FSC 4730: Hose, Pipe, Tube, Lubrication, and Railing Fittings
The following documents are a part of this series:
ASTM:
ISO:
US GOVERNMENT DOCUMENTS:
- A-A-2622 - Adapters, Pipe to Hose, Straight or Reducing
- A-A-2921 - Coupling Assemblies and Menders, Hose
- A-A-49614/4 - Coupling Assembly, Hose (Garden, Water, and Water Suction), Long Shank with Pin Lug Swivel
- A-A-50431 - Couplings - Quick Disconnect, Bowes Type (Air Hoses and Piping)
- A-A-50434 - Patch Repair Emergency Water Activated Damage Control
- A-A-50461 - Nozzles; Garden Hose (for 5/8- and 3/4-Inch Hose)
- A-A-50494 - Exhaust Head, Steam
- A-A-50581 - Fittings; Pipe, Steel, Special (for Tanker Unloading Installations)
- A-A-50604 - Expansion Joint, Sleeved, (Non-Flanged), Fire-Retardant, with Retaining Clamps
- A-A-50605 - Expansion Joint, TFE Fluorocarbon Resin, Corrugated with Ductile Iron Flanges
- A-A-50632 - Strainer, Simplex, Continuous Self-Cleaning
- A-A-52403 - Mender, Hose, Low Pressure
- A-A-52405 - Tee, Hose (Low Pressure)
- A-A-52484 - Coupler, Automotive Air Brake Line: Quick-Disconnect
- A-A-52506 - Clamps, Hose
- A-A-52592 - Pipe Fittings: One or more Ends Grooved
- A-A-52598 - Couplings, Clamp, Pipe; with Bolts and Synthetic-Rubber Gaskets for Grooved-End Pipe
- A-A-55535 - Rings, Expansion, Hose, Brass
- A-A-59000 - Strainers, Sediment, Pipeline, Self-Cleaning (Manual or Automated)
- A-A-59006 - Indicators, Pipeline, Flow, Sight
- A-A-59008 - Strainers, Self-Cleaning, Backflush Type (Manual or Automated)
- A-A-59009 - Strainers, Sediment, Pipeline, Self-Cleaning
- A-A-59326 - Coupling Halves, Quick-Disconnect, Cam-Locking Type, General Specification for
- A-A-59326/1 - Coupling Half, Male by Internal Pipe Thread, Type I
- A-A-59326/10 - Coupling Half, Cap, Dust, Type IX
- A-A-59326/11 - Coupling Half, Plug, Dust, Type X
- A-A-59326/12 - Reducer, Male by Female and Female by Male, Type XI
- A-A-59326/13 - Reducer, Male by External Pipe Thread, Type XII
- A-A-59326/14 - Reducer, External Pipe Thread by Female, Type XIII
- A-A-59326/15 - Adapter, 45 Degrees, Female Thread Swivel Collar by Male (Tank Car), Type XV
- A-A-59326/16 - Coupling Half, Female by External Straight Threads, Type XVI, (for use with NATO Equipment)
- A-A-59326/17 - Coupling Half, Male by Internal Straight Threads, Type XVII (for use with NATO Equipment)
- A-A-59326/18 - Coupling Half, Female Reducer by Internal Pipe Thread, Type XVIII
- A-A-59326/19 - Coupling Half, Nipple Adapter, Male by External Grooved Pipe, Type XIX
- A-A-59326/2 - Coupling Half, Male by Hose Shank, Type II
- A-A-59326/20 - Y Connection, Flanged, Type XX
- A-A-59326/21 - Adapter, Male by Male, Cam Locking Type, Type XXI
- A-A-59326/22 - Adapter, Female by Female, CAM Locking Type XXII
- A-A-59326/23 - Coupling Half, Nipple Adapter, Female by External Groove Pipe, Type XXIII
- A-A-59326/3 - Coupling Half, Male by External Pipe Thread, Type III
- A-A-59326/4 - Coupling Half, Male by Flange (TTMA), Type IV
- A-A-59326/5 - Coupling Half, Female by Internal Pipe Thread, Type V
- A-A-59326/6 - Coupling Half, Female by Hose Shank, Type VI
- A-A-59326/7 - Coupling Half, Female by External Pipe Thread, Type VII
- A-A-59326/8 - Coupling Half, Female by Flange,(TTMA), Type VIII
- A-A-59326/9 - Coupling Half, Female by Flange, Hexagon, Type VIIIA, (for D-1 Nozzle)
- A-A-59377 - Coupling Assembly, Quick-Disconnect, Sexless Type
- A-A-59432 - Plugs, Pipe, Magnetic, Headless: Iron, Steel or Aluminum Alloy
- A-A-59439 - Coupling Halves, Quick-Disconnect
- A-A-59442 - Elbows, Tube, 90 and 45 Degree, Solder-Joint, Refrigeration
- A-A-59443 - Adapter, Straight, Pipe Thread to Tube, Male Solder-Joint, Refrigeration
- A-A-59444 - Reducer Coupling, Tube, Male to Female Solder-Joint, Refrigeration
- A-A-59445 - Adapter, Straight, Pipe to Tube, Pipe Thread to Female Solder-Joint, Refrigeration
- A-A-59446 - Elbow, Tube, 90 Degree, Reducing, Solder-Joint, Refrigeration
- A-A-59447 - Reducer Coupling, Tube Female to Female Solder-Joint, Refrigeration
- A-A-59448 - Plug and Cap, Tube, Solder-Joint, Refrigeration
- A-A-59449 - Coupling, Tube, with Stop, Solder-Joint, Refrigeration
- A-A-59450 - Elbows, Tube, Street, 90 and 45 Degree, Solder-Joint, Refrigeration
- A-A-59451 - Tees, Tube, Straight, Solder-Joint, Refrigeration
- A-A-59553 - Coupling Halves, Cap and Wye; Quick Disconnect Pneumatic Hose, Two-Lug Universal Type
- A-A-59614 - Coupling Assembly, Hose (Garden, Water, and Water Suction)
- A-A-59614/1 - Coupling Assembly, Hose (Garden, Water, and Water Suction), Short Shank with Octagon or Hex Swivel, Type I, Style 1
- A-A-59614/2 - Coupling Assembly, Hose (Water and Water Suction), Short Shank with Pin Lug Swivel, Type 1, Style 2
- A-A-59614/3 - Coupling Assembly, Hose (Garden, Water, and Water Suction), Long Shank with Octagon or Hex Swivel, Type I, Style 3
- A-A-59614/4 - Coupling Assembly, Hose (Water and Water Suction), Long Shank with Pin Lug Swivel, Style 4, Type I
- A-A-59614/5 - Coupling Assembly, Hose (Garden and Water), Expansion Shank, Type II, Style 5
- A-A-59614/6 - Coupling Assembly, Hose (Garden and Water), Compression Ferrule, Crimp or Hose Clamp, Type II, Style 6
- A-A-59614/7 - Coupling Assembly, Hose (Water and Water Suction), Rocker Lug Swivel, Type III, Style 7
- A-A-59614/8 - Coupling Assembly, Hose (Water and Water Suction), Expansion Ring, Pin Lug Swivel, Type III, Style 8
- A-A-59614/9 - Coupling Assembly, Hose (Water and Water Suction), Long Handle Swivel, Type III, Style 9
- A-A-59616 - Pipe Fittings: Bushings, Locknuts, and Plugs; Iron, Steel, and Aluminum; (Threaded); 125 - 150 Pounds
- A-A-59617 - Unions, Brass or Bronze, Threaded Pipe Connections & Solder-Joint Tube Connections
- A-A-59733 - Cap Lubrication Fitting
- A-A-59822 - Plug Assemblies, Grippers, OD and ID Types for Temporary Pressure Testing of Water, Oil and Gas Transmission Piping
- A-A-59935 - Conical Seal, Crush, 37 Degree Flared Tube Fitting, General Requirements for
- A-A-59935/1 - Conical Seals, Crush, 37 Degree Flared Tube Fitting, Aluminum Alloy
- A-A-59935/2 - Conical Seals, Crush, 37 Degree Flared Tube Fitting, Copper
- A-A-59935/3 - Conical Seals, Crush, 37 Degree Flared Tube Fitting, Nickel
- A-A-59935/4 - Conical Seals, Crush, 37 Degree Flared Tube Fitting, Corrosion Resistant Steel
- A-A-59935/5 - Conical Seals, Crush, 37 Degree Flared Tube Fitting, Gold
- A-A-59935/6 - Conical Seals, Crush, 37 Degree Flared Tube Fitting, Serrated
- A-A-59949 - Plugs, Plastic (Heat-Exchanger Tube)
- A-A-59997 - Conical Seal, Crush, 24 Degree Flared Tube Fitting, General Requirements for
- A-A-60001 - Traps, Steam
- A-A-60014 - Fittings, Pipe, Threaded, Unions, Malleable Iron, Class 150, 250, and 300, General Requirements for
- A-A-60014/1 - Fittings, Pipe, Threaded, Unions, Malleable Iron, Class 150
- A-A-60014/2 - Fittings, Pipe, Threaded, Unions, Malleable Iorn, Class 250
- A-A-60014/3 - Fittings, Pipe, Threaded, Unions, Malleable Iron, Class 300
- A-A-60041 - Clamps, Hose, Cadmium And Hexavalent-Chromium Free
- A-A-60050 - Fittings, Lubrication, Cadmium and Hexavalent-Chromium Free
- A-A-60051 - Plugs, Pipe and Port, Cadmium and Hexavalent-Chromium Free
- AIR-1378 - Standard Words for Test Paragraphs for Tube Fittings and Tube Assemblies
- AIR-4298 - Impulse Test Machine, Sine Wave, Equipment and Operation Of
- AIR-6553 - Measurement Uncertainty and Consumer Risk
- AMS-2222 - Tolerances Copper and Copper Alloy Sheet, Strip, and Plate
- AMS-2438 - Plating, Chromium, Thin, Hard, Dense Deposit
- AMS-2460 - Plating, Chromium
- AN-2555 - Nozzle - Aircraft Fueling
- AN-286 - Fittings, Lubricator, Pressure-Grip, Type Pt (See ms-15006)
- AN-287 - Fittings - Lubricator, Pressure-Grip, Type D
- AN-290 - Cup - Grease
- AN-295 - Cup - Oil
- AN-4022 - Nipple Assembly - Priming System Jet
- AN-4023 - Elbow Assembly - Priming System Jet
- AN-4024 - Tee Assembly - Priming System Jet
- AN-4049 - Connection - Straight '4 Bolt Flange' Engine Oil (Use ms-28748)
- AN-4053 - Connection - Engine Oil 45 Deg. (4 Bolt Flanges) (Supersedes Usaf Dwg 4489739) (Superseded by ms-28749)
- AN-4111 - Connection - Engine Oil 90 Deg. (4 Bolt Flange)
- AN-4160 - Flange - Oil Connection, 3 Bolt
- AN-4161 - Flange - Oil Connection, 4 Bolt
- AN-4162 - Flange - Hose Connection
- AN-6027 - Coupling Half, Quick Disconnect
- AN-6220 - Coupling Half - Hydraulic Self Sealing (Bulkhead Fitting End)
- AN-6221 - Coupling Half - Hydraulic Self Sealing (Gasket Seal Fitting)
- AN-6222 - Coupling Half - Hydraulic Self Sealing (Swivel Type)
- AN-6223 - Flange - Hydraulic Self Sealing Coupling
- AN-6224 - Nut - Hydraulic Self Sealing Coupling
- AN-6241 - Coupling Assembly - Hydraulic Self Sealing (Gasket Seal and Bulkhead Fitting End)
- AN-6242 - Coupling Assembly - Hydraulic Self Sealing (Gasket Seal and Bulkhead Fitting End With Flange)
- AN-6243 - Coupling Assembly - Hydraulic Self Sealing (Gasket Seal and Universal Fitting End)
- AN-6271 - Hose Assembly - Hydraulic and Pneumatic, Detachable End Fitting Type, Swivel Fittings, for an-H-24 Hose (Superseded by ms-28741)
- AN-6285 - Adapter, Air Pressure Gage
- AN-6289 - Nut, Tube
- AN-6532 - Connector, Hose, Quick Disconnect, Female, Anti, g Suit (Use ms-27755)
- AN-737 - Clamp, Hose, Aircraft
- AN-741 - Clamp & Tube
- AN-756 - Flange, Swivel Fitting, Flanged (Superseded by ms-20756)
- AN-757 - Connector, Hose, Flanged, Fixed (Superseded by ms-20757)
- AN-758 - Elbow - Hose, Flanged, Swivel , 45 Deg. (Superseded by ms-2075)
- AN-759 - Elbow - Hose, Flanged, Swivel, 90 Deg. (Superseded by ms-20759)
- AN-760 - Connector - Flared Tube, Flanged, Fixed (Superseded by ms-20759)
- AN-761 - Elbow - Flared Tube, Flanged, Swivel, 45 Deg. (Superseded by ms-20759)
- AN-762 - Elbow - Flared Tube, Flanged, Swivel, 90 Deg. (Superseded by ms-20759)
- AN-763 - Gasket - Swivel Fitting, Flanged
- AN-774 - Bolt - Flared Tube Fitting End Universal
- AN-776 - Connector, Multiple Fluid Pressure Line 90 Degree
- AN-777 - Connector, Multiple Fluid Pressure Line, 75 Degree
- AN-778 - Connector, Multiple Fluid Pressure Line, 45 Degree
- AN-779 - Connector, Multiple Fluid Pressure Line, Straight
- AN-780 - Nipple, Union
- AN-781 - Nipple - Electrical Terminal (Use Ms 25171)
- AN-782 - Fitting End - Hydraulic and Pneumatic Hose Swivel, Detachable for an-H-24 Hose (Superseded by ms-28740)
- AN-783 - Tee, Flared Tube Internal Thread on Side
- AN-784 - Tee, Flared Tube, Internal Thread on Run
- AN-785 - Coupling, Union, Brazing
- AN-786 - Coupling - Airspeed Tube Union (Brazing), Military Specification
- AN-790 - Elbow, Union
- AN-791 - Elbow, Union, 45 Degree
- AN-792 - Fitting Assembly and Hose Swivel Detachable (See ms-28740)
- AN-795 - Tee, Union
- AN-800 - Cone, Union
- AN-801 - Connection, Straight Flanged Hose (Supersedes Usaf Dwg 44D17541 (Cancelled No Superseding Document)
- AN-8019 - Tee - Flyer's Relief Tube
- AN-802 - Connection, 45 Deg. Flanged Hose, (Supersedes Usaf Dwg 44D17545)
- AN-803 - Connection, 90 Deg. Flanged Hose (Supersedes Usaf Dwg 17548)
- AN-804 - Tee, Flared Tube With Bulkhead on Run
- AN-805 - Nut, Union
- AN-806 - Plug Flared Tube
- AN-807 - Adapter, Straight, Tube to Hose
- AN-814 - Plug - Bleeder - Screw Thread
- AN-815 - Union - Flared Tube
- AN-816 - Adapter, Straight, Pipe To Tube
- AN-817 - Nut, Tube Coupling, Long
- AN-818 - Nut, Tube Coupling, Short
- AN-819 - Sleeve, Coupling (Cancelled, Superseded by ms-20819 )
- AN-821 - Elbow Flared Tube, 90 Deg.
- AN-822 - Elbow - Flared Tube and Pipe Thread, 90Deg.
- AN-823 - Elbow - Flared Tube and Pipe Thread, 45 Deg.
- AN-824 - Tee - Flared Tube
- AN-825 - Tee - Flared Tube With Pipe Thread on Side
- AN-826 - Tee - Flared Tube With Pipe Thread on Run
- AN-827 - Cross, Flared Tube
- AN-832 - Union, Flared Tube, 3/8 Bulkhead and Universal
- AN-833 - Elbow Flared Tube and Bulkhead Universal, 90 Deg
- AN-834 - Tee, Bulkhead and Universal Flared Tube
- AN-837 - Elbow, Flared Tube and Universal, 45 Deg.
- AN-838 - Elbow, Tube to Hose, 90 Degrees
- AN-839 - Elbow, Tube to Hose, 45 Degrees
- AN-840 - Adapter, Straight, Pipe to Hose
- AN-841 - Adapter - Hose to Flared Tube
- AN-842 - Elbow - Pipe to Hose, 90 Degrees
- AN-844 - Elbow - Pipe to Hose, 45 Degrees
- AN-846 - Elbow, Hose, 45 Degrees
- AN-848 - Elbow, Hose, 90 Degrees
- AN-849 - Nipple, Hose
- AN-860 - Flange - Tube Reinforcing
- AN-866 - Flange - Straight Threads and Riveting
- AN-867 - Flange - Pipe Thread Welding
- AN-871 - Flange - Straight Thread Boss Welding
- AN-872 - Flange - Circular Formation Light Mounting
- AN-876 - Collar - Tubing End Hose Connection
- AN-891 - Cross - Primer and Gauge
- AN-893 - Bushing Screw Thread Reducer
- AN-894 - Bushing, Screw Thread, Expander
- AN-906 - Plug - Square Head Drilled for Locking - Tapped (Cancelled, 1960, No Superseding Document)
- AN-909 - Plug - Square Head, Drilled for Locking
- AN-910 - Coupling, Pipe
- AN-911 - Nipple, Pipe
- AN-912 - Bushing, Pipe
- AN-913 - Plug, Square Head Pipe Thread (Use ms-20913)
- AN-914 - Elbow, Pipe, Internal and External Thread, 90 Degrees
- AN-915 - Elbow, Pipe, 45 Degrees
- AN-916 - Elbow, Pipe, Internal Thread, 90 Deg. (Inactive for Design Except for Use on Oxygen Systems)
- AN-917 - Tee, Pipe
- AN-918 - Cross, Pipe
- AN-919 - Reducer External Thread Flared Tube
- AN-924 - Nut, Tube, Bulkhead and Universal Fitting
- AN-926 - Tee - Internal Screw Thread (Superseded by an-938)
- AN-927 - Elbow - Internal Screw Thread (Superseded by an-939)
- AN-928 - Elbow - Internal Screw Thread 45 Deg. (Superseded by an-941)
- AN-929 - Cap Insert, Assembly, Pressure Seal, Flared Tube Fitting
- AN-932 - Plug, Pipe, Countersink Hex Head (Use ms-27769)
- AN-933 - Plug, Pipe, Hex Head
- AN-937 - Cross, Tube, Internal Thread
- AN-938 - Tee, Tube, Internal Thread
- AN-939 - Elbow, Tube, Internal Thread, 90 Degrees
- AN-941 - Elbow, Tube, Internal Thread, 45 Deg.
- AN-944 - Fitting - Lubricator, Aircraft Pressure Grip, Type Nft (Use ms-15001 and ms-15002)
- AND-10050 - Bosses, Standard Dimensions for Gasket Seal Straight Thread
- AND-10051 - Hubs, Conduit Connection, Standard Dimensionsfor
- AND-10052 - Bosses - Standard Dimensions for External Pipe Thread
- AND-10053 - Boss, Pipe-Thread, Internal-Standard Diensions for (Inactive for Design Except for Oxygen Systems
- AND-10059 - Fittings - Styles of Pipe Threaded, Flared Tube and Hose
- AND-10070 - Adapter - Oxygen Filler +Cancelled, 1994, Use an-6027
- AND-10071 - Boss and Installations - Air Connection (AN6287)
- AND-10089 - Fitting End, Design Standard for Cone Connection
- AND-10380 - Coupling Installations, Standard Conduit, Electrical
- ANSI-A21.14 - Ductile Iron Fittings, 3-Inch Through 24-Inch for Gas (AWWA-C114 - Withdrawn)
- ANSI-B16.14 - Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads (History Record for ASME B16.14)
- ANSI-B16.15 - Cast Bronze Threaded Fittings (in the System as: ASME-B16.15)
- ANSI-B16.23 - Cast Copper Alloy Solder Joint Drainage Fittings (Dwv)
- ANSI-B16.24 - Cast Copper Alloy Pipe Flanges & Flanged Fittings: Class 150,300,400,600,900,1500 & 2500
- ARP-1201 - Tolerances, Hexagon Bar, Machined Flat and Forged Wrenching Flat Sizes for Fluid Fittings
- ARP-1536 - Abrasion Test Procedure for Chafe Guard
- ARP-1590 - Recommended Part Numbering Guidelines for Fluid System Components Inch System of Measurement
- ARP-891 - Determination of Aluminum Alloy Tempers Through Electrical Conductivity Measurement (Eddy
- AS-100 - Fitting, Cross, Short Flareless
- AS-1001 - Fitting, Tee, Standard and Reducer, Bulkhead on Run, Internal Port on Side, Flareless
- AS-1002 - Fitting, Tee, Standard and Reducer, Bulkhead and Internal Port on Run, Flareless
- AS-1003 - Fitting, Tee, Standard and Reducer, Bulkhead on Run, Flareless
- AS-1004 - Fitting, Elbow, 90°, Standard and Reducer, Flareless
- AS-1005 - Fitting, Tee, Standard and Reducer, Flareless
- AS-1006 - Fitting, Cross, Standard and Reducer, Flareless
- AS-1007 - Fitting, Union, Standard and Reducer, Bulkhead, Flareless
- AS-1008 - Fitting, Elbow, 90 Degree, Standard and Reducer, Bulkhead, Flareless
- AS-1009 - Fitting, Tee, Standard and Reducer, Bulkhead on Side, Flareless
- AS-101 - Cross Assembly, Retained Nut, Short Flareless
- AS-1010 - Fitting, Elbow, 45 Degree, Standard and Reducer, Bulkhead, Flareless
- AS-102 - Fitting, Cross, Reducer, Flareless and Short Flareless
- AS-103 - Fitting Assembly, Cross, Flareless and Short Flareless, Reducer, Retained Nut
- AS-1031 - Fitting, Tee, Standard & Reducer, Bulkhead on Run, Internalport on Side, Flared
- AS-1032 - Fitting, Tee, Standard & Reducer, Bulkhead on Run, Internalport on Run, Flared
- AS-1033 - Fitting, Tee, Standard and Reducer, Bulkhead on Run, Flared
- AS-1034 - Fitting, Elbow, 90°, Standard and Reducer, Flared
- AS-1035 - Fitting, Tee, Standard and Reducer, Flared
- AS-1036 - Fitting, Cross, Standard and Reducer, Flared
- AS-1037 - Fitting, Union, Standard and Reducer, Bulkhead, Flared
- AS-1038 - Fitting, Elbow, 90°, Standard and Reducer, Bulkhead, Flared
- AS-1039 - Fitting, Tee, Standard and Reducer, Bulkhead on Side, Flared
- AS-1040 - Fitting, Elbow, 45°, Standard and Reducer, Bulkhead, Flared
- AS-1097 - Seal Ring, 37 Degrees Flared, Tube Fitting End
- AS-1098 - Fitting End, Flared Tube, for Seal Ring, Standard Dimensionsfor, Design Standard
- AS-1099 - Fitting End, Bulkhead Flared Tube, for Seal Ring, Standard Dimensions for, Design Standard
- AS-1249 - Elbow, 45 Degrees, Flared Tube Bulkhead, Universal, for Sealring
- AS-1250 - Elbow, 90°, Flared Tube for Seal Ring
- AS-1251 - Fitting, Union, Flared Tube, for Seal Ring
- AS-1252 - Tee, Flared Tube for Seal Ring
- AS-1253 - Tee, Flared Tube, Bulkhead Universal on Side, for Seal Ring
- AS-1299 - Adapter - Port Connection, Ring Locked To Flareless Tube End
- AS-1300 - Port - Ring Locked Fluid Connection Type, Standard Dimensions For
- AS-1365 - Tee, Flared Tube, Bulkhead Universal on Run, for Seal Ring
- AS-1366 - Elbow, 90 Degrees, Flared Tube Bulkhead, Universal, for Sealring
- AS-1367 - Cross, Flared Tube for Seal Ring
- AS-1368 - Fitting, Reducer-External Thread Flared Tube for Seal Ring
- AS-1369 - Fitting, Plug, Flared Tube, for Seal Ring
- AS-1376 - Alternate Dimensions, Center Body Section, Shape Fluid Fittings, Design Standard
- AS-15000 - Fitting End, Lubrication, Hydraulic - Design Standard
- AS-15001 - Fitting, Lubrication, Hydraulic, Surface Check, .250-28 Taper Threads, Steel, Type I (STABILIZED Aug 2017)
- AS-15002 - Fitting, Lubrication, Hydraulic, Surface Check, Straight Threads, Steel, Type Ii
- AS-15003 - Fitting, Lubrication, Hydraulic, Surface Check, 1/8 Pipe Threads, Steel, Type Iii
- AS-15004 - Fitting, Lubrication, Hydraulic, Surface Check, .250-28 Taper Threads, Nickel-Copper Alloy, Type IV (STABILIZED Aug 2017)
- AS-15005 - Fitting, Lubrication, Hydraulic, Throat or Surface Check, 1/8 Pipe Threads, Nickel-Copper Alloy, Type V (STABILIZED Aug 2017)
- AS-15720 - Fitting, Lubrication, Hydraulic, Throat or Surface Check, .250-28 Taper Threads, Corrosion
- AS-15721 - Fitting, Lubrication, Hydraulic, Throat or Surface Check, 1/8 Pipe Threads, Corrosion Resi
- AS-1577 - Tube End, Weld Design Standard
- AS-1579 - Fitting End, Integral Weld, Lip, Design Standard
- AS-1580 - Ring, Weld, 3000 psi, Titanium
- AS-1581 - Fitting, Sleeve, Flareless Acorn to Integral Weld Ring, 3000 psi
- AS-1582 - Fitting, Adapter, External Thread Flareless to Integral Weld Ring, 3000 psi
- AS-1583 - Fitting, Tee, Integral Weld Ring, 3000 psi
- AS-1584 - Fitting, Elbow, 90 degree, Integral Weld Ring, 3000 psi
- AS-1585 - Fitting, Reducer, Integral Weld Ring, 3000 psi
- AS-1624 - Hose, Polytetrafluoroethylene (Tfe), Lightweight 3,000 Psi,High Temperature, Hydraulic &
- AS-1651 - Assembled Coupling, Threadless - Flexible, Fixed Cavity, Self-Bonding, Envelope Dimensions
- AS-1653 - Male Ferrule, Threadless - Flexible, Fixed Cavity, Self-Bonding, Swaged
- AS-1654 - Sleeve, Threadless - Flexible, Fixed Cavity, Self-Bonding
- AS-1655 - Coupling Body, Threadless - Flexible, Fixed Cavity, Self-Bonding
- AS-1656 - Fitting End, Threadless - Flexible, Fixed Cavity, Self-Bonding, Male & Female, Design
- AS-1701 - Lubricant, Solid Film
- AS-1708 - Fitting End, Internal Flare, Design Standard
- AS-1711 - Coupling, Flexible, Variable Cavity, Threaded Ferrule Type Tube Ends, Envelope Dimensions
- AS-1719 - Fitting End, Half-Coupling, Flexible Variable Cavity Threaded, Ferrule Type Design Standar
- AS-1720 - Ferrule End, Coupling, Flexible, Variable Cavity, Threaded, Ferrule Type, Design Standard
- AS-1730 - Coupling, Fuel, Rigid, Threaded Type
- AS-1731 - Coupling, Rigid, Fixed Cavity, Threaded Ferrule Type Tube Ends, Envelope Dimensions Design
- AS-1732 - Body, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I
- AS-1733 - Body, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type TUBE ENDS, TYPE II
- AS-1734 - Nut, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I
- AS-1735 - Nut, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type II
- AS-1736 - Washer, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends
- AS-1737 - Ferrule, Coupling, Rigid, Fixed Cavity Threaded, Ferrule Type Tube Ends
- AS-1738 - Nut Assembly Coupling, Rigid, Fixed Cavity, Threaded Ferrule Type Tube Ends
- AS-1857 - Fitting End, Non-Reversible, Flareless Tube Connection, Oversize Thread
- AS-1858 - Fitting End, Non-Reversible, Flared Tube Connection, Oversize Thread
- AS-1859 - Fitting End, Non-Reversible, Straight Thread, Boss Connection
- AS-1860 - Nut, Sleeve Coupling, Tube Reducer, Flareless
- AS-1861 - Nut, Sleeve Coupling, Tube Reducer, Flared
- AS-1893 - Ring, Weld, 3000 psi, Cres
- AS-1941 - Fitting End, Straight Thread, High Pressure, Boss Connection, Design Standard
- AS-1958 - Port - Fluid Connection, Ring Locked Insert, Standards Dimensions For
- AS-1985 - Fitting, Assembly, Adapter Ring Locked Port Connection to Flared Tube End
- AS-21900 - Adapter, Flareless Tube to A Flared Tube
- AS-21902 - Union, Flareless Tube
- AS-21904 - Elbow, Flareless Tube, 90°
- AS-21905 - Tee, Flareless Tube
- AS-21906 - Cross, Flareless Tube
- AS-21907 - Elbow, Bulkhead Universal, 45°, Flareless Tube
- AS-21908 - Elbow, Bulkhead Universal 90°, Flareless Tube
- AS-21909 - Tee, Bulkhead and Universal, Flareless Tube
- AS-21910 - Tee, Bulkhead, Flareless Tube, Internal Thread on Side
- AS-21911 - Tee, Bulkhead, Flareless Tube, Internal Thread on Run
- AS-21912 - Tee, Flareless Tube With Bulkhead on Run
- AS-21913 - Plug, Flareless Tube
- AS-21914 - Cap, Pressure Seal, Flareless Tube Fitting
- AS-21915 - Adapter, Straight, Tube to Boss
- AS-21916 - Reducer, External Thread, Flareless Tube
- AS-21921 - Nut, Sleeve Coupling, Flareless
- AS-21922 - Sleeve, Coupling, Flareless (STABILIZED May 2017)
- AS-21923 - Adapter, Flareless Tube, Bulkhead and Universal To Flared Tube
- AS-21924 - Union, Flareless Tube, Bulkhead and Universal
- AS-21925 - Elbow, 90° Universal, Flareless Tube, High Profile
- AS-21926 - Elbow, 90° Universal, Flareless Tube, Low Profile
- AS-21935 - Fitting End, Bolt Cluster Fitting, Double Port, Through, Flareless
- AS-21936 - Contour and Mounting End, Cluster Fitting Body, Semifinished,Design Standard
- AS-21937 - Nut, Cluster Fitting, Retainer
- AS-21938 - Bolt, Cluster Fitting, Single Port, Flareless
- AS-21939 - Bolt, Cluster Fitting, Single Port Through, Flareless
- AS-21940 - Bolt, Cluster Fitting, Double Port Flareless
- AS-21941 - Bolt, Cluster Fitting, Double Port Through, Flareless
- AS-21942 - Body, Cluster Fitting, One Way, Flareless
- AS-21943 - Body, Cluster Fitting, Two Way 90°, Flareless
- AS-21944 - Bolt, Cluster Fitting, Two Way, 180°, Flareless
- AS-21945 - Body, Cluster Fitting, Three-Way Flareless
- AS-24333 - Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect, Flared Fitting to Internal Thread Boss (STABILIZED Apr 2017)
- AS-24334 - Coupling Assembly, Hydraulic, Self-Sealing, Flareless Fitting to Internal Thread Boss (STABILIZED Apr 2017)
- AS-24335 - Flange, Bulkhead Mounting, Hydraulic Self-Sealing Coupling
- AS-24405 - Adapter, Flareless Tube To Flared Tube Precision Type
- AS-24651 - Elbow, Tube - 90 Degree, Bulkhead, Flareless Tube Universalto Flared Tube
- AS-24652 - Elbow, Tube - 90 Degree, Bulkhead, Flared Tube, Universal Toflareless Tube
- AS-24654 - Elbow, Tube - 45 Degree, Bulkhead, Flareless Tube Universalto Flared Tube
- AS-25427 - Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect
- AS-3073 - Gasket - 37 Deg. Flared Tube Fitting, Copper, AMS 4500
- AS-3075 - GASKET - 37° FLARED TUBE FITTING, NICKEL, AMS5553 (STABILIZED Dec 2014)
- AS-3078 - Fitting, Insert, Fluid Connection, Ms33649 Boss to Ring Locked Boss
- AS-3226 - Fitting, Tee, Bulkhead on Run, Flared Corrosion and Heat Resistant Steel (Uns S34700)
- AS-3282 - GASKET - 37° FLARED TUBE FITTING, NICKEL, AMS5553 (STABILIZED Oct 2014)
- AS-3293 - GASKET - 37° FLARED TUBE FITTING, COPPER, AMS4500 (STABILIZED Oct 2014)
- AS-33514 - Fitting End, Standard Dimensions for Flareless Tube Connection & Gasket Seal
- AS-33515 - Fitting End, Standard Dimensions for Bulkhead Flareless Tube Connections
- AS-33566 - Fittings, Installation of Flareless Tube, Straight-Threaded Connectors
- AS-33583 - Tubing End Double Flare, Standard Dimensions For
- AS-33649 - Bosses, Fluid Connection, Internal Straight Thread
- AS-3484 - Gasket - 37 Degree Flared Tube Fitting, Nickel, AMS 5553
- AS-3490 - Stud-Stepped, 1.5 Dia Engagement, .375-16 UNJC-3a Mod X .3125-24 UNJF-3a (Uns S66286)
- AS-35411 - Fittings, Lubrication
- AS-38386/1 - Connector, Air Duct Hose, Ground Cooling, Male
- AS-38386/2 - Connector, Air Duct Hose, Ground Cooling, Female
- AS-38386/4 - Catch Assembly, Air Duct Hose, Ground Cooling
- AS-38404 - Couplings, Hose, Reattachable Screw-On
- AS-4099 - Adapter, Assembly - Port Connection, Ring Locked to Flareless Tube End
- AS-4135 - Tee, Bulkhead on Side, Standard and Reducer, Reduced Body, Flareless
- AS-4200 - Fitting Assembly, Adapter Ring Locked Port Connection To Beam Seal Fitting 8000 Psi
- AS-4201 - Port - Ring Locked Fluid Connection Type, 8000 Psi, Design Standard
- AS-4203 - Fitting, Beam Seal, Female Tube End, Internal Swage, 4000 Psi, Hydraulic
- AS-4207 - Fitting End, External Thread, Beam Seal, Design Standard
- AS-4208 - Fitting End, Bulkhead, External Thread, Beam Seal, Design Standard
- AS-4209 - Fitting End Assembly, Internal Thread, Retained Nut, Beam Seal, Design Standard
- AS-4210 - Fitting, Tee, Beam Seal
- AS-4211 - Fitting, Cross, Beam Seal
- AS-4212 - Fitting, Union, Reducer, Beam Seal
- AS-4213 - Fitting, Plug, Beam Seal, Hydraulic
- AS-4214 - Fitting, Cap Assembly, Beam Seal, Hydraulic
- AS-4215 - Fitting, Adapter, Beam Seal, External Thread, External Swagetube End, Hydraulic, 3000 Psi
- AS-4216 - Fitting, Beam Seal, Male Bulkhead Tube End, Internal Swage,4000 Psi, Hydraulic
- AS-4217 - Fitting, Adapter, Beam Seal, Bulkhead, External Swage Tube End, Hydraulic, 3000 Psi
- AS-4218 - Fitting, Elbow, 45 Degrees, Beam Seal, External Thread, External Swage Tube End, Hydraulic
- AS-4219 - Fitting, Elbow, 45 Degrees, Beam Seal, Bulkhead, External Swage Tube End, Hydraulic, 3000
- AS-4220 - Fitting, Elbow, 45°, Beam Seal Bulkhead
- AS-4221 - Fitting, Elbow, 90 Degrees, Beam Seal Bulkhead
- AS-4222 - Fitting, Union, Beam Seal
- AS-4223 - Fitting, Union, Bulkhead Beam Seal
- AS-4224 - Fitting Assembly, Tee, Beam Seal, Retained Nut on Side
- AS-4225 - Fitting, Elbow, 90 Degrees, Beam Seal, External Thread, External Swage Tube End, Hydraulic
- AS-4226 - Fitting, Elbow, 90 Degrees, Beam Seal, Bulkhead, External Swage Tube End, Hydraulic, 3000
- AS-4229 - Fitting, Adapter, Bulkhead, External Thread, Beam Seal To Integral Weld Ring
- AS-4230 - Fitting, Elbow, 45 Degrees, External Thread, Beam Seal To Integral Weld Ring
- AS-4231 - Fitting, Elbow, 45 Degrees, Bulkhead, External Thread, Beamseal To Integral Weld Ring
- AS-4232 - Fitting, Elbow, 90 Degrees, External Thread, Beam Seal To Integral Weld Ring
- AS-4233 - Fitting, Elbow, 90 Degrees, Bulkhead, External Thread, Beamseal To Integral Weld Ring
- AS-4234 - Fitting, Adapter, Beam Seal, Swivel Nut, External Swage Tubeend, Hydraulic, 3000 Psi
- AS-4282 - Cap Assembly, Protective Closure, Beam Seal Fitting, Low Pressure
- AS-4300 - Fitting Assembly, Cap, Flareless, Protective Closure, Low Pressure
- AS-4301 - Fitting, Adapter, Conical End To Flared Tube Reducer for Seal Ring
- AS-4302 - Tee Assembly, Flared Tube, Retained Nut on Run, for Seal Ring
- AS-4303 - Elbow Assembly 90 Degrees, Flared Tube To Adjustable End, for Seal Ring
- AS-4304 - Tee Assembly, Flared Tube, Retained Nut on Side, for Seal Ring
- AS-4305 - Tee Assembly, Flared Tube, Adjustable End on Run, for Seal Ring
- AS-4306 - Tee Assembly, Flared Tube, Adjustable End on Side, for Sealring
- AS-4307 - Fitting, Flared Tube, External Straight Thread for Seal Ring
- AS-4308 - Fitting, Bushing-Screw Thread Expander for Seal Ring
- AS-4309 - Fitting, Nipple, Flared Tube to Pipe Thread, For Seal Ring
- AS-4310 - Tee, Flared Tube, Internal Thread on Run, for Seal Ring
- AS-4311 - Tee, Flared Tube, Internal Thread on Side, for Seal Ring
- AS-4312 - Tee, Flared Tube With Pipe Thread on Run, for Seal Ring
- AS-4313 - Tee, Flared Tube With Pipe Thread on Side, for Seal Ring
- AS-4314 - Elbow Assembly 45 Degrees, Flared Tube To Adjustable End, for Seal Ring
- AS-4315 - Elbow Assembly 90 Degrees, Flared Tube To Retained Nut, Forseal Ring
- AS-4316 - Elbow Assembly 45 Degrees, Flared Tube To Retained Nut, Forseal Ring
- AS-4317 - Fitting, Reducer, Adapter, Flared Tube To Boss for Seal Ring
- AS-4318 - Fitting, Adapter, Flared Tube, .375 Bulkhead to Boss, for Seal Ring
- AS-4319 - Fitting, Expander, Adapter, Flared Tube To Boss for Seal Ring
- AS-4320 - Fitting End, Straight Thread, Standard Dimensions for, Design Standard
- AS-4321 - Fitting End, Internal Flare, Single Angle, Standard Dimensions for, Design Standard
- AS-4322 - Fitting End, Adjustable, Standard Dimensions for, Design Standard
- AS-4323 - Nut, Retained, for Flared Tube Fittings
- AS-4324 - Washer, Flared Tube Fitting Adjustable End, Design Standard
- AS-4325 - Fitting End, Conical Design Standard
- AS-4326 - Nut, Coupling
- AS-4327 - Sleeve, Flared Tube Fitting
- AS-4328 - Fitting, Union, Reducer, Bulkhead, Flared Tube, for Seal Ring
- AS-4329 - Cap Assembly, Pressure Seal, Flared Tube Fitting
- AS-4330 - Tubing, Flared, Standard Dimensions for, Design Standard
- AS-4341 - Wire, Retaining for Retained Nut
- AS-4346 - Union Assembly, Adjustable End
- AS-4347 - Union Assembly, Double Retained Nut
- AS-4348 - Adapter Assembly, Retained Nut to Boss
- AS-4349 - Coupling, Tube
- AS-4350 - Plug, Hex Head
- AS-4375 - Fitting End, Flareless, Design Standard
- AS-4377 - Fitting End, Bulkhead, Flareless, Design Standard
- AS-4383 - Fitting Assembly, Reducer Ring Locked Port Connection to Beam Seal 5000 Psi
- AS-4395 - Fitting End, Flared, Tube Connection, Design Standard
- AS-4396 - Fitting End, Bulkhead, Flared Tube Connection, Design Standard
- AS-4405 - Fitting Assembly, Adapter, Reducer & Nonreducer, Internal Flare To Flared Tube
- AS-4406 - Fitting Assembly, Union, Reducer & Nonreducer, Internal Flare
- AS-4407 - Fitting Assembly, Elbow 90 Degrees, Reducer & Nonreducer, Internal Flare To Flared Tube
- AS-4408 - Fitting Assembly, Elbow 90 Degree, Reducer and Nonreducer, Internal Flare
- AS-4409 - Fitting Assembly, Elbow 45 Degrees, Reducer and Nonreducer, Internal Flare to Flared Tube
- AS-4410 - Fitting Assembly, Tee, Reducer & Nonreducer, Internal Flareon Run, To Flared Tube
- AS-4411 - Fitting Assembly, Tee, Reducer & Nonreducer, Internal Flareon Side To Flared Tube
- AS-4541 - Elbow, 45 Degrees, Beam Seal, Male 4000 Psi, Hydraulic
- AS-4542 - Elbow, 90 Degrees, Beam Seal, Male 4000 Psi, Hydraulic
- AS-4658 - Fitting End, External Thread, Short Flareless Design Standard
- AS-4659 - Fitting End, Bulkhead, External Thread, Short Flareless, Design Standard
- AS-4660 - Nut, Short Flareless
- AS-4661 - Fitting Assembly, Cap, Short Flareless
- AS-4662 - Fitting, Plug, Short Flareless
- AS-4663 - Fitting, Union, Short Flareless
- AS-4664 - Fitting, Union, Bulkhead, Short Flareless
- AS-4665 - Fitting, Adapter, Union and Reducer, Short Flareless to Boss
- AS-4666 - Fitting, Elbow, 45 Degrees, Bulkhead, Short Flareless
- AS-4668 - Fitting, Elbow, 90 Deg, Short Flareless
- AS-4669 - Fitting, Elbow, 90 Degrees, Bulkhead, Short Flareless
- AS-4670 - Elbow Assembly, 90 Degrees, Retainer Nut, Short Flareless
- AS-4671 - Fitting, Tee, Short Flareless
- AS-4672 - Fitting, Tee, Bulkhead on Run, Short Flareless
- AS-4673 - Fitting, Tee, Bulkhead on Side, Short Flareless
- AS-4674 - Tee Assembly, Retained Nut on Run, Short Flareless
- AS-4675 - Tee Assembly, Retained Nut on Side, Short Flareless
- AS-4676 - Fitting, Tee, Bulkhead and Boss on Run, Short Flareless
- AS-4677 - Fitting, Tee, Bulkhead on Run, Boss on Side, Short Flareless
- AS-4678 - Nut, Bulkhead, Short Flareless
- AS-4679 - Washer, Flat, Short Flareless
- AS-4680 - Fitting, Union, Reducer, Short Flareless and Flareless to Boss
- AS-4681 - Fitting, Union, Reducer/Expander Bulkhead, Flareless and Short Flareless
- AS-4682 - Fitting, Elbow, 45 Deg, Reducer, Flareless and Short Flareless
- AS-4683 - Fitting, Elbow, 45 Deg, Reducer and Non-Reducer, Bulkhead, Flareless and Short Flareless
- AS-4684 - Fitting Assembly, Elbow, 45 Deg, Flareless and Short Flareless, Reducer, Retained Nut
- AS-4685 - Fitting, Elbow, 90 Deg, Reducer, Flareless and Short Flareless
- AS-4687 - Fitting Assembly, Elbow, 90 Deg, Flareless and Short Flareless, Reducer, Retained Nut
- AS-4688 - Fitting, Tee, Reducer, Flareless and Short Flareless
- AS-4691 - Fitting Assembly, Tee, Flareless and Short Flareless, Reducer, Retained Nut on Run
- AS-4692 - Fitting Assembly, Tee, Flareless & Short Flareless, Reducer,Retained Nut on Side
- AS-4693 - Union, Tube End, External Thread to Weld, Short Flareless
- AS-4694 - Fitting Assembly, Cap, Hollow End, Acorn, Short Flareless
- AS-4695 - Sleeve, Tube End, Acorn to Weld, Short Flareless
- AS-4696 - Fitting, Sleeve, Flareless, Nonreducer & Reducer, Short Acorn To Weld Tube End
- AS-4697 - Fitting End, Integral Centered Weld Lip, Design Standard
- AS-4701 - Wire, Retainer, Tube Coupling Nut, Short Flareless
- AS-4702 - Nut, Retained, Short Flareless
- AS-4703 - Fitting End, Acorn, Short Flareless, Design Standard
- AS-4734 - Male Ferrule, Threadless - Flexible, Fixed Cavity, Self-Bonding, Butt Welded
- AS-4735 - Female Ferrule, Threadless - Flexible, Fixed Cavity, Self-Bonding, Swaged
- AS-4736 - Female Ferrule, Threadless - Flexible, Fixed Cavity, Self-Bonding Welded
- AS-4793 - Fitting, Beam Seal, Male Tube End, Internal Swage, 4000 Psi,Hydraulic
- AS-4807 - Fitting Assembly, Elbow, 90°, Beam Seal, Retained Nut
- AS-4808 - Fitting Assembly, Elbow, 45°, Beam Seal, Retained Nut
- AS-4809 - Fitting Assembly, Tee, Beam Seal, Retained Nut on Run
- AS-4824 - Gasket, Fitting End, 37 Degrees Flared
- AS-4825 - Gasket, Fitting End, 24 Degree Cone
- AS-4854 - Fitting, Elbow, 90 Deg, Pipe, Internal and External Thread
- AS-4855 - Fitting, Elbow, 45 Deg, Pipe, Internal and External Thread
- AS-4856 - Fitting, Elbow, 90 Deg, Pipe, Internal Thread
- AS-4857 - Fitting, Tee, Pipe, Internal Thread
- AS-4858 - Fitting, Cross, Pipe, Internal Thread
- AS-4859 - Fitting, Coupling, Pipe, Internal Thread
- AS-4860 - Fitting, Nipple, Pipe, External Thread
- AS-4861 - Fitting, Bushing, Pipe, Internal and External Thread
- AS-4862 - Fitting, Plug, Pipe, External Thread, Hex Head
- AS-4863 - Plug, Pipe, External Thread
- AS-4864 - Fitting, Plug, Pipe, External Thread, Countersunk Hex Head
- AS-4971 - Fitting, Elbow, 90 Degrees, Weld Ring
- AS-4972 - Fitting, Tee, Weld Ring
- AS-4973 - Ring, Weld
- AS-5002 - Fitting, Elbow, 90 Degrees, Beam Seal
- AS-5003 - Fitting, Tee, Beam Seal, Bulkhead on Run
- AS-5004 - Fitting, Tee, Beam Seal, Bulkhead on Side
- AS-5008 - Fitting, Union, External Swage, Hydraulic
- AS-5009 - Fitting, Elbow, 90 Degrees, External Swage, Hydraulic
- AS-5010 - Fitting, Tee, External Swage, Hydraulic
- AS-5011 - Fitting, Cross, External Swage, Hydraulic
- AS-5012 - Fitting, Sleeve, Straight, Flared, External Swage, Hydraulic
- AS-5013 - Fitting, Adapter, Straight Flareless, External Swage, Hydraulic
- AS-5014 - Fitting, Sleeve, Straight, Flareless, External Swage, Hydraulic
- AS-5018 - Washer, Flat, Beam Seal Fitting
- AS-5019 - Nut, Bulkhead, Beam Seal Fitting
- AS-5103 - Fitting Assembly, Plug, Ring Locked Port Connection, 4000 Psi and 5000 Psi
- AS-5131 - Tube End - Beaded, Design Standard
- AS-5132 - Fitting End - Hose Connection, Design Standard
- AS-5160 - Fitting, Bolt, Flared
- AS-5161 - Fitting, Bolt, Fluid Passage
- AS-5162 - Fitting, Connector, Multiple Fluid Pressure Line, 90 Degrees
- AS-5163 - Fitting, Connector, Multiple Fluid Pressure Line, 75 Degrees
- AS-5164 - Fitting, Connector, Multiple Fluid Pressure Line, 45 Degrees
- AS-5165 - Fitting, Connector, Multiple Fluid Pressure Line, Tee (STABILIZED May 2017)
- AS-5166 - FITTING, TEE, AIR PRESSURE GAUGE (STABILIZED May 2017)
- AS-5167 - Fitting, Adapter, Flared, Air Pressure Gage
- AS-5168 - Fitting, Plug, Tube End, Flared
- AS-5171 - Washer, Flat, Fitting, Flared and Flareless
- AS-5172 - Fitting, Adapter, Port, Reducer
- AS-5173 - Fitting, Bushing, Port, Reducer
- AS-5174 - Fitting, Union & Reducer, Flared
- AS-5175 - Nut, Coupling, Flared
- AS-5176 - Fitting, Sleeve, Flared
- AS-5178 - Nut, Fitting, Bulkhead
- AS-5179 - Nut, Fitting, Port
- AS-5180 - Fitting, Adapter, Bulkhead, Flared to Hose
- AS-5181 - Fitting, Elbow, 90 Degrees, Bulkhead, Flared To Hose
- AS-5182 - Fitting, Elbow, 45 Deg, Bulkhead, Flared to Hose
- AS-5183 - Fitting, Adapter, Hose to Straight Pipe
- AS-5184 - Fitting, Adapter, Flared to Hose
- AS-5185 - Fitting, Elbow, 90 Degrees, Pipe To Hose
- AS-5186 - Fitting, Elbow, 45 Degrees, Pipe To Hose
- AS-5187 - Fitting, Elbow, 45 Degrees, Bulkhead, Hose
- AS-5188 - Fitting, Elbow, 90 Deg, Bulkhead, Hose
- AS-5189 - Fitting, Adapter, Hose
- AS-5190 - Fitting, Elbow, 90 Degrees, Internal Straight Thread Port
- AS-5191 - Fitting, Elbow, 45 Degrees, Internal Straight Thread Port
- AS-5192 - Fitting, Tee, Internal Straight Thread Port
- AS-5193 - Fitting, Cross, Internal Straight Thread Port
- AS-5194 - Fitting, Adapter, Straight Pipe to Flared
- AS-5195 - Fitting, Elbow, 90 Degrees, Flared To Pipe
- AS-5196 - Fitting, Elbow, 45 Degrees, Flared To Pipe
- AS-5197 - Fitting, Tee, Flared to Pipe on Side
- AS-5198 - Fitting, Tee, Flared to Pipe on Run
- AS-5200 - Port Or Fitting End, Internal Taper Pipe Thread, Design Standard
- AS-5201 - Fitting End, External Taper Pipe Thread, Design Standard
- AS-5202 - Port Or Fitting End, Internal Straight Thread, Design Standard
- AS-5203 - Tube End, Double Flare, Design Standard
- AS-5205 - Nut, Fitting, Engine, Flared
- AS-5206 - Nut, Flared, Long
- AS-5227 - Flange, Straight Thread Port, Weld
- AS-5229 - Port, Internal Straight Thread, Air Connection, Design Standard
- AS-5230 - Fitting, Union and Reducer, Flareless
- AS-5231 - Fitting, Plug, Tube End, Flareless
- AS-5232 - Fitting, Adapter, Reducer, Port To Flareless
- AS-5233 - Fitting Assembly, Cap, Flareless
- AS-5235 - FITTING, SLEEVE, COUPLING, FLARELESS (STABILIZED Jun 2017)
- AS-5238 - Fitting, Adapter, Flareless To Flared
- AS-5239 - Fitting, Adapter, Bulkhead, Flareless To Flared
- AS-5240 - Fitting, Elbow, 90 Degrees, Bulkhead, Flareless To Flared
- AS-5241 - Fitting, Elbow, 90 Degrees, Bulkhead, Flared To Flareless
- AS-5242 - FITTING, ELBOW, 45 Deg, BULKHEAD, FLARELESS TO FLARED
- AS-5266 - Fitting, Adapter, Straight, Flared, External Swage, Hydraulic
- AS-5267 - Fitting, Adapter, Straight, Flareless, External Swage, Hydraulic
- AS-5272 - Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification
- AS-5309 - Fitting End, Spherical, 37 Degrees, Flared Tube Connection,Design Standard
- AS-5310 - Fitting End, Bulkhead, Spherical, 37 Degrees Flared Tube Connection, Design Standard
- AS-5356 - Coupling, Fuel Line, Flexible, 125 psi General Specification For (STABILIZED May 2017)
- AS-5368 - Fitting Assembly, Adapter - Ring Locked Port Connection to Flared Tube End, 3000 psi
- AS-5406 - Fitting, Union, Tube, .375 Bulkhead
- AS-5449 - Fitting End, Weld Ring, Short Tapered, Design Standard
- AS-5865 - Fitting Reducer Assembly, Ring Locked, Adapter, Flareless to Port, Extra Fine Threads, 5080 Psi
- AS-5986 - Fitting Assembly, Adapter Ring Locked Port Connection To Beam Seal 4000 Psi and 5000 Psi
- AS-603 - Impulse Testing of Hydraulic Hose, Tubing, & Fitting Assemblies
- AS-6075 - Fitting, Bolt, Flared, 37 Degrees Spherical
- AS-6092 - Fitting, 37 Degrees Spherical Flared, Connector, Multiple Fluid Pressure Line, 75 Degrees
- AS-6093 - Fitting, 37 Degrees Spherical Flared, Connector, Multiple Fluid Pressure Line, 90 Degrees
- AS-6094 - Fitting, 37 Degrees Spherical Flared, Connector, Multiple Fluid Pressure Line, 45 Degrees
- AS-6095 - Fitting, 37 Degrees Spherical Flared, Connector, Multiple Fluid Pressure Line, Tee
- AS-6098 - Fitting, Tee, Standard and Reducer, Bulkhead On Run, Internal On Side, Flared, 37 Degrees Spherical
- AS-6099 - Fitting, Elbow, 90 Degrees, Standard and Reducer, Flared, 37 Degrees Spherical
- AS-6102 - Fitting, Tee, Standard and Reducer, Bulkhead On Side, Flared, 37 Degree Spherical
- AS-6103 - Fitting, Cross, Standard and Reducer, 37 Degrees Spherical, Flared
- AS-6104 - Fitting, Elbow 45 degrees, Standard and Reducer, 37 degrees Spherical, Flared
- AS-6105 - Fitting, Tee, Standard and Reducer, 37 Degrees Spherical, Flared
- AS-6213 - Fitting, Adapter, Port, Reducer, 37 Degree Spherical, Flared
- AS-71051 - Pipe Threads, Taper, Aeronautical National Form, Symbol ANPT- Design & Inspection Standar
- AS-7365/1 - Pin, Female Coupling
- AS-7365/4 - Coupling, Female, 6 Inch Air Duct
- AS-7365/5 - Coupling, Male, 6 Inch Air Duct
- AS-7365/8 - Band, Female Coupling, 6 Inch Air Duct
- AS-7365/9 - Band, Male Coupling, 6 Inch Air Duct
- AS-756 - Fitting End Assembly, Universal, Design Standard
- AS-85421 - Fittings, Tube, Fluid Systems, Separable, Beam Seal, 3000/4000 psi, General Specification For
- AS-85421/1 - Fitting End, Standard Dimensions for Dynamic Beam Seal, Male
- AS-85421/13 - Fitting, Elbow, 90 Degrees, Beam Seal, 3000/4000 Psi, Bulkhead, Male Ends
- AS-85421/14 - Fitting, Elbow, 90 Degrees, Beam Seal, 3000/4000 Psi, Male To Female
- AS-85421/16 - Fitting, Tee, Beam Seal, 3000/4000 Psi, Bulkhead on Run, Male Ends
- AS-85421/17 - Fitting, Tee, Beam Seal, 3000/4000 Psi, Bulkhead on Branch, Male Ends
- AS-85421/2 - Fitting End, Standard Dimensions for, Bulkhead, Dynamic Beam Seal, Male
- AS-85421/3 - Fitting, Tee, Reducer, Beam Seal, 3000/4000 psi, 3 Male Ends
- AS-85421/4 - Fitting, Tee, Reducer and Non-Reducer, Beam Seal, 3000/4000 Psi, Male on Run, Swivel Nut on Branch
- AS-85421/6 - Fitting, Cross, Beam Seal, 3000/4000 psi, Male Ends
- AS-85421/7 - Fitting Assembly, Cross, Beam Seal, 3000/4000 Psi, 4 Female Ends
- AS-85421/8 - Fitting, Cross, Reducer, Beam Seal 3000/4000 Psi, 4 Male Ends
- AS-85421/9 - Fitting Assembly, Cross, Reducer Beam Seal, 3000/4000 Psi, 4 Female Ends
- AS-85720 - Fittings, Tube, Fluid Systems, Separable, High Pressure, Dynamic Beam Seal, 5000/8000
- AS-85720/1 - Fittings, Tube, Fluid Systems, Separable, High Pressure, Dynamic Beam Seal, Design Standar
- AS-893 - Fitting, Tee, Standard and Reducer, Flareless Tube to Pipe on Side, External Thread (STABILIZED Jun 2017)
- AS-894 - Fitting, Tee, Standard & Reducer, Flareless Tube To Pipe Onrun, External Thread
- AS-895 - Fitting, Elbow, 45 Degrees, Standard & Reducer, Flareless Tube To Pipe, External Thread
- AS-896 - Fitting, Nipple, Reducer, Flareless Tube To Pipe, External Thread
- AS-897 - Fitting, Elbow, 90 Degrees, Standard & Reducer, Flareless Tube To Pipe, External Thread
- AS-930 - Fitting End, Straight Thread, Boss Connection, Design Standard
- AS-931 - Fitting, Adapter, Union, Flareless to Boss
- AS-932 - Fitting, Adapter, Reducer/Expander, Flareless to Boss
- AS-933 - Fitting, Adapter, Union, Flared to Boss
- AS-934 - Fitting, Adapter, Reducer/Expander, Flared to Boss
- AS-95 - Fitting Assembly, Cross, Reducer and Nonreducer, Internal Flare on One End, to Flared Tube
- ASME-B29.100 - Double-Pitch Roller Chains, Attachments, and Sprockets
- CISPI-310 - Specification for Coupling for Use in Connection With Hubless Cast Iron Soil Pipe & Fi
- DESC-DWG-19002 - Elbow, Flared Tube, Flanged, Swivel, 90 Degree Product Verification
- DSCC-07007 - Fitting, Female, Swivel, 90 Degrees Nipple, Adapter, Hose To Tube, SAE J1453 Type, Pne
- DSCC-07008 - Fitting, Female, 37 Degrees Flared Swivel, 67 Degrees Nipple, Adapter, Hose To Tube, S
- DSCC-08001 - Hose Assembly, Internal Support Coil, for Vacuum & Suction Hoses
- DSCC-08008 - Strainer Element
- DSCC-10003 - Fitting, Hexagon Pipe Nipple, 4-Inch Length
- GGG-C-2794 - Cups, Oil, Lubricating, and Oilers, Self-Feeding, General Specification for
- GGG-C-2794/1 - Cups, Oil, Lubricating and Oilers, Self Feeding, Type A Screw Cap
- GGG-C-2794/2 - Cups, Oil, Lubricating and Oilers, Self Feeding, Type B Spring Cap
- GGG-C-2794/3 - Cups, Oil, Lubricating and Oilers, Self Feeding, Cylindrical, Slotted Cap
- GGG-C-2794/4 - Cups, Oil, Lubricating and Oilers, Self Feeding, Hinged Cap
- GGG-C-2794/5 - Cups, Oil, Lubricating and Oilers, Self Feeding, with Sight Feed
- GGG-C-2794/6 - Cups, Oil, Lubricating and Oilers, Self Feeding, Ball Valve, Straight or Shoulder
- GGG-C-2794/7 - Cups, Oil, Lubricating and Oilers, Self Feeding, Small Elbow
- L-F-1546 - Fittings, Plastic Pipe & Tubing
- L-P-1221 - Pipe & Fittings, Plastic, Rigid (Styrene-Rubber, Drain)
- MA-2012 - Port, Internal, Straight Thread, Fitting, Connection, Designstandard, Metric
- MA-2014 - Fitting End, Acorn Flareless Design Standard, Metric
- MA-2023 - Alternate Dimensions, Center Body Section, Shape Fluid Fitting, Design Standard, Metric
- MA-2026 - Fitting, Elbow, 90 Degrees, Thin Wall, Flareless, Metric
- MA-2027 - Fitting, Tee, Thin Wall, Flareless, Metric
- MA-2028 - Fitting, Cross, Thin Wall, Flareless, Metric
- MA-2029 - Fitting, Elbow, 45 Degrees, Thin Wall, Bulkhead, Flareless,Metric
- MA-2030 - Fitting, Elbow, 90 Degrees, Thin Wall, Bulkhead, Flareless,Metric
- MA-2031 - Fitting, Tee, Thin Wall, Bulkhead on Run, Flareless, Metric
- MA-2032 - Fitting, Tee, Bulkhead and Boss on Run, Flareless, Metric
- MA-2033 - Fitting, Tee, Flareless, Bulkhead on Run, Boss on Side, Metric
- MA-2034 - Fitting, Tee, Thin Wall, Bulkhead on Side, Flareless, Metric
- MA-2036 - Cap Assembly, Pressure Seal, Flareless Tube, Metric
- MA-2037 - Bushing, Screw Thread Expander, Flareless Tube, Metric
- MA-2040 - Nut, Flareless, Metric
- MA-2042 - Fitting, Adapter, Port Connection to Flareless, Metric
- MA-2046 - Adapter Flareless Metric to Inch
- MA-2047 - Nut, Retained, Flareless, Metric
- MA-2048 - Fitting Assembly, Elbow, 45 Degrees, Thin Wall, Retained Nut, Flareless, Metric
- MA-2049 - Fitting Assembly, Tee, Thin Wall, Retained Nut on Run, Flareless, Metric
- MA-2050 - Fitting Assembly, Elbow, 90 Degrees, Thin Wall, Retained Nut, Flareless, Metric
- MA-2051 - Fitting Assembly, Tee, Thin Wall, Retained Nut on Side, Flareless, Metric
- MA-2052 - Adapter, Flareless, Metric to Inch
- MA-2061 - Fitting End, Welded, Integral Offset Weld, Lip, Design Standard, Metric
- MA-2062 - Ring, Weld, 21,000 kPa, Cres, Metric
- MA-2063 - Tube End, Weld, Design Standard, Metric
- MA-2064 - Fitting, Sleeve, Flareless Acorn To Integral Weld Ring, 21,000 Kpa, Metric
- MA-2065 - Fitting, Adapter, External Thread Flareless To Integral Weldring, 21,000 Kpa, Metric
- MA-2066 - Fitting, Reducer, Integral Weld Ring, 21,000 kPa, Metric
- MA-2069 - Fitting, Elbow 90 Degrees, Integral Weld Ring, 21,000 Kpa, Metric
- MA-2070 - Fitting, Tee, Integral Weld Ring, 21,000 Kpa, Metric
- MA-2071 - Fitting, Cross, Integral Weld Ring, 21,000 Kpa, Metric
- MA-2093 - Fitting End, Dimensions, Fluid Systems Port Connection, Metric
- MA-2095 - Fitting End, 24 Degrees Cone, Design Standard, Metric
- MA-2096 - Fitting End, 24 Degrees Cone, Bulkhead, Design Standard, Metric
- MA-2110 - Port, Ring Locked Design Standard Dimensions For
- MA-2111 - Fitting Assembly, Adapter Ring Locked Port Connection to 8 Deg 30' Beam Seal 28 000 kPa, Metric
- MA-2112 - Adapter, Assembly - Port Connection Ring Locked to 24 Deg Flareless Tube End, Metric
- MA-2113 - Adapter, Assembly - Port Connection Ring Locked to 60 Deg Flareless Tube End, Metric
- MA-2115 - Union, Flareless Tube or Boss
- MA-2116 - Union, Reducer, Flareless Tube or Boss
- MA-2117 - Wire, Retainer, Swivel, Metric
- MA-2118 - Nut, Bulkhead, Fitting, Metric
- MA-2119 - Adapter, Assembly - Port Connection Ring Locked To 60 Degrees Flareless Tube End, Metric
- MA-2157 - Cross, Bulkhead, Flareless Tube
- MA-2158 - Cross, Swivel, Flareless Tube
- MA-2271 - Fitting End, Beam Seal, Slip-on Nut, Design Standard, Metric
- MA-2273 - Fitting End, Beam Seal, External Thread, Design Standard, Metric
- MA-2274 - Fitting End, Beam Seal, Bulkhead, External Thread, Design Standard, Metric
- MA-2276 - Nut, Beam Seal, Slip-On Metric
- MA-2284 - Fitting, Tee, Beam Seal, Metric
- MA-2289 - Fitting, Elbow, 45°, Beam Seal, Metric
- MA-2292 - Fitting, Elbow, 45°, Bulkhead Beam Seal, Metric
- MA-2294 - Fitting, Elbow, 90°, Beam Seal, Metric
- MA-2298 - Fitting, Elbow, 90°, Bulkhead Beam Seal, Metric
- MA-2300 - Fitting, Adapter, External Thread Beam Seal To Integral Weldring, Metric
- MA-2301 - Fitting, Adapter, Slip on Nut Beam Seal to Weld, Metric
- MA-2303 - Fitting, Union, Beam Seal, Metric
- MA-2304 - Fitting, Union, Reducer, Beam Seal, Metric
- MA-2305 - Fitting, Union, Bulkhead, Beam Seal, Metric
- MA-2306 - Fitting, Adapter, Bulkhead, External Thread Beam Seal To Integral Weld Ring, Metric
- MA-2307 - Fitting End, Integral Centered Weld Lip, Design Standard, Metric
- MA-4248 - Cap Assembly, Protective Closure, Beam Seal Fitting, Low Pressure, Metric
- MIL-A-11610 - Adapter, Line, Filling, 1-Ton Container, m1
- MIL-A-16726 - Adapter, Pipe, Flanged To Thread (Use ANSI-B16.5, ANSI-B16.24 and WW-N-351)
- MIL-A-16728 - Adapter, Pipe, Brass, Flanged To Threaded (Use MIL-A-16726B)
- MIL-A-16729 - Adapters, Tee, 12 Inch, Black Steel Pipe
- MIL-A-16730 - Adapters, Pipe, Black Steel, Flanged 90 Degree Elbow (Superseded by MIL-F-3268B)
- MIL-A-16731 - Adapters, Reducing, Pipe, Black Steel, Flanged To butt-Welding (Superseded by MIL-F-3268B)
- MIL-A-25676 - Adapter, Pressure Lubricating Oil Servicing, Aircraft (Renumbered MIL-PRF-25676, then replaced by MIL-DTL-25677)
- MIL-A-38726 - Adapter Assembly, Reusable, Flexible Hose, Low Pressure
- MIL-A-5070 - Adapter, Hose To Tube, Pipe and Flange, Reusable, Hydraulic, Fuel and Oil Lines
- MIL-B-16542 - Bronze for Screw Pipe Fitting, Castings (Use QQ-L-225)
- MIL-B-20235 - Bushings, Pipe (for Shipboard Use) (Use WW-P-471)
- MIL-C-10387 - Couplings, Clamp, Pipe; With Bolts and Synthetic-Rubber Gaskets for Grooved-End Pipe (Superseded by A-A-52598)
- MIL-C-11418 - Clamps, Leak Repair, Pipe Coupling: for Use Over Grooved-Type Couplings
- MIL-C-11514 - Clamp, Hose, 3/4-Inch I.D., for 5/16-Inch I.D. OxyacetyleneHOSE
- MIL-C-11569 - Clamps, Hose, Water, Universal 3/8- To 1-Inch and 1- To 3-Inch (Superseded by SAE-J536 or WW-C-440)
- MIL-C-11760 - Clamps, Hose, Pneumatic, for Universal Couplings (Superseded by SAE-J536)
- MIL-C-1213 - Cup, Grease
- MIL-C-12386 - Clamp, Repair, Pipe, With Gasoline-Resistant Gasket, General Specification For
- MIL-C-12386/1 - Clamp, Repair, Pipe; With Gasoline-Resistant Gasket; Type I, Split Application (No Superseding Document)
- MIL-C-12386/2 - Clamp, Repair, Pipe; With Gasoline-Resistant Gasket; Type Ii, Pinhole Application (No Superseding Document)
- MIL-C-1258 - Cups, Oil, Lubricating, and Oilers, Self-Feeding (Superseded by GGG-C-2794)
- MIL-C-19179 - Coupling Assembly, Quick-Disconnect, Fuel (Superseded by MIL-C-24788)
- MIL-C-22263 - Coupling Fuel Line, Flexible, 125 Ps1, General Specification For
- MIL-C-22263/1 - Coupling, Type 1, Rolled Bead Connecting Fluid Line, Flexible, Maximum Envelope & Weight
- MIL-C-22263/2 - Coupling, Type Ii, Swagged Ferrule Connecting Fluid Line, Flexible Max Envelope & Weigh
- MIL-C-23303 - Closure, Hinged (No Superseding Document)
- MIL-C-23465 - Connection, Flexible; Pipe Loops, for Steam To Main and Auxiliary Turbines (Sizes 4 and 6 Inches Ips) (No Superseding Document)
- MIL-C-24237 - Coupling, Quick-Disconnect for Abrasive Blasting Hose
- MIL-C-24356 - Coupling, Segmented, & Split Clamps Reattachable, 2-1/2-, 4-, 6- & 7- Inch, for Refueling-at-Sea Hose
- MIL-C-24516 - Couplings and Adapters, Fire Hose, Quarter Turn (Superseded by WW-C-621)
- MIL-C-24706 - Coupling, Pipe, Heat-Recoverable
- MIL-C-24788 - Coupling Assembly, Semi-Dry-Break Quick-Disconnect, Fuel With or Without Continuity Switch
- MIL-C-25014 - Coupling, Flexible, Fuel Line, 125 Psi
- MIL-C-25427 - Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect
- MIL-C-25531 - Coupling Half, Quick Disconnect, Pneumatic Starter, External, Low Pressure
- MIL-C-25531/1 - Coupling Half, Quick Disconnect, Pneumatic Starter, External, Low Pressure, Direct Release (Superseded by MIL-DTL-25531)
- MIL-C-26516 - Cap, Lubrication Fitting, Protective
- MIL-C-27487 - Coupling Halves, Quick-Disconnect, Cam-Locking Type (Superseded by A-A-59326)
- MIL-C-28522 - Coupling Adapter, Quick Disconnect (Superseded by MIL-C-27487)
- MIL-C-3486 - Couplings and Coupling Halves-Quick Disconnect, Air Hose, Bowes Type (Superseded by A-A-50431)
- MIL-C-38178 - Coupling Assemble, Quick Disconnect, Fuel GRK-12/S32R-2 (Superseded by MIL-C-38479)
- MIL-C-38179 - Coupling Assembly, Quick Disconnect, Fuel GRU-13/E
- MIL-C-38404 - Couplings, Hose, Reattachable Screw-on (Superseded by SAE as-38404)
- MIL-C-38405 - Coupling, Hose, Reattachable Clamp-on (Use MIL-H-26894C)
- MIL-C-4109 - Coupling Halves, Low Pressure, Air Hose, Quick-Disconnect (Superseded by A-A-59439)
- MIL-C-51073 - Coupling Halves, Quick Disconnect
- MIL-C-51234 - Coupling Assembly, Quick Disconnect, Plain and Self-Sealing
- MIL-C-52545 - Coupling, Hose, Reusable, Hydraulic, Oil Suction 2 Bolt Clamp on, General Specification for (No Superseding Document)
- MIL-C-52545/1 - Couplings, Hose, Reusable, Hydraulic Oil Suction, 2 Bolt Clamp on, Straight (No Superseding Document)
- MIL-C-52545/2 - Coupling, Hose, Reusable, Hydraulic Oil Suction, 2 Bolt Clamp on, 45 Deg. Elbow
- MIL-C-52545/3 - Couplings, Hose, Reusable, Hydraulic Oil Suction, 2 Bolt Clamp on, 90 Degrees Elbow (No Superseding Document)
- MIL-C-52705 - Couplings: Hose, Steam
- MIL-C-53071 - Coupling Assemblies, Quick-Disconnect, Sexless Type (Superseded by A-A-59377)
- MIL-C-5502 - Couplings, Aircraft Hydraulic Self-Sealing ()Canceled. Use MIL-C-25427(Asg)()
- MIL-C-62166 - Coupling Assembly, Quick Disconnect Duo-Male Ends With Check Valves (No Superseding Document)
- MIL-C-6985 - Clamp, Hose (Superseded by NAS1925)
- MIL-C-7413 - Coupling, Quick Disconnect, Automatic Shutoff, General Specification for (Superseded by SAE-as7413)
- MIL-C-7942 - Connectors, Hose, Quick-Disconnect, Anti ""G"" Suit
- MIL-C-81337 - Coupling Assembly, Self-Sealing, Quick Disconnect, Hydraulic (Waterbased Hydraulic Fluid) (No Superseding Document)
- MIL-C-83390 - Connector, Hose, Quick Acting, Male, Anti-g Garment
- MIL-C-85061 - Coupling, Fuel Line, Flexible, 125 Psi
- MIL-C-8783 - Clamp, Hose, Flat Band 500 Deg. F
- MIL-D-82036 - Dampner, Pressure Fluid (for Water-Hammer)
- MIL-DTL-1183 - Fittings, Pipe, Cast Bronze, Silver-Brazing, General Specification for
- MIL-DTL-1183/1 - Fittings, Pipe, Cast Bronze, Silver Brazing; Bend, Pipe, Return
- MIL-DTL-1183/10 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Union, Pipe
- MIL-DTL-1183/11 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Union Elbow, Pipe and Union Tee, Pipe
- MIL-DTL-1183/12 - Fittings, Pipe, Cast Bronze, Silver-Brazing; with Flanged Ends(S)
- MIL-DTL-1183/2 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Cap, Pipe
- MIL-DTL-1183/3 - Fittings, Pipe, Cast Bronze, Silver Brazing; Coupling, Pipe
- MIL-DTL-1183/4 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Cross, Pipe
- MIL-DTL-1183/5 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Elbow, Pipe
- MIL-DTL-1183/6 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Y-Branch, Pipe
- MIL-DTL-1183/7 - Fittings, Pipe, Cast Bronze,Silver-Brazing; Plug, Pipe
- MIL-DTL-1183/8 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Reducing Coupling, Bushing, and Adapter Pipe
- MIL-DTL-1183/9 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Tee, Pipe
- MIL-DTL-1213 - Cups, Grease
- MIL-DTL-17813 - Expansion Joints, Pipe, Metallic Bellows, General Specification for
- MIL-DTL-17813/1 - Expansion Joints, Pipe, Metallic, Single Bellows, Corrugated, Unreinforced
- MIL-DTL-17813/2 - Expansion Joints, Pipe, Metallic, Single Bellows, Corrugated, Reinforced
- MIL-DTL-17813/3 - Expansion Joints, Pipe, Metallic, Double Bellows, Corrugated, Unreinforced
- MIL-DTL-17813/4 - Expansion Joints, Pipe, Metallic, Corrugated Bellows, Externally Pressurized
- MIL-DTL-17813/5 - Expansion Joints, Pipe, Metallic, Single Bellows, Fabricated
- MIL-DTL-17813/6 - Expansion Joints, Pipe, Metallic, Pressure Balance
- MIL-DTL-17813/7 - Expansion Joints, Pipe, Metallic, Universal
- MIL-DTL-17813/8 - Expansion Joints, Pipe, Metallic, Hinged
- MIL-DTL-17813/9 - Expansion Joints, Pipe, Metallic, Gimbal
- MIL-DTL-17849 - Strainers, Sediment, Pipeline, Duplex (with and without Magnet)
- MIL-DTL-18182 - Union, Pipe, Forged Steel, Threaded, Water-Oil-Gas (2,000, 3,000 and 6,000 Lb/IN2)
- MIL-DTL-18866 - Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for
- MIL-DTL-2118 - Trap, Steam, Angle, Thermostatic
- MIL-DTL-21427 - Strainer, Assemblies, Main Steam, High Pressure (Sizes 4 Inches and Above)
- MIL-DTL-22263 - Coupling Fuel Line, Flexible, 125 PSI General Specification for
- MIL-DTL-23467 - Fitting and Flanges, Wrought Seamless, Butt and Socket Welding, Austenitic Corrosion-Resistant Steel (MIL-C-23467 renumbered and designated "Classified" - Controlled Distribution - See your contracting officer.
- MIL-DTL-23508 - Fittings and Flanges, Wrought, Seamless, Butt and Socket Welding, Nickel-Chromium-Iron Alloy (UNS N06600) - Classified, See Your Contracting Officer
- MIL-DTL-23509 - Fittings and Flanges, Wrought, Seamless Butt and Socket Welding, Nickel-Copper Alloy (UNS N04400)
- MIL-DTL-24202 - Fittings, Butt-Welding, Seamless or Welded, 70-30 Copper-Nickel Alloy, 700 PSI, 200 Degrees Fahrenheit
- MIL-DTL-24227 - Fittings and Flanges, Cast Bronze, Silver-Brazing, Suitable for Ultrasonic Inspection
- MIL-DTL-24339 - Fittings and Flanges, Wrought, Seamless, Butt and Socket Welding Carbon Steel - Classified - See your contracting officer
- MIL-DTL-24342 - Fitting and Flanges, Wrought Seamless, Butt and Socket Welding, 70-30 Copper-Nickel Alloy (UNS C71500) - Classified - See your contracting officer
- MIL-DTL-24356 - Couplings and Split Clamps, 2-1/2-, 4-, 6-, and 7-Inch Segmented, Reattachable, for Refueling-At-Sea Hose
- MIL-DTL-24788 - Coupling Assembly, Semi-Dry-Break, Quick-Disconnect Fuel, with or without Continuity Switch
- MIL-DTL-25427 - Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect, General Specification for
- MIL-DTL-25427/1 - Coupling Assembly, Aircraft Hydraulic, Self-Sealing, Quick Disconnect, Ground Support
- MIL-DTL-25427/2 - Coupling Half, Aircraft Mounting, Hydraulic, Self-Sealing, Quick Disconnect
- MIL-DTL-25427/3 - Coupling Half, Hose Attachment, Hydraulic, Self-Sealing, Ground Support, Quick Disconnect, Type I and Type II
- MIL-DTL-25427/4 - Coupling Cap, Aircraft Hydraulic, Self-Sealing, Ground Support, Quick Disconnect
- MIL-DTL-25427/5 - Coupling Plug, Hose Attachment, Hydraulic, Self-Sealing, Ground Support, Quick Disconnect
- MIL-DTL-25427/6 - Coupling Nut, Aircraft Hydraulic, Self-Sealing, Ground Support, Quick Disconnect, Type I and Type II
- MIL-DTL-25427/7 - Coupling Flange, Aircraft Mounting, Hydraulic, Self-Sealing
- MIL-DTL-25531 - Coupling Half, Quick Disconnect, Pneumatic Starter, External, Low Pressure
- MIL-DTL-25579/1 - Hose Assembly Length Measurement for NAS 1760 and MS8000 Series Seal, (Globe Seal, or Radius Seal) to Flareless Fitting End Design
- MIL-DTL-25677 - Adapter, Cap, and Nozzle, Pressure Lubricating Oil Servicing, Aircraft, General Specification for
- MIL-DTL-25677/1 - Adapter, Pressure Lubricating Oil Servicing, Aircraft
- MIL-DTL-25677/2 - Cap, Lubricating Fitting, Protective, Pressure Servicing Adapter
- MIL-DTL-25677/3 - Nozzle, Pressure Lubricating Oil Servicing, Locking
- MIL-DTL-25677/4 - Car, Pressure, Lubricating Fitting, Protective, Pressure Servicing Adapter
- MIL-DTL-26516 - Cap, Lubrication Fitting, Protective General Specification for
- MIL-DTL-27272 - Fittings, Polytrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for
- MIL-DTL-2953 - Strainers, Steam (Sizes 3 Inches and Below)
- MIL-DTL-32273/11 - Fitting, Adapter, Tee, Hydraulic and Pneumatic, NPTF Male on Branch to ORFS Male to Female Run to Run
- MIL-DTL-32371 - Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for
- MIL-DTL-32371/1 - Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Straight
- MIL-DTL-32371/10 - Fittings, Hydraulic Tube, Sleeve, Double Angle
- MIL-DTL-32371/2 - Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow
- MIL-DTL-32371/3 - Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degrees Elbow
- MIL-DTL-32371/4 - Fittings, Hydraulic Tube, Spherical to ORPS, Male Adapter, Tee, Spherical on Branch
- MIL-DTL-32371/5 - Fittings, Hydraulic Tube, Spherical to ORPS, Male Adapter, Union Cross, Spherical on Branch
- MIL-DTL-32371/6 - Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Nipple Tube, Regular Hex, Long
- MIL-DTL-32371/7 - Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow, Bulkhead
- MIL-DTL-32371/8 - Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degrees Elbow, Bulkhead
- MIL-DTL-32371/9 - Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Bulkhead, Spherical on Run
- MIL-DTL-32372 - Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65 Degrees F to 250 Degrees F
- MIL-DTL-32372/1 - Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Male
- MIL-DTL-32372/10 - Fitting, Adapter, Tee, Hydraulic and Pneumatic, NPTF Male on Branch to ORFS Female Run to Run
- MIL-DTL-32372/11 - Fitting, Adapter, Tee, Hydraulic and Pneumatic, NPTF Male on Branch to ORFS Male to Female Run to Run
- MIL-DTL-32372/12 - Fitting, Adapter, Tee, Hydraulic and Pneumatic, NPTF Male on Branch to ORFS Male Run to Run
- MIL-DTL-32372/2 - Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male
- MIL-DTL-32372/3 - Fitting, Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male
- MIL-DTL-32372/4 - Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead
- MIL-DTL-32372/5 - Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead
- MIL-DTL-32372/6 - Fitting, Adapter, 90 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead
- MIL-DTL-32372/7 - Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
- MIL-DTL-32372/8 - Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
- MIL-DTL-32372/9 - Fitting, Adapter, 90 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
- MIL-DTL-32460 - Adapter, Hydraulic and Pneumatic, 37 Degrees Flare Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and -65 Degrees F to 250 Degrees F, General Specification for
- MIL-DTL-32460/1 - Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Male
- MIL-DTL-32460/2 - Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Male
- MIL-DTL-32460/3 - Fitting, Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Male
- MIL-DTL-32460/4 - Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Bulkhead
- MIL-DTL-32460/5 - Fitting, Adapter, 45 Degrees, Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Bulkhead
- MIL-DTL-32460/6 - Fitting, Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Bulkhead
- MIL-DTL-32460/7 - Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS, Female Swivel
- MIL-DTL-32460/8 - Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS, Female Swivel
- MIL-DTL-32460/9 - Fitting, Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS, Female Swivel
- MIL-DTL-32464 - Fittings, Adapter, Hydraulic and Pneumatic, 37 Degrees Spherical to ANPT Connectors, 1500 to 3000 PSI, General Specification for
- MIL-DTL-32464/1 - Male Adapter, Straight, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
- MIL-DTL-32464/10 - Male Adapter, Long, Nipple Tube, Hydraulic and Pneumatic Tube, Long Hex, 37 Degrees Spherical to ANPT, 1500-3000 PSI
- MIL-DTL-32464/11 - Male Adapter, Bulkhead, 37 Degrees Spherical to ANPT, 1500-3000 PSI
- MIL-DTL-32464/12 - Male Adapter, Tee, 37 Degrees Spherical to ANPT, ANPT on Branch, 1500-3000 PSI
- MIL-DTL-32464/2 - Male Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
- MIL-DTL-32464/3 - Male Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
- MIL-DTL-32464/4 - Male Adapter, Tee, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI
- MIL-DTL-32464/5 - Male, Adapter, Nipple Tube, Hydraulic and Pneumatic, Regular Hex, 37 Degrees Spherical to NPTF, 1500-3000 PSI
- MIL-DTL-32464/6 - Male Adapted, Union Cross, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI
- MIL-DTL-32464/7 - Male Adapter, 45 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
- MIL-DTL-32464/8 - Male Adapter, 90 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
- MIL-DTL-32464/9 - Male Adapter, Tee, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Run, 1500-3000 PSI
- MIL-DTL-32480 - Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and -65 Degrees F to 250 Degrees F, General Specification for
- MIL-DTL-32480/1 - Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Male
- MIL-DTL-32480/2 - Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male
- MIL-DTL-32480/3 - Fitting, Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male
- MIL-DTL-32480/4 - Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead
- MIL-DTL-32480/5 - Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead
- MIL-DTL-32480/6 - Fitting, Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS Bulkhead
- MIL-DTL-32480/7 - Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
- MIL-DTL-32480/8 - Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
- MIL-DTL-32480/9 - Fitting, Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
- MIL-DTL-32666 - Penetrators, Piping, Mechanical, Surface Ship
- MIL-DTL-38726 - Adapter Assembly, Reusable, Flexible Hose, Low Pressure
- MIL-DTL-5070 - Adapter, Hose to Tube, Pipe and Flange, Reusable - Hydraulic, Fuel, and Oil Lines, General Specification for
- MIL-DTL-5070/1 - Nipple Assembly 90 Degrees, Adapter, Hose to Tube, Reusable, Brazeless, One-Piece Design, Hydraulic, Fuel and Oil Lines, 1/4 through 2 Inch Tube Sizes
- MIL-DTL-5070/2 - Nipple Assembly 45 Degrees, Adapter, Hose to Tube, Reusable, Brazeless, One-Piece Design, Hydraulic, Fuel and Oil Lines, 1/4 through 2 Inch Tube Sizes
- MIL-DTL-51073 - Coupling Halves, Quick Disconnect (Classified - See Your Contracting Officer)
- MIL-DTL-51234 - Coupling Assembly, Quick Disconnect, Plain and Self-Sealing
- MIL-DTL-52525 - Fittings, Hose, Hydraulic, Reusable, Field-Attachable and Clamp-Halves, to Mate with SAE-J517 Type Hoses, General Specification for
- MIL-DTL-52525/1 - Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, Straight, SAE-J516 Type, for Assembly with SAE-J517, Type 100R2 Hose
- MIL-DTL-52525/10 - Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight
- MIL-DTL-52525/11 - Fittings, Hose, Screw-On to 4-Bolt Split-Flange, 45 Degrees Bent Tube
- MIL-DTL-52525/12 - Fittings, Hose, Screw on to Split-Flange 90 Degrees Bent
- MIL-DTL-52525/13 - Fittings, Hose, Crimp Type, Split-Flange Straight
- MIL-DTL-52525/14 - Fittings, Hose Crimp Type, Split-Flange, 45 Degree Bent
- MIL-DTL-52525/15 - Fittings, Hose, Screw-On to 4-Bolt Split-Flange, 90 Degree Bent Tube
- MIL-DTL-52525/16 - Fittings, Clamp-Halves, for 4-Bolt Split-Flange, SAE-J518, Type Split-Flange Clamp (SFC)
- MIL-DTL-52525/17 - Fittings, Clamp-Halves, Flange to Port, for 4-Bolt Split-Flange
- MIL-DTL-52525/2 - Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 45 Degrees Bent Tube
- MIL-DTL-52525/23 - Fittings, Hose, Clamp-on to 4-Bolt Split-Flange, Straight, Type 100R10 (Superseded by MIL-DTL-52525/43)
- MIL-DTL-52525/24 - Fittings, Hose, Clamp-On to 4-Bolt Split-Flange, 45 Degree Bent Tube, Type 100R10 (Superseded by MIL-DTL-52525/44)
- MIL-DTL-52525/25 - Fittings, Hose, Clamp-on to 4-Bolt Split-Flange, 90 Degrees Bent Tube, Short Drop, Type 100R10 (Superseded by MIL-DTL-52525/45)
- MIL-DTL-52525/3 - Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Short Drop
- MIL-DTL-52525/31 - Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel
- MIL-DTL-52525/32 - Fittings, Hose, Reinforced Hydraulic Hose and Clamp-Halves: Field Attachable (Reusable), Screw-on to 37 Degrees Flare Female Swivel, 45 Degrees Bent Tube, for use with Type 100RE Four-Spiral-Wrap Reinforcement Hose
- MIL-DTL-52525/33 - Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves: Field Attachable (Reusable), Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, for use with Type 100RE Four-Spiral-Wrap Reinforcement Hose
- MIL-DTL-52525/34 - Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight
- MIL-DTL-52525/35 - Fittings, Hose, Screw-on to 4-Bolt Split-Flange, 45 Degrees Bent Tube
- MIL-DTL-52525/36 - Fittings, Hose, Crimp Type, Split-Flange 90 Degrees, Bent Tube
- MIL-DTL-52525/37 - Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, Straight
- MIL-DTL-52525/38 - Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 45 Degrees Bent Tube
- MIL-DTL-52525/39 - Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube
- MIL-DTL-52525/4 - Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Long Drop
- MIL-DTL-52525/40 - Fittings, Hose, Crimp Type, Split-Flange, Straight
- MIL-DTL-52525/41 - Fittings, Hose, Crimp Type, Split-Flange, 45 Degrees Bent Tube
- MIL-DTL-52525/42 - Fittings, Hose, Crimp Type, Split-Flange 90 Degrees Bent
- MIL-DTL-52525/43 - Fittings, Hose, Crimp Type, Split-Flange, Straight
- MIL-DTL-52525/44 - Fittings, Hose, Crimp Type, Split-Flange, 45 Degrees Bent Tube
- MIL-DTL-52525/45 - Fittings, Hose, Crimp Type, Split-Flange, 90 Degrees Bent Tube
- MIL-DTL-52525/5 - Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, Straight
- MIL-DTL-52525/6 - Fittings,Hose, Screw-on to 37 Degrees Flare Female Swivel, 45 degrees Tube
- MIL-DTL-52525/7 - Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Short Drop
- MIL-DTL-52525/8 - Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Long Drop
- MIL-DTL-52525/9 - Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, Straight
- MIL-DTL-52618 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, General Specification for
- MIL-DTL-52618/1 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, 90-Degree Elbows, Tees, Crosses, 45-Degree Elbows and Couplings (Straight Sizes)
- MIL-DTL-52618/2 - Fittings, Pipe, Aluminum-Alloy Threaded 150-Pound, Reducers and Close and Open Pattern Return Bends (Straight Sizes)
- MIL-DTL-52618/3 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, 90-Degree Elbows (Reducing Sizes)
- MIL-DTL-52618/4 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, Tees (Reducing Sizes)
- MIL-DTL-52618/5 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, 90-Degree and 45-Degree Street Elbows
- MIL-DTL-52618/6 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, Caps
- MIL-DTL-52618/7 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, Square Head and Square Socket Plugs
- MIL-DTL-52618/8 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, Outside Head, Inside Head, and Face Bushings
- MIL-DTL-52618/9 - Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, Crosses (Reducing Sizes)
- MIL-DTL-5513 - Swivel Joint, Hydraulic
- MIL-DTL-6001 - Fittings; Aircraft, Solder Type, Tube
- MIL-DTL-83296 - Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for
- MIL-DTL-83798 - Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification For
- MIL-DTL-83798/1 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, Straight
- MIL-DTL-83798/2 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 45 Degrees
- MIL-DTL-83798/3 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 90 Degrees
- MIL-DTL-83798/4 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, Straight
- MIL-DTL-83798/5 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 45 Degrees
- MIL-DTL-83798/6 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 90 Degrees
- MIL-DTL-83798/7 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, Straight
- MIL-DTL-83798/8 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, 45 Degrees
- MIL-DTL-83798/9 - Fittings, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, 90 Degrees
- MIL-DTL-85061 - Coupling, Fuel Line, Flexible, 125 PSI
- MIL-DTL-8783 - Clamp, Hose, Flat Band 500 Degrees F, General Specification for
- MIL-DTL-8783/1 - Clamp, Hose, Flat Band 500 Degrees F
- MIL-DTL-8789 - Fitting End, Attachable, Hydraulic, High Pressure (3,000 PSI), General Specification for
- MIL-E-17750 - Elbow, Pipe With Union Tailpiece, Non-Throttling Type, for Gravity-Flow Hot Water Radiators
- MIL-E-17813 - Expansion Joints, Pipe, Metallic Bellows
- MIL-E-17814 - Expansion Joints, Pipe, Slip-Type, Packed (No Superseding Document)
- MIL-E-18435 - Exhaust Head, Pipe (Superseded by A-A-50494)
- MIL-E-23616 - Expansion Joint, Non Flanged Synthetic Rubber, Fire Retardant, 0-150 Psi Oil or Water Service (2 Inch To 12 Inch Nominal Pipe Size ) (Superseded by MIL-E-15330)
- MIL-F-1181 - Fittings, Pipe, Bronze, (Threaded) Use WW-P-460
- MIL-F-1183 - Fitting, Pipe, Cast Bronze, Silver Brazing, General Specification For
- MIL-F-1183/1 - Fittings, Pipe, Cast Bronze, Silver Brazing; Bend, Pipe, Return
- MIL-F-1183/10 - Fitting, Pipe, Cast Bronze, Silver Brazing, Union, Pipe
- MIL-F-1183/11 - Fitting, Pipe, Cast Bronze, Silver Brazing, Union Elbow, Pipe & Union Tee, Pipe
- MIL-F-1183/12 - Fittings, Pipe, Cast Bronze, Silver-Brazing; With Flanged End(S)
- MIL-F-1183/2 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Cap, Pipe
- MIL-F-1183/3 - Fitting, Pipe, Cast Bronze, Silver Brazing, Coupling, Pipe
- MIL-F-1183/4 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Cross, Pipe
- MIL-F-1183/5 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Elbow, Pipe
- MIL-F-1183/6 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Lateral, Pipe
- MIL-F-1183/7 - Fitting, Pipe, Cast Bronze, Silver Brazing, Plug, Pipe
- MIL-F-1183/8 - Fitting, Pipe, Cast Bronze, Silver Brazing, Reducer, Pipe
- MIL-F-1183/9 - Fittings, Pipe, Cast Bronze, Silver-Brazing; Tee, Pipe
- MIL-F-1184 - Fittings, Pipe, Brass or Bronze (Threaded) 125-Pound (Use WW-P-460)
- MIL-F-1224 - Fittings, Tube, Brass or Bronze, 45 Degree Flared (Superseded by SAE-J512)
- MIL-F-16735 - Fitting, Pipe Rapid-Action-Coupling, 6-Inch
- MIL-F-17823 - Flanges, Pipe, Carbon Steel, 300 Psi, W.S.P. (Navy)
- MIL-F-18032 - Fitting, Pipe, Butt Welding, Ferrous Metal (Use ANSI B16.9 & ANSI B16.28)
- MIL-F-18180 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, General Specification for (Superseded by ASME-B16.5)
- MIL-F-18180/1 - Flanges and Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 and 2500, Welding Neck Flanges (Superseded by ASME-B16.5)
- MIL-F-18180/10 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 4008 600, 9008 1500 & 2500, Straight & Reducing Sizes Tees (Superseded by ASME-B16.5)
- MIL-F-18180/11 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500 Straight & Reducing Size Base Tees (Superseded by ASME-B16.5)
- MIL-F-18180/12 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Straight & Reducing Size, Side Outlet Tees (Superseded by ASME-B16.5)
- MIL-F-18180/13 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Straight & Reducing Sizes Crosses (Superseded by ASME-B16.5)
- MIL-F-18180/14 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Straight & Reducing Size, Side Outlet Crosses (Superseded by ASME-B16.5)
- MIL-F-18180/15 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, 45 Deg., Straight & Reducing Sizes Laterals (Superseded by ASME-B16.5)
- MIL-F-18180/16 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Concentric Reducers (Superseded by ASME-B16.5)
- MIL-F-18180/17 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Eccentric Reducers (Superseded by ASME-B16.5)
- MIL-F-18180/18 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, Straight & Reducing Size, True Wyes (Y) (Superseded by ASME-B16.5)
- MIL-F-18180/2 - Flanges and Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 and 2500, Socket Welding Flanges (Superseded by ASME-B16.5)
- MIL-F-18180/3 - Flanges and Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900 1500, and 2500; Slip-on Welding Flanges (Superseded by ASME-B16.5)
- MIL-F-18180/4 - Flanges and Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 and 2500, Lapped Flanges (Superseded by ASME-B16.5)
- MIL-F-18180/5 - Flanges and Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 and 2500 Threaded Flanges (Superseded by ASME-B16.5)
- MIL-F-18180/6 - Flanges and Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 and 2500, Blind Flanges (Superseded by ASME-B16.5)
- MIL-F-18180/7 - Flanges and Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 and 2500, 45 and 90 Degree, Straight and Reducing Size Elbows (Superseded by ASME-B16.5)
- MIL-F-18180/8 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, 90 Deg., Straight & Reducing Sizes Base Elbows (Superseded by ASME-B16.5)
- MIL-F-18180/9 - Flanges & Flanged Fittings, Pipe, Steel, Classes 150, 300, 400, 600, 900, 1500 & 2500, 90 Degree, Straight & Reducing Size, Side Outlet Elbows (Superseded by ASME-B16.5)
- MIL-F-18280 - Fittings, Flareless Tube, Fluid Connection (Superseded by SAE as-18280)
- MIL-F-18287 - Fittings, Hose End, Detachable (for Self Sealing Fuel Hose)
- MIL-F-18866 - Fitting, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel (Use SAE-J514)
- MIL-F-19488 - Fittings, Hose, Water, and Steam (Other Than Flexible, Metallic) (Superseded by WW-C-621, MIL-C-52404 and MIL-S-12165)
- MIL-F-19607 - Fitting, Hose, Reusable, Medium and High Pressure (Use MIL-H-24135)
- MIL-F-20042 - Flanges, Pipe & Bulkhead, Bronze (Silver Brazing)
- MIL-F-20236 - Fittings, Tube and Pipe, Butt Welding, 300 Ps1 and 775 Deg F Maximum (Superseded by ANSI/ASME-B16.9)
- MIL-F-20668 - Flange, Iron (Malleable)
- MIL-F-20670 - Flanges, Pipe, Carbon Steel, 150 P.S.I., W.S.P. (For Naval Shipboard Use)
- MIL-F-20672 - Fitting, Pipe, Aluminum Alloy (Threaded) 125 Pound
- MIL-F-21467 - Fittings, Flareless, Fluid Connection (Shipboard Use) (Use MIL-F-18866)
- MIL-F-23467 - Fitting and Flanges, Wrought, Seamless, Butt and Socket Welding, AUSTENITICCORROSION-Resistant Steel - Classified - See Your Contracting Officer
- MIL-F-23508 - Fittings & Flanges, Wrought, Seamless, Butt & Socket Welding, Nickel Chromium Iron Alloy
- MIL-F-23509 - Fittings & Flanges, Wrought, Seamless Butt & Socket Welding, Nickel-Copper
- MIL-F-24202 - Fitting, Butt Welding, Seamless or Welded, 70-30 Copper-Nickel Alloy 700 Psi, 200 Deg. F.
- MIL-F-24227 - Fittings and Flanges, Cast Bronze, Silver-Brazing Suitable for Ultrasonic Inspection
- MIL-F-24339 - Fittings and Flanges, Wrought, Seamless, Butt and Socket Welding Carbon Steel
- MIL-F-24342 - Fitting and Flange, Wrought Seamless, Butt and Socket Welding, 70-30 Copper Nickel
- MIL-F-24787 - Fittings, End, Reusable for Flexible Hose Assemblies, General Specification For
- MIL-F-24787/1 - Fittings, End, Type F, Fl, and Ffl, Flange, Reusable for Flexible Hose Assemblies
- MIL-F-24787/2 - Fittings, End, Type a, 37 Deg. Flare, Reusable for Flexible Hose Assemblies
- MIL-F-24787/3 - Fittings, End, Types C and cl, O-Ring Seal Union, Reusable for Flexible Hose Assemblies
- MIL-F-24787/4 - Fittings, End, Types E and El, Split Clamp, Reusable, With Types Sc (Split Clamp), Tf Tailpiece Female and Tm Tailpiece Male for Flexible Hose Assemblies
- MIL-F-24787/5 - Fittings, End, Type D, Hose To Hose 90 Deg. Elbow, Reusable for Flexible Hose Assemblies
- MIL-F-24787/6 - Fittings, End, Type U, 180 Deg. Return, Hose To Hose, Reusable for Flexible Hose Assemblies
- MIL-F-24787/7 - Fittings, End, Types B and BL, Gasket Seal Union, Reusable for Flexible Hose Assemblies
- MIL-F-27272 - Fittings, Tetrafluoroethylene, Hose High Temperature, Mediumpressure, General Specific
- MIL-F-27417 - Fitting, Rocket Engine, Fluid Connection
- MIL-F-2808 - Fitting, Air Hose, Salvage, 1 1/4 Inch (No Superseding Document)
- MIL-F-2864 - Floater, Hose, Nonmetallic
- MIL-F-3268 - Fittings; Pipe, Steel, Special (for Tanker Unloading Installations) (Superseded by A-A-50581)
- MIL-F-3541 - Fittings, Lubrication, General Specification for (Superseded by SAE-as35411)
- MIL-F-45911 - Fittings, Automotive Tube, Sperical Sleeve (Compression) Type, Brass (See Notice for Replacement Information))
- MIL-F-45968 - Fittings, Automotive Tube, Brass, Inverted Flare (With Steel Nut) (See Notice for Replacement Information)
- MIL-F-52525 - Fitting, Wire Reinforced Hydraulic Hose and Clamp Halves, General Specification For
- MIL-F-52525/1 - Fitting, Wire Reinforced Hydraulic Hose and Clamp Halves, Field Attachable (Reuseable)
- MIL-F-52525/10 - Fitting, Wire Reinforced Hydraulic Hose & Clamp Halves, Field Attachable (Reuseable),
- MIL-F-52525/11 - Fitting, Wire Reinforced Hydraulic Hose and Clamp Halves, Field Attachable (Reuseable)
- MIL-F-52525/12 - Fitting, Wire Reinforced Hydraulic Hose and Clamp Halves, Field Attachable (Reuseable)
- MIL-F-52525/13 - Fitting, Wire Reinforced Hydraulic Hose and Clamp Halves, Field Attachable (Reuseable)
- MIL-F-52525/14 - Fitting, Wire Reinforced Hydraulic Hose & Clamp Halves, Field Attachable (Reuseable),
- MIL-F-52525/15 - Fitting, Wire Reinforced Hydraulic Hose & Clamp Halves, Field Attachable (Reuseable),
- MIL-F-52525/16 - Fitting, Wire Reinforced Hydraulic Hose & Clamp Halves, Clamp Halves for 4 Bolt Split
- MIL-F-52525/17 - Fitting, Clamp-Halves, Flange To Port, for 4-Bolt Split-Flange
- MIL-F-52525/18 - Fitting, Wire Reinforced Hydraulic Hose & Clamp Halves, Adapter, Tube To Hose, Field Attachable (Reusable), 37 Deg. Flare Female Swivel To Screw on, Straight, Type E, for Use With Type 100Rx 4 Spiral
- MIL-F-52525/19 - Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves. Field Attachable (Reuseable), Clamp-on To 4-Bolt Split-Flange, Straight, Type a, Adapter, for Use With Type 100R1 Single Wire Braid Hose (No
- MIL-F-52525/2 - Fitting, Wire Reinforced Hydraulic Hose and Clamp Halves, Field Attachable (Refusable)
- MIL-F-52525/20 - Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves Field Attachable (Reuseable), Clamp-on To 4-Bolt Split-Flange, 45 Deg, Bent Tube, Type a, Elbow, for Use With Type 100R1 Single Wire Braid Hos
- MIL-F-52525/21 - Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves Field Attachable (Reuseable), Clamp-on To 4-Bolt Split-Flange, 90 Deg, Short Drop, Type a, Elbow, for Use With Type 100R1 Single Wire Braid Ho
- MIL-F-52525/22 - Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves Field Attachable (Reuseable), Clamp-on To 4-Bolt Split-Flange. 90 Deg. Bent Tube, Long Drop, Type a, Elbow, for Use With Type 100R1 Single Wir
- MIL-F-52525/23 - Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves Field Attachable (Reuseable)
- MIL-F-52525/24 - Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves Field Attachable (Resueable)
- MIL-F-52525/25 - Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves Field Attachable (Reuseable)
- MIL-F-52525/26 - Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves Field Attachable (Reuseable), Clamp-on To 4-Bolt Split-Flange, 90 Deg. Bent Tube, Long Drop, Type C, Elbow, for Use With Type 100R10 4-Spiral
- MIL-F-52525/27 - Fittings, Wire Reinforced Hydraulic Hose & Clamp-Halves: Field Attachable (Reuseable), Clamp-on To 4-Bolt Split-Flange, Straight, Type B, Adapter, for Use With Type 100R2 Double Wire Braid Hose (Super
- MIL-F-52525/28 - Fittings, Wire Reinforced Hydraulic Hose & Clamp-Halves: Field Attachable (Reuseable), Clamp-on To 4-Bolt Split-Flange, 45 Deg Bent Tube,Type B, Elbow, for Use With Type 100R2 Double Wire Braid Hose (
- MIL-F-52525/29 - Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves: Field Attachable (Reuseable), Clamp-on To 4-Bolt Split-Flange, 90 Deg. Bent Tube, Short Drop, Type B, Elbow, for Use With Type 100R2 Double B
- MIL-F-52525/3 - Fitting, Wire Reinforced Hydraulic Hose & Clamp Halves, Field Attachable (Reuseable),
- MIL-F-52525/30 - Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves Field Attachable (Reuseable), Clamp-on To 4-Bolt Split-Flange, 90 Deg, Bent Tube, Long Drop, Type B, Elbow, for Use With Type 100R2 Double Bra
- MIL-F-52525/31 - Fittings, Wire Reinforced Hydraulic Hose & Clamp-Halves: Field Attachable (Reusable),
- MIL-F-52525/32 - Fittings, Wire Reinforced Hydraulic Hose & Clamp-Halves: Field Attachable (Reusable), Screw
- MIL-F-52525/33 - Fittings,Wire Reinforced Hydraulic Hose & Clamp-Halves: Field Attachable(Reusable), Screw
- MIL-F-52525/34 - Fittings, Wire Reinforced Hydraulic Hose & Clamp-Halves: Field Attachable (Reusable),
- MIL-F-52525/35 - Fittings, Wire Reinforced Hydraulic Hose & Clamp-Halves: Field Attachable (Reusable),S
- MIL-F-52525/36 - Fittings, Wire Reinforced Hydraulic Hose & Clamp-Halves: Field Attachable (Reusable),S
- MIL-F-52525/37 - Fittings, Hose, Screw-on To 37 Deg. Flare Female Swivel, Straight, Type 100R12
- MIL-F-52525/38 - Fittings, Wire Reinforced Hydraulic Hose & Clamp-Halves:Field Attachable(Reusable),Scr
- MIL-F-52525/39 - Fittings,Wire Reinforced Hydraulic Hose & Clamp-Halves:Fieldattachable (Reusable),Scre
- MIL-F-52525/4 - Fitting, Wire Reinforced Hydraulic Hose & Clamp Halves, Field Attachable (Reuseable),
- MIL-F-52525/40 - Fittings, Wire Reinforced Hydraulic Hose & Clamp-Halves: Field Attachable (Reusable),S
- MIL-F-52525/41 - Fittings,Wire Reinforced Hydraulic Hose & Clamp-Halves: Field Attachable(Reusable), Screw
- MIL-F-52525/42 - Fittings, Wire Reinforced Hydraulic Hose & Clamp-Halves: Field Attachable (Reusable),
- MIL-F-52525/5 - Fitting, Wire Reinforced Hydraulic Hose and Clamp Halves, Field Attachable (Reuseable)
- MIL-F-52525/6 - Fitting, Wire Reinforced Hydraulic Hose & Clamp Halves, Field Attachable (Reusable), S
- MIL-F-52525/7 - Fitting, Wire Reinforced Hydraulic Hose & Clamp Halves, Field Attachable (Reuseable),
- MIL-F-52525/8 - Fitting, Wire Reinforced Hydraulic Hose & Clamp Halves, Field Attachable (Reuseable),
- MIL-F-52525/9 - Fitting, Wire Reinforced Hydraulic Hose & Clamp Halves, Field Attachable (Reuseable),
- MIL-F-52618 - Fittings, Pipe, Aluminum-Alloy (Threaded) 150-Pound: General Specification For
- MIL-F-52618/1 - Fittings, Pipe, Aluminum Alloy (Threaded) 150Pound 90-Degreeelbows, Tees, Crosses, 45-
- MIL-F-52618/2 - Fittings, Pipe, Aluminum-Alloy (Threaded) 150-Pound Reducers& Close & Open Pattern Ret
- MIL-F-52618/3 - Fittings, Pipe, Aluminum Alloy (Threaded) 150-Pound 90 Degree Elbow (Reducing Sizes)
- MIL-F-52618/4 - Fitting, Pipe, Aluminum-Alloy (Threaded) 150-Pound Tees (Reducing Sizes)
- MIL-F-52618/5 - Fitting, Pipe, Aluminum Alloy (Threaded) 150-Pound 90-Degree& 45-Degree Street Elbows
- MIL-F-52618/6 - Fittings, Pipe, Aluminum-Alloy (Threaded) 150-Pound Caps
- MIL-F-52618/7 - Fittings, Pipe, Aluminum-Alloy (Threaded) 150-Pound Square Head and Square Socket Plugs
- MIL-F-52618/8 - Fitting, Pipe, Aluminum Alloy (Threaded) 150-Pound Outside Head, Inside Head, & Face B
- MIL-F-52618/9 - Fitting, Pipe, Aluminum Alloy (Threaded) 150 Pound Crosses (Reducing Sizes)
- MIL-F-5506 - Fitting, Method of Testing Tube (No Superseding Document)
- MIL-F-5509 - Fitting, Flared Tube, Fluid Connection (See Notice 2 for Additional Superseding Information)
- MIL-F-6001 - Fitting, Aircraft, Solder Type, Tube (Asg)
- MIL-F-83296 - Fitting, Tetrafluoroethylene Hose, High Temperature, High Pressure (3000 Psi, Hydrauli
- MIL-F-83798 - Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification For
- MIL-F-83798/1 - Fitting, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel, Nut, Straight
- MIL-F-83798/10 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Flared, Swivel Nut, Straight)
- MIL-F-83798/11 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Flared, Swivel Nut, 45 Degrees)
- MIL-F-83798/12 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Flareless, Swivel Nut, 90 Degrees)
- MIL-F-83798/13 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Flareless, Swivel Nut, Straight)
- MIL-F-83798/14 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Flareless, Swivel Nut, 45 Degrees)
- MIL-F-83798/15 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Swivel Nut, 90 Degrees)
- MIL-F-83798/16 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Swivel Flange Straight)
- MIL-F-83798/17 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Swivel Flange, 45 Degrees)
- MIL-F-83798/18 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple Subassembly, Swivel Flange, 90 Degrees)
- MIL-F-83798/19 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, Stright)
- MIL-F-83798/2 - Fitting, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 45 Degrees
- MIL-F-83798/20 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, 45 Degrees)
- MIL-F-83798/21 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, 90 Degrees)
- MIL-F-83798/22 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flareless, Swivel Nut, Straight)
- MIL-F-83798/23 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flared, Swivel Nut, 45 Degrees)
- MIL-F-83798/24 - Fittings, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Flareless, Swivel Nut, 90 Degrees)
- MIL-F-83798/25 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Swivel Flange, Straight)
- MIL-F-83798/26 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Swivel Flange, 45 Degrees)
- MIL-F-83798/27 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Nipple, Swivel Flange, 90 Degrees)
- MIL-F-83798/28 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Socket)
- MIL-F-83798/29 - Fitting, Rubber Hose, Lightweight, Medium Pressure, (Sleeve Insert)
- MIL-F-83798/3 - Fitting, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 90 Degrees
- MIL-F-83798/4 - Fitting, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, Straight
- MIL-F-83798/5 - Fitting, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 45 Degrees
- MIL-F-83798/6 - Fitting, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 90 Degrees
- MIL-F-83798/7 - Fitting, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, Straight
- MIL-F-83798/8 - Fitting, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, 45 Degrees
- MIL-F-83798/9 - Fitting, Rubber Hose, Lightweight, Medium Pressure, Swivel Flange, 90 Degrees
- MIL-F-85421 - Fittings, Tube, Fluid Systems, Separable, Beam Seal, 3000/4000 Psi, General Specification for (Superseded by SAE as-85421)
- MIL-F-85421/1 - Fitting End, Standard Dimensions for Dynamic Beam Seal, Male (Superseded by SAE as-85421/1)
- MIL-F-85421/10 - Fitting, Adapter, Beam Seal, 3000/4000 Psi, Male To Flareless (Superseded by SAE as-85421/10)
- MIL-F-85421/11 - Fitting, Union, Beam Seal, 3000/4000 Psi, Male Ends (Superseded by SAE as-85421/11)
- MIL-F-85421/12 - Fitting, Elbow, 90 Deg., Beam Seal, 3000/4000 Psi, Male To Male (Superseded by SAE as-85421/12)
- MIL-F-85421/13 - Fitting, Elbow, 90 Deg., Beam Seal, 3000/4000 Psi, Bulkhead, Male Ends (Superseded by SAE as-85421/13)
- MIL-F-85421/14 - Fitting, Elbow, 90 Deg., Beam Seal, 3000/4000 Psi, Male To Female (Superseded by SAE as-85421/14)
- MIL-F-85421/15 - Fitting, Elbow, 45 Deg., Beam Seal, 3000/4000 Psi, Bulkhead, Male Ends (Superseded by SAE as-85421/15)
- MIL-F-85421/16 - Fitting, Tee, Beam Seal, 3000/4000 Psi, Bulkhead on Run, Male Ends (Superseded by SAE as-85421/16)
- MIL-F-85421/17 - Fitting, Tee, Beam Seal, 3000/4000 Psi, Bulkhead on Branch, Male Ends (Superseded by SAE as-85421/17)
- MIL-F-85421/2 - Fitting End, Standard Dimensions for Bulkhead, Dynamic Beam Seal, Male (Superseded by SAE as-85421/2)
- MIL-F-85421/3 - Fitting, Tee, Reducer, Beam Seal, 3000/4000 Psi, 3 Male Ends (Superseded by SAE as-85421/3)
- MIL-F-85421/4 - Fitting, Tee, Reducer and Non-Reducer, Beam Seal, 3000/4000 Psi, Male on Run, Swivel Nut on Branch (Superseded by SAE as-85421/4)
- MIL-F-85421/5 - Fitting, Tee, Reducer and Non-Reducer, Beam Seal, 3000/4000 Psi, Male on Run and Branch, Swivel Nut on Run (Superseded by SAE as-85421/5)
- MIL-F-85431/15 - Fitting, Elbow, 45 Degree, Beam Seal, 3000/ 4000 Psi, Bulkhead, Male Ends
- MIL-F-85720 - Fitting, Tube, Fluid Systems, Separable, High Pressure, Dynamic Beam Seal, General Specification for (Superseded by SAE as-85720)
- MIL-F-85720/1 - Fittings, Tube, Fluid Systems, Separable, High Pressure, Dynamic Beam Seal, Design Standard for Male End (Superseded by SAE as-85720/1)
- MIL-F-8789 - Fitting End, Attachable Hydraulic, High Pressure Hose
- MIL-F-8839 - Fittings, Lubrication Drive Type
- MIL-H-24136 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced for Flexible Hose Assemblies, General Specification For
- MIL-H-24136/1 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced for Flexible Hose Assemblies (Low Pressure Sizes -80 Through -192)
- MIL-H-24136/2 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced, for Flexible Hose Assemblies (High Pressure Sizes -4 Through -32)
- MIL-H-24136/3 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced for Flexible Hose Assemblies (Low Pressure Sizes -4 Thr0Ugh -32)
- MIL-H-24136/4 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced, for Flexible Hose Assemblies (Low Pressure Sizes -40, -48 and -64)
- MIL-H-24565 - Hose and Fittings, Oil and Turbine Fuel, Smooth Bore, Corrugated Cover, 7-Inch (No Superseding Document)
- MIL-H-62165/3 - Hose Fittings, Reusable, for Non Metallic Thermoplastic Hose (No Superseding Document)
- MIL-HDBK-1655 - Classification of Defects of Flareless and Beam Seal Fittings
- MIL-HDBK-806 - Inspection and Acceptance Standards for Propulsion Fluid Cells and Fittings (Superseded by MIL-STD-801)
- MIL-I-24063 - Insert Sets, Sound Isolation for RISIC-1 Flexible Connectors
- MIL-I-24783 - Isolator, Ring Type, Pressure, for Shipboard Sewage Service
- MIL-J-26870 - Joint, Swivel, Aircraft Fuel
- MIL-J-2948 - Joint, Steel, Flexible (for Temporary Pipe Connections) (No Superseding Document)
- MIL-J-5513 - Joints, Hydraulic Swivel
- MIL-M-11726 - Manifold, Air Line; One To Seven Outlets (No Superseding Document)
- MIL-M-27386 - Manifold Assemblies, Hose-Line: Fueling: 4-Inch, Quick-Coupling Type (No Superseding Document)
- MIL-M-28608 - Mender, Hose (No Superseding Document)
- MIL-M-52107 - Manifold, Fuel, Bulk Transfer, Quick Disconnect Cam-Locking Connections (Use MIL-M-82002)
- MIL-N-17752 - Nozzle, Spray, Water Cooling
- MIL-N-22602 - Nozzle, Abrasive Blast, Venturi Type (No Superseding Document)
- MIL-N-25087 - Nipple, Emergency Oxygen Cylinder Valve, Breakoff (Superseded by MIL-V-7560a)
- MIL-N-25556 - Nozzle, Fill and Vent, Fuming Nitric Acid Servicing
- MIL-N-7364 - Nozzle, Oil Servicing, Pistol Grip, Non Drip, Type a&3a
- MIL-P-10388 - Pipe Fittings: One or More Ends Grooved (Superseded by A-A-52592)
- MIL-P-14351 - Pipeline Barrel, Cleaner Trap: Incoming and Outgoing (No Superseding Document)
- MIL-P-15742 - Plug, Plastic (Heat-Exchanger Tube) (Replaced by A-A-59949)
- MIL-P-18174 - Pipe Fitting, Steel, Threaded 2000, 3000, & 6000 Pound, Wog Use ANSI B16.11
- MIL-P-18178 - Pipe Bends, Fabricated (for Shore Use)
- MIL-P-18501 - Pipe and Fittings, Steel, Lightweight, Spiral and Longitudinal Welded Seam (No Superseding Document)
- MIL-P-18901 - Plug, Protective and Preservative, Plastic (for Internal Threads) (No Superseding Document)
- MIL-P-22011 - Pipe Fitting, Plastic, Rigid, Unplasticized, High Impact, Polyvinylchloride
- MIL-P-54001 - Plug, Pipe, Magnetic, Headless, Iron, Steel or Aluminum Alloy (Superseded by A-A-59432)
- MIL-P-7105 - Pipe Threads, Taper, Aeronautical National Form, Symbol Anpt, General Requirements for (Superseded by SAE-as71051)
- MIL-PRF-12386 - Clamp, Repair, Pipe: with Fuel-Resistant Gasket
- MIL-PRF-13789 - Strainers, Sediment: Pipeline, Basket Type
- MIL-PRF-20042 - Flanges, Pipe, Bronze (Silver Brazing)
- MIL-PRF-25676 - Adapter, Pressure Lubricating Oil Servicing, Aircraft (Superseded by MIL-DTL-25677)
- MIL-R-11521 - Ring, Expansion, Hose, Brass (Superseded by A-A-55535)
- MIL-R-17882 - Repair Kits, Metallic Pipe and General Purpose, Damage Control
- MIL-S-10385 - Sandtrap Assembly (for Portable 6-Inch Petroleum Pipeline) (No Superseding Document)
- MIL-S-12165 - Strainer, Suction, Fire Hose, and Strainers, Suction, Hose
- MIL-S-13789 - Strainers, Sediment: Pipeline, Basket Type
- MIL-S-15573 - Strainers, Sediment, Pipeline (for Gasoline Service) (No Superseding Document)
- MIL-S-16293 - Strainers, Sediment: Pipeline, Water, Air, Gas, Oil or Steam (Superseded by WW-S-2739)
- MIL-S-17635 - Separators and Purifiers, Steam, Pipeline and Receiver
- MIL-S-17849 - Strainers, Sediment, Pipeline, Duplex (With and Without Magnet)
- MIL-S-19901 - Spool Pieces (for Submarine Fuel Loading Line) (Superseded by MIL-F-3268B)
- MIL-S-21427 - Strainer, Assemblies, Main Steam, High Pressure (Sizes 4 Inches and Above)
- MIL-S-22263/3 - Swage End Ferrule, Variable Cavity
- MIL-S-27661 - Strainer, Sediment, Jet Fuel Unit, 600 Gpm (No Superseding Document)
- MIL-S-28678 - Strainer, Steam, Bronze Body, 250 Psi, Silver Brazed Socket Connection (See Notice for Replacement Information)
- MIL-S-2953 - Strainers, Steam (Sizes 3 Inches and Below)
- MIL-S-416 - Strainer, Well, Water, Wire-Wound (No Superseding Document)
- MIL-STD-1330 - Precision Cleaning and Testing of Shipboard Oxygen, Helium, Helium-Oxygen, Nitrogen, and Hydrogen Systems
- MIL-STD-1514 - Fittings, Tetrafluoroethylene Hose High Temperature, High Pressure (3000 Psi) Hydraulic and Pneumatic Classification of Defects (No Superseding Document)
- MIL-STD-1655 - Fittings, Flareless, Classification of Defects of (Superseded by MIL-HDBK-1655)
- MIL-STD-438 - SCHEDULE OF PIPING, VALVES, FITTINGS, and ASSOCIATED PIPING COMPONENTS FOR SUBMARINES SERVICE
- MIL-STD-777 - Schedule of Piping, Valves, Fittings, and Associated Piping Components for Naval Surface Ships
- MIL-STD-845 - Fitting, Tetrafluoroethylene Hose High Temperature, Medium Pressure Classification of Defects (No Superseding Document)
- MIL-T-18112 - Traps, Steam, Bucket, Float, Impulse and Return, and Air Vents, Float and Thermostatic (Use WW-T-696)
- MIL-T-21092 - Trap, Air and Water, Ball Float (150 Psig Working Pressure) (Superseded by WW-T-696)
- MIL-T-2118 - Trap, Steam, Angle, Thermostatic
- MIL-T-22064 - Towing Assembly, Helicopter (Load Measuring and Release System for Towing by Helicopter)
- MIL-T-960 - Traps, Steam, Intermittent Discharge and Continuous Flow, Naval Shipboard
- MIL-U-18181 - Union, Pipe, Flanged, Iron (125, 250, and 300 Psi Working Steam Pressure)
- MIL-U-18182 - UNION, PIPE, FORGED STEEL, THREADED, WATER-OIL-GAS (2,000, 3,000 and 6,000 LB/IN2)
- MIL-U-18183 - Union, Pipe, Flanged, Steel
- MIL-U-18249 - Unions, Pipe, Bronze or Naval Brass, Threaded Pipe Connection, 250-Pounds Wsp (Navy) (Use WW-U-516)
- MIL-U-18250 - Union, Pipe, Steel or Malleable Iron, Threaded Pipe Connections, 300 Pound Wp (Superseded by ANSI B16.39)
- MIL-V-23219 - Valve Manifolds, High Pressure Air Reducing
- MS-123120 - Plug - Straight Thread, O-Ring Seal, 1/4 Inch, Aluminum
- MS-123121 - Plug - Straight Thread, O-Ring Seal, 5/16 Inch, Aluminum
- MS-123122 - Plug - Straight Thread, O-Ring Seal, 3/8 Inch, Aluminum
- MS-123123 - Plug - Straight Thread, O-Ring Seal, 7/16 Inch, Aluminum
- MS-123124 - Plug - Straight Thread, O-Ring Seal, 1/2 Inch, Aluminum
- MS-123125 - Plug - Straight Thread, O-Ring Seal, 9/16 Inch, Aluminum
- MS-123126 - Plug - Straight Thread, O-Ring Seal, 5/8 Inch, Aluminum
- MS-123127 - Plug - Straight Thread, O-Ring Seal, 3/4 Inch, Aluminum,
- MS-123128 - Plug - Straight Thread, O-Ring Seal, 7/8 Inch, Aluminum
- MS-123129 - Plug - Straight Thread, O-Ring Seal, 1 Inch, Aluminum
- MS-123130 - Plug - Straight Thread, O-Ring Seal, 1 1/16 Inch, Aluminum
- MS-123131 - Plug - Straight Thread, O-Ring Seal, 1 1/8 Inch, Aluminum
- MS-123132 - Plug - Straight Thread, O-Ring Seal , 1 1/4 Inch Aluminum
- MS-123133 - Plug - Straight Thread, O-Ring Seal, 1 5/16 Inch, Aluminum
- MS-123134 - Plug - Straight Thread, O-Ring Seal, 1 3/8 Inch, Aluminum
- MS-123135 - Plug - Straight Thread, O-Ring Seal, 1 1/2 Inch, Aluminum
- MS-123136 - Plug - Straight Thread, O-Ring Seal, 1 5/8 Inch, Aluminum
- MS-123137 - Plug - Straight Thread, O-Ring Seal, 1 3/4 Inch, Aluminum
- MS-123138 - Plug - Straight Thread, O-Ring Seal, 1 7/8 Inch, Aluminum
- MS-123139 - Plug - Straight Thread, O-Ring Seal, 2 Inch, Aluminum
- MS-123140 - Plug - Straight Thread, O-Ring Seal, 2 1/8 Inch, Aluminum
- MS-123141 - Plug - Straight Thread, O-Ring Seal, 2 1/4 Inch, Aluminum
- MS-123142 - Plug - Straight Thread, O-Ring Seal, 2 3/8 Inch, Aluminum
- MS-123143 - Plug - Straight Thread, O-Ring Seal, 2 1/2 Inch, Aluminum
- MS-14303 - Pipe Fittings, Steel, Threaded, Pressure Class 2000, 3000, and 6000 Pound Wog
- MS-14304 - Coupling, Caps, Plugs, and Bushings, Pipe Threaded, Pressure Class 3000 and 6000
- MS-14305 - Fittings, Pipe, Brass or Bronze, Threaded (Tees, Crosses, 45-Degree Elbows, and Couplings), Class 125
- MS-14306 - Fittings, Pipe, Brass or Bronze, Threaded (Reducers, Close and Open Return Bends, and 45-Degree Y-Branches), Class 125
- MS-14307 - Elbows, Pipe, Brass or Bronze, Threaded, 45-Degree, Street, Class 125
- MS-14308 - Elbows, Pipe, Brass or Bronze, Threaded, 90-Degree, Reducing, Class 125
- MS-14309 - Tees, Pipe, Brass or Bronze, Threaded, Reducing, Class 125
- MS-14310 - Caps, Pipe, Brass or Bronze, Threaded, Class 125
- MS-14311 - Fittings, Pipe, Brass or Bronze, Threaded (90-Degree Elbows, Tees, Crosses, 45-Degree Elbows, and Couplings), Class 250
- MS-14312 - Elbows, Pipe, Brass or Bronze, Threaded, 90-Degree, Reducing, Class 250
- MS-14313 - Tees, Pipe, Brass or Bronze, Threaded, Reducing, Class 250 (No Superseding Document)
- MS-14314 - Plugs, Pipe, Brass or Bronze, Threaded (Square Head and Square Socket), Classes 250 and 125
- MS-14315 - Bushings, Pipe, Brass or Bronze, Threaded (Outside Head, Inside Head, and Face) Class 250
- MS-15000 - Fittings, Lubrication-Hydraulic, Acceptable Tip Designs (Superseded by SAE as-15000)
- MS-15001 - Fittings, Lubrication (Hydraulic) Surface Check, 1/4-28 Taper Threads, Steel, Type I (Superseded by SAE as-15001)
- MS-15002 - Fittings, Lubrication (Hydraulic) Surface Check, Straight Threads, Steel, Type Ii (Superseded by SAE as-15002)
- MS-15003 - Fittings, Lubrication (Hydraulic) Surface Check, 1/8 Pipe Threads, Steel Type Iii (Superseded by SAE as-15003)
- MS-15004 - Fittings, Lubrication (Hydraulic) Surface Check, 1/4-28 Taper Threads, Nickel-Copper Alloy, Type Iv (Superseded by SAE as-15004)
- MS-15005 - Fittings, Lubrication, Throat or Surface Check, 1/8 Pipe Threads, Nickel-Copper Alloy, Type V (Superseded by SAE as-15005)
- MS-15006 - Fittings, Lubrication (Hydraulic) Leakproof, 1/8 Pipe Threads, Steel, Type VI (Superseded by SAE as-15006)
- MS-15011 - Fittings, Hose, Welding and Cutting, Oxygen Andacetylene (Superseded by CGA-E1)
- MS-15182 - Nut, Coupling (for Pressed Metal Lavatory)
- MS-15720 - Fittings, Lubrication (Hydraulic) Throat or Surface Check, 1/4-28 Taper Threads, Corrosion Resistant Steel, Type Vii (Superseded by SAE as-15720)
- MS-15721 - Fitting, Lubrication (Hydraulic) Throat or Surface Check, 1/8 Pipe Threads, Corrosion Resistant Steel, Type Viii (Superseded by SAE as-15721)
- MS-16051 - Coupling, Ground Cooling, Combat Type Aircraft
- MS-16142 - Boss, Gasket Seal Straight Thread Tube Fitting, Standard Dimensions for (Superseded by SAE-J1926/1 and ISO-725)
- MS-16267 - Elbows, Tube, 90 Degree, Flareless Typestraight Thread (See MIL-F-21467)
- MS-16722 - Boss, Pipe
- MS-17319 - Bushing - Screw, Plain (MIL-S-8879 Thread)
- MS-17833 - Connector, Pneumatic Starter Duct, Flanged, Male
- MS-17834 - Adapter, Pneumatic Starter Duct Nipple and Flange, Male
- MS-17835 - Connector, Pneumatic Starter Duct, Flange, Female
- MS-17836 - Connector, Pneumatic Starter, Duct, Double Ended
- MS-18039 - Adapter - for Connection of Coupling per MIL-C-25531B (Asg) To Class Ii End Fitting per MIL-C-25531 (Asg) (No Superseding Document)
- MS-18040 - Adapter - for Connection of Coupling per MIL-C-25531 To ms-17833
- MS-18073 - Elbow, 90 Deg. Swivel Flange, Hose Fitting AMS 5639 Cres Steel (No Superseding Document)
- MS-18074 - Elbow, 45 Deg. Swivel Flange, Hose Fitting AMS 5639 Cres Steel (No Superseding Document)
- MS-18075 - Nipple, Swivel Flange, Hose Fitting AMS 5639 Cres Steel (No Superseding Document)
- MS-18076 - Flange, Swivel, Hose Fitting AMS 5639 Cres Steel (No Superseding Document)
- MS-18077 - Elbow, 90 Deg. Swivel Nut, Hose Fitting AMS 5639 Cres Steel (No Superseding Document)
- MS-18078 - Elbow, 45 Deg.Swivel Nut, Hose Fitting AMS 5639 Cres Steel (No Superseding Document)
- MS-18079 - Nut, Wire Retained, Swivel Safety Wire Holes, Hose Fitting AMS 5639 Cres Steel (No Superseding Document)
- MS-18080 - Nut, Wire Retained, Swivel, Safety Wire Holes Hose Fitting AMS 5639 Cres Steel (No Superseding Document)
- MS-18081 - Nipple, Hose Fitting AMS 5639 Cres Steel (No Superseding Document)
- MS-18082 - Socket, Hose Fitting, AMS 5639 Cres Steel (No Superseding Document)
- MS-18083 - Wire, Retaining, Swivel Nut, AMS5637 (No Superseding Document)
- MS-18084 - Design Standard for Assembly of Tetrafluoroethylene Hose Fittings (No Superseding Document)
- MS-18085 - Fitting End-Tetrafluoroethylene Hose, Medium Pressure, Swivel Nut, Corrosion Resistant Steel (No Superseding Document)
- MS-18086 - Fitting End-Tetrafluoroethylene Hose, Medium Pressure, 45 Deg. Swivel Nut, Corrosion Resistant Steel (No Superseding Document)
- MS-18087 - Fitting End-Tetrafluoroethylene Hose, Medium Pressure, 90 Deg. Swivel Nut, Corrosion Resistant Steel (No Superseding Document)
- MS-18088 - Fitting End- Tetrafluoroethylene Hose Medium Pressure, Swivel Flange Corrosion Resistant Steel
- MS-18089 - Fitting End-Tetrafluoroethylene Hose, Medium Pressure, 45 Deg. Swivel Flange, Corrosion Resistant Steel (No Superseding Document)
- MS-18090 - Fitting End-Tetrafluoroethylene Hose, Medium Pressure, 90 Deg. Swivel Flange, Corrosion Resistant Steel (No Superseding Document)
- MS-18229 - Plug for O-Ring Gasket
- MS-18285 - Flexibility and Stress Intensification Factors (Superseded by ANSI-B31.1)
- MS-18301 - High Pressure Drain Orifice Plates and Strainers
- MS-18307 - Laterals (Y-Branch), Forged Steel Socket Welding, 3000 PSI at 1000 Degree F (MAX.) Steam Service
- MS-18308 - Alloy Steel Socket Welding Flanges and Flanged Nipples, 1/4 Inch and 3/8 Inch, 600 Pounds per Square Inch at 850 Degrees F (Maximum)
- MS-20756 - Flange, Swivel, Retaining
- MS-20757 - Connector, Fixed Flange, to Hose
- MS-20758 - Elbow, Hose, Flanged, Swivel, 45 Degree
- MS-20759 - Elbow, Hose, Flanged Swivel, 90 Degrees
- MS-20760 - Adapter, Straight, Flange to Tube
- MS-20761 - Elbow, Flared Tube, Flanged, Swivel, 45 Degree
- MS-20762 - Elbow, Flared Tube, Flanged, Swivel, 90 Degree
- MS-20819 - Sleeve, Flared Tube Fitting (Superseded by SAE as-5176)
- MS-20822 - ELBOW, FLARED TUBE and PIPE THREADS, 90 DEG. (SUPERSEDED BY SAE AS-5195)
- MS-20823 - Elbow, 45 Deg. Pipe To Flared (Superseded by SAE as-5196)
- MS-20825 - Tee, Pipe To Tube, Pipe Thread on Side (Superseded by SAE as-5197)
- MS-20826 - Tee, Pipe To Tube, Pipe Thread on Run (Superseded by SAE as-5198)
- MS-20913 - Plug, Pipe (See Notice 2 for Replacement Information)
- MS-21336 - Plugs, Pipe, Iron or Steel.
- MS-21337 - Plugs, Pipe, Aluminum.
- MS-21338 - Plugs, Pipe, Magnetic, Aluminum
- MS-21339 - Plugs, Pipe, Magnetic, Iron or Steel.
- MS-21343 - Boss Spacing-Hydraulic Design Standard for (No Superseding Document)
- MS-21344 - Fittings - Installation of Flared Tube, Straight, Threaded Connectors, Design Standard for
- MS-21345 - Fitting-Installation of Universal Elbow
- MS-21900 - Adapter, Flareless Tube To a Flared Tube (Superseded by SAE as-21900)
- MS-21901 - Adapter, Flareless Tube for 3/8 Bulkhead and Universal To an Flared Tube (Superseded by ms-21923)
- MS-21902 - Union, Flareless Tube (Superseded by SAE as-21902)
- MS-21903 - Union, Flareless Tube, 3/8 Bulkhead and Universal (Superseded by SAE as-21924)
- MS-21904 - Elbow, Flareless Tube, 90 Deg. (Superseded by SAE as-21904)
- MS-21905 - Tee, Flareless Tube (Superseded by SAE as-21905)
- MS-21906 - Cross, Flareless Tube (Superseded by SAE as-21906)
- MS-21907 - Elbow, Bulkhead Universal, 45 Deg., Flareless Tube (Superseded by SAE as-21907)
- MS-21908 - Elbow, Bulkhead Universal 90 Deg., Flareless Tube (Superseded by SAE as-21908)
- MS-21909 - Tee, Bulkhead and Universal, Flareless Tube (Superseded by SAE as-21909)
- MS-21910 - Tee, Bulkhead, Flareless Tube, Internal Thread on Side (Superseded by SAE as-21910)
- MS-21911 - Tee, Bulkhead, Flareless Tube, Internal Thread on Run (Superseded by SAE as-21911)
- MS-21912 - Tee, Flareless Tube With Bulkhead on Run (Superseded by SAE as-21912)
- MS-21913 - Plug, Flareless Tube
- MS-21914 - Cap, Pressure Seal, Flareless Tube Fitting (Superseded by SAE as-21914)
- MS-21915 - Adapter, Straight, Tube To Boss (Superseded by SAE as-21915)
- MS-21916 - Reducer, External Thread, Flareless Tube (Superseded by SAE as-21916)
- MS-21917 - Nut, Sleeve Coupling, Flareless H (No Superseding Document)
- MS-21918 - Sleeve - Coupling, Flareless
- MS-21920 - Clamp, Hose (Flat Band, 500 Deg. F) (Superseded by MIL-DTL-8783/1)
- MS-21921 - Nut, Sleeve Coupling, Flareless (Superseded by SAE as-21921)
- MS-21922 - Sleeve, Coupling, Flareless (Superseded by SAE as-21922)
- MS-21923 - Adapter, Flareless Tube, Bulkhead and Universal To Flared Tube (Superseded by SAE as-21923)
- MS-21924 - Union, Flareless Tube, Bulkhead and Universal (Superseded by SAE as-21924)
- MS-21925 - Elbow, 90 Degree Universal, Flareless Tube, High Profile (Asg) (Superseded by SAE as-21925)
- MS-21926 - Elbow, 90 Deg. Universal, Flareless Tube, Low Profile (Superseded by SAE as-21926)
- MS-21931 - Fitting Installation, Cluster
- MS-21932 - Fitting End, Bolt Cluster Fitting, Single Port
- MS-21933 - Fitting End, Bolt Cluster Fitting, Single Port Through, Flareless
- MS-21934 - Fitting End, Bolt Cluster Fitting, Double Port
- MS-21935 - Fitting End, Bolt Cluster Fitting, Double Port, Through, Flareless (Superseded by SAE as-21935)
- MS-21936 - CONTOUR and MOUNTING END, CLUSTER FITTING BODY, SEMI-FINISHED
- MS-21937 - Nut, Cluster Fitting, Retainer (Asg) (Superseded by SAE as-21937)
- MS-21938 - Bolt, Cluster Fitting, Single Port Flareless (Superseded by SAE as-21938)
- MS-21939 - Bolt, Cluster Fitting, Single Port, Through, Flareless (Superseded by SAE as-21939)
- MS-21940 - Bolt, Cluster Fitting, Double Port, Flareless (Superseded by SAE as-21940)
- MS-21941 - Bolt, Cluster Fitting, Double Port, Through, Flareless (Superseded by SAE as-21941)
- MS-21942 - Body, Cluster Fitting, One Way, Flareless (Superseded by SAE as-21942)
- MS-21943 - Body, Cluster Fitting, Two Way, 90 Deg., Flareless (Superseded by SAE as-21943)
- MS-21944 - Body, Cluster Fitting, Two Way, 180 Deg., Flareless (Superseded by SAE as-21944)
- MS-21945 - Body, Cluster Fitting, Three-Way, Flareless (Superseded by SAE as-21945)
- MS-21946 - Body, Cluster Fitting, One-Way, Internal Boss
- MS-21947 - Fitting End, Bolt Cluster Fitting Single Port Through, Flare
- MS-21948 - Fitting End, Bolt Cluster Fitting Double Port Through, Flare (No Superseding Document)
- MS-21949 - Bolt-Cluster Fitting, Single Port-Flare
- MS-21950 - Bolt, Cluster Fitting Single Port Through-Flare
- MS-21951 - Bolt-Cluster Fitting Double Port-Flare (No Superseding Document)
- MS-21952 - Bolt, Cluster Double Port Through, Flare
- MS-21953 - Body, Cluster Fitting, One-Way, Flare
- MS-21954 - Body, Cluster Fitting, Two-Way, 90 Degree, Flare
- MS-21955 - Body, Cluster Fitting, Two-Way 180 Deg., Flare
- MS-21956 - Body, Cluster Fitting Three Way, Flare (No Superseding Document)
- MS-21957 - Coupling, Quick-Disconnect, Low-Pressure Air Connection, Bulkhead Fitting End, 1/4 Tube Size (No Superseding Document)
- MS-21958 - Body, Cluster Fitting, Two-Way, 180 Degrees, Internal Boss
- MS-21959 - Body,Cluster Fitting, Two-Way, 90 Degrees, Internal Boss
- MS-21960 - Body, Cluster Fitting, Three-Way, Internal Boss
- MS-22064 - Clamp - Hose
- MS-24333 - Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect, Flared Fitting to Internal Thread Boss
- MS-24334 - Coupling Assembly, Hydraulic, Self-Sealing, Flareless Fitting to Internal Thread Boss
- MS-24335 - Flange, Bulkhead Mounting, Hydraulic, Self-Sealing Coupling
- MS-24385 - Fitting End, Flared Tube Connection, Precision Type, Standard Dimensions (Superseded by SAE as-4395)
- MS-24386 - Fitting End, Bulkhead Flared Tube Connection Precision Type, Standard Dimensions (Superseded by SAE as-4396)
- MS-24387 - Bolt, Fluid Passage, Precision Type (No Superseding Document)
- MS-24388 - Tee, Flared Tube, Internal Thread on Side, Precision Type (Superseded by SAE as-1031)
- MS-24389 - Tee, Tube, Internal Thread on Run, Precision Type (Superseded by SAE as-1032)
- MS-24390 - Tee, Flared Tube With Bulkhead on Run, Precision Type (Superseded by SAE as-1033)
- MS-24391 - Plug - Bleeder, Tube Precision Type (Superseded by SAE as-5169)
- MS-24392 - Nipple, Tube, Precision Type (Superseded by SAE as-5174)
- MS-24393 - Nipple, Tube, 3/8 Bulkhead, Precision Type (Superseded by SAE as-5406)
- MS-24394 - Elbow, Tube, Bulkhead, 90 Deg., Precision Type (Superseded by SAE as-1038)
- MS-24395 - Tee, Tube, Bulkhead, Precision Type (Superseded by SAE as-1039)
- MS-24396 - Elbow, Tube, Bulkhead, 45 Degrees, Precision Type
- MS-24397 - Reducer, Boss, Precision Type (Superseded by SAE as-5172)
- MS-24398 - Adapter, Straight, Tube To Boss, Precision Type (Superseded by SAE as-5173)
- MS-24399 - Reducer, Tube, Precision Type (Superseded by SAE as-5174)
- MS-24401 - Elbow, Tube, 90 Deg., Precision Type (Superseded by SAE as-1034)
- MS-24402 - Tee, Tube, Precision Type (Superseded by SAE as-1035)
- MS-24403 - Cross, Tube, Precision Type (Superseded by SAE as-1036)
- MS-24404 - Plug, Tube, Precision Type (Superseded by SAE as-5168)
- MS-24405 - Adapter, Flareless Tube To Flared Tube Precision Type (Superseded by SAE as-24405)
- MS-24475 - Nozzle, Pressure Lubricating Oil Servicing, Locking (Asg) (Superseded by MIL-DTL-25677/3)
- MS-24476 - Adapter, Pressure Lubricating Oil Servicing, Aircraft (Superseded by MIL-DTL-25677/1)
- MS-24480 - Cap - Lubrication Fitting, Protective, Pressure Servicing Adapter (Superseded by MIL-DTL-25677/2)
- MS-24487 - Nipple, Tube, 37 Deg To 45 Deg. Seat (Superseded by SAE as-933)
- MS-24518 - Elbow, Pipe to Hose, 45 Degrees Low Pressure
- MS-24519 - Elbow, Pipe to Hose: 90 Deg. Low Pressure
- MS-24520 - Mender, Hose (Low Pressure) (Superseded by A-A-52403)
- MS-24521 - Tee, Hose (Low Pressure) (Superseded by A-A-52405)
- MS-24522 - Adapter, Pipe To Hose, Straight Low Pressure (Superseded by SAE-J1231)
- MS-24529 - Cap, Lubrication Fitting, Protective
- MS-24587 - Adapter Assembly, Straight, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
- MS-24588 - Nipple, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 3/16 through 3/4 Inch Tubing Sizes
- MS-24589 - Nipple, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 1 through 2 Inches Tubing Sizes
- MS-24590 - Socket, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 3/16 through 3/4 Inch Tubing Sizes
- MS-24591 - Socket, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 1 through 2 Inches Tubing Sizes
- MS-24592 - Nut, Tube Coupling - Hose To Hose Reusable, Hydraulic, Pneumatic, Fuel and Oil Lines (No Superseding Document)
- MS-24651 - Elbow, Tube-90 Deg., Bulkhead, Flareless, Tube, Universal To Flared Tube (Superseded by SAE as-24651)
- MS-24652 - Elbow, Tube - 90 Deg., Bulkhead, Flared Tube, Universal To Flareless Tube (Superseded by SAE as-24652)
- MS-24653 - Elbow, Tube - 45, Bulkhead, Flared Tube Universal To Flareless Tube
- MS-24654 - Elbow, Tube - 45 Deg., Bulkhead, Flareless Tube Universal To Flared Tube (Superseded by SAE as-24654)
- MS-24688 - Sleeve-Retaining, Coupling, Pressure Fuel Servicing
- MS-25159 - Air Inlet, Axial, Generator (No Superseding Document)
- MS-26541 - Cartridge, Corrosion Inhibitor Drain (No Superseding Document)
- MS-26549 - Nipple, Quick Disconnect, 2-1/2 Inch, Pressure Fuel Servicing, Flange Type
- MS-26550 - Coupling, Quick Disconnect, 2-1/2 Inch Pressure Fuel Servicing, Nozzle To Hose
- MS-26552 - Nipple, Quick Disconnect, 2-1/2 Inch, Pressure Fuel Servicing, Open Flow, Wrench Type
- MS-26553 - Nipple, Quick Disconnect, 2-1/2 Inch Pressure Fuel Servicing With Check Valve, Wrench Type (No Superseding Document)
- MS-27019 - Coupling Assembly, Quick Disconnect, Cam-Locking Type (Superseded by A-A-59326)
- MS-27020 - Coupling Half, Quick Disconnect, Cam-Locking Type, Male, Internal Pipe Thread, Type I (Superseded by A-A-59326/1)
- MS-27021 - Coupling Half, Quick Disconnect, Cam-Locking Type (Superseded by A-A-59326/2)
- MS-27022 - Coupling Half, Quick Disconnect Cam-Locking Type, Male External Pipe Thread, Type Iii (Superseded by A-A-59326/3)
- MS-27023 - Coupling Half, Quick Disconnect, Cam-Locking Type, Male, Flanged, Type Iv (Superseded by A-A-59326/4)
- MS-27024 - Coupling Half, Quick Disconnect, Cam-Locking Type, Female, Internal Pipe Thread, Type V (Superseded by A-A-59326/5)
- MS-27025 - Coupling Half, Quick Disconnect, Cam-Locking Type, Female, Hose Shank, Type VI (Superseded by A-A-59326/6)
- MS-27026 - Coupling Half, Quick Disconnect, Cam-Locking Type, Female, External Pipe Thread, Type Vii (Superseded by A-A-59326/7)
- MS-27027 - Coupling Half, Quick Disconnect, Cam-Locking Type, Female, Flanged, Type Viii (Superseded by A-A-59326/8)
- MS-27028 - Coupling Half, Quick Disconnect, Cam-Locking Type, Cap, Dust, Type Ix (Superseded by A-A-59326/10)
- MS-27029 - Coupling Half, Quick Disconnect, Cam-Locking Type, Plug, Dust, Type X (Superseded by A-A-59326/11)
- MS-27030 - Gasket-Coupling Half, Quick Disconnect, Cam-Locking Type (Superseded by A-A-59326)
- MS-27031 - Coupling Half, Quick Disconnect, Cam-Locking Type, Drilling Template (Superseded by A-A-59326)
- MS-27053 - Adapter Assembly, Flared, Straight, Tube to Hose - with Swivel Nut
- MS-27054 - Adapter Assembly, Straight, Swivel Flange to Hose
- MS-27055 - Adapter Assembly, Flared, 45 Degrees Elbow, Tube to Hose - with Swivel Nut
- MS-27056 - Adapter Assembly, 45 Degrees Elbow, Swivel Flange to Hose
- MS-27057 - Adapter Assembly, Flared, 90 Degrees Elbow, Tube to Hose - with Swivel Nut
- MS-27058 - Adapter Assembly, 90 Degrees Elbow, Swivel Flange to Hose
- MS-27059 - Adapter Assembly, Flared, 45 Degrees Forged Elbow, Tube to Hose-with Swivel Nut
- MS-27060 - Adapter Assembly, Flared, 90 Degrees Forged Elbow, Tube to Hose-with Swivel Nut
- MS-27061 - Nipple Subassembly, Flared, Straight - with Swivel Nut
- MS-27062 - Nipple Subassembly, Straight, Swivel Flange
- MS-27063 - Elbow Subassembly, Flared, 45 Degrees, Swivel Nut
- MS-27064 - Elbow Subassembly, Swivel Flange, 45 Degrees
- MS-27065 - Elbow Subassembly, Flared, 90 Degrees, Swivel Nut
- MS-27066 - Elbow Subassembly, Swivel Flange, 90 Degrees
- MS-27067 - Elbow Subassembly, Flared, 45 Degrees Forged, Swivel Nut
- MS-27068 - Elbow Subassembly, Flared, 90 Degrees Forged, Swivel Nut
- MS-27069 - Socket, Hose Coupling
- MS-27070 - Sleeve, Hose Coupling
- MS-27071 - Union, Nipple
- MS-27072 - Wire, Retainer
- MS-27073 - Nut, Tube Coupling - Swivel (Superseded by SAE as-4370)
- MS-27074 - Wire, Retainer
- MS-27075 - Nipple, Flared, Tube to Hose - Swivel Nut
- MS-27076 - Nipple, Straight, Swivel Flange
- MS-27077 - Flange, Swivel, Retaining
- MS-27078 - Shoulder, Swivel Flange - Aluminum Alloy
- MS-27079 - Shoulder, Swivel Flange - Corrosion Resisting
- MS-27080 - Shoulder, Swivel Nut - Aluminum Alloy (No Superseding Document)
- MS-27081 - Shoulder, Swivel Nut - Corrosion Resisting (No Superseding Document)
- MS-27082 - Elbow, Nipple End, Swivel Flange to Hose-90 Degrees
- MS-27083 - Elbow, Tube - 90 Deg Corrosion Resisting
- MS-27084 - Elbow, Nipple End, Swivel Flange to Hose - 45 Degrees
- MS-27085 - Elbow, Tube - 45 Deg Corrosion Resisting
- MS-27086 - Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut
- MS-27087 - Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut
- MS-27088 - Nipple, Aluminum Alloy
- MS-27089 - Nipple, Corrosion Resisting
- MS-27223 - Nipple Assembly 90 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines 1/4 Inch through 2 Inch Tube Sizes
- MS-27224 - Swivel Nut Assembly 90 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines 1/4 Inch Through 2 1/2 Inch Tube Sizes
- MS-27225 - Nipple Assembly 45 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
- MS-27226 - Swivel Nut Assembly 45 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
- MS-27227 - Flange Nipple Assembly 90 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
- MS-27228 - Flange Assembly 90 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
- MS-27229 - Flange Nipple Assembly 45 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
- MS-27230 - Flange Assembly 45 Degrees, Adapter, Hose to Tube, Reusable, Fuel and Oil Lines
- MS-27231 - Straight Flange Nipple Assembly, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
- MS-27232 - Straight Flange Assembly Adapter, Hose to Flange, Reusable, Hydraulic, Fuel and Oil Lines
- MS-27233 - Nut, Swivel, Tube Coupling, Designed for Adapter, Hose To Tube, Reuseable, Hydraulic, Fuel and Oil Lines (Use ms-27073)
- MS-27234 - Elbow Tube, 90 Degrees
- MS-27235 - Elbow Tube, 45 Degrees
- MS-27236 - Shoulder - Designed for 45 Degrees and 90 Degrees Swivel Nut, Hose to Tube Adapters, Reusable, Hydraulic, Fuel and Oil Lines
- MS-27237 - Shoulder, Swivel Flange, Adapter, Hose to Tube, Hydraulic Fuel and Oil Lines, 1/2 Through 3 Inches Tubing Sizes
- MS-27238 - Wire, Nut Retaining, Designed for Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
- MS-27239 - Nipple, Straight, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 1/4 through 4 Inch Tube Sizes
- MS-27381 - Adapter, Assembly, Flareless, Straight, Tube to Hose - with Swivel Nut
- MS-27382 - Adapter Assembly, Flareless, 45 Degree Elbow, Tube to Hose-with Swivel Nut
- MS-27383 - Adapter Assembly, Flareless, 90 Degrees Elbow, Tube to Hose - with Swivel Nut
- MS-27384 - Adapter Assembly, Flareless, 45 Degrees Forged Elbow, Tube to Hose - with Swivel Nut
- MS-27385 - Adapter Assembly, Flareless, 90 Degrees Forged Elbow, Tube to Hose - with Swivel Nut
- MS-27386 - Nipple Subassembly, Flareless, Straight with Swivel Nut
- MS-27387 - Elbow Subassembly, Flareless, 45 Degrees, Swivel Nut
- MS-27388 - Elbow Subassembly, Flareless, 90 Degrees, Swivel Nut
- MS-27389 - Elbow Subassembly, Flareless, 45 Degrees Forged, Swivel Nut
- MS-27390 - Elbow Subassembly, Flareless, 90 Degrees, Forged, Swivel Nut
- MS-27391 - Nipple, Flareless, Tube to Hose - Swivel Nut
- MS-27392 - Shoulder, Swivel Nut, FLARELESS- Aluminum Alloy
- MS-27393 - Shoulder, Swivel Nut, FLARELESS- Corrosion
- MS-27394 - Elbow, Flareless, Tube to Hose - 90 Degrees Swivel Nut
- MS-27395 - Elbow, Flareless, Tube to Hose - 45 Degrees Swivel Nut
- MS-27404 - Adapter, Straight, Reusable, Tube to Hose, Low Pressure
- MS-27584 - Adapter, 1/4 Inch, Pneumatic Servicing, Usaf Ground Equipment To Raf Aircraft (No Superseding Document)
- MS-27585 - Adapter, Water Methanol Servicing, Usaf Ground Equipment To Raf Aircraft (No Superseding Document)
- MS-27586 - Adapter, Demineralized Water Servicing, Usaf Ground Equipment To Raf Aircraft (No Superseding Document)
- MS-27587 - Adapter, Engine Oil Servicing, Us Ground Equipment To Raf Aircraft (No Superseding Document)
- MS-27588 - Adapter, Nitrogen Servicing, Usaf Ground Equipment To Raf Aircraft (No Superseding Document)
- MS-27589 - Adapter, Oxygen Servicing, Usaf Ground Equipment To Raf Aircraft (No Superseding Document)
- MS-27590 - Adapter, 3/8 Inch, Hydraulic Servicing, Us Ground Equipment To Raf Aircraft (No Superseding Document)
- MS-27591 - Adapter, 1/4 Inch Hydraulic Servicing, Us Ground Equipment To Raf Aircraft (No Superseding Document)
- MS-27592 - Nipple, Adapter, Servicing, Us Ground Equipment To Raf Aircraft (No Superseding Document)
- MS-27593 - Nut, Adapter, Servicing, Us Ground Equipment To Raf Aircraft (No Superseding Document)
- MS-27594 - Adapter, Tire Inflating, Usaf Ground Equipment To Raf Aircraft (No Superseding Document)
- MS-27607 - Body, Nitrogen and Pneumatic Servicing Adapter, Us Ground Equipment To Raf Aircraft (No Superseding Document)
- MS-27608 - Adapter, 9-16 Inch Pneumatic Servicing, Us Ground Equipment To Raf Aircraft (No Superseding Document)
- MS-27616 - Adapter Assembly, Flared, Straight, Tube To Hose - With Swivel Nut
- MS-27617 - Adapter Assembly, Flared, 45 Degrees Elbow, Tube To Hose - With Swivel Nut
- MS-27618 - Adapter Assembly, Flared, 90 Degrees Elbow, Tube To Hose - With Swivel Nut
- MS-27619 - Nipple Sub Assembly, Flared, Straight - With Swivel Nut
- MS-27620 - Elbow Sub Assembly, Flared, 45 Degrees, Swivel Nut
- MS-27621 - Elbow Sub Assembly, Flared, 90 Degrees, Swivel Nut
- MS-27622 - Socket, Hose Coupling
- MS-27623 - Sleeve, Hose Coupling
- MS-27624 - Union, Nipple
- MS-27625 - Wire, Retainer
- MS-27626 - Nipple, Flared, Tube To Hose-Swivel Nut
- MS-27627 - Elbow, Flared, Tube To Hose, 90 Degrees, Swivel Nut
- MS-27628 - Elbow, Flared, Tube To Hose, 45 Degrees, Swivel Nut
- MS-27629 - Adapter Assembly, Flareless, Straight, Tube To Hose - With Swivel Nut
- MS-27630 - Adapter Assembly, Flareless, 45 Degrees Elbow, Tube To Hose - With Swivel Nut
- MS-27631 - Adapter Assembly, Flareless, 90 Degrees Elbow, Tube To Hose - With Swivel Nut
- MS-27632 - Nipple Sub Assembly, Flareless, Straight-with Swivel Nut
- MS-27633 - Elbow Sub Assembly, Flareless, 45 Degrees, Swivel Nut
- MS-27634 - Elbow Sub Assembly, Flareless, 90 Degrees, Swivel Nut
- MS-27635 - Nipple, Flareless, Tube To Hose, Swivel Nut
- MS-27636 - Elbow, Flareless, Tube To Hose, 90 Degrees, Swivel Nut
- MS-27637 - Elbow, Flareless, Tube To Hose, 45 Degrees, Swivel Nut
- MS-27638 - Mandrel Sleeve Setting
- MS-27639 - Disassembly Tool
- MS-27755 - Connector, Hose Quick Discounnect, Female, Anti 'g' Suit
- MS-27769 - Plug, Pipe, Countersink Hex Head
- MS-27850 - Fittings, Installation of Straight Threaded Fluid Connection (No Superseding Document)
- MS-27851 - Fitting, Assembly, Straight Threaded, Fluid Connection, 4000 Psi (No Superseding Document)
- MS-27852 - Nut, Cres, Fluid Connection Fitting, High Pressure (No Superseding Document)
- MS-27853 - Flange, Plain, Cres, Fluid Connection Fitting, High Pressure (No Superseding Document)
- MS-27854 - Flange, Threaded, Cres, Fluid Connection Fitting, High Pressure (No Superseding Document)
- MS-27855 - Seal, Cres, Nickel Plated, Fluid Connection Fitting, High Pressure (No Superseding Document)
- MS-27856 - Fitting Assembly, Straight Threaded, Fluid Connection, Low Pressure (No Superseding Document)
- MS-27857 - Nut, Aluminum, Fluid Connection Fitting, Low Pressure (No Superseding Document)
- MS-27858 - Flange, Plain, Aluminum, Fluid Connection Fitting, Low Pressure (No Superseding Document)
- MS-27859 - Flange, Threaded, Aluminum, Fluid Connection Fitting, Low Pressure (No Superseding Document)
- MS-27860 - Seal, Aluminum, Fluid Connection Fitting, Low Pressure (No Superseding Document)
- MS-27861 - Elbow 45 Deg., Aluminum, Fluid Connection Fitting, Low Pressure (No Superseding Document)
- MS-27862 - Elbow, 90 Deg., Aluminum, Fluid Connection Fitting, Low Pressure (No Superseding Document)
- MS-27863 - Tee, Aluminum, Fluid Connection Fitting, Low Pressure (No Superseding Document)
- MS-27864 - Cross, Aluminum, Fluid Connection Fitting, Low Pressure (No Superseding Document)
- MS-27865 - Elbow, 45 Deg., Cres, Fluid Connection Fitting, High Pressure (No Superseding Document)
- MS-27866 - Elbow, 90 Deg., Cres, Fluid Connection Fitting, High Pressure (No Superseding Document)
- MS-27867 - Tee, Cres, Fluid Connection Fitting, High Pressure (No Superseding Document)
- MS-27868 - Cross, Cres, Fluid Connection Fitting, High Pressure (No Superseding Document)
- MS-27987 - Coupling, Straight, Hose To Hose, Interval (Npsh) Swivel, Rocker Lug, To External (Npsh) (No Superseding Document)
- MS-27988 - Siamese Connection, Pipe To Hose, External (Npt) Single End, To Internal (Npsh) Siamese Swivel Ends, Rocker Lug (Use MIL-C-52404)
- MS-27989 - Coupling, Hose, (Water), Double Internal, Swivel, Rocker Lug, for Use With 1 1/2 Inch Water Hose (Use MIL-C-52404)
- MS-28740 - Fitting End - Hydraulic, Pneumatic, Fuel and Oil Hose (Superseded by ms-24587)
- MS-28742 - Fitting End - Hose, Swivel, Detachable, Flanged, 3 Bolt, Straight (No Superseding Document)
- MS-28743 - Fitting End, Swivel, Detachable, Flanged, 3 Bolt, 45 Deg. (Superseded by ms-28749)
- MS-28744 - Fitting End - Hose, Swivel, Detachable, Flanged, 3 Bolt, 90 Deg
- MS-28745 - Fitting End - Hose, Swivel, Detachable, Flanged, 4 Bolt, Straight
- MS-28746 - Fitting End - Hose, Swivel, Detachable, 45 Degrees Flange, 4 Bolt
- MS-28747 - Fitting End, Hose, Swivel, Detachable, Flanged, 4 Bolt, 90 Deg. (No Superseding Document)
- MS-28748 - Connector, Swivel Flange, Reuseable, Hose (Superseded by Ms 27232)
- MS-28749 - Elbow, Swivel Flange, 45 Deg., Reusable Hose (Superseded by ms-27230)
- MS-28750 - Elbow, Swivel Flanged, 90 Degree, Reusable, Hose (Superseded by ms-27228)
- MS-28752 - Fitting End, Self Sealing Fuel Hose, Swivel, Detachable (No Superseding Document)
- MS-28753 - Fitting End, Self-Sealing Fuel Hose, Swivel, Detachable, Flanged, Straight
- MS-28754 - Fitting End, Self-Sealing Fuel Hose, Swivel, Detachable, Flanged, 45 Degrees
- MS-28755 - Fitting End, Self-Sealing Fuel Hose, Swivel, Detachable, Flanged, 90 Degrees
- MS-28756 - Hose Assembly, Detachable End Fitting, Self Sealing Fuel (No Superseding Document)
- MS-28760 - Fitting End, Straight, Attachable, Hydraulic and Pneumatic, High Pressure Hose 3000 PSI, Flared Tube
- MS-28761 - Fitting End, Straight, Attachable, Hydraulic, High Pressure Hose 3000 PSI, Flareless Tube
- MS-28780 - Fitting End, 45 Degrees Elbow, Attachable, Hydraulic, High Pressure Hose 3000 PSI, Flared Tube
- MS-28781 - Fitting End, 90 Degrees Elbow, Attachable, Hydraulic, High Pressure Hose 3000 PSI, Flared Tube
- MS-29515 - Adapter, Pressure Fuel Servicing, Types A-1 and A-6
- MS-29522 - Plug, Hexagon Head, Oil Cooler
- MS-3102 - Connector, Receptacle, Electric, Box Mounting, Solder Contacts, an Type
- MS-33514 - Fitting End, Standard Dimensions for Flareless Tube Connection and Gasket Seal (Superseded by SAE as-33514)
- MS-33515 - Fitting End, Standard Dimensions for Bulkhead Flareless Tube Connections (Superseded by SAE as-33515)
- MS-33561 - Connection, Aircraft Ground Air Conditioning, 5 Inch
- MS-33562 - Connection, Aircraft Ground Air Conditioning, 8 Inch
- MS-33565 - Connections, Ground Leakage Test, Pressurized Cabin, Aircraft
- MS-33566 - Fittings, Installation of Flareless Tube, Straight-Threaded Connectors (Superseded by SAE as-33566)
- MS-33583 - Tubing End Double Flare, Standard Dimensions for (Superseded by SAE as-33583)
- MS-33584 - Tubing End Standard Dimensions for Flared (Superseded by SAE as-4330)
- MS-33649 - Bosses, Fluid Connection - Internal Straight Thread
- MS-33651 - Boss and Installations - Air Connection
- MS-33656 - Fitting End, Standard Dimensions for Flared Tube Connection and Gasket Seal (Superseded by SAE as-4395)
- MS-33657 - Fitting End, Standard Dimensions for Bulkhead Flared Tube Connection (Superseded by SAE as-4396)
- MS-33658 - Fitting End, Hose Connection, Standard Dimensions for (Superseded by SAE as-5132)
- MS-33660 - Tubing End, Hose Connection, Standard Dimensions for (Superseded by SAE as-5131)
- MS-33677 - Fitting End, Taper Pipe Thread, Standard Dimensions for (Superseded by SAE as-5201)
- MS-33740 - Nipple, Pneumatic Starting, 3 Inch Id
- MS-33786 - Fitting, Installation, Flared Tube and Hose, Swivel
- MS-35144 - Plug, Machine
- MS-35670 - Valve, Safety Relief
- MS-35746 - Coupling, Automotive: Air Brake Lines (Superseded by A-A-52484)
- MS-35755 - Cup, Oil, Lubricating, Ball Valve (Drive), Straight (Superseded by MIL-C-1258)
- MS-35758 - Cups, Grease, Manual Feed
- MS-35759 - Cup, Grease, Automatic Feed
- MS-35842 - Clamp, Hose (Low-Pressure) Type 'F' (Superseded by A-A-52506)
- MS-35867 - Connection End, Internal Flare, Refrigeration (Superseded by SAE-J513)
- MS-35868 - Connection, End, External Pipe Thread Refrigeration (Superseded by SAE-J513)
- MS-35869 - Adapter, Straight, Male, Refrigeration Pipe To Flared Tube (Superseded by SAE-J513)
- MS-35870 - Adapter, Refrigerant Cylinder, External Flarex Straight Pipe, Refrigeration (Superseded by SAE-J513)
- MS-35871 - Tee, Pipe To Tube, Refrigeration (Superseded by SAE-J513)
- MS-35872 - Flare Nut and Flare Seal Bonnet, Refrigeration (Superseded by SAE-J513)
- MS-35873 - Connection, End, External Flare, Refrigeration (Superseded by SAE-J513)
- MS-35917 - Elbow, Tube, 90 and 45 Degree, Solder- Joint, Refrigeration (Superseded by A-A-59442)
- MS-35918 - Adapter, Straight, Pipe Thread To Tube, Male Solder-Joint, Refrigeration (Superseded by A-A-59443)
- MS-35919 - Adapter, Straight, Pipe To Tube, External Flare To Female Solder-Joint, Refrigeration (Superseded by SAE-J513)
- MS-35920 - Reducer Coupling, Tube, Male To Female Solder-Joint, Refrigeration (Superseded by A-A-59444)
- MS-35921 - Adapter, Straight, Pipe To Tube, Pipe Thd To Female Solder-Joint, Refrigeration (Superseded by A-A-59445)
- MS-35922 - Elbow, Tube, 90 Degree, Reducing, Solder-Joint, Refrigeration (Superseded by A-A-59446)
- MS-35923 - Reducer Coupling, Tube, Female To Female Solder-Joint, Refrigeration (Superseded by A-A-59447)
- MS-35924 - Plug and Cap, Tube, Solder-Joint, Refrigeration (Superseded by A-A-59448)
- MS-35925 - Connection End, Solder-Joint, Refrigeration (Superseded by ASME/ANSI-B16.22)
- MS-35926 - Connection End, Internal Pipe Thread, Refrigeration (Superseded by SAE-J513)
- MS-35927 - Coupling, Tube, With Stop, Solder-Joint, Refrigeration (Superseded by A-A-59449)
- MS-35928 - Elbow, Tube, Street, 90 and 45 Degree, Solder-Joint, Refrigeration (Superseded by A-A-59450)
- MS-35929 - Tee, Tube, Straight, Solder Joint, Refrigeration (Superseded by A-A-59451)
- MS-39070 - Tee, Tube (Use an-804)
- MS-39071 - Plug, Machine Thread (Use an-806)
- MS-39133 - Adapter, Straight, Pipe to Hose-Automotive Air Brake Hose
- MS-39134 - Spring, Helical, Compression, Automotive Air Brake Hose Adapter
- MS-39135 - Nut, Hose Coupling, Automotive Air Brake Hose Adapter
- MS-39136 - Sleeve, Compression, Tube-Hose Fitting, Automotive Air Brake Hose Adapter
- MS-39137 - Adapter Body, Automotive Air Brake
- MS-39154 - Hose Assembly, Hydraulic and Pneumatic, High Pressure (3000 Psi) Flared Tube (Use ms-500083)
- MS-39155 - Adapter, Straight, Pipe To Hose - Male, Reusable (Superseded by SAE-J516)
- MS-39156 - Adapter, Straight, Tube To Hose - 37 Deg. Flare, Female, Reusable (No Superseding Document)
- MS-39157 - Nipple, Tube, 45 Deg. Flared Type, Automotive (Superseded by SAE-J512)
- MS-39158 - Adapter, Straight, Pipe To Tube, Male Pipe End, 45 Deg. Flare Type, Automotive (Superseded by SAE-J512)
- MS-39159 - Adapter, Straight, Pipe To Tube, Female Pipe End, 45 Deg. Flared Type, Automotive (Superseded by SAE-J512)
- MS-39160 - Elbow, Tube, 90 Deg., 45 Deg. Flared Type, Automotive (Superseded by SAE-J512)
- MS-39161 - Elbow, Pipe To Tube,90 Deg., Female Pipe End, 45 Deg. Flared Type, Automotive (Superseded by SAE-J512)
- MS-39162 - Elbow, Pipe To Tube, 90 Deg. Male Pipe End, 45 Deg. Flared Type, Automotive (Superseded by SAE-J512)
- MS-39163 - Tee, Pipe To Tube, Male Pipe on Branch, 45 Deg. Flared Type, Automotive (Superseded by SAE-J512)
- MS-39164 - Tee, Pipe To Tube Male Pipe on Run 45 Deg. Flared Type, Automotive (Superseded by SAE-J512)
- MS-39165 - Tee, Tube, 45 Deg. Flared Type, Automotive (Superseded by SAE-J512)
- MS-39166 - Nut, Tube Coupling, Short and Long 45 Deg. Flared Type, Automotive (Superseded by SAE-J512)
- MS-39167 - Nut, Tube, Coupling-Flared Type, Automotive, Long (Superseded by ms-39166)
- MS-39168 - Nipple, Tube - Tapered Sleeve (Compression) Type, Automotive (Superseded by SAE-J512)
- MS-39169 - Adapter, Straight, Pipe To Tube, Male Pipe End-Tapered Sleeve (Compression) Type, Automotive (Superseded by SAE J512)
- MS-39170 - Elbow, Tube, 90 Deg., Tapered Sleeve (Compression) Type, Automotive Superseded by SAE-J512)
- MS-39171 - Elbow, Pipe To Tube, 90 Deg., Male Pipe End-Tapered Sleeve (Compression) Type, Automotive (Superseded by SAE-J512)
- MS-39172 - Elbow, Pipe Totube, 90Degree, Female Pipe-End Tapered Sleeve (Compression) Type, Automotive (Superseded by SAE-J512)
- MS-39173 - Tee, Pipe To Tube, Male Pipe on Branch-Tapered Sleeve (Compression) Type, Automotive (Superseded by SAE- J512)
- MS-39174 - Tee, Tube-Tapered Sleeve (Compression) Type, Automotive (Superseded by SAE-J512)
- MS-39175 - Tee, Pipe To Tube, Male Pipe on Run-Tapered Sleeve (Compression) Type, Automotive (Superseded by SAE-J512)
- MS-39176 - Nut, Tube Coupling-Tapered Sleeve (Compression) Type, Automotive (Superseded by SAE-J512)
- MS-39177 - Sleeve, Compression, Tube Fitting-Tapered Sleeve (Compression) Type, Automotive (Superseded by SAE-J512)
- MS-39178 - Gross, Pipe To Tube, One Male Pipe End on Branch, for Air Lines- Spherical Sleeve
- MS-39179 - Adapter, Straight, Pipe To Tube, Male Pipe End, for Air Lines Spherical Sleeve (Superseded by SAE-J246)
- MS-39180 - Adapter, Tube, Male Pipe End, Long-for Air Lines (Superseded by ms-39179)
- MS-39181 - Adapter, Straight, Pipe To Tube, Female Pipe End, for Air Lines-Spherical Sleeve (Superseded by SAE-J246)
- MS-39182 - Elbow, Pipe To Tube, 90 Deg. Male Pipe End, for Air Lines-Spherical Sleeve (Superseded by SAE-J246)
- MS-39183 - Elbow, Tube, Male Pipe End, Long- for Air Lines (Superseded by ms-39182)
- MS-39184 - Elbow, Pipe To Tube, 90 Deg., Female Pipe End, for Air Lines-Spherical Sleeve (Superseded by SAE-J246)
- MS-39185 - Elbow, Pipe To Tube, 45 Deg., Male Pipe End, for Air Lines-Spherical Sleeve (Superseded by SAE-J246)
- MS-39186 - Elbow, Tube, 90 Deg., for Air Lines-Spherical Sleeve (Superseded by SAE-J246)
- MS-39187 - Nipple, Tube, for Air Lines-Spherical Sleeve (Superseded by SAE-J246)
- MS-39188 - Tee, Tube, for Air Lines -Spherical Sleeve (Superseded by SAE-J246)
- MS-39189 - Tee, Pipe To Tube, Female Pipe End on Run, Male Pipe End on Branch, for Air Lines, Spherical Sleeve (Superseded by SAE-J246)
- MS-39190 - Tee, Pipe To Tube, Male Pipe End on Branch, for Air Lines-Spherical Sleeve (Superseded by SAE-J246)
- MS-39191 - Tee, Pipe To Tube, Male Pipe End on Run, for Air Lines -Spherical Sleeve (Superseded by SAE-J246)
- MS-39192 - Tee, Tube, One Male and One Female Pipe End-for Air Lines
- MS-39193 - Tee, Pipe To Tube, Female Pipe End on Rwn, for Airlines, Spherical Sleeve (No Superseding Document)
- MS-39194 - Elbow, Tube, Female Pipe End, Right Side - for Air Lines
- MS-39195 - Elbow, Pipe To Tube-for Air Lines, Female Pipe End, Left Side
- MS-39196 - Nut Tube Coupling, Forair Lines-Spherical Sleeve (Superseded by SAE-J246)
- MS-39197 - Sleeve, Compression, Tube Fitting, for Air Lines-Spherical Sleeve (Superseded by SAE-J246)
- MS-39198 - Tees, Tube Safety Sleeve Compression Type
- MS-39199 - Nipple, Tube-Safety Sleeve Compression
- MS-39200 - Elbows, Tube - Safety Sleeve Compression Type, 90 Degree, Female Pipe End (User May Consult ms-51813 as a Possible Replacement)
- MS-39201 - Nipple, Tube-safety Sleeve Compression Type
- MS-39202 - Elbows, Pipe to Tube - Safety Sleeve Compression Type, 90 Degree, Male Pipe End
- MS-39203 - Adapters, Straight, Pipe To Tube Safety Sleeve Compression Type, Female Pipe End
- MS-39204 - Elbows, Pipe To Tube - Safety Sleeve Compression Type, 45 Degree, Male Pipe End (Users May Consult ms-51817 as a Possible Replacement)
- MS-39205 - Tees, Pipe To Tube-Safety Sleeve Compression Type, Male Pipe Side
- MS-39206 - Adapters, Straight, Pipe to Tube - Safety Sleeve Compression Type, Male Pipe End
- MS-39207 - Elbows, Tube - Safety Sleeve Compression Type, 90 Degree
- MS-39208 - Tees, Pipe To Tube Safety Sleeve Compression Type, Female Pipe Side
- MS-39209 - Tees, Pipe To Tube Safety Sleeve Compression Type Female Pipe End
- MS-39210 - Nuts, Tube Coupling - Safety Sleeve Compression Type
- MS-39211 - Tees, Pipe To Tube Safety Sleeve Compression Type, Male Pipe End
- MS-39212 - Sleeves, Compression, Tube-Hose Fitting-Safety Sleeve Type
- MS-39230 - Elbow, Pipe-Street, 90 Degrees (150 and 300 Lbs)
- MS-39231 - Elbow, Pipe Street, 45 Degrees., (150 and 300 Pounds)
- MS-39232 - Reducer, Pipe Right Hand Thread (150 and 300 Pounds)
- MS-39233 - Coupling, Pipe Straight (150 and 300 Pounds)
- MS-39282 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-on, 4 Bolt Split Flange, Straight, Single Wire Braid Hose (Superseded by MIL-F-52525/19)
- MS-39283 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-on, 4 Bolt Split Flange, 45 Deg. Bent Tube, for Ri Single Wire Braid Hose (Superseded by MIL-F-52525/20)
- MS-39284 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-on, 4 Bolt Split Flange, 90 Deg. Bent Tube, Short Drop, Single Wire Braid Hose (Superseded by MIL-F-52525/21)
- MS-39285 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-on, 4 Bolt Split Flange, 90 Deg, Bent Tube, Long Drop, Single Wire Braid Hose (Superseded by MIL-F-52525/22)
- MS-39286 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-on, 4 Bolt Split Flange, Straight, for R10 4 Spiral Wrap Hose (Superseded by MIL-F-52525/23 Now MIL-DTL-52525/23)
- MS-39287 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-on, 4 Bolt Split Flange, 45 Deg. Bent Tube, 4 Spiral Wrap Hose (Superseded by MIL-F-52525/24 Now MIL-DTL-52525/24)
- MS-39288 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Pressure Type, Clamp-on, 4 Bolt Split Flange, 90 Deg. Bent Tube, Short Drop, 4 Spiral Wrap Hose (Superseded by MIL-F-52525/25 Now MIL-DTL-52525
- MS-39289 - Coupling, Hose, Field Attachable (Reuseable) Hydraulic, Pressure Type, Clamp on, 4 Bolt Split Flange, 90 Deg, Bent Tube, Long Drop, for R-10 4 Spiral Wrap Hose (Superseded by MIL-F-52525/26)
- MS-39290 - Coupling, Hose, Field Attachable (Refuseable), Hydraulic, Screw on, Pressure Type, Female, Swivel, 37 Deg. Flare, Straight, Double Wire Braid Hose (Superseded by MIL-F-52525/1 Now MIL-DTL-52525/1)
- MS-39291 - Coupling, Hose, Field Attachable (Reusable), Hydraulic, Screw on, Pressure Type, Female, Swivel, 37 Deg. Flake, 45 Deg. Bent Tube, Double Wire Braid Hose (Use MIL-F-52525/2)
- MS-39292 - Coupling Hose, Field Attachable (Reuseable), Hydraulic Screw on, Pressure Type, Female Swivel, 37 Deg. Flare 90 Deg. Bent Tube, Short Drop for R 2 Double Wire Braid Hose (Use MIL-F-52525/3)
- MS-39293 - Coupling, Hose, Field Attachable (Reuseable, Swivel, 37 Deg. Flare, 90 Deg. Bent Tube, Long Drop, Double Wire Braid Hose (Superseded by MIL-F-52525/4 Now MIL-DTL-52525/4)
- MS-39294 - Clamp Half, Hydraulic, 4 Bolt Split Flange Type, 0 To 4,000 Psi Pressure and Suction Line (Superseded by MIL-F-52525/16, Now MIL-DTL-52525/16)
- MS-39295 - Clamp Half, Hydraulic, 4-Bolt Split Flange Type, 4,500, and 5,000 Psi (No Superseding Document)
- MS-39296 - Connections, Flange To Port for Hydraulic Hose Couplins, 4 Bolt Split Flane Type (Superseded by MIL-F-52525/17 Now, MIL-DTL-52525/17)
- MS-39307 - Coupling, Hose, Reusable, Hydraulic, Oil Suction, 2-Bolt Clamp-on, Straight (No Superseding Document)
- MS-39308 - Coupling, Hose, Reusable, Hydraulic, Oil Suction, 2-Bolt Clamp-on, 45 Deg. Bent Tube (No Superseding Document)
- MS-39309 - Coupling, Hose, Reusable, Hydraulic, Oil Suction, 2-Bolt Clamp-on, 90 Deg. Bent Tube (No Superseding Document)
- MS-39312 - FLANGE HEAD HYDRAULIC, 4 BOLT SPLIT FLANGE TYPE HOSE CONNECTION, 0 TO 2,000, 2,500 and 3,000 PSI (SUPERSEDED BY SAE-J518)
- MS-39313 - Flange Head, Hydraulic, 4 Bolt Split Flange Type Hose Connection, 3,000 To 6,000 Psi (Superseded by SAE-J518)
- MS-39314 - PORT, MOUNTING FACE DIMENSIONS HYDRAULIC, 4 BOLT SPLIT FLANGE TYPE HOSE and TUBE CONNECTIONS, 0 TO 2,000, 2,500, and 3,000 PSI (SUPERSEDED BY SAE-J518)
- MS-39315 - PORT, MOUNTING FACE DIMENSIONS HYDRAULIC, 4 BOLT SPLIT FLANGE TYPE HOSE and TUBE CONNECTIONS, 3,000 TO 6,000 PSI (SUPERSEDED BY SAE-J518)
- MS-39321 - Fitting, Flared, Tube, 37-Degree, Steel (Superseded by MIL-F-18866)
- MS-39322 - Adapter: 37 Degree Flare, Female Swivel to Weld Socket, 3/4 Inch to 1 Inch
- MS-39323 - Fitting, Tube, Reducer: 37 Degree Flare
- MS-39324 - Adapter, 37 Degree, Flare to 'O' Ring Boss, 45 Degree Flare
- MS-39326 - Clamp, Spring: Hose (Low Pressure) Type 'E' (Superseded by SAE-J536)
- MS-39336 - Y Connection, Quick Disconnect, Cam-Locking Type, Flange, Type Xx (Superseded by A-A-59326/20)
- MS-39337 - Coupling, Hose, Field Attachable (Reuseable) Hydraulic, Pressure Type, Clamp on, 4 Bolt Split Flange, Straight, Double Wire Braid Hose (Superseded by MIL-F-52525/27)
- MS-39338 - Coupling, Hose, Field Attachable (Reuseable) Hydraulic, Pressure Type, Clamp on, 4 Bolt Split Flange, 45 Deg, Bent Tube, Double Wire Braid Hose (Superseded by MIL-F-52525/28)
- MS-39339 - Coupling, Hose, Field Attachable (Reuseable) Hydraulic, Pressure Type, Clamp on, 4 Bolt Split Flange, 90 Deg, Bent Tube, Short Drop, Double Wire Braid Hose (Superseded by MIL-F-52525/29)
- MS-39340 - Coupling, Hose, Field Attachable (Reuseable) Hydraulic, Pressure Type, Clamp on, 4 Bolt Split Flange, 90 Deg. Bent Tube, Long Drop Double Wire Braid Hose (Superseded by MIL-F-52525/30)
- MS-39341 - Coupling, Hose, Field Attachable, (Refuseable), Hydraulic, Screw on, Pressure Type, Female, Swivel, 37 Deg. Flare, Straight, Single Wire Braid Hose (Superseded by MIL-F-52525/5, Now MIL-DTL-52525/5)
- MS-39342 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Screw on, Pressure Type, Female, Swivel, 37 Deg. Flare, Straight, Four Spiral Wrap Hose (Superseded by MIL-F-52525/9)
- MS-39343 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Screw on, Pressure Type, Female, Swivel, 37 Deg. Flare, Straight, Six Spiral Wrap Hose (No Superseding Document)
- MS-39344 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Screw on Pressure Type, Female, Swivel, 37 Deg. Flare, 45 Deg. Bent Tube, Single Wire Braid Hose (Superseded by MIL-F-52525/6, Now MIL-DTL-52525/6)
- MS-39345 - Coupling, Hose, Field Attachable (Reuseable) Hydraulic, Screw on, Pressure Type, Female, Swivel, 37 Deg. Flare, 90 Deg. Bent Tube, Short Drop, Single Wire Braid Hose (Superseded by MIL-F-52525/7, Now MIL-DTL-52525/7)
- MS-39346 - Coupling, Hose, Field Attachable (Reuseable), Hydraulic, Screw on, Pressure Type, Female Swivel, 37 Deg. Flare, 90 Deg. Bent, Long Drop, Single Wire Braid Hose (Superseded by MIL-F-52525/8, Now MIL-DTL-52525/8)
- MS-39352 - Adapter Male by Male Quick Disconnect, Cam-Locking Type, Type Xxi (Superseded by A-A-59326/21)
- MS-39353 - Adapter, Straight, Flange To Hose, Field Attachable (Reusable), Hydraulic, Pressure Type, Screw on, 4 Bolt Split Flange, Four Spiral Light Wire Reinforcement Hose (No Superseding Document)
- MS-39354 - Elbow, Flange To Hose, Field Attachable (Reusable), Hydraulic, Pressure Type, Screw-on, 4-Bolt Split Flange, 45 Degrees Bend, Four Spiral Light Wire Reinforcement Hose
- MS-39355 - Elbow, Flange To Hose Attachable (Reusable), Hydraulic, Pressure Type, Screw on, 4 Bolt Split Flange, 90 Deg. Bend, Short Drop, Four Spiral Light Wire Reinforcement Hose (No Superseding Document)
- MS-39356 - Elbow, Flange To Hose, Field Attachable (Reusable) Hydraulic, Pressure Type, Screw-on, 4-Bolt Split Flange, 90 Degrees Bend, Long Drop, Four Spiral Light Wire Reinforcement Hose (No Superseding Document)
- MS-39357 - Adapter, Straight, Tube To Hose, Field Attachable (Reusable), Hydraulic, Screw-on Pressure Type, Female, Swivel, 37 Deg.Flare, Four Spiral Light Wire Reinforcement Hose (Superseded by MIL-F-52525/18)
- MS-39358 - Elbow, Tube To Hose, Field Attachable (Reusable), Hydraulic, Screw on, Pressure Type, Female, Swivel, 37 Deg. Flare, 90 Deg. Bend, Short Drop, Four Spiral Light Wire Reinforcement Hose (No Superseding Document)
- MS-39359 - Elbow, Tube To Hose, Field Attachable (Reusable), Hydraulic, Screw on, Pressure Type, Female, Swivel, 37 Deg. Flare, 90 Deg. Bend, Short Drop, Four Spiral Light Wire Reinforcement Hose (No Superseding Document)
- MS-39360 - Elbow, Tube To Hose, Field Attachable (Reusable) Hydraulic, Screw-on, Pressure Type, Female Swivel, 37 Degrees Flare, 90 Degrees Bend, Long Drop, Four Spiral Light Wire Reinforcement Hose (No Superseding Document)
- MS-49000 - Reducer, Male by Female and Female by Male Quick Disconnect, Cam-Locking Type Xi (Superseded by A-A-59326/12)
- MS-49001 - Reducer, External Pipe Thread by Quick Disconnect, Cam-Locking Type, Male, Type Xii (Superseded by A-A-59326/13)
- MS-49002 - Reducer, External Pipe Thread by Quick Disconnect, Cam-Locking Type, Female, Type Xiii (Superseded by A-A-59326/14)
- MS-49003 - Y Connection, Quick Disconnect, Cam-Locking Type, Male-Female-Flange, Type Xiv (Superseded by ms-27023, ms-27027 and ms-39336)
- MS-49005 - Plug, Pipe Headless, Aluminum, Iron or Steel (Use WW-P-471)
- MS-49006 - Plug, Pipe, Magnetic-Headless, Aluminum, Iron or Steel (Superseded by A-A-59432)
- MS-49008 - Tee, Tube, Flare Connection, Refrigeration (Superseded by SAE-J513)
- MS-51500 - Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Adapter, Straight, Pipe to Tube, Male End, 37 Degree Flared
- MS-51501 - Nipple Tube, Regular Hex, 37 Degree Flared, Short
- MS-51502 - Nipple Tube, Regular Hex, 37 Degree Flared, Long
- MS-51503 - Adapter, Straight, Pipe to Tube, Female Pipe End, 37 Degree Flared
- MS-51504 - Elbow, Pipe to Tube, 90 Degree Male Pipe End, 37 Degree Flared
- MS-51505 - Elbow, Tube, 90 Degree 37 Degree Flared
- MS-51506 - Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Elbow, Pipe to Tube, 90 Degree, Female Pipe End, 37 Degree Flared
- MS-51507 - Elbow, Tube, 90 Degree, 37 Degree Bulkhead, Flared
- MS-51508 - Elbow, Pipe to Tube, 45 Degree, Male Pipe End, 37 Degree Flared
- MS-51509 - Elbow, Tube, 45 Degree, Bulkhead, 37 Degree Flared
- MS-51510 - Tee, Tube, 37 Degree Flared
- MS-51511 - Tee, Pipe to Tube, Male Pipe on Run, 37 Degree Flared
- MS-51512 - Tee, Pipe to Tube, Male Pipe on Branch, 37 Degree Flared
- MS-51513 - Tee, Pipe to Tube, Female Pipe on Branch, 37 Degree Flared
- MS-51514 - Tee, Pipe to Tube, Female Pipe on Run 37 Degree Flared
- MS-51515 - Tee, Tube, Bulkhead on Branch, 37 Degree Flared
- MS-51516 - Tee, Bulkhead on Run 37 Degree Flared
- MS-51517 - Cross, Tube 37 Degree Flared
- MS-51518 - Plug, Machine Thread 37 Degree Flared
- MS-51519 - Nipple, Tube, Large Hex for Use with O-Ring, 37 Degree Flared
- MS-51520 - Nipple, Tube, Bulkhead 37 Degrees Flared
- MS-51521 - Elbow, Tube, 90 Degree, Swivel, 37 Degree, Flared
- MS-51522 - Elbow, Tube, 45 Degree Swivel, 37 Degree Flared
- MS-51523 - Tee, Tube to Swivel, Swivel on Run, 37 Degree Flared
- MS-51524 - Tee, Tube to Swivel, Swivel on Branch, 37 Degree Flared
- MS-51525 - Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Steel; Adapter, Straight, Tube to Boss, O-Ring, 37 Degree Flared (use SAE-J514)
- MS-51526 - Adapter, Straight, Tube to Boss, O Ring, 37 Degrees Flared (Long) (use SAE-J514)
- MS-51527 - Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Elbow, Tube to Boss, 90 Degree, O-Ring, 37 Degree Flared (use SAE-J514)
- MS-51528 - Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Elbow, Tube to Boss, 45 Degree, O-Ring, 37 Degree Flared (use SAE-J514)
- MS-51529 - Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Tee, Tube to Boss, Boss on Branch, O-Ring, 37 Degree Flared (use SAE-J514)
- MS-51530 - Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Tee, Tube to Boss on Run, O-Ring, 37 Degree Flared (use SAE-J514)
- MS-51531 - Nut, Tube Coupling, 37 Degrees Flared (use SAE-J514)
- MS-51532 - Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Steel; Cap, Tube, 37 Degree Flared (use SAE-J514)
- MS-51533 - Sleeve, Compression, Tube Fitting, 37 Degrees Flared (use SAE-J514)
- MS-51534 - Reducer, Tube, 37 Degrees Flared (use SAE-J514)
- MS-51811 - Tee, Tube, Flareless Type, Hydraulic (use SAE-J514)
- MS-51812 - Nipple, Tube, Bulkhead, Flareless Type, Hydraulic (use SAE-J514)
- MS-51813 - Elbow, Pipe To Tube, 90 Deg., Female Pipe End, Flareless Type, Hydraulic (Use SAE-J514)
- MS-51814 - Nipple, Tube, Regular Hex, Flareless Type, Hydraulic (use SAE-J514)
- MS-51815 - Elbow, Pipe to Tube, 90 Degrees, Male Pipe End, Flareless Type, Hydraulic (use SAE-J514)
- MS-51816 - Adapter, Straight, Pipe to Tube, Female Pipe End, Flareless Type, Hydraulic (use SAE-J514)
- MS-51817 - Elbow, Pipe to Tube, 45 Degrees, Male Pipe End, Flareless Type, Hydraulic (use SAE-J514)
- MS-51818 - Tee, Pipe to Tube, Male Pipe on Branch, Flareless Type, Hydraulic (use SAE-J514)
- MS-51819 - Adapter, Straight, Pipe to Tube, Male Pipe End, Flareless Type, Hydraulic (use SAE-J514)
- MS-51820 - Elbow, Tube, 90 Degrees, Flareless Type, Hydraulic (use SAE-J514)
- MS-51821 - Tee, Pipe to Tube, Female Pipe on Branch, Flareless Type, Hydraulic (use SAE-J514)
- MS-51822 - Tee, Pipe to Tube, Female Pipe on Run, Flareless Type, Hydraulic (use SAE-J514)
- MS-51823 - Nut, Tube, Coupling, Flareless Type, Hydraulic (use SAE-J514
- MS-51824 - Tee, Pipe to Tube, Male Pipe on Run, Flareless Type, Hydraulic (use SAE-J514)
- MS-51825 - Sleeves, Clinches, Tube Fitting, Flareless Type, Hydraulic
- MS-51839 - Elbow, Tube to Boss, 90 Degrees, O-Ring, Flareless Type, Hydraulic (use SAE-J514)
- MS-51841 - Tee, Tube to Boss, Boss on Bench, O-Ring, Flareless Type, Hydraulic
- MS-51842 - Elbow, Tube to Boss 45 Degrees, O-Ring, Flareless Type, Hydraulic
- MS-51843 - Adapter, Straight, Tube to Boss, O-Ring, Flareless Type, Hydraulic (use SAE-J514)
- MS-51845 - Elbows, Pipe, Brass or Bronze, Threaded, 90-Degree, Straight, Class 125
- MS-51846 - Nipple, Pipe, Standard, Brass or Copper (Superseded by ASTM-B687)
- MS-51847 - Bushing, Pipe, Shoulder (Use ms-14315)
- MS-51852 - Elbow, Tube to Swivel, 90 Degrees, Flareless Type, Hydraulic (use SAE-J514)
- MS-51853 - Tee, Tube to Swivel, Swivel on Branch, Flareless Type, Hydraulic (use SAE-J514)
- MS-51854 - Tee, Tube to Swivel, Swivel on Run, Flareless Type, Hydraulic (use SAE-J514)
- MS-51855 - Elbow, Tube, 90 Degrees, Bulkhead, Flareless Type, Hydraulic (use SAE-J514)
- MS-51856 - Nipple, Tube, Large Hex, O-Ring, Flareless Type, Hydraulic (use SAE-J514)
- MS-51860 - Locknut, Bulkhead, 37 Degrees Flared and Flareless Type, Hydraulic (use SAE-J514)
- MS-51872 - Nipple, Pipe, Extra Strong, Brass or Copper (Superseded by ASTM-B687)
- MS-51873 - Nipple, Pipe, Extra Strong Steel
- MS-51874 - Inverted Nut, Tube Coupling, Flare Type (Superseded by SAE J512)
- MS-51875 - Adapter, Straight, Pipe To Tube, Male Pipe End, Inverted Flare Type (Superseded by SAE-J512)
- MS-51876 - Adapter, Straight, Pipe To Tube, Female Pipe End, Inverted Flare Type (Superseded by SAE-J512)
- MS-51877 - Nipple, Tube, Inverted Flare Type (Superseded by SAE-J512)
- MS-51878 - Elbow, Pipe To Tube, 45 Degree, Male Pipe End, Inverted Flare Type (Superseded by SAE-J512)
- MS-51879 - Elbow, Pipe To Tube; 90 Degree, Male Pipe End, Inverted Flare Type (Superseded by SAE-J512)
- MS-51880 - Tee, Tube; Inverted Flare Type (Superseded by SAE-J512)
- MS-51881 - Tee, Pipe To Tube; Male Pipe on Run, Inverted Flare Type (Superseded by SAE-J512)
- MS-51882 - Tee, Pipe To Tube; Female Pipe-on Branch, Inverted Flare Type (Superseded by SAE-J512)
- MS-51883 - Tee, Pipe To Tube; Male Pipe-on Branch, Inverted Flare Type (Superseded by SAE-J512)
- MS-51884 - Plug, Pipe Square Head, Aluminum, Iron or Steel (Use WW-P-471)
- MS-51885 - Plug, Pipe, Bar or Slotted, Aluminum, Iron or Steel (Use WW-P-471)
- MS-51886 - Locknut, Cast Iron, Malleable Iron or Steel (Superseded by WW-P-471)
- MS-51887 - Bushing, Pipe Aluminum, Iron or Steel (Superseded by WW-P-471)
- MS-51888 - Locknut, Adjustable, 37 Degrees Flared and Flareless Type, Hydraulic (use SAE-J514)
- MS-51889 - Washer, Back-up, 37 Degrees Flared and Flareless Type, Hydraulic (use SAE-J514)
- MS-51890 - Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Steel; Cap Assembly, Tube, Flareless Type, Hydraulic (use SAE-J514)
- MS-51891 - Plug, Tube Fitting, Threaded, Flareless Type, Hydraulic (use SAE-J514)
- MS-51892 - Tee, Tube to Boss, Boss on Run, O-Ring, Flareless Type, Hydraulic (use SAE-J514)
- MS-51893 - Adapter, Straight, Tube to Boss, Long, O-Ring, Flareless Type, Hydraulic (use SAE-J514)
- MS-51894 - Cross, Tube, Flareless Type, Hydraulic (use SAE-J514)
- MS-51895 - Reducer, Tube, Large Hex, O-Ring, Flareless Type, Hydraulic (use SAE-J514)
- MS-51952 - Elbows, Pipe, Brass or Bronze, Threaded, 90-Degree, Street, Class 125
- MS-51953 - Nipple, Pipe, Standard Steel (Superseded by ASTM-a733)
- MS-51954 - Tee, Pipe-Reducing (150 Pounds) (No Superseding Document)
- MS-70088 - Adapter, 45 Deg., Female Thread Swivel Collar, Quick Disconnect, Cam Locking, Male (Tank) (Superseded by A-A-59326/15)
- MS-70091 - Coupling Half, Quick Disconnect, Cam Locking Type, Female, Flanged, Type Viii, (for D-1 Nozzle-Aircraft) (Superseded by A-A-59326/9)
- MS-70095 - Coupling Half, Quick Disconnect, Cam-Locking Type, Male, Internal Straight Threads, Type Xvii (for Use With Nato Equipment) (Superseded by A-A-59326/17)
- MS-70096 - Coupling Half, Quick Disconnect, Cam-Locking Type, Female, External Straight Threads, Type Xvi (for Use With Nato Equipment) (Superseded by A-A-59326/16)
- MS-70097 - Coupling Half, Quick Disconnect, Cam-Locking Type, Female Reducer (Internal Pipe Thread) Type Xviii (Superseded by A-A-59326/18)
- MS-70100 - Coupling Half, Quick Disconnect, Cam-Locking Type, Nipple Adapter, Male by External Grooved Pipe, Type Xix (Superseded by A-A-59326/19)
- MS-87018 - Fitting, Flared, Swivel Nut, Straight, Medium Pressure Hose (Superseded by MIL-F-83798/1, Now MIL-DTL-83798/1)
- MS-87019 - Fitting, Flared, Swivel Nut, 45 Degrees Medium Pressure Hose (Use MIL-F-83798/2)
- MS-87020 - Fitting, Flared, Swivel Nut, 90 Deg. Medium Pressure Hose (Superseded by MIL-F-83798/3, Now MIL-DTL-83798/3)
- MS-87021 - Fitting, Flareless, Swivel Nut, Straight, Medium Pressure Hose (Superseded by MIL-F-83798/4, Now MIL-DTL-83798/4)
- MS-87022 - Fitting, Flareless, Swivel Nut, 45 Deg., Medium Pressure Hose (Superseded by MIL-F-83798/5, Now MIL-DTL-83798/5)
- MS-87023 - Fitting, Flareless, Swivel Nut, 90 Degrees, Medium Pressure Hose (Superseded by MIL-F-83798/6, Now MIL-DTL-83798/6)
- MS-87024 - Fitting, Swivel Flange, Straight, Medium Pressure Hose (Superseded by MIL-F-83798/7, Now MIL-DTL-83798/7)
- MS-87025 - Fitting, Swivel Flange, 45 Deg., Medium Pressure Hose (Superseded by MIL-F-83798/8, Now MIL-DTL-83798/8)
- MS-87026 - Fitting, Swivel Flange, 90 Deg., Medium Pressure Hose (Superseded by MIL-F-83798/9, Now MIL-DTL-83798/9)
- MS-9016 - Bushing - Screw, Plain (Asg) (No Superseding Document)
- MS-90385 - Coupling Assembly, Self Sealing, Quick Disconnect, Hydraulic (Water Based Hydraulic Fluid) (No Superseding Document)
- MS-90520 - Flanges, Cast Iron (Class 125 and 250) and Bronze (150 and 300 Lb) (Superseded by WW-F-406)
- MS-90521 - Union, Pipe, Steel or Malleable Iron, Threaded Connection (Superseded by WW-U-531)
- MS-90522 - Elbow, Cast-Iron Threaded Drainage (No Superseding Document)
- MS-90523 - Tees, Y-Branches, Crosses, Cast Iron Threaded Drainage (No Superseding Document)
- MS-90524 - Y-Branches, 90 Deg. Reducing, Cast Iron Threaded Drainage (No Superseding Document)
- MS-90525 - Y BRANCHES, 45 DEG., STRAIGHT and REDUCING, CAST IRON THREADED DRAINAGE (NO SUPERSEDING DOCUMENT)
- MS-90526 - Coupling, Increasers, Offsets, Cast-Iron Threaded Drainage (No Superseding Document)
- MS-90527 - Y-Branch, Tucker and Roof Connections, Cast-Iron Threaded Drainage (No Superseding Document)
- MS-90528 - Trap, P-Bath and Running, Cast Iron Threaded Drainage (No Superseding Document)
- MS-9082 - Sleeve, Swivel-Piloted O-Ring, Tube Connection, Brazing, AMS 5645 (No Superseding Document)
- MS-9083 - Collar, Swivel-Piloted O-Ring, Tube Connection, 3 Bolt, AMS 6322 (Asg)
- MS-9084 - Collar, Swivel-Piloted O-Ring, Tube Connection, 4 Bolt, AMS 6322 (Asg)
- MS-9085 - Collar, Swivel-Piloted O-Ring, Tube Connection, 6 Bolt, AMS6322
- MS-9095 - Nipple, Tube - Aluminum, Boss
- MS-9096 - Elbow, Tube - AMS 4135, Boss, 90 Deg.
- MS-9097 - Elbow, Tube - AMS 4135, Boss, 45 Deg.
- MS-9098 - Tee, Tube - AMS 4135, Boss (No Superseding Document)
- MS-91600 - Nut, Tube Coupling, Series Lc Connectors (Superseded by Reb-10027)
- MS-9193 - Nipple, Tube - SAE-AMS5639, Boss
- MS-9194 - Elbow, Tube - SAE AMS-5646, Boss, 90 Degrees
- MS-9195 - Elbow, Tube - SAE AMS-5639, Boss, 45 Degrees
- MS-9196 - Tee, Tube - SAE-AMS5646, Boss
- MS-9197 - Nut, Tube Coupling-CRES SAE-AMS5646, Silver Plate
- MS-9198 - Nut, Tube Coupling-CRES SAE-AMS5646
- MS-9199 - Nut, Tube Coupling-Aluminum, AMS 4121 (No Superseding Document)
- MS-9225 - Ferrule, Brazing, Tube Fitting - Cres, AMS 5646
- MS-9313 - Cap, Tube - AMS 5646
- MS-9314 - Cap Assembly, Tube - SAE-AMS5646
- MS-9315 - Cap Assembly, Tube - SAE-AMS5646, Silver Plated Nut
- MS-9378 - Collar, Swivel-Piloted O-Ring, Tube Connection, 2 Bolt, Cres Steel (No Superseding Document)
- MS-9381 - Coupling, Tube-Brazing, SAE AMS 5646
- MS-9382 - Tee, Tube - Brazing, AMS 5646
- MS-9383 - Union, Tube - Aluminum AMS 4121, Conical End, Connector (No Superseding Document)
- MS-9405 - Plug, Machine Thread-AMS 5646, Metal Gasket, Silver Plated, MIL-S-8879 Thread
- MS-9483 - Ferrule, Brazing, Tube Fitting-Cres SAE-AMS5646, Straight
- MS-9769 - Reducer, Tube - Straight, Tube to Boss
- MS-9879 - Sleeve, Swivel-Piloted O-Ring Tube Connection, Brazing, AMS 5046
- MS-9901 - Plug, Machine Thread - AMS 5646, Preformed Packing, MIL-S-8879 Thread
- MS-9902 - Plug, Machine Thread - Drilled, AMS 5646, Preformed Packing, MIL-S-8879 Thread (Superseded by SAE as-9902)
- MS-9953 - Plug, Machine Thread - Ams 4121, Preformed Packing Mil-S-8879 Thread
- MS-9954 - Plug, Machine Thread-Drilled, AMS 4121, Preformed Packing, MIL-S-8879 Thread
- MSS-SP-79 - Socket Welding Reducer Inserts
- NAS-1001 - Tube-End Standard Dimensions for Outside Double Flare
- NAS-1236 - Bolt - Universal, Tube End - Flareless
- NAS-1237 - Elbow - Universal 90 Deg. - Flareless
- NAS-1240 - Tee - Universal - Flareless
- NAS-1410 - Nut, Universal Port Fitting
- NAS-1564 - Reducer, Flared Tube
- NAS-1760 - Fitting End, Flareless Acorn, Standard Dimensions For
- NAS-1761 - Elbow, Reducer, 45 Degrees, Flareless Tube To Swivel
- NAS-1762 - Elbow Reducer, 90 Degrees, Flareless Tube To Swivel
- NAS-1763 - Tee, Reducer, Flareless Tube To Swivel, Swivel on Run
- NAS-1764 - Tee, Reducer, Flareless Tube To Swivel, Swivel on Side
- NAS-1922 - Clamp, Hose, Band, Tangential Worm, Light Weight
- NAS-1923 - Clamp, Hose, Band, Tangential Worm, Light Weight
- NAS-1924 - Clamp, Hose
- NAS-1925 - Clamp, Hose
- NAS-397 - Clamp, Ratchet, One Piece
- NAS-398 - Clamp, Ratchet, Three Piece
- NAS-424 - Coupling, Tube, Flared Fitting, Female Thread
- NAS-497 - Fitting - Lubricator 1/8 Inch Drive, Flush Type
- NAS-516 - Fitting, Lubrication, .1250 Inch Drive, Flush Type
- NAS-550 - Fitting, Installation of Universal Elbow
- NAS-551 - Bolt, Universal Fitting
- NAS-552 - Elbow, Universal, 90 Degrees
- NAS-553 - Elbow, Universal, 15 Degrees
- NAS-554 - Elbow, Universal, 45 Degrees
- NAS-555 - Tee, Universal
- NAS-591 - Coupling, Rigid Tube Connector, Aluminum
- NAS-592 - Ring, Rigid Tube Connector, Aluminum
- NAS-593 - Nut, Rigid Tube Connector, Aluminum
- NAS-594 - Coupling, Rigid Tube Connector, Cres
- NAS-595 - Ring, Rigid Tube Connector, Cres
- NAS-596 - Nut, Rigid Tube Connector, Cres
- NAS-597 - Fittings, Rigid Tube Connector, Flared Tube
- NAS-652 - Coupling, Rigid Tube Bulkhead Connector
- NAS-815 - Plug, Protective, Flared Hose or Tube Assembly
- NFPA-T3.20.14 - Pneumatic Quick-action Couplings - Plug Dimensions
- QPL-15330 - Expansion Joint, Pipe, Synthetic Rubber, Fire-Retardant
- QPL-17882 - Repair Kits, Metallic Pipe and General Purpose, Damage Control
- QPL-18280 - Fittings, Flareless, Tube, Fluid Connection (Superseded by QPL-as18280)
- QPL-18287 - Fitting, Hose End, Detachable (for Self Sealing Fuel Hose)
- QPL-19179 - Coupling Assembly, Quick Diconnect, Fuel
- QPL-19607 - Fitting, Hose, Reusable, Medium and High Pressure
- QPL-21467 - Fittings, Flareless, Fluid Connection (Shipboard Use) (See Notice for Replacement Information)
- QPL-24136 - Hose, Synthetic Rubber, Synthetic Fiber Reinforced for Flexible Hose Assemblies, General Specification
- QPL-24202 - Fitting, Butt Welding, Seamless or Welded, 70-30 Copper-Nickel Alloy, 700 Psi, 200 Deg. F. (No Superseding Document)
- QPL-24356 - Couplings, Segmented, & Split Clamps Reattachable, 2-1/2-, 4-, 6- & 7-Inch, for Refueling at Sea Hose (No Superseding Document)
- QPL-24787 - Fittings, End, Reusable for Flexible Hose Assemblies, General Specification for
- QPL-24787-4 - Fittings, End, Reusable for Flexivle Hose Assemblies Generalspecification For
- QPL-24788 - Coupling Assembly, Semi-Dry-Break, Quick-Disconnect Fuel with or without Continuity Switch
- QPL-25427 - Coupling Assembly, Hydraulic, Self-Sealing, Quick-Disconnect (Superseded by QPL-as25427)
- QPL-25531 - Coupling Half, Quick Disconnect, Pneumatic starter, External, Low Pressure
- QPL-25676 - Adapter, Pressure Lubricating Oil Servicing, Aircraft (No Superseding Document)
- QPL-25677 - Adapter, Cap, and Nozzle, Pressure Lubricating Oil Servicing, Aircraft, General Specification For
- QPL-27272 - Fittings, Polytetrafluoroethylene Hose, High Temperature, Medium Pressure, General Specification For
- QPL-27417 - Fitting, Rocket Engine, Fluid Connection (No Superseding Document)
- QPL-2948 - Joint, Steel, Flexible, for Temporary Pipe Connections(
- QPL-38726 - Adapter Assembly, Reusable, Flexible Hose, Low Pressure
- QPL-4109 - Coupling Assembly, Air Hose, Quick - Operating
- QPL-5070 - Adapter, Hose To Tube, Pipe & Flange, Reusable - Hydraulic, Fuel & Oil Oines, General
- QPL-52525 - Fittings, Hose, Hydraulic, Reusable, Field-Attachable and Clamp-Halves, to Mate with SAE-J517 Type Hoses, General Specification for
- QPL-6985 - Clamp, Hose (No Superseding Document)
- QPL-7942 - Connector, Hose, Quick Acting, Anti (g) Suit
- QPL-83296 - Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for
- QPL-83798 - Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification For
- QPL-83798/1 - Fittings, Rubber Hose, Lightweight, Medium Pressure, General Specification for (Superseded by QPL-83798)
- QPL-83798/2 - Fittings, Rubber Hose, Lightweight, Medium Pressure General Specification for (Superseded by QPL-83798)
- QPL-83798/3 - Fitting, Rubber Hose, Lightweight, Medium Pressure General Specification
- QPL-83798/4 - Fitting, Rubber Hose, Lightweight, Medium Pressure General Specification For
- QPL-83798/5 - Fittings, Rubber Hose, Lightweight, Medium Pressure, General Specification For
- QPL-83798/6 - Fittings, Rubber Hose, Lightweight, Medium Pressure, General Specification For
- QPL-83798/7 - Fittings, Rubber Hose, Lightweight, Medium Pressure, General Specification for (Superseded by QPL-83798)
- QPL-83798/8 - Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification for (Superseded by QPL-83798)
- QPL-83798/9 - Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification for (No Superseding Document)
- QPL-8783 - Clamp, Hose, Flat Band 500 Deg. F
- QPL-8789 - Fitting End, Attachable, Hydraulic, High Pressure (3,000 PSI), General Specification for
- QPL-960 - Traps, Steam, Intermittent Discharge and Continuous Flow, Naval Shipboard
- QPL-AS-18280 - Fittings, Flareless, Tube, Fluid Connection (Superseded by PRI-QPL-as18280)
- QPL-AS-25427 - Coupling Assembly, Hydraulic, Self-Sealing, Quick-Disconnect
- SAE-J1231 - Formed Tube Ends for Hose Connections and Hose Fittings
- SAE-J1453/1 - Specification for O-Ring Face Seal Connectors: Part 1 - Tube Connection Details and Common Requirements for Performance and Tests
- SAE-J1453/2 - Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads
- SAE-J1453/3 - Specification for O-Ring Face Seal Connectors: Part 3 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with SAE J1926-2 Inch Stud Ends
- SAE-J1926 - Specification for Straight Thread O-Ring Bossport
- SAE-J2044 - Quick Connect Coupling Specification for Liquid Fuel and Vapor/Emissions Systems
- SAE-J2244/1 - Connections for Fluid Power and General Use--Ports and Stud Ends With ISO 261 Threads and O-Ring Sealing Part 1: Port with O-Ring Seal in Truncated Housing
- SAE-J2244/2 - Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends--Dimensions, Design, Test Methods, and Requirements
- SAE-J2494-4 - Cartridge Cavity
- SAE-J2593 - Information Report for the Installation of Fluid Conductors and Connectors
- SAE-J512 - Automotive Tube Fittings
- SAE-J515 - Specification for O-Ring Materials Used with Hydraulic Connectors
- SAE-J518 - Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type (Cancelled Mar 2013, Superseded by J518/1 AND J518/2)
- SAE-J531 - Automotive Pipe, Filler, and Drain Plugs
- SAE-J534 - Lubrication Fittings
- SAE-J536 - Clamps, Hose
- SS-EN-12765 - Classification of thermosetting wood adhesives for non-structural applications
- SS-EN-12766-2 - Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content
- SS-EN-12767 - Passive safety of support structures for road equipment - Requirements and test methods
- UL-567 - Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Petroleum Products and LP-Gas
- WW-C-1692 - Coupling Assembly & Mender, Hose (Plastic & Rubber)
- WW-C-440 - Clamps, Hose (Low-Pressure)
- WW-C-623 - Couplings, Hose, Garden and Water (Cancelled, 1964, Use WW-C-624)
- WW-C-624 - Coupling Assembly, Hose (Garden, Water, & Water Suction)
- WW-C-626 - Coupling, Hose, Oil Suction and Discharge (Cancelled, 1973,No Replacement)
- WW-C-631 - Couplings, Hose, Pneumatic and Spray (for Working Pressures Up To 150 Pounds per Square Inch) - Cancelled, 1968, No Replacement
- WW-C-633 - Coupling Halves, Cap & Wye; Quick Disconnect Pneumatic Hose,Two-Lug Universal Type
- WW-C-636 - Coupling, Hose, Steam (Cancelled, 1971, Use MIL-C-52705)
- WW-C-646 - Coupling, Hose, Water Suction (Cancelled, 1964, Use WW-C-624)
- WW-F-406 - Flanges, Cast-Iron (Classes 125 & 250) & Bronze (Classes 150& 300)
- WW-N-351 - Nipple, Pipe, Threaded
- WW-N-701 - Nozzles, Hose, Garden (for 5/8 Inch & 3/4 Inch Hose)
- WW-P-325 - Pipe, Bends, Traps, Caps and Plugs, Lead (for Industrial Pressure, and Soil and Waste Applications)
- WW-P-460 - Pipe Fittings; Brass or Bronze (Threaded), Classes 125 and 250 Pound
- WW-P-471 - Pipe-Fitting, Bushings, Locknuts, & Plugs, Iron, Steel, & Aluminum, (Threaded), 125-15
- WW-P-491 - Pipe Fitting, Cast Iron, (Threaded) Drainage (Cancelled, 1983, Use ANSI-B16.12, MS-90522, MS-90523, MS-90524, MS-90525, MS-90526, MS-90527, and MS-90528)
- WW-P-501 - Pipe Fittings, Cast Iron, Screwed 125 & 250 Pound
- WW-P-521 - Pipe Fittings, Flange Fittings, Flanges, and Flanges: Steel and Malleable Iron (Threaded and butt-Welding) Class 150
- WW-S-2739 - Strainers, Sediment: Pipeline, Water, Air, Gas, Oil or Steam
- WW-S-615 - Head, Sprinkler, (Underground Connected) (Cancelled, 1966, Use WW-H-1220)
- WW-T-696 - Traps, Steam
- WW-T-725 - Tube Fittings, Copper & Copper Alloy, Wrought or Cast, Solder Ends
- WW-U-516 - Unions, Brass or Bronze, Threaded Pipe Connections & Solder-Joint Tube Connections
- WW-U-531 - Unions, Pipe, Steel or Malleable Iron: Threaded Connection,150Lb, 250Lb, 300Lb Wsp
- X-25538 - Couplings, Tube, Flexible, Fluid Line +See MIL-C-25014+