Document Center List of Standards on Steel Pipes And Tubes For Specific Use Including Hollow Steel Bars And Sections For Construction Steel Pipes For Conducting Fluids, See 23.040.10
ICS Code 77.140.75
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1005 - Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded (Withdrawn 2014)
- ASTM-A1006 - Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded (Withdrawn 2014)
- ASTM-A1085 - Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
- ASTM-A1097 - Standard Specification for Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 in. and Larger)
- ASTM-A430 - Specification for Austentic Steel Forged and Bored Pipe for Hi GH-Temperature Service (Withdrawn 1995)
- ASTM-A452 - Specification for Centrifugally Cast Austenitic Steel Cold-Wrought Pipe for High-Temperature Service (Withdrawn 1995)
- ASTM-A595 - Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
- ASTM-A660 - Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
- ASTM-A872 - Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
- ASTM-B690 - Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Seamless Pipe and Tube
- ASTM-E309 - Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
BSI:
- BS-1717 - Specification for steel tubes for cycle and motor cycle purposes
- BS-3059-1 - Steel Boiler & Superheater Tubes, Specification for Low Tensile Carbon Steel Tubes Wit
- BS-3600 - Dimensions & Masses per Unit Length of Welded & Seamless Steel Pipes & Tubes for Pressure
- BS-3601 - Specification for Carbon Steel Pipes and Tubes With Specifiedroom Temperature Propertie
- BS-3602-2 - Specification for Steel Pipes & Tubes for Pressure Purposes: Carbon & Carbon Manganese
- BS-3603 - Specification for Carbon & Alloy Steel Pipes & Tubes With Specified Low Temperature Pr
- BS-3605 - Specification for seamless and welded austenitic stainless steel pipes and tubes for pressure purposes
- BS-3605-1 - Austenitic Stainless Steel Pipes & Tubes for Pressure Purposes, Specification for Seam
- BS-3605-2 - Austenitic Stainless Steel Pipes & Tubes for Pressure Purposes, Specification for Long
- BS-4825-1 - Stainless Steel Tubes and Fittings for the Food Industry and Other Hygienic Applications. Specification for Tubes
- BS-4825-2 - Stainless steel tubes and fittings for the food industry and other hygienic applications
- BS-4825-3 - Stainless steel tubes and fittings for the food industry and other hygienic applications
- BS-4825-4 - Stainless steel tubes and fittings for the food industry and other hygienic applications
- BS-4825-5 - Stainless steel tubes and fittings for the food industry and other hygienic applications
- BS-5383 - Specification for material identification of steel, nickel alloy and titanium alloy tubes by continuous character marking and colour coding of steel tubes
- BS-6258 - Specification for hollow steel bars for machining
- BS-6323-1 - Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes. General requirements
- BS-6323-4 - Part 4: Specific Requirements for Cold Finished Seamless Steel Tubes, Seamless & Welded St
- BS-6323-5 - Specific Requirements for Electric Resistance Welded (Including Induction Welded) Stee
- BS-6323-6 - Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes. Specific requirements for cold finished electric resistance welded (including induction welded) steel tubes
- BS-6999 - Specification for vitreous-enamelled low-carbon-steel flue pipes, other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW
- BS-7668 - Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification
- BS-7668-TC - Tracked Changes. Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification
- BS-879 - Specification for water well casing
- BS-879-1 - Water well casing. Specification for steel tubes for casing
- BS-EN-10210-1 - Hot finished structural hollow sections of non-alloy and fine grain steels
- BS-EN-10210-2 - Hot finished steel structural hollow sections
- BS-EN-10210-2-TC - Tracked Changes. Hot finished steel structural hollow sections
- BS-EN-10210-3 - Hot finished steel structural hollow sections
- BS-EN-10216-1 - Seamless steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10216-2 - Seamless steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10216-3 - Seamless steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10216-4 - Seamless steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10216-5 - Seamless steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10216-5-TC - Tracked Changes. Seamless steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-1 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-1-TC - Tracked Changes. Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-2 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-3 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-4 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-5 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-6 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-7 - Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10217-7-TC - Tracked Changes. Welded steel tubes for pressure purposes. Technical delivery conditions
- BS-EN-10219-1 - Cold formed welded structural hollow sections of non-alloy and fine grain steels
- BS-EN-10219-2 - Cold formed welded steel structural hollow sections
- BS-EN-10219-2-TC - Tracked Changes. Cold formed welded steel structural hollow sections
- BS-EN-10219-3 - Cold formed welded steel structural hollow sections
- BS-EN-10220 - Seamless and welded steel tubes. Dimensions and masses per unit length
- BS-EN-10290 - Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings
- BS-EN-10294-1 - Hollow bars for machining. Technical delivery conditions
- BS-EN-10294-2 - Hollow bars for machining. Technical delivery conditions
- BS-EN-10296-2 - Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions
- BS-EN-10297-1 - Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions
- BS-EN-10297-2 - Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions
- BS-EN-10305-1 - Steel tubes for precision applications. Technical delivery conditions
- BS-EN-10305-2 - Steel tubes for precision applications. Technical delivery conditions
- BS-EN-10305-2-TC - Tracked Changes. Steel tubes for precision applications. Technical delivery conditions
- BS-EN-10305-3 - Steel tubes for precision applications. Technical delivery conditions
- BS-EN-10305-3-TC - Tracked Changes. Steel tubes for precision applications. Technical delivery conditions
- BS-EN-10305-4 - Steel tubes for precision applications. Technical delivery conditions
- BS-EN-10305-5 - Steel tubes for precision applications. Technical delivery
- BS-EN-10305-5-TC - Tracked Changes. Steel tubes for precision applications. Technical delivery
- BS-EN-10305-6 - Steel tubes for precision applications. Technical delivery conditions
- BS-EN-10305-6-TC - Tracked Changes. Steel tubes for precision applications. Technical delivery conditions
- BS-EN-10312 - Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions
- BS-EN-1123-1 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems
- BS-EN-1123-2 - Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems
- BS-EN-12007-3 - Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar
- BS-EN-12007-3-TC - Tracked Changes. Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar
- BS-EN-17800 - Life cycle cost (LCC) and life cycle assessment (LCA) for CO2 emissions in ductile iron pipe systems
- BS-EN-ISO-10893-1 - Non-destructive testing of steel tubes
- BS-EN-ISO-10893-2 - Non-destructive testing of steel tubes
- BS-EN-ISO-11960 - Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
- BS-EN-ISO-11961 - Petroleum and natural gas industries. Steel drill pipe
- BS-EN-ISO-13680 - Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material. Technical delivery conditions
- BS-EN-ISO-16440 - Petroleum and natural gas industries. Pipeline transportation systems. Design, construction and maintenance of steel cased pipelines
- BS-EN-ISO-3183 - Petroleum and natural gas industries. Steel pipe for pipeline transportation systems
- BS-ISO-13470 - Trenchless applications of ductile iron pipes systems. Product design and installation
- BS-ISO-13680 - Petroleum & Natural Gas Industries, Corrosion, Resistant Alloy Seamless Tubes for Use
- BS-ISO-16132 - Ductile iron pipes and fittings. Seal coats for cement mortar linings
- BS-ISO-16132-TC - Tracked Changes. Ductile iron pipes and fittings. Seal coats for cement mortar linings
- BS-ISO-21053 - Life cycle analysis and recycling of ductile iron pipes for water applications
- BS-ISO-23991 - Irrigation applications of ductile iron pipelines. Product design and installation
- BS-ISO-2531 - Ductile iron pipes, fittings, accessories and their joints for water applications
- BS-ISO-4179 - Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
- BS-ISO-4179-TC - Tracked Changes. Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
- BS-ISO-8179-2 - Ductile iron pipes, fittings, accessories and their joints - External zinc-based coating
- BS-ISO-8535-1 - Diesel engines. Steel tubes for high-pressure fuel injection pipes
- BS-ISO-9349 - Ductile iron pipes, fittings, accessories and their joints. Thermal preinsulated products
- BS-ISO-9349-TC - Tracked Changes. Ductile iron pipes, fittings, accessories and their joints. Thermal preinsulated products
- KIT-159 - Steel Tubes Technical Delivery Conditions Kit
ISO:
- ISO-10124 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections
- ISO-10332 - Non-destructive testing of steel tubes - Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness
- ISO-10543 - Seamless and hot-stretch-reduced welded steel tubes for pressure purposes - Full peripheral ultrasonic thickness testing
- ISO-10763 - Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures
- ISO-10799 - Structural steels -- Cold-formed, welded, structural hollow sections -- Technical delivery requirements
- ISO-10799-1 - Cold-formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
- ISO-10799-2 - Cold-formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Dimensions and sectional properties
- ISO-10893-1 - Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
- ISO-10893-10 - Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
- ISO-10893-10-AM1 - - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria
- ISO-10893-11 - Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
- ISO-10893-11-AM1 - - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria
- ISO-10893-12 - Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
- ISO-10893-12-AM1 - - Amendment 1: Change of acceptance criteria
- ISO-10893-1-AM1 - - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria
- ISO-10893-2 - Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
- ISO-10893-2-AM1 - - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria
- ISO-10893-3 - Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
- ISO-10893-3-AM1 - - Amendment 1: Change of dimensions of the reference notch
- ISO-10893-3-AM2 - - Amendment 2: Change acceptance criteria
- ISO-10893-4 - Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
- ISO-10893-5 - Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
- ISO-10893-6 - Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
- ISO-10893-7 - Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
- ISO-10893-8 - Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
- ISO-10893-8-AM1 - - Amendment 1: Change acceptance criteria
- ISO-10893-9 - Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
- ISO-10893-9-AM1 - - Amendment 1: Change acceptance criteria
- ISO-1129 - Steel tubes for boilers, superheaters and heat exchangers - Dimensions, tolerances and conventional masses per unit length
- ISO-11496 - Seamless and welded steel tubes for pressure purposes - Ultrasonic testing of tube ends for the detection of laminar imperfections
- ISO-11960 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
- ISO-11961 - Petroleum and natural gas industries - Steel drill pipe
- ISO-11961-AM1 - - Amendment 1
- ISO-12095 - Seamless and welded steel tubes for pressure purposes - Liquid penetrant testing
- ISO-12096 - Submerged arc-welded steel tubes for pressure purposes - Radiographic testing of the weld seam for the detection of imperfections
- ISO-12633-1 - Hot-finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
- ISO-12633-2 - Hot-finished structural hollow sections of non-alloy and fine grain steels - Part 2: Dimensions and sectional properties
- ISO-13470 - Trenchless applications of ductile iron pipes systems - Product design and installation
- ISO-13663 - Welded steel tubes for pressure purposes - Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
- ISO-13664 - Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections
- ISO-13665 - Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections
- ISO-13680 - Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions
- ISO-16132 - Ductile iron pipes and fittings - Seal coats for cement mortar linings
- ISO-16440 - Petroleum and natural gas industries - Pipeline transportation systems - Design, construction and maintenance of steel cased pipelines
- ISO-16631 - Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement
- ISO-2037 - Stainless steel tubes for the food industry
- ISO-21053 - Life cycle analysis and recycling of ductile iron pipes for water applications
- ISO-23991 - Irrigation applications of ductile iron pipelines - Product design and installation
- ISO-2531 - Ductile iron pipes, fittings, accessories and their joints for water applications
- ISO-2937 - Plain end seamless steel tubes for mechanical application
- ISO-3183 - Petroleum and natural gas industries - Steel pipe for pipeline transportation systems
- ISO-3183-1 - Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 1: Pipes of requirement class A
- ISO-3183-2 - Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 2: Pipes of requirements class B
- ISO-3183-3 - Petroleum and natural gas industries -- Steel pipe for pipelines -- Technical delivery conditions -- Part 3: Pipes of requirement class C
- ISO-3183-AM1 - - Amendment 1
- ISO-4019 - Structural steels - Cold-formed, welded, structural hollow sections - Dimensions and sectional properties
- ISO-4179 - Ductile iron pipes and fittings for pressure and non-pressure pipelines - Cement mortar lining
- ISO-559 - Steel tubes for water and sewage
- ISO-657-14 - Hot-rolled steel sections - Part 14: Hot-finished structural hollow sections - Dimensions and sectional properties
- ISO-6594 - Cast iron drainage pipes and fittings - Spigot series
- ISO-6758 - Welded steel tubes for heat exchangers
- ISO-6759 - Seamless steel tubes for heat exchangers
- ISO-9302 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Electromagnetic testing for verification of hydraulic leak-tightness
- ISO-9303 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Full peripheral ultrasonic testing for the detection of longitudinal imperfections
- ISO-9304 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Eddy current testing for the detection of imperfections
- ISO-9305 - Seamless steel tubes for pressure purposes - Full peripheral ultrasonic testing for the detection of transverse imperfections
- ISO-9329-1 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Unalloyed steels with specified room temperature properties
- ISO-9329-2 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
- ISO-9329-3 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties
- ISO-9329-4 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels
- ISO-9330-1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Unalloyed steel tubes with specified room temperature properties
- ISO-9330-2 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties
- ISO-9330-3 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
- ISO-9330-4 - Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
- ISO-9330-5 - Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
- ISO-9330-6 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes
- ISO-9349 - Ductile iron pipes, fittings, accessories and their joints - Thermal preinsulated products
- ISO-9402 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
- ISO-9598 - Seamless steel tubes for pressure purposes - Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
- ISO-9764 - Electric resistance and induction welded steel tubes for pressure purposes - Ultrasonic testing of the weld seam for the detection of longitudinal imperfections
- ISO-9765 - Submerged arc-welded steel tubes for pressure purposes - Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
Other SDOs:
- DIN-EN-10210-1 - Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions; German version EN 10210-1:2006
- DIN-EN-10210-2 - Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10210-2:2006
- DIN-EN-10216-1 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2013
- DIN-EN-10216-2 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2013
- DIN-EN-10216-3 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2013
- DIN-EN-10216-4 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2013
- DIN-EN-10216-5 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes; German version EN 10216-5:2013
- DIN-EN-10217-1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10217-1:2002 + A1:2005
- DIN-EN-10217-2 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-2:2002 + A1:2005
- DIN-EN-10217-3 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10217-3:2002 + A1:2005
- DIN-EN-10217-4 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-4:2002 + A1:2005
- DIN-EN-10217-5 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-5:2002 + A1:2005
- DIN-EN-10217-6 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-6:2002 + A1:2005
- DIN-EN-10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes; German version EN 10217-7:2014
- DIN-EN-10219-1 - Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions; German version EN 10219-1:2006
- DIN-EN-10219-2 - Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10219-2:2006
- DIN-EN-10294-1 - Part 1: Non Alloy & Alloy Steels, Hollow Bars for Machining - Technical Delivery Cond
- DIN-EN-10296-2 - Part 2: Stainless Steel, Welded Circular Steel Tubes for Mechanical & General Engineer
- DIN-EN-10297-2 - Part 2: Stainless Steel, Seamless Steel Tubes for Mechanical & General Engineering Pur
- DIN-EN-10305-1 - Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes; German version EN 10305-1:2016
- DIN-EN-10305-2 - Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes; German version EN 10305-2:2016
- DIN-EN-10305-3 - Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes; German version EN 10305-3:2016
- DIN-EN-10305-4 - Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-4:2016
- DIN-EN-10305-5 - Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes; German version EN 10305-5:2016
- DIN-EN-10305-6 - Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-6:2016
- EN-10210-1 - Part 1: Technical Delivery Conditions, Hot Finished Structural Hollow Sections of Non-
- EN-10210-2 - Part 2: Tolerances, Dimensions & Sectional Properties, Hot Finished Structural Hollow
- EN-10216-1 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
- EN-10216-2 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
- EN-10216-3 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
- EN-10216-4 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
- EN-10216-5 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
- EN-10217-1 - Part 1: Non-Alloy Steel Tubes With Specified Room Temperature Properties, Welded Steel
- EN-10217-2 - Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
- EN-10217-3 - Part 3: Alloy Fine Grain Steel Tubes, Welded Steel Tubes Forpressure Purposes - Techni
- EN-10217-4 - Part 4: Electric Welded Non-Alloy Steel Tubes With Specified Low Temperature Propertie
- EN-10217-5 - Part 5: Submerged Arc Welded Non-Alloy & Alloy Steel Tubes With Specified Elevated Tem
- EN-10217-6 - Part 6: Submerged Arc Welded Non-Alloy Steel Tubes With Specified Low Temperature Prop
- EN-10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
- EN-10219-1 - Part 1: Technical Delivery Conditions, Cold Formed Welded Structural Hollow Sections O
- EN-10219-2 - Part 2: Tolerances, Dimensions & Sectional Properties, Cold Formed Welded Structural
- EN-10225-4 - Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections
- EN-10290 - Steel Tubes & Fittings for Onshore & Offshore Pipelines, External Liquid Applied Polyu
- EN-10294-1 - Part 1: Non Alloy & Alloy Steels, Hollow Bars for Machining - Technical Delivery Cond
- EN-10294-2 - Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties
- EN-10296-2 - Part 2: Stainless Steel, Welded Circular Steel Tubes for Mechanical & General Engineer
- EN-10297-2 - Part 2: Stainless Steel, Seamless Steel Tubes for Mechanical & General Engineering Pur
- EN-10305-1 - Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
- EN-10305-2 - Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
- EN-10305-3 - Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
- EN-10305-4 - Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
- EN-10305-5 - Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
- EN-10305-6 - Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
- EN-ISO-10893-1 - Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
- EN-ISO-10893-10 - Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
- EN-ISO-10893-11 - Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
- EN-ISO-10893-12 - Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
- EN-ISO-10893-2 - Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
- EN-ISO-11960 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014)
- EN-ISO-11961 - Petroleum & Natural Gas Industries - Steel Drill Pipe
- EN-ISO-16440 - Petroleum and natural gas industries - Pipeline transportation systems - Design, construction and maintenance of steel cased pipelines
- EN-ISO-3183 - Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2012)
- JIS-A-5525 - Steel pipe piles
- JIS-A-5530 - Steel pipe sheet piles
- JIS-G-0583 - Automated eddy current examination of steel pipes and tubes
- JIS-G-0584 - Ultrasonic examination for arc welded steel pipes
- JIS-G-3447 - Stainless steel sanitary pipes
- JIS-G-3447-AM1 - Stainless steel sanitary pipes (Amendment 1)
- JIS-G-3447 JAPANESE - Japanese Language - STAINLESS STEEL SANITARY PIPES
- JIS-G-3448 - Light gauge stainless steel tubes for ordinary piping
- JIS-G-3457 - Arc welded carbon steel pipes
- JIS-G-3461 - Carbon steel boiler and heat exchanger tubes
- JIS-G-3461-AM1 - Carbon steel boiler and heat exchanger tubes (Amendment 1)
- JIS-G-3462 - Alloy steel tubes for boiler and heat exchanger
- JIS-G-3462-AM1 - Alloy steel tubes for boiler and heat exchanger (Amendment 1)
- JIS-G-3463 - Stainless steel boiler and heat exchanger tubes
- JIS-G-3463-AM1 - Stainless steel boiler and heat exchanger tubes (Amendment 1)
- JIS-G-3467-AM1 - Steel tubes for fired heater (Amendment 1)
- JIS-G-3468 - Large diameter welded stainless steel pipes
- JIS-G-3470 - Corrugated steel section
- SIS-EN-10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
- SS-EN-10210-1 - Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
- SS-EN-10210-2 - Hot finished steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
- SS-EN-10210-3 - Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
- SS-EN-10213 - Steel castings for pressure purposes
- SS-EN-10216-1 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
- SS-EN-10216-2 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
- SS-EN-10216-3 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
- SS-EN-10216-4 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
- SS-EN-10216-5 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
- SS-EN-10217-1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
- SS-EN-10217-1-AM1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
- SS-EN-10217-2 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
- SS-EN-10217-2-AM1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
- SS-EN-10217-3 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
- SS-EN-10217-3-AM1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
- SS-EN-10217-4 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
- SS-EN-10217-4-AM1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
- SS-EN-10217-5 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
- SS-EN-10217-5-AM1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
- SS-EN-10217-6 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
- SS-EN-10217-6-AM1 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
- SS-EN-10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
- SS-EN-10219-1 - Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
- SS-EN-10219-2 - Cold formed welded steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
- SS-EN-10219-3 - Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
- SS-EN-10220 - Seamless and welded steel tubes - Dimensions and masses per unit length
- SS-EN-10225-4 - Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections
- SS-EN-10238 - Automatically blast-cleaned and automatically prefabrication primed structural steel products
- SS-EN-10240 - Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanizedcoatings
- SS-EN-10266 - Steel tubes, fittings and structural hollow sections - Symbols an definitions of terms for use in product standards
- SS-EN-10294-1 - Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels
- SS-EN-10294-2 - Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties
- SS-EN-10296-1 - Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
- SS-EN-10296-2 - Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
- SS-EN-10297-1 - Seamless circular steel tubes for mechanical and general engineering purposes -Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
- SS-EN-10297-2 - Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
- SS-EN-10305-1 - Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
- SS-EN-10305-2 - Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
- SS-EN-10305-3 - Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
- SS-EN-10305-4 - Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
- SS-EN-10305-5 - Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
- SS-EN-10305-6 - Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
- SS-EN-12945 - Liming materials - Determination of neutralizing value - Titrimetric methods
- SS-EN-13225 - Precast concrete products - Linear structural elements
- SS-EN-13229 - Inset appliances including open fires by solid fuels - Requirements and test methods
- SS-EN-17800 - Life cycle cost (LCC) and life cycle assessment (LCA) for CO2 emissions in ductile iron pipe systems
- SS-EN-39 - Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions
- SS-EN-523 - Steel strip sheaths for prestressing tendons - Terminology, requirements, quality control
- SS-EN-ISO-10893-1 - Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011)
- SS-EN-ISO-10893-10 - Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011)
- SS-EN-ISO-10893-10-AM1 - Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
- SS-EN-ISO-10893-11 - Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011)
- SS-EN-ISO-10893-11-AM1 - Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
- SS-EN-ISO-10893-12 - Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011)
- SS-EN-ISO-10893-12-AM1 - Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
- SS-EN-ISO-10893-1-AM1 - Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
- SS-EN-ISO-10893-2 - Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)
- SS-EN-ISO-10893-2-AM1 - Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
- SS-EN-ISO-10893-3 - Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011)
- SS-EN-ISO-10893-3-AM1 - Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
- SS-EN-ISO-10893-3-AM2 - Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
- SS-EN-ISO-10893-4 - Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011)
- SS-EN-ISO-10893-5 - Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011)
- SS-EN-ISO-10893-6 - Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)
- SS-EN-ISO-10893-7 - Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
- SS-EN-ISO-10893-8 - Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011)
- SS-EN-ISO-10893-8-AM1 - Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
- SS-EN-ISO-10893-9 - Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011)
- SS-EN-ISO-10893-9-AM1 - Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
- SS-EN-ISO-11960 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
- SS-EN-ISO-11961 - Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018)
- SS-EN-ISO-11961-AM1 - Petroleum and natural gas industries - Steel drill pipe - Amendment 1 (ISO 11961:2018/Amd 1:2020)
- SS-EN-ISO-13680 - Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020)
- SS-EN-ISO-16440 - Petroleum and natural gas industries - Pipeline transportation systems - Design, construction and maintenance of steel cased pipelines (ISO 16440:2016)
- SS-EN-ISO-20074 - Petroleum and natural gas industry - Pipeline transportation systems - Geological hazards risk management for onshore pipeline (ISO 20074:2019)
- SS-EN-ISO-3183 - Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2019)
- SS-ISO-10763 - Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures (ISO 10763:2020, IDT)
- SS-ISO-11886 - Building construction machinery and equipment Pile driving and extracting equipment Terminology and commercial specifications (ISO 11886:2002, IDT)
- SS-ISO-22580 - Flares for combustion of biogas (ISO 22580:2020, IDT)
- SS-ISO-702-2 - Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2: Camlock type (ISO 702-2:2007, IDT)
- SS-ISO-7487-3 - Information processing - Data interchange on 130 mm flexible disk cartidiges using modified frequency modulation recording at 7958 ftprad, 1,9 tpmm, on two sides - Part 3: Track format B. Technical Corrigendum 1
- UNE-EN-10216-5 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
- UNE-EN-10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes