Document Center is acquired by Nimonik

Document Center List of Standards on Bolts, Screws, Studs

ICS Code 49.030.20

Return to ICS Index.

Up to Level 2:

• 49.030 (Fasteners for aerospace construction Fasteners for general use, see 21.060)

The following documents are a part of this series:

BSI:

• BS-2A-173 - Specification for 100 Countersunk head steel bolts (Unified threads), cadmium plated, for aircraft
• BS-2A-174 - Specification for 100-¦ countersunk head corrosion-resisting steel bolts (Unified threads) for aircraft
• BS-2A-212 - Specification for cadmium-plated steel bolts, 55/65 tonf/in² (Unified hexagons, 3A Unified threads and close tolerance shanks) for aerospace use
• BS-2A-241 - General requirements for steel protruding-head bolts of tensile strength 1250 MPa (180000 lbf/in2) or greater. Specification
• BS-2A-25 - Specification for steel hexagonal-headed bolts (B.A. and B.S.F. threads) for aircraft
• BS-2A-26 - Specification for corrosion-resisting steel hexagonal-headed bolts (B.A and B.S.F. threads) for aircraft
• BS-2A-(260-265) - Aerospace Series, Specification for Pan & 100 Degrees Countersunk Slotted Head Screws
• BS-2A-260-2A-265 - Specification for pan and 100 countersunk slotted head screws with ISO metric screw threads
• BS-2A-266-2A-271 - Bolt, 100 Countersunk head, Hi-Torque speed drive recess, UNJF thread , split pin hole option, titanium alloy, various finishes, Classification: 80 Tf/in² (1 100 MPa) at T_A/+315 C
• BS-2A-30 - Specification for steel hexagonal-headed bolts (B.A. and B.S.F threads) with close tolerance shanks for aircraft
• BS-2A-57 - Specification for steel hexagonal-headed shear bolts (B.S.F. threads) for aircraft
• BS-2A-59 - Specification for cadmium-plated steel hexagonal-headed bolts (B.A. and B.S.F. threads) with close tolerance shanks for aircraft
• BS-2A-60 - Specification for cadmium-plated steel hexagonal-headed shear bolts (B.S.F. threads) for aircraft
• BS-2A-61 - Specification for aluminium alloy hexagonal headed bolts (B.A. and B.S.F. threads) for aircraft
• BS-3A-102 - Specification for steel bolts (Unified hexagons and Unified threads) for aircraft
• BS-3A-104 - Specification for corrosion-resisting steel bolts (Unified hexagons and Unified threads) for aircraft
• BS-3A-108 - Specification for steel bolts (Unified hexagons and Unified threads) with close tolerance shanks for aircraft
• BS-3A-109 - Specification for steel shear bolts (Unified hexagons and Unified threads)
• BS-3A-111 - Specification for cadmium-plated steel bolts (Unified hexagons and Unified threads) with close tolerance shanks for aircraft
• BS-3A-112 - Specification for cadmium-plated steel shear bolts (Unified hexagons and Unified threads)
• BS-3A-113 - Specification for steel mushroom head bolts (Unified threads) for aircraft
• BS-3A-114 - Specification for corrosion-resisting steel mushroom head bolts (Unified threads) for aircraft
• BS-3A-116 - Specification for steel pan head bolts (Unified threads) for aircraft
• BS-3A-117 - Aerospace Series. Bolts, Pan Head, Slotted Drive, Unified Threads, Corrosion Resisting Steel, Strength Class 880 MPa, for Aircraft. Specification
• BS-3A-170 - Specification for aluminium alloy mushroom head bolts (Unified threads) for aircraft
• BS-3A-171 - Specification for aluminium alloy pan head bolts (Unified threads) for aircraft
• BS-3A-174 - 100 Countersunk head, D-slot recess, corrosion-resisting steel bolts (Unified threads), Strength Class 880 MPa, for aircraft
• BS-3A-212 - Specification for cadmium-plated steel bolts, 55/65 tonf/in
• BS-3A-228 - Specification for steel double hexagon bolts 1250 MPa (180 000 lbf/in2) for aircraft
• BS-4A-100 - Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
• BS-4A-102 - Specification for steel bolts (Unified hexagons and Unified threads) for aircraft
• BS-4A-104 - Specification for corrosion-resisting steel bolts (Unified hexagons and Unified threads), strength class 880 MPa, for aircraft
• BS-4A-111 - Specification for cadmium-plated steel bolts (Unified hexagons and Unified threads) with close tolerance shanks
• BS-4A-112 - Aerospace series. Specification for shear bolts, hexagonal heads (Unified threads) in cadmium-plated steel (Classification Rm = 880-1080 MPa)
• BS-4A-113 - Specification for cadmium-plated, mushroom-headed, unified-thread, slotted drive bolts
• BS-4A-114 - Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts, strength class 880 MPa
• BS-4A-116 - Steel pan head bolts (Unified threads), cadmium plated, for aircraft
• BS-4A-169 - Aerospace series. Specification for Bolts, Hexagonal heads (Unified threads) in aluminium alloy, anodized
• BS-4A-169-TC - Aerospace series. Specification for Bolts, Hexagonal heads (Unified threads) in aluminium alloy, anodized
• BS-4A-170 - Specification for aluminium alloy, mushroom-headed, slotted drive, bolts (unified thread)
• BS-4A-228 - Specification for steel double hexagon bolts. 1250 MPa (180,000 lbf/in$u2) for aircraft
• BS-A-101 - Specification for general requirements for titanium bolts
• BS-A-108 - Bolts, shear, hexagonal heads, close tolerance shank, unified threads, low alloy steel, cadmium plated (on head and thread only). Specification
• BS-A-108-TC - Tracked Changes. Bolts, shear, hexagonal heads, close tolerance shank, unified threads, low alloy steel, cadmium plated (on head and thread only). Specification. Classification Rm = 123 200. 145 600 lbf/in2 (850 â?? 1 004 MPa) at ambient temperature ; +190°C.
• BS-A-109 - AEROSPACE SERIES Bolts, shear, hexagonal heads, close tolerance shank, unified threads, alloy steel, cadmium plated (on head and thread only). Specification
• BS-A-211 - Specification for 100 countersunk head steel bolts (Unified threads and cruciform recesses) for aircraft
• BS-A-226 - Specification for steel hexagon head bolts (short thread: Class 3A)
• BS-A-227 - Specification for steel pan head bolts (short thread: Class 3A)
• BS-A-232 - Specification for 100 countersunk head steel bolts (160 000 lbf/in² (110 hbar) with Torq-set recesses)
• BS-A-241 - General Requirements for Steel Protruding-Head Bolts of Tensile Strength 1250 Mpa (180
• BS-A-254 - Specification, Hexagonal Head Titanium Alloy Bolts 160 000 Ibf/in2 (1100 Mpa)
• BS-A-254-A-255 - Specification. Hexagonal head titanium alloy bolts 160 000 lbf/in$u2 (1100 MPa)
• BS-A-260 - Specification for Metric Screws
• BS-A-260-261 - Specification for Metric Screws
• BS-A-266 - Specification for 100 Degree Countersunk Head Titanium Alloy Bolts 160 000 Ibf/in2 (11
• BS-A-266-A267 - Specification for 100° countersunk head titanium alloy bolts 160 000 lbf/in$u2 (1100 MPa) with Hi-torque speed drive recesses
• BS-A-266-A-267 - Specification for 100° countersunk head titanium alloy bolts 160 000 lbf/in$u2 (1100 MPa) with Hi-torque speed drive recesses
• BS-A-274 - Specification for procurement of alloy steel bolts, metric, with a minimum tensile strength of 1100 MPa
• BS-A-287-A-288 - Specification for hexagon socket head cap screws. Metric series
• BS-A-300 - Specification for procurement of alloy steel bolts with strength classification 1 100 MPa and MJ threads
• BS-A-312 - Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
• BS-A-313 - Areospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
• BS-A-31-54 - Specification for British Association (B.A.) low tensile screws and nuts for aeronautical purposes
• BS-A-363 - Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification
• BS-A-401-420 - Specification for screws, pan and 100 countersunk head, hexalobular drive recess (unified threads below inch) in various materials
• BS-A-55-&-56 - Specifications for grub screws for aeronautical purposes
• BS-EN-2549 - Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium, anodized, MoS₂ lubricated. Classification: 1100 MPa (at ambient temperature) / 315C
• BS-EN-2576 - Aerospace series. Bolts, MJ threads, in heat resisting steel FE-PA2601 (A286). Classification: 900 MPa (at ambient temperature)/650 C. Technical specification
• BS-EN-2583 - Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1 275 MPa (at ambient temperature)/650C. Technical specification
• BS-EN-2606 - Aerospace series. 60 interface for adaptors, threaded, with lockring. Geometric configuration
• BS-EN-2859 - Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235C
• BS-EN-2883 - Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315C
• BS-EN-2886-TC - Tracked Changes. Aerospace series. Screw, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235 C
• BS-EN-2888 - Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) / 425C
• BS-EN-2889 - Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature) / 235C
• BS-EN-2939-TC - Tracked Changes. Aerospace series. Screw, 100 countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650 C
• BS-EN-3008 - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:1275 MPa (at ambient temperature)/650C
• BS-EN-3009 - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification. 1275 MPa (at ambient temperature)/650C
• BS-EN-3010 - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C
• BS-EN-3052 - Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 425 C
• BS-EN-3293 - Aerospace series. Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated. Classification: 1275 MPa/650C
• BS-EN-3294 - Aerospace series. Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts. Classification: 1210 MPa/730C
• BS-EN-3301 - Aerospace series. Bolts, T-head, close tolerance medium thread length in heat resisting steel FE-PM1708 (FV535), uncoated. Classification: 1000 MPa/550C
• BS-EN-3302 - Aerospace series. Bolts in heat resisting steel FE-PM1708 (FV535). Classification: 1 000 MPa/550 C. Technical specification
• BS-EN-3302-TC - Tracked Changes. Aerospace series. Bolts in heat resisting steel FE-PM1708 (FV535). Classification: 1 000 MPa/550 °C. Technical specification
• BS-EN-3323 - Aerospace series. Bolts with double hexagon head, relieved shank, long thread, in heat resisting steel FE-PM 38 (FV 535). Classification: 1000 MPa/550 C
• BS-EN-3324 - Aerospace series. Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PM1708 (FV535). Classification: 1000 MPa/550C. Unplated
• BS-EN-3325 - Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel, FE-PM1708 (FV535). Classification: 1000 MPa/550C. Unplated
• BS-EN-3326 - Aerospace series. Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-PH2601 (INCO 718). Classification: 1275 MPa/650C, unplated
• BS-EN-3327 - Aerospace series. Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated. Classification: 1275 MPa/650 C
• BS-EN-3328 - Aerospace series. Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting steel FE-PM38 (FV535), uncoated. Classification: 1000 MPa/550 C
• BS-EN-3388 - Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification 1275 MPa/650C. Manufacturing method optional. Technical specification
• BS-EN-3389 - Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy). Classification: 1210 MPa/730C. Manufacturing method optional. Technical specification
• BS-EN-3444 - Aerospace series. Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification: 1250 MPa (at ambient temperature) / 650C
• BS-EN-3613 - Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NIPH2601 (Inconel 718), silver plated. Classification: 1275 MPa/650 C
• BS-EN-3614 - Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 900 MPa/650C
• BS-EN-3636 - Aerospace series. Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 900 MPa/650C
• BS-EN-3685 - Aerospace series. Bolts in heat resisting steel FE-PA2601 (A286). Classification: 1 100 MPa/650 C. Technical specification
• BS-EN-3686 - Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1100 MPa/650C
• BS-EN-3706 - Aerospace series. Headless threaded plugs, cross recess, in aluminium alloy 5086
• BS-EN-3707 - Aerospace series. Headless threaded plugs. Installation holes
• BS-EN-3724 - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS₂ coated. Strength class: 1100 MPa (at ambient temperature)
• BS-EN-3725 - Aerospace series. Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS₂ coated. Strength class: 1100 MPa (at ambient temperature)
• BS-EN-3818 - Aerospace series. Bolts, MJ threads, in titanium alloy TI- P64001. Strength class: 1 100 MPa (at ambient temperature). Technical specification
• BS-EN-3820 - Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/315 C
• BS-EN-3820-TC - Tracked Changes. Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/315 °C
• BS-EN-3832 - Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1550 MPa (at ambient temperature) / 650C
• BS-EN-3833 - Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated. Classification: 1 550 MPa (at ambient temperature)/650 C. Technical specification
• BS-EN-3905 - Aerospace series. Six lobe recesses for bolts. Technical specification
• BS-EN-3907 - Aerospace series. Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS₂ coated. Classification: 1100MPa (at ambient temperature)/350C
• BS-EN-3912 - Aerospace series. Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated. Classification: 1100 MPa (at ambient temperature) / 650C
• BS-EN-4009 - Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1550 MPa (at ambient temperature)
• BS-EN-4071 - Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 C
• BS-EN-4072 - Aerospace series. Screws, 100 countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated. Classification: 1 100 MPa (at ambient temperature) / 425 C
• BS-EN-4073 - Aerospace series. Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 C
• BS-EN-4074 - Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/425C
• BS-EN-4075 - Aerospace series. Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated. Classification: 490 MPa (at ambient temperature) / 425 C
• BS-EN-4127 - Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/ 425 C
• BS-EN-4128 - Aerospace series. Bolts, normal hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1 250 MPa (at ambient temperature) / 425 C
• BS-EN-4129 - Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235C
• BS-EN-4130 - Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 C
• BS-EN-4131 - Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature) / 425 C
• BS-EN-4132 - Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235C
• BS-EN-4133 - Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 C
• BS-EN-4134 - Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature)/425C
• BS-EN-4135 - Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315C
• BS-EN-4136 - Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa at ambient temperature)/235C
• BS-EN-4137 - Aerospace series. Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315C
• BS-EN-4138 - Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 C
• BS-EN-4161 - Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 PMa (at ambient temperature)/235 C
• BS-EN-4162 - Aerospace series. Screws 100 countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 C
• BS-EN-4163 - Aerospace series. Screws 100 countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 C
• BS-EN-4163-TC - Tracked Changes. Aerospace series. Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C
• BS-EN-4172 - Aerospace series. Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification: 1 100 MPa (at ambient temperature) / 315C
• BS-EN-4176 - Aerospace series. Lockbolts, 100 countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating. Collars in titanium TI-P99002 or aluminium alloy 2024. Metric series. Technical specification
• BS-EN-4311 - Aerospace series. Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS₂ lubricated. Classification: 1100 MPa (at ambient temperature) / 315C
• BS-EN-4312 - Aerospace series. Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315C
• BS-EN-4321 - Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification. 1 550 Mpa (at ambient temperature)/650C
• BS-EN-4322 - Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS₂ coated. Strength class: 1100 MPa (at ambient temperature)
• BS-EN-4323 - Aerospace series. Screws, 100 countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS₂ coated. Classification. 900 MPa (at ambient temperature) / 350C
• BS-EN-4352 - Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS₂ coated. Classification. 1 550 MPa (at ambient temperature) / 425C
• BS-EN-4402 - Aerospace series. Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001,with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315C
• BS-EN-4421 - Aerospace series. Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel. Strength class: 1100 MPa(at ambient temperature)
• BS-EN-4458 - Aerospace series. Studs, MJ threads, in titanium alloy TI-P64001, MoS₂ coated, with serrated locking ring in corrosion resisting steel.Strengt h class: 1100 MPa (at ambient temperature). Technicalspecification
• BS-EN-4459 - Aerospace series. Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel. Design standard
• BS-EN-4460 - Aerospace series. Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel. Installation and removal procedure
• BS-EN-4495 - Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315C
• BS-EN-4496 - Aerospace series. Screws, 100 countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315 C
• BS-EN-4497 - Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1 100 MPa (at ambient temperature) / 315 C
• BS-EN-4498 - Aerospace series. Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating. Classification: 1 550 MPa (at ambient temperature) / 315 C
• BS-EN-4499 - Aerospace series. Screws, 100 countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315 C
• BS-EN-4501 - Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315C
• BS-EN-4509 - Screws, 100 countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature)/315C
• BS-EN-4609 - Aerospace series. Spiral drive recesses for threaded fasteners. Geometrical definition and technical requirements
• BS-EN-4634 - Aerospace series. Screws, 100 countersunk head, six lobe recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated. Classification: 900 MPa (at ambient temperature)/650C
• BS-EN-4635 - Aerospace series. Screws, 100 countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1270 MPa (at ambient temperature) / 650 C
• BS-EN-4636 - Aerospace series. Screws, 100 countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315C
• BS-EN-4844 - Aerospace series. Screws, 100 countersunk normal head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification : 1 100 MPa (at ambient temperature) / 425 C
• BS-EN-4845 - Aerospace series. Screw, 100 countersunk normal head, Spiral Drive Recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated. Classification: 900 MPa (at ambient temperature)/650 C
• BS-EN-4846 - Aerospace series. Screws, pan head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification : 1 100 MPa (at ambient temperature) / 425 C
• BS-EN-4847 - Aerospace series. Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature)/235 C
• BS-EN-4848 - Aerospace series. Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/315 C
• BS-EN-4849 - Aerospace series. Screw, 100 countersunk normal head, Spiral Drive Recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1 100 MPa (at ambient temperature)/425 C
• BS-EN-4850 - Aerospace series. Screw, 100 countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature)/235 C
• BS-EN-4851 - Aerospace series. Screw, 100 countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature)/235 C
• BS-EN-4852 - Aerospace series. External spiral drive heads for threaded fasteners. Geometrical definition and fastener head wrenching configuration
• BS-EN-4853 - Aerospace series. Externally threaded fastener, 100 countersunk normal head, Spiral Drive Recess. Classification: 1 100 MPa (at ambient temperature)/425 C
• BS-EN-6095 - Aerospace series. Rotary fasteners. Structural and non-structural applications. Technical specification
• BS-EN-6105 - Aerospace series. Stud with shoulder
• BS-EN-6129 - Aerospace series. Blind bolt, protruding head, high strength, pulltype
• BS-ISO-12256 - Aerospace. Drives, internal, cruciform, ribbed. Metric series
• BS-ISO-12257 - Aerospace. Internal six-lobe drives. Metric series
• BS-ISO-12260 - Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
• BS-ISO-12261 - Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
• BS-ISO-12261-TC - Tracked Changes. Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
• BS-ISO-13921 - Aerospace. Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
• BS-ISO-14275 - Aerospace. Drives, internal, offset cruciform, ribbed. Metric series
• BS-ISO-14276 - Aerospace. Drives, internal, offset cruciform. Metric series
• BS-ISO-14277 - Aerospace. Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives. Metric series
• BS-ISO-14278 - Aerospace. Gauges, for internal offset cruciform ribbed or unribbed drives. Metric series
• BS-ISO-14279 - Aerospace. Drives, internal, cruciform. Metric series
• BS-ISO-14280 - Aerospace. Drivers, ribbed, for internal cruciform ribbed or unribbed drives. Metric series
• BS-ISO-14281 - Aerospace. Gauges, for internal cruciform ribbed or unribbed drives. Metric series
• BS-ISO-16130 - Aerospace series. Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test)
• BS-ISO-3185 - Aerospace. Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
• BS-ISO-3185-TC - Tracked Changes. Aerospace. Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
• BS-ISO-3186 - Aerospace. Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa. Dimensions
• BS-ISO-3193 - Aerospace. Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
• BS-ISO-5857 - Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1250 MPa. Procurement specification
• BS-ISO-7689 - Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification
• BS-ISO-7961 - Aerospace. Bolts. Test methods
• BS-ISO-8168 - Aerospace. Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa. Procurement specification
• BS-ISO-9154 - Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification
• BS-ISO-9255 - Aerospace. Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
• BS-ISO-9749 - Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
• BS-SP-114 - Specification for Eye bolts (unified threads) for aircraft
• BS-SP-164 - Specification for design and performance requirements for turnlock, stud-type panel fasteners (metric series)

ISO:

• ISO-12256 - Aerospace - Drives, internal, cruciform, ribbed - Metric series
• ISO-12257 - Aerospace - Internal six-lobe drives - Metric series
• ISO-12260 - Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions
• ISO-12261 - Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions
• ISO-13921 - Aerospace - Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions
• ISO-14275 - Aerospace - Drives, internal, offset cruciform, ribbed - Metric series
• ISO-14276 - Aerospace - Drives, internal, offset cruciform - Metric series
• ISO-14277 - Aerospace - Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives - Metric series
• ISO-14278 - Aerospace - Gauges, for internal offset cruciform ribbed or unribbed drives - Metric series
• ISO-14279 - Aerospace - Drives, internal, cruciform - Metric series
• ISO-14280 - Aerospace - Drivers, ribbed, for internal cruciform ribbed or unribbed drives - Metric series
• ISO-14281 - Aerospace - Gauges, for internal cruciform ribbed or unribbed drives - Metric series
• ISO-16130 - Aerospace series - Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test)
• ISO-3185 - Aerospace - Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions
• ISO-3186 - Aerospace - Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1 250 MPa to 1 800 MPa - Dimensions
• ISO-3193 - Aerospace - Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions
• ISO-3202 - Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions
• ISO-3203 - Aerospace - Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions
• ISO-4095 - Aerospace - Bihexagonal drives - Wrenching configuration - Metric series
• ISO-5843-3 - Aerospace - List of equivalent terms - Part 3: Aerospace bolts and nuts
• ISO-5856 - Aerospace - Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions
• ISO-5857 - Aerospace - Bolts, with MJ threads, made of alloy steel, strength class 1 250 MPa - Procurement specification
• ISO-7403 - Aerospace - Spline drives - Wrenching configuration - Metric series
• ISO-7689 - Aerospace - Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa - Procurement specification
• ISO-7913 - Aerospace - Bolts and screws, metric - Tolerances of form and position
• ISO-7961 - Aerospace - Bolts - Test methods
• ISO-8168 - Aerospace - Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa - Procurement specification
• ISO-9152 - Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa - Procurement specification
• ISO-9154 - Aerospace - Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa - Procurement specification
• ISO-9219 - Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated - Dimensions and masses
• ISO-9254 - Aerospace - Bolt, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions
• ISO-9255 - Aerospace - Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions
• ISO-9256 - Aerospace - Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions

Other SDOs:

• DIN-ISO-9152 - Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa - Procurement specification (ISO 9152:1998)
• EN-2606 - Aerospace Series - 60 Degrees Interface for Adaption, Threaded, With Lockring - Geomet
• EN-2883 - Aerospace Series - Nuts, Hexagonal, Self-Locking, With Counterbore & Captive Washer, I
• EN-3008 - Bolts, Hexagon Head, Relieved Shank, Long Thread, in Heat Resisting Nickel Base Alloy
• EN-3009 - Bolts, Hexagon Head, Relieved Shank, Long Thread, in Heat Resisting Nickel Base Alloy
• EN-3010 - Bolts, Hexagon Head, Relieved Shank, Long Thread, in Heat Resisting Nickel Base Alloy
• EN-3052 - Aerospace Series - Bolts, Normal Hexagonal Head, Close Tolerance Normal Shank, Short T
• EN-3293 - Aerospace Series, Bolts, T-Head, Close Tolerance, Medium Thread Length, in Heat Resist
• EN-3294 - Aerospace Series, Bolts, T-Head, Close Tolerance, in Heat Resisting Nickel Base Alloy
• EN-3301 - Aerospace Series - Bolts, T-Head, Close Tolerance, Medium Thread Length, in Heat Resis
• EN-3302 - Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 DegC - Technical specification
• EN-3323 - Aerospace Series - Bolts With Double Hexagon Head, Relieved Shank Long Thread - in He
• EN-3324 - Aerospace Series, Bolts, Hexagon Head, Relieved Shank, Long Thread, in Heat Resisting
• EN-3325 - Aerospace Series, Bolts, T-Head, Relieved Shank, Long Thread, in Heat Resisting Steel,
• EN-3326 - Aerospace Series - Bolts, D-Head, Close Tolerance, Medium Thread Length, in Heat Resis
• EN-3327 - Aerospace Series, Bolts, Double Hexagon Head, Close Tolerance, Medium Thread Length, I
• EN-3328 - Aerospace Series - Bolts, Double Hexagon Head, Close Tolerance, Medium Thread Length,
• EN-3388 - Aerospace Series, Fasteners, Externally Threaded, in Heat Resisting Nickel Base Alloy
• EN-3389 - Aerospace Series, Fasteners, Externally Threaded, in Heat Resting Nickel Base Alloy NI
• EN-3444 - Aerospace Series - Bolts, Large Bihexagonal Head, Close Tolerance Normal Shank, Medium
• EN-3613 - Aerospace Series - Bolts, Normal Hexagonal Head, Relieved Shank, Long Thread, in Heat
• EN-3614 - Aerospace Series - Bolts, Normal Hexagonal Head, Relieved Shank, Long Thread, in Heat
• EN-3636 - Aerospace Series, Screws, Reduced Pan Head, Offset Cruciform Recess, Relieved Shank, L
• EN-3685 - Aerospace Series - Bolts in Heat Resisting Steel FE-Pa2601 (a286) - Classification: 11
• EN-3686 - Aerospace Series - Bolts, Double Hexagon Head, Relieved Shank, Long Thread, in Heat Re
• EN-3687 - Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 Degrees C
• EN-3706 - Aerospace series - Headless threaded plugs, cross recess, in aluminium alloy 5086
• EN-3707 - Aerospace series - Headless threaded plugs - Installation holes
• EN-3818 - Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1100 MPa (at ambient temperature) - Technical specification
• EN-3820 - Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 DegC
• EN-3833 - Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1550 MPa (at ambient temperature) / 650 °C - Technical specification
• EN-3905 - Aerospace Series, Six Lobe Recesses for Bolts, Technical Specification
• EN-3912 - Aerospace Series - Bolts, Pan Head, Six Lobe Recess, Relieved Shank, Long Thread, in H
• EN-4071 - Aerospace Series - Bolts, Normal Hexagonal Head, Close Tolerance Normal Shank, Short T
• EN-4072 - Aerospace series - Screws, 100 Degrees countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 Degrees C
• EN-4073 - Aerospace series - Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 Degrees C
• EN-4074 - Aerospace Series - Screws, Pan Head, Six Lobe Recess, Coarse Tolerance Normal Shank, M
• EN-4075 - Aerospace Series, Screws, Pan Head, Offset Cruciform Recess, Threaded To Head, in Corr
• EN-4127 - Aerospace Series - Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Short
• EN-4128 - Aerospace series - Bolts, normal hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425 Degrees C
• EN-4129 - Aerospace Series - Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Medium
• EN-4130 - Aerospace Series - Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Medium
• EN-4131 - Aerospace Series - Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Medium
• EN-4132 - Aerospace Series - Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Long T
• EN-4133 - Aerospace Series - Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Long T
• EN-4134 - Aerospace Series - Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Long T
• EN-4135 - Aerospace Series - Bolts, Normal BI-Hexagonal Head, Coarse Tolerance Normal Shank, Med
• EN-4136 - Aerospace Series - Bolts, Normal BI-Hexagonal Head, Coarse Tolerance Normal Shank, Lon
• EN-4137 - Aerospace Series - Bolts, Normal BI-Hexagonal Head, Stepped Shank, Long Thread, in Ti
• EN-4138 - Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 Degrees C
• EN-4161 - Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal
• EN-4162 - Aerospace series - Screws 100 Degrees countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 Degrees C
• EN-4163 - Aerospace series - Screws 100 Degrees countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 Degrees C
• EN-4172 - Aerospace Series, Lockbolts, Protruding Head, Sheartype, Close Tolerance, in Titanium
• EN-4322 - Aerospace Series, Bolts, Double Hexagon Head With Lockwire Holes, Relieved Shank, Long
• EN-4402 - Aerospace Series, Lockbolts, 100 Degrees Countersunk Normal Head, Shear Type, Close T
• EN-4421 - Aerospace Series - Studs, in Titanium Alloy Ti-P64001, Mos2 Coated, With Serrated Loc
• EN-4496 - Aerospace Series, Screws, 100 Degrees Countersunk Normal Head, Offset Cruciform Recess
• EN-4499 - Aerospace Series - Screws, 100 Degree Countersunk Reduced Head, Offset Cruciform Reces
• EN-4634 - Aerospace Series - Screws, 100 Degrees Countersunk Head, Six Lobe Recess, Short Thread
• EN-4635 - Aerospace Series - Screws, 100 Degrees Countersunk Head, Six Lobes Recess, Short Threa
• EN-4636 - Aerospace Series - Screws, 100 Degrees Countersunk Head, Six Lobe Recess, Short Thread
• EN-4852 - Aerospace series - External spiral drive heads for threaded fasteners - Geometrical definition and fastener head wrenching configuration
• EN-4859 - Aerospace series - Sensor based clamp load determination / high tensile bolts - Technical specification
• EN-6105 - Aerospace series - Stud with shoulder
• EN-6129 - Aerospace series - Blind bolt, protruding head, high strength, pulltype
• SS-EN-1069-1 - Water slides - Part 1: Safety requirements and test methods
• SS-EN-1251-2 - Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing
• SS-EN-14638-3 - Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods
• SS-EN-15734-1 - Railway applications - Braking systems of high speed trains - Part 1: Requirements and definitions
• SS-EN-2549 - Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 oC
• SS-EN-2576 - Aerospace series - Bolts, MJ threads, in heat resisting steel FE-PA2601 (A286) - Classification: 900 MPa (at ambient temperature)/650 °C - Technical specification
• SS-EN-2583 - Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa (at ambient temperature)/650°C - Technical specification
• SS-EN-2606 - Aerospace series - 60 degrees interface for adaptors, threaded, with lockring - Geometric configuration
• SS-EN-2652 - Aerospace series - Screws, 100 degrees countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) /235 degrees Celsius
• SS-EN-2859 - Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 degrees C
• SS-EN-2883 - Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 degrees Celsius
• SS-EN-2888 - Aerospace series - Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) /425 degrees C
• SS-EN-2889 - Aerospace series - Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 degrees C
• SS-EN-3008 - Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1 275 MPa (at ambient temperature)/650 degrees Celsius
• SS-EN-3009 - Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) silver plated - Classification: 1 275 MPa (at ambient temperature)/650degrees Celsius
• SS-EN-3010 - Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1 210MPa (at ambient temperature)/730 degrees Celsius
• SS-EN-3011 - Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1 210 MPa (at ambient temperature)/730 degrees Celsius
• SS-EN-3052 - Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-3270 - Aerospace series - Pipe coupling 8°30' in titanium alloy - Blanking plugs with lockring
• SS-EN-3293 - Aerospace series - Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification: 1 275 MPa/650 degrees Celsius
• SS-EN-3294 - Aerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts - Classification: 1 210 MPa/730 degrees Celsius
• SS-EN-3301 - Aerospace series - Bolts, T-head, close tolerance medium thread length in heat resisting steel FE-PM1708 (FV535), uncoated - Classification: 1 000 MPa/550 degrees Celsius
• SS-EN-3302 - Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Technical specification
• SS-EN-3323 - Aerospace series - Bolts with double hexagon head, relieved shank, long thread - In heat resisting steel FE-PM38 (FV535) Classification: 1 000 MPa/550 degrees Celsius
• SS-EN-3324 - Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 degrees Celsius - Unplated
• SS-EN-3325 - Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel, FE-PM1708 (FV535) - Classification: 1 000 MPa/550 degrees Celsius - Unplated
• SS-EN-3326 - Aerospace series - Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy Nl-PH2601 (INCO718) - Classification: 1 275 MPa/650 degrees Celsius, unplated
• SS-EN-3327 - Aerospace series - Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy Nl-P100HT (Inconel 718), uncoated - Classification: 1 275 MPa/650 degrees Celsius
• SS-EN-3328 - Aerospace series - Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting steel FE-PM38 (FV535), uncoated - Classification: 1 000 MPa/550 degrees Celsius
• SS-EN-3388 - Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification 1 275 MPa/650 degrees Celsius - Manufacturing method optional - Technical specification
• SS-EN-3543 - Aerospace series - Screws, 100 degrees countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature) /425 degrees C
• SS-EN-3613 - Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NIPH2601 (Inconel 718), silver plated - Classification: 1 275 MPa/650 degrees Celsius
• SS-EN-3614 - Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 900 MPa / 650 degrees Celsius
• SS-EN-3636 - Aerospace series - Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa/650 degrees Celsius
• SS-EN-3685 - Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa/650 °C - Technical specification
• SS-EN-3686 - Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 degrees Celsius
• SS-EN-3687 - Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 degrees Celsius
• SS-EN-3706 - Aerospace series - Headless threaded plugs, cross recess, in aluminium alloy 5086
• SS-EN-3707 - Aerospace series - Headless threaded plugs - Installation holes
• SS-EN-3724 - Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Strength Class: 1 100 MPa (at ambient temperature)
• SS-EN-3725 - Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated - Strength class: 1 100 MPa (at ambient temperature)
• SS-EN-3740 - Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/315 °C
• SS-EN-3777 - Aerospace series - Pins, quick release, single and double acting - Technical specification
• SS-EN-3818 - Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1 100 MPa (at ambient temperature) - Technical specification
• SS-EN-3820 - Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C
• SS-EN-3832 - Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy Nl-PH2601 (Inconel 718) - Classification: 1 550 MPa (at ambient temperature) / 650 degrees C
• SS-EN-3833 - Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 °C - Technical specification
• SS-EN-3905 - Aerospace series - Six lobe recesses for bolts - Technical specification
• SS-EN-3907 - Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Classification: 1 100 MPa (at ambient temperature) /350 degrees C
• SS-EN-3912 - Aerospace series - Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated - Classification: 1 100 MPa (at ambient temperature) / 650 degrees Celsius
• SS-EN-4009 - Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 550 MPa (at ambient temperature)/650 degrees C
• SS-EN-4071 - Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-4072 - Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C
• SS-EN-4073 - Aerospace series - Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
• SS-EN-4074 - Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-4075 - Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated - Classification: 490 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-4127 - Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-4128 - Aerospace series - Bolts, normal hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425 °C
• SS-EN-4129 - Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 degrees Celsius
• SS-EN-4130 - Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-4131 - Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-4132 - Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 degrees Celsius
• SS-EN-4133 - Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-4134 - Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425 degrees Celsius
• SS-EN-4135 - Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 degrees Celsius
• SS-EN-4137 - Aerospace series - Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 degrees Celsius
• SS-EN-4138 - Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
• SS-EN-4161 - Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 PMa (at ambient temperature)/235 °C
• SS-EN-4162 - Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
• SS-EN-4163 - Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
• SS-EN-4176 - Aerospace series - Lockbolts, 100 countersunk normal head or protruding head, tension- / sheartype, close tolerance, in titantium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification
• SS-EN-4311 - Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 oC
• SS-EN-4312 - Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 oC
• SS-EN-4321 - Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/650 degrees C
• SS-EN-4322 - Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated - Strength class: 1 100 MPa (at ambient temperature)
• SS-EN-4323 - Aerospace series - Screws, 100° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001 anodized, MoS2 coated - Classification: 900 MPa (at ambient temperature)/350°C
• SS-EN-4352 - Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1 550 MPa (at ambient temperature) / 425 degrees C
• SS-EN-4402 - Aerospace series - Lockbolts, 100o countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 oC
• SS-EN-4421 - Aerospace series - Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature)
• SS-EN-4495 - Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 oC
• SS-EN-4496 - Aerospace series - Screws, 100 degrees countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 degrees C
• SS-EN-4497 - Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 degrees C
• SS-EN-4498 - Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1 550 MPa (at ambient temperature) / 315 degrees C
• SS-EN-4499 - Aerospace series - Screws, 100 degrees countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 degrees Celsius
• SS-EN-4501 - Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 oC
• SS-EN-4509 - Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 oC
• SS-EN-4609 - Aerospace series - Spiral drive recesses for threaded fasteners - Geometrical definition and technical requirements
• SS-EN-4634 - Aerospace series - Screws, 100 degrees countersunk head, six lobe recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated - Classification: 900 MPa (at ambient temperature) / 650 degrees Celsius
• SS-EN-4635 - Aerospace series - Screws, 100 degrees countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NIPH2601 (Inconel 718) - Classification: 1 270 MPa (at ambient temperature) / 650 degrees Celsius
• SS-EN-4852 - Aerospace series - External spiral drive heads for threaded fasteners - Geometrical definition and fastener head wrenching configuration
• SS-EN-4859 - Aerospace series - Sensor based clamp load determination / high tensile bolts - Technical specification
• SS-EN-6105 - Aerospace series - Stud with shoulder
• SS-EN-6129 - Aerospace series - Blind bolt, protruding head, high strength, pulltype
• SS-EN-7010 - Aerospace series - Configuration - Definition and designation for product standards for externally threaded fasteners
• SS-EN-ISO-10595 - Resilient floor coverings - Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles - Specification (ISO 10595:2010)
• SS-EN-ISO-12863 - Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2022)
• SS-ISO-14275 - Aerospace - Drives, internal, offset cruciform, ribbed - Metric series
• SS-ISO-14276 - Aerospace - Drives, internal, offset cruciform - Metric series
• SS-ISO-14277 - Aerospace - Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives - Metric series
• SS-ISO-14278 - Aerospace - Gauges, for internal offset cruciform ribbed or unribbed drives - Metric series
• SS-ISO-14279 - Aerospace - Drives, internal, cruciform - Metric series
• SS-ISO-14280 - Aerospace - Drivers, ribbed, for internal cruciform ribbed or unribbed drives - Metric series
• SS-ISO-14281 - Aerospace - Gauges, for internal cruciform ribbed or unribbed drives - Metric series
• SS-ISO-4662 - Rubber, vulcanized or thermoplastic - Determination of rebound resilience (ISO 4662:2009, IDT)
• SS-ISO-7403 - Aerospace - Spline drives - Wrenching configuration - Metric series
• SS-ISO-9154 - Aerospace - Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1550 MPa - Procurement specification
• SS-ISO-9219 - Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in titanium alloy steel and MoS2 lubricated or in corrosion-resistant steel and passivated - Dimensions and masses