FSC 9540: Structural Shapes, Nonferrous Base Metal
The following documents are a part of this series:- AMS-10135 - Angle - Bulb Section Extruded
- AMS-10136 - Tee - Extruded
- AMS-10137 - Channel - Extruded
- AMS-10138 - Zee - Equal Leg Extruded
- AMS-10139 - Zee - Unequal Leg Extruded
- AMS-10140 - I - Section - Extruded
- AMS-10141 - Tee - Bulb Section Extruded
- AMS-4162 - Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated, Stress Relief Stretched, Straightened, and Precipitation Heat Treated
- AMS-4163 - Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
- AMS-4388 - Magnesium Alloy Extrusions, 3.0Th - 1.5Mn (Hm31A-F) as Extruded
- AMS-4935 - Titanium Alloy Extrusions and Flash Welded Rings 6Al - 4V Annealed Beta Processed
- AMS-T-21014 - Tungsten Base Metal, High Density (Cancelled Mar 2008)
- AND-10136 - Tee, Extruded
- AND-10137 - Channel Extruded
- AND-10139 - Zee - Unequal Leg Extruded
- AND-10141 - Tee - Bulb Section Extruded
- CSA-Z243.181A - Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 2: Virtual Filestore Definition - AMENDMENT 1: Filestore Management (Adopted Amendment 1:1992 to ISO 8571-2:1988)
- DIN-EN-1706 - Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties; German version EN 1706:2010
- JAN-B-67 - Brass, Cartridge, Disks (Use Military Specification MIL-C-50)
- MIL-A-19065 - Aluminum Alloy Bars, Rods, and Structural Shaped Sections, Extruded 5356 (C56S)
- MIL-A-25994 - Aluminum Alloy Angles, Channels, I and Z Beams, Extruded or Rolled, Structural Shapes (Use QQ-A-200)
- MIL-A-52242 - Aluminum Alloy Extruded Rod, Bar, and Shapes, 7001 (No Superseding Document)
- MIL-B-12128 - Brass, Sintered; Structural Parts (No Superseding Document)
- MIL-B-17511 - Brass, Naval: Casting (Superseded by QQ-B-621)
- MIL-B-21531 - Beryllium Shapes, Vacuum Hot Pressed (No Superseding Document)
- MIL-B-994 - Brass, Naval, Rods, Wire, Shapes, Forgings, and Flat Products (Flat Wire, Strip, Sheet, Bar, and Plate) (Use QQ-B-637 and QQ-B-639 as Applicable)
- MIL-C-11862 - Chest, Magnesium-Alloy, for Electric Lighting Equipment (Sets Eng. 6 Nos. 460-02, 460-03, and 460-04).
- MIL-F-23999 - Forging, Closed Die, Nickel Copper Aluminum Alloy (K-Monel) (Use QQ-N-286)
- MIL-HDBK-301 - Aircraft Extruded Shapes and Dies (No Superseding Document)
- MIL-N-17163 - Nickel-Copper Alloy, Wrought, (55-60 Percent Nickel) Low Permeability (No Superseding Document)
- MIL-STD-276 - Impregnation of Porous Metal Castings and Powdered Metal Components
- MIL-T-21014 - Tungsten Base Metal, High Density (Superseded by SAE AMS--T-21014)
- MIL-T-21014/1 - Tungsten Base Parts, High Density Metal (Sintered or Hot Pressed), Coated, Electrodeposited Cadmium (No Superseding Document)
- MIL-T-21014/2 - Tungsten Base Parts, High Density Metal (Sintered or Hot Pressed), Coated, Vacuum Deposited Cadmium (No Superseding Document)
- MIL-T-21014/3 - Tungsten Base Parts, High Density Metal (Sintered or Hot Pressed), Coated, Electrodeposited Chromium (No Superseding Document)
- MIL-T-81556 - Titanium and Titanium Alloys, Extruded Bars and Shapes, Aircraft Quality
- MIL-Z-19859 - Zirconium Alloy Wrought Products
- MS-14284 - Angle, Shape Style I Aluminum Alloy 2024 (No Superseding Document)
- MS-14285 - Angle, Shape Style Ii Aluminum Alloy 2024 (No Superseding Document)
- MS-14286 - Angle, Shape Style Iii Aluminum Alloy 2024 (No Superseding Document)
- MS-14287 - Angle, Shape Style I Aluminum Alloy 7075 (No Superseding Document)
- MS-14288 - Angle, Shape Style Ii Aluminum Alloy 7075 (No Superseding Document)
- MS-14359 - Sheet, Aluminum Alloy Alclad 7075 (No Superseding Document)
- MS-14363 - Channel, Style I Aluminum Alloy 2024 (No Superseding Document)
- MS-14364 - Channel, Style Ii Aluminum Alloy 2024 (No Superseding Document)
- MS-14365 - Channel, Style Iii Aluminum Alloy 2024 (No Superseding Document)
- MS-14366 - Channel, Shape Style Iv Aluminum Alloy 2024 (No Superseding Document)
- MS-14367 - Channel, Style I Aluminum Alloy 7075 (No Superseding Document)
- MS-14368 - Channel, Style Ii Aluminum Alloy 7075 (No Superseding Document)
- MS-14369 - Channel, Style Iii Aluminum Alloy 7075 (No Superseding Document)
- MS-14370 - Tee, Style I, Exfoliated Aluminum Alloy 7075 (No Superseding Document)
- MS-14371 - Tee, Style Ii Aluminum Alloy 7075 (No Superseding Document)
- MS-14372 - Tee, Style Iii, Aluminum Alloy 7075 (No Superseding Document)
- MS-14373 - Tee, Style Iv Aluminum Alloy 7075 (No Superseding Document)
- MS-14374 - Tee, Style V Aluminum Alloy 7075 (No Superseding Document)
- MS-14375 - Tee, Style I Aluminum Alloy 2024 (No Superseding Document)
- MS-14376 - Tee, Style Ii Aluminum Alloy 2024 (No Superseding Document)
- MS-14377 - Tee, Style Iii Aluminum Alloy 2024 (No Superseding Document)
- MS-14378 - Tee, Style I Aluminum Alloy 7178 (No Superseding Document)
- MS-14379 - H-Beam, Wide Flange, Aluminum Alloy 6061 (No Superseding Document)
- MS-14380 - H, Beam Aluminum Alloy 2024 (No Superseding Document)
- MS-14381 - H, Beam, Style I Aluminum Alloy 7075 (No Superseding Document)
- MS-14382 - H, Beam, Style Ii Aluminum Alloy 7075 (No Superseding Document)
- MS-14383 - I, Beam, Style I Aluminum Alloy 2024 (No Superseding Document)
- MS-14384 - I, Beam, Style Ii Aluminum Alloy 2024 (No Superseding Document)
- MS-14385 - I Beam Aluminum Alloy 7075 (No Superseding Document)
- MS-14386 - I Beam Aluminum Alloy 7178 (No Superseding Document)
- MS-14387 - Zee, Style I Aluminum Alloy 2024 (No Superseding Document)
- MS-14388 - Zee, Style Ii Aluminum Alloy 2024 (No Superseding Document)
- MS-14389 - Zee, Style Iii Aluminum Alloy 2024 (No Superseding Document)
- MS-14390 - Zee, Style I Aluminum Alloy 7075 (No Superseding Document)
- MS-14391 - Zee, Style Ii Aluminum Alloy 7075 (No Superseding Document)
- MS-14392 - Zee, Style Iii Aluminum Alloy 7075 (No Superseding Document)
- MS-14393 - Zee Aluminum Alloy 7178 (No Superseding Document)
- MS-52036 - Structural Angle, Copper Base Alloy 360 (No Superseding Document)
- MS-52037 - Structural Channel, Copper Base Alloy 360 (No Superseding Document)
- QPL-7438 - Core Material, Aluminum, for Sandwich Construction
- QQ-A-630 - Aluminum Bronze Bars, Rods, Shapes, Drawn Strip
- QQ-C-502 - Copper Rods & Shapes; & Flat Products With Finished Edges (Flat Wire, Strips & Bars)
- QQ-C-586 - Copper-Nickel-Zinc Alloy, Rod, Shapes, Flat Products With Finished Edges (Flat Wire, S
- QQ-C-591 - Copper Silicon, Copper Zinc Silicon, & Copper-Nickel-Siliconalloys: Pro, Wire, Shapes,
- QQ-M-31 - Magnesium Alloy, Bars, Rods, & Special Shaped Sections, Extruded
- QQ-N-35 - Naval Brass, Rods, Bars, Wire, Shapes and Forgings +Cancelled, 1961, Superseded By QQ-B-637