 1100 MPa/235 degrees C
• SS-ISO-3225 - Aerospace - Self-locking, fixed, two lug anchor nuts, reduced series, with counterbore, strength classification 1100 MPa and maximum operating temperature 235 degrees C
• SS-ISO-4147 - Metric fasteners for aerospace construction - Hexagon slotted (castellated) nuts - Strength classification 1 100 MPa - Maximum operating temperature 235 centigrades
• SS-ISO-5845-2 - Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment
• SS-ISO-5855-3 - Aerospace - MJ threads - Part 3: Limit dimensions for fittings for fluids systems
• SS-ISO-5857 - Aerospace - Alloy steel protruding head bolts with strength classification 1250 MPa and MJ threads - Procurement specification
• SS-ISO-5858 - Aerospace - Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C - Procurement specification
• SS-ISO-7332 - Metric fasteners for aerospace construction - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore - Strength classification 1100 MPa - Maximum operating temperature 235 degrees C
• SS-ISO-7403 - Aerospace - Spline drives - Wrenching configuration - Metric series
• SS-ISO-7481 - Aerospace - Self-locking nuts with maximum operating temperature less than or equal to 425 degrees Celsius - Test methods
• SS-ISO-7913 - Aerospace - Bolts and screws, metric - Tolerancesof form and position
• SS-ISO-7995 - Aerospace - Nuts, hexagonal, self-locking, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 °C, 1 100 MPa (at ambient temperature)/315 °C and 1 100 MPa (at ambient temperature)/425 °C - Dimensions
• SS-ISO-8279 - Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/730 degrees C, 1 250 MPa (at ambient temperature)/235 degrees C a
• SS-ISO-8538 - Aerospace - Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C - Dimensions
• SS-ISO-8641 - Aerospace - Self-locking nuts with maximum operating temperature greater than 425 degrees C - Procurement specification
• SS-ISO-8642 - Aerospace - Self-locking nuts with maximum operating temperature greater than 425 degrees C - Test methods
• SS-ISO-8788 - Aerospace - Nuts, metric - Tolerances of form and position
• SS-ISO-8940 - Aerospace - Nuts, anchor, self-locking, sealing, floating, two-lug, with counterbore, classifications 900 MPa/120 degrees C, 900 MPa/175 degrees C and 900 MPa/235 degrees C - Dimensions
• SS-ISO-9156 - Aerospace - Nuts, anchor, self-locking, fixed, 90degrees corner, reduced series, with counterbore,with MJ threads, coated, classification 1100 MPa/225 degrees C, 1100 MPa/315 degrees C or 1100 MPa/425 degrees C - Dimensions
• SS-ISO-9199 - Aerospace - Nuts, bihexagonal, self-locking, MJ threads, classifications: 1 100 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/425 degrees C, 1 210 MPa (at ambient temperature)/730 degrees C, 1 550 MPa (at ambient temperature)/235 degrees C, 1 550 MPa (at ambient temperature)/425 degrees C and 1 550 MPa (at ambient temperature)/600 degrees C - Dimensions