Document Center List of Standards on Ceramic Products Ceramic Tiles, See 91.100.23 Ceramic Building Products, See 91.100.25 Sanitary Ceramic Products, See 91.140.70
ICS Code 81.060.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1161 - Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM-C1212 - Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids (Withdrawn 2018)
- ASTM-C1300 - Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
- ASTM-C1466 - Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
- ASTM-C1678 - Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
- ASTM-C1863 - Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
- ASTM-C1870 - Standard Test Method for Determination of Impact Diameter from Falling Ball on Ceramic Tile
- ASTM-C242 - Standard Terminology of Ceramic Whitewares and Related Products
- ASTM-C329 - Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
- ASTM-C346 - Standard Test Method for 45-deg Specular Gloss of Ceramic Materials (Withdrawn 2023)
- ASTM-C370 - Standard Test Method for Moisture Expansion of Fired Whiteware Products
- ASTM-C373 - Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products
- ASTM-C408 - Standard Test Method for Thermal Conductivity of Whiteware Ceramics
- ASTM-C424 - Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
- ASTM-C554 - Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
- ASTM-C584 - Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
- ASTM-C674 - Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
- ASTM-C738 - Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
- ASTM-C773 - Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
- ASTM-C848 - Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance
- ASTM-C849 - Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
- ASTM-C872 - Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
- ASTM-C949 - Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
- ASTM-D1829 - Standard Test Method for Electrical Resistance of Ceramic Materials at Elevated Temperatures (Withdrawn 2001)
- ASTM-D2442 - Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
- ASTM-D2757 - Standard Specification for Impervious Steatite Ceramics for Electrical and Electronic Applications (Withdrawn 2001)
- ASTM-E1875 - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
- ASTM-E1876 - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
- ASTM-E3031 - Standard Practice for Determination of Antibacterial Activity on Ceramic Surfaces
- ASTM-F109 - Standard Terminology Relating to Surface Imperfections on Ceramics
- ASTM-F356 - Specification for Beryllia Ceramics for Electronic and Electrical Applications (Withdrawn 2001)
- ASTM-F417 - Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
- ASTM-F77 - Test Method for Apparent Density of Ceramics for Electron Device and Semiconductor Application (Withdrawn 2001)
- ASTM-F865 - Test Methods for Gross Camber of Ceramic Substrates for Thick Film Applications (Withdrawn 2001)
BSI:
- BS-4789 - Specification for ceramic components for use in envelopes for electronic tubes
- BS-6748 - Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware
- BS-8654 - Domestic and hospitality use ceramic tableware articles intended for contact with foodstuffs. Specification
- BS-EN-1217 - Materials and articles in contact with foodstuffs. Test methods for water absorption of ceramic articles
- BS-EN-13258 - Materials and articles in contact with foodstuffs. Test methods for crazing resistance of ceramic articles
- BS-ISO-6486-1 - Ceramic ware, glass ceramic ware and glass dinnerware in contact with food. Release of lead and cadmium
- PAS-54 - Specification for domestic ceramicware and glassware. Articles intended for contact with foodstuffs, and vases
ISO:
- ISO-5644 - Porcelain Tableware - Specification and test method
- ISO-6486-1 - Ceramic ware, glass ceramic ware and glass dinnerware in contact with food - Release of lead and cadmium - Part 1: Test method
- ISO-6486-2 - Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food -- Release of lead and cadmium -- Part 2: Permissible limits
- ISO-8391-1 - Ceramic cookware in contact with food - Release of lead and cadmium - Part 1: Method of test
- ISO-8391-2 - Ceramic cookware in contact with food - Release of lead and cadmium - Part 2: Permissible limits
Other SDOs:
- CSA-C373 - Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products, Ceramic Tiles, and Glass Tiles
- JIS-R-1401 - Non-Metallic protection tubes for thermocouples
- SS-EN-100 - Ceramic tiles - Determination of modulus of rupture
- SS-EN-1007-4 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature
- SS-EN-101 - Ceramic tiles - Determination of scratch hardness of surface according to Mohs
- SS-EN-102 - Ceramic tiles - Determination of resistance to deep abrasion Unglazed tiles
- SS-EN-103 - Ceramic tiles - Determination of linear thermal expansion
- SS-EN-104 - Ceramic tiles - Determination of resistance to thermal shock
- SS-EN-105 - Ceramic tiles - Determination of crazing resistance - Glazed tiles
- SS-EN-106 - Ceramic tiles - Determination of chemical resistance - Glazed tiles
- SS-EN-1071-3 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test
- SS-EN-1071-4 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA)
- SS-EN-1159-3 - Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
- SS-EN-1217 - Materials and articles in contact with foodstuffs- Test methods for water absorption of ceramic articles
- SS-EN-122 - Ceramic tiles - Determination of chemical resistance - Glazed tiles
- SS-EN-1388-1 - Materials and articles in contact with foodstuffs- Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware
- SS-EN-1388-2 - Materials and articles in contact with foodstuffs- Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
- SS-EN-154 - Ceramic tiles - Determination of resistance to surface abrasion Glazed tiles
- SS-EN-155 - Ceramic tiles - Determination of moisture expansion using boilingwater - Unglazed tiles
- SS-EN-202 - Ceramic tiles - Determination of frost resistance
- SS-EN-623-1 - Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 1: Determination of the presence of defects by dye penetration
- SS-EN-623-2 - Advanced technical ceramics - Monolithic ceramics- General and textural properties - Part 2: Determination of density and porosity
- SS-EN-821-1 - Advanced technical ceramics - Monolithic ceramics- Thermo-physical properties - Part 1: Determination of thermal expansion
- SS-EN-843-1 - Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength
- SS-EN-98 - Ceramic tiles - Determination of dimensions and surface quality
- SS-EN-99 - Ceramic tiles - Determination of water absorption
- SS-EN-ISO-17562 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique (ISO 17562:2016)
- SS-EN-ISO-19628 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity (ISO 19628:2017)
- SS-EN-ISO-20502 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing (ISO 20502:2005 including Cor 1:2009)
- SS-EN-ISO-9630 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature (ISO 19630:2017)
- SS-ENV-1006 - Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties
- SS-ENV-1007-1 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 2: Determination of size content
- SS-ENV-1007-2 - Advanced tehnical ceramics - Ceramic composites: Methods of test for reinforcements - Part 2: Determination of linear density
- SS-ENV-1007-3 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 3: Determination of filament diameter
- SS-ENV-1007-4 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 4: Determination of tensile properties of filament at ambient temperature
- SS-ENV-1071-1 - Advanced technical ceramics - Methods of test forceramic coatings - Part 1: Determination of coating thickness by contact probe profilometer
- SS-ENV-1071-2 - Advanced technical ceramics - Methods of test forceramic coatings - Part 2: Determination of coating thickness by the cap grinding method
- SS-ENV-1071-3 - Advanced technical ceramics - Methods of test forceramic coatings - Part 3: Determination of adhesion by a scratch test
- SS-ENV-1071-4 - Advanced technical ceramics - Methods of test forceramic coatings - Part 4: Determination of chemical composition
- SS-ENV-1071-5 - Advanced technical ceramics - Methods of test forceramic coatings - Part 5: Determination of porosity
- SS-ENV-1159-1 - Advanced technical ceramics - Ceramic composites - Thermo physical properties - Part 1: Determination of thermal expansion
- SS-ENV-1159-2 - Advanced technical ceramics - Ceramic composites - Thermo-physical properties - Part 2: Determination of thermal diffusivity
- SS-ENV-1159-3 - Advanced technical ceramics - Ceramic composites,thermophysical properties - Part 3: Determinationof specific heat capacity
- SS-ENV-12289 - Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties
- SS-ENV-12290 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature underinert atmosphere - Determination of compression properties
- SS-ENV-12291 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmosphere pressure - Determination of compression properties
- SS-ENV-1389 - Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity
- SS-ENV-1892 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature underinert atmosphere - Determination of tensile properties
- SS-ENV-1893 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties
- SS-ENV-1894 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature underinert atmosphere - Determination of shear strength by compression loading of notched specimens
- SS-ENV-623-3 - Advanced technical ceramics - Monolithic ceramics- General and textural properties - Part 3: Determination of grain size
- SS-ENV-623-4 - Advanced technical ceramics - Monolithic ceramics- General and textural properties - Part 4: Determination of surface roughness
- SS-ENV-658-1 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile strength
- SS-ENV-658-2 - Advanced technical ceramics - Mechanical proterties of ceramic composites at room temperature - Part 1: Determination of compressive strength
- SS-ENV-658-3 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength
- SS-ENV-658-4 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of shear strength by compression loading of notched specimens
- SS-ENV-658-5 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short spanbend test (three-point)
- SS-ENV-658-6 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 6: Determination of shear strength by double-punch shearing
- SS-ENV-820-1 - Advanced technical ceramics - Monolithic ceramics- Thermomechanical properties - Part 1: Determination of flexural strength at elevated temperatures
- SS-ENV-820-3 - Advanced technical ceramics - Monolithic ceramics- Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching
- SS-ENV-821-3 - Advanced technical ceramics - Monolithic ceramics- Thermo-physical properties - Part 3: Determination of specific heat capacity
- SS-ENV-843-2 - Advanced technical ceramics - Monolithic ceramics- Mechanical properties at room temperature - Part 2: Determination of eleastic moduli
- SS-ENV-843-3 - Advanced technical ceramics - Monolithic ceramics- Mechanical properties at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength
- SS-ENV-843-4 - Advanced technical ceramics - Monolithic ceramics- Mechanical properties at room temperature - Part 4: Vickers, Knoop and Rockwell Superficial hardness tests
- SS-ENV-843-5 - Advanced technical ceramics - Monolithic ceramics- Mechanical tests at room temperature - Part 5: Statistical analysis