Document Center List of Standards on Mechanical Systems And Components For General Use (Vocabularies)
ICS Code 01.040.21
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-F118 - Standard Definitions of Terms Relating to Gaskets (Withdrawn 2022)
- ASTM-F1789 - Standard Terminology for F16 Mechanical Fasteners
- ASTM-F2488 - Standard Terminology for Rolling Element Bearings
- ASTM-F592 - Standard Terminology of Collated and Cohered Fasteners and Their Application Tools (Withdrawn 2017)
BSI:
- BS-2519-2 - Glossary for gears. Notation
- BS-6560 - Glossary of terms for rolling bearings
- BS-7848 - Gears. Wear and damage to gear teeth
- BS-EN-ISO-14588 - Blind rivets. Terminology and definitions
- BS-EN-ISO-1891-2 - Fasteners. Terminology
- BS-EN-ISO-1891-4 - Fasteners. Vocabulary
- BS-EN-ISO-26909 - Springs. Vocabulary
- BS-ISO-10825-1 - Gears. Wear and damage to gear teeth
- BS-ISO-1122-1 - Vocabulary of gear terms
- BS-ISO-1122-2 - Vocabulary of gear terms
- BS-ISO-1132-1 - Rolling bearings. Tolerances
- BS-ISO-13203 - Chains, sprockets and accessories. List of equivalent terms
- BS-ISO-1891 - Fasteners. Terminology
- BS-ISO-1925 - Mechanical vibration. Balancing. Vocabulary
- BS-ISO-21940-2 - Mechanical vibration. Rotor balancing
- BS-ISO-21940-2-TC - Tracked Changes. Mechanical vibration. Rotor balancing
- BS-ISO-4378-1 - Plain bearings. Terms, definitions, classification and symbols
- BS-ISO-4378-1-TC - Tracked Changes. Plain bearings. Terms, definitions, classification and symbols
- BS-ISO-4378-2 - Plain bearings. Terms, definitions, classification and symbols
- BS-ISO-4378-2-TC - Tracked Changes. Plain bearings. Terms, definitions, classification and symbols
- BS-ISO-4378-3 - Plain bearings. Terms, definitions, classification and symbols
- BS-ISO-4378-3-TC - Tracked Changes. Plain bearings. Terms, definitions, classification and symbols
- BS-ISO-4378-4 - Plain bearings. Terms, definitions, classification and symbols
- BS-ISO-4378-5 - Plain bearings. Terms, definitions, classification and symbols
- BS-ISO-5288 - Synchronous belt drives. Vocabulary
- BS-ISO-5288-TC - Tracked Changes. Synchronous belt drives. Vocabulary
- BS-ISO-5408 - Screw threads. Vocabulary
- BS-ISO-5593 - Rolling bearings. Vocabulary
- BS-ISO-5593-TC - Tracked Changes. Rolling bearings. Vocabulary
- BS-ISO-6811 - Spherical plain bearings. Vocabulary
- PD-ISO-10825-2 - Gears. Wear and damage to gear teeth
- PD-ISO-10825-2-TC - Tracked Changes. Gears. Wear and damage to gear teeth
- PD-ISO-23768 - Rolling bearings. Parts library. Reference dictionary for rolling bearings
ISO:
- ISO-1081 - Belt drives - V-belts and V-ribbed belts, and corresponding grooved pulleys - Vocabulary
- ISO-10825 - Gears - Wear and damage to gear teeth - Terminology
- ISO-10825-1 - Gears - Wear and damage to gear teeth - Part 1: Nomenclature and characteristics
- ISO-10825-2 - Gears - Wear and damage to gear teeth - Part 2: Supplementary information
- ISO-1122-1 - Vocabulary of gear terms - Part 1: Definitions related to geometry
- ISO-1122-2 - Vocabulary of gear terms - Part 2: Definitions related to worm gear geometry
- ISO-1132 - Rolling bearings -- Tolerances -- Definitions
- ISO-1132-1 - Rolling bearings -- Tolerances -- Part 1: Terms and definitions
- ISO-13203 - Chains, sprockets and accessories - List of equivalent terms
- ISO-14588 - Blind rivets -- Terminology and definitions
- ISO-17893 - Steel wire ropes - Vocabulary, designation and classification
- ISO-17893-A1 - Steel wire ropes - Vocabulary, designation and classification - Amendment 1
- ISO-1891 - Fasteners - Terminology
- ISO-1891-2 - Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings
- ISO-1891-2-AM1 - - Amendment 1
- ISO-1891-4 - Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality
- ISO-1925 - Mechanical vibration -- Balancing -- Vocabulary
- ISO-21940-2 - Mechanical vibration - Rotor balancing - Part 2: Vocabulary
- ISO-23768 - Rolling bearings - Parts library - Reference dictionary for rolling bearings
- ISO-23768-1 - Rolling bearings - Parts library - Part 1: Reference dictionary for rolling bearings
- ISO-24393 - Rolling bearings - Linear motion rolling bearings - Vocabulary
- ISO-2532 - Steel wire ropes - Vocabulary
- ISO-26909 - Springs - Vocabulary
- ISO-4378-1 - Plain bearings - Terms, definitions, classification and symbols - Part 1: Design, bearing materials and their properties
- ISO-4378-2 - Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear
- ISO-4378-3 - Plain bearings - Terms, definitions, classification and symbols - Part 3: Lubrication
- ISO-4378-4 - Plain bearings - Terms, definitions, classification and symbols - Part 4: Basic symbols
- ISO-4378-5 - Plain bearings - Terms, definitions, classification and symbols - Part 5: Application of symbols
- ISO-4378-6 - Plain bearings - Terms, definitions, classification and symbols - Part 6: Abbreviated terms
- ISO-5288 - Synchronous belt drives - Vocabulary
- ISO-5408 - Screw threads - Vocabulary
- ISO-5593 - Rolling bearings - Vocabulary
- ISO-5593-1 - Rolling bearings - Vocabulary - Amendment 1
- ISO-6811 - Spherical plain bearings - Vocabulary
- ISO-7146 - Plain bearings - Terms, characteristics and causes of damage and changes in appearance
Other SDOs:
- EN-ISO-1891-2 - Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings
- EN-ISO-1891-4 - Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)
- EN-ISO-26909 - Springs, Vocabulary
- JIS-B-0104 - Rolling bearings -- Vocabulary
- JIS-B-0147 - Blind rivets -- Terminology and definitions
- JIS-B-0161 - Spherical plain bearings -- Vocabulary
- JIS-B-1859 - Synchronous belt drives -- Vocabulary
- JIS-B-2402-2 - Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 2: Vocabulary
- SIS-ISO/TS-23768 - Rolling bearings Parts library - Reference dictionary for rolling bearings (ISO/TS 23768:2022, IDT)
- SS-EN-12526 - Castors and wheels - Vocabulary, recommended symbols and multilingual dictionary
- SS-EN-ISO-128-1 - Technical product documentation (TPD) - General principles of representation - Part 1: Introduction and fundamental requirements (ISO 128-1:2020)
- SS-EN-ISO-1891-2 - Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014)
- SS-EN-ISO-1891-2-AM1 - Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings - Amendment 1 (ISO 1891-2:2014/Amd 1:2020)
- SS-EN-ISO-1891-4 - Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)
- SS-EN-ISO-225 - Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010)
- SS-EN-ISO-26909 - Springs - Vocabulary (ISO 26909:2009)
- SS-ISO-1132-1 - Rolling bearings - Tolerances - Part 1: Terms and definitions (ISO 1132-1:2000, IDT)
- SS-ISO-1891 - Fasteners - Terminology (ISO 1891:2009, IDT)
- SS-ISO-1925 - Mechanical vibration - Balancing - Vocabulary
- SS-ISO-1925-AM1 - Mechanical vibration - Balancing - Vocabulary - Amendment 1
- SS-ISO-2162-3 - Technical product documentation - Springs - Part 3: Vocabulary
- SS-ISO-21940-1 - Mechanical vibration - Rotor balancing - Part 1: Introduction (ISO 21940-1:2019, IDT)
- SS-ISO-21940-2 - Mechanical vibration - Rotor balancing - Part 2: Vocabulary (ISO 21940-2:2017, IDT)
- SS-ISO-3408-1 - Ball screws - Part 1: Vocabulary and designation (ISO 3408-1:2006, IDT)
- SS-ISO-5408 - Screw threads - Vocabulary (ISO 5408:2009, IDT)
- SS-ISO-5593 - Rolling bearings - Vocabulary (ISO 5593, IDT)
- SS-ISO-6811 - Spherical plain bearings - Vocabulary (ISO 6811:1998, IDT)