Document Center List of Standards on Hospital Equipment Including Hospital Beds, Surgical Tables, Medical Garments, Medical Gloves, Containers For Sharp Disposal, Etc.
ICS Code 11.140
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D3577 - Standard Specification for Rubber Surgical Gloves
- ASTM-D3578 - Standard Specification for Rubber Examination Gloves
- ASTM-D3738 - Standard Specification for Rubber-Coated Cloth Hospital Sheeting
- ASTM-D3772 - Standard Specification for Industrial Rubber Finger Cots
- ASTM-D5151 - Standard Test Method for Detection of Holes in Medical Gloves
- ASTM-D5250 - Standard Specification for Poly(vinyl chloride) Gloves for Medical Application
- ASTM-D6124 - Standard Test Method for Residual Powder on Medical Gloves
- ASTM-D6319 - Standard Specification for Nitrile Examination Gloves for Medical Application
- ASTM-D6355 - Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves
- ASTM-D6977 - Standard Specification for Polychloroprene Examination Gloves for Medical Application
- ASTM-D6978 - Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs
- ASTM-D7102 - Standard Guide for Determination of Endotoxin on Sterile Medical Gloves
- ASTM-D7103 - Standard Guide for Assessment of Medical Gloves
- ASTM-D7160 - Standard Practice for Determination of Expiration Dating for Medical Gloves
- ASTM-D7161 - Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions
- ASTM-D7198 - Standard Specification for Disposable Embalming Gloves for Single-Use Applications
- ASTM-D7907 - Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves
- ASTM-E2280 - Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
- ASTM-E2361 - Standard Guide for Testing Leave-On Products Using In-Situ Methods
- ASTM-F1616 - Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings
- ASTM-F1670 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
- ASTM-F1671 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
- ASTM-F1690 - Standard Specification for Humidifiers for Medical Use—Part 1: General Requirements for Active Humidification Systems (Withdrawn 2013)
- ASTM-F1819 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
- ASTM-F2076 - Standard Practice for Communicating an EMS Patient Report to Receiving Medical Facilities
- ASTM-F2100 - Standard Specification for Performance of Materials Used in Medical Face Masks
- ASTM-F2101 - Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of
Staphylococcus aureus - ASTM-F2132 - Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps (Withdrawn 2017)
- ASTM-F2407 - Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities
- ASTM-F960 - Standard Specification for Medical and Surgical Suction and Drainage Systems (Withdrawn 2003)
- ASTM-PS77 - Method for Standard Clinical Method for Human Repeat Insult Patch Testing of Medical Gloves (Withdrawn 1998)
BSI:
- BS-1694 - Specification for hospital ward cots for children
- BS-1765-1 - Hospital bedside lockers.
- BS-1765-2 - Specification for hospital bedside lockers
- BS-1823 - Specification for stainless steel hollow-ware for use in hospital operating-theatres and wards
- BS-1895 - Specification for metal-framed wheeled screens for use in hospitals
- BS-1979 - Specification for hospital ward bedsteads for psychiatric hospitals
- BS-2099 - Specification for castors for hospital equipment
- BS-2588-1 - Portable sanitary pans for use in healthcare establishments.
- BS-2588-2 - Portable sanitary pans for use in healthcare establishments
- BS-2606 - Specification for X-ray protective gloves for medical diagnostic purposes up to 150 kV peak
- BS-2718 - Specification for gas cylinder trolleys
- BS-2838-1 - Examination and general treatment couches.
- BS-2838-2 - Examination and general treatment couches
- BS-2881 - Specification for cupboards for the storage of medicines in health care premises
- BS-2891 - Specification for operating table mattresses and mattress sections
- BS-3215 - Specification for reusable portable urinals
- BS-3475 - Specification for bowl stands for use in hospitals
- BS-3619 - Specification. Mobile infusion stands
- BS-3878 - Specification for flexible PVC sheeting for hospital use
- BS-4068 - Specification for hospital trolleys for instruments, dressings and for anaesthetists' use including angular trolleys
- BS-4322 - Recommendations for buffering on hospital vehicles such as trolleys
- BS-4376 - Specification for electrically operated blood storage refrigerators
- BS-4376-1 - Electrically operated blood storage refrigerators
- BS-4376-2 - Electrically operated blood storage refrigerators
- BS-4533-102.55 - Specification for Luminaires for Hospitals and Health Care Buildings
- BS-4886 - Specification for hospital bedsteads
- BS-4886-1 - Specification for hospital bedsteads. Bedsteads of variable height
- BS-4886-2 - Specification for hospital bedsteads. Bedsteads of fixed height
- BS-5223-2 - Specification for hospital bedding
- BS-5223-3 - Specification for hospital bedding
- BS-5223-4 - Specification for hospital bedding
- BS-5724-2.28 - Medical electrical equipment. Particular requirements for safety. Specification for electrically powered suction equipment
- BS-5726 - Microbiological safety cabinets. Information to be supplied by the purchaser to the vendor and to the installer, and siting and use of cabinets. Recommendations and guidance
- BS-5827 - Specification for mobile, manually operated patient-lifting devices
- BS-6153 - Specification for oropharyngeal airways
- BS-6859-1 - Operating tables
- BS-6859-2 - Operating tables
- BS-7320 - Specification for sharps containers
- BS-7460 - Code of practice for use of spray extraction machines on carpets and soft floor coverings in hospitals
- BS-EN-12218 - Rail systems for supporting medical equipment
- BS-EN-13795 - Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels
- BS-EN-13795-1 - Surgical clothing and drapes. Requirements and test methods
- BS-EN-13795-2 - Surgical clothing and drapes. Requirements and test methods
- BS-EN-13795-3 - Surgical Drapes, Gowns & Clean Air Suits, Used as Medical Devices for Patients, Clinic
- BS-EN-14683 - Medical face masks. Requirements and test methods
- BS-EN-16442 - Controlled environment storage cabinet for processed thermolabile endoscopes
- BS-EN-455-1 - Medical gloves for single use
- BS-EN-455-2 - Medical gloves for single use
- BS-EN-455-3 - Medical gloves for single use
- BS-EN-455-3-TC - Tracked Changes. Medical gloves for single use
- BS-EN-455-4 - Medical gloves for single use
- BS-EN-50637 - Medical electrical equipment. Particular requirements for the basic safety and essential performance of medical beds for children
- BS-EN-60601-2-35 - Medical electrical equipment. Particular requirements for safety
- BS-EN-60601-2-38 - Part 2: Section 38: Particular Requirements for Safety. Particular Requirements for Th
- BS-EN-60601-2-46 - Medical electrical equipment
- BS-EN-60601-2-52 - Medical electrical equipment
- BS-EN-80601-2-35 - Medical electrical equipment
- BS-EN-IEC-60601-2-46 - Medical electrical equipment
- BS-EN-ISO-11810 - Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers. Primary ignition, penetration, flame spread and secondary ignition
- BS-EN-ISO-21171 - Medical gloves. Determination of removable surface powder
- BS-EN-ISO-22610 - Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment. Test method to determine the resistance to wet bacterial penetration
- BS-EN-ISO-22612 - Clothing for protection against infectious agents. Test method for resistance to dry microbial penetration
- BS-ISO-10282 - Single-use sterile rubber surgical gloves. Specification
- BS-ISO-22882 - Castors and wheels. Requirements for castors for hospital beds
- DD-ENV-14237 - Textiles in the healthcare system
- PAS-29 - Disposable pulp products for use in healthcare
- PD-6630 - Nomenclature system for medical devices for the purpose of regulatory data exchange. Rationale
- PD-CEN-14237-TC - Tracked Changes. Textiles for healthcare and social services facilities
- PD-CEN-16953 - Medical gloves for single use. Guidance for selection
IEC:
- IEC-60601-2-35 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use
- IEC-60601-2-46 - Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables
- IEC-60601-2-46 CMV - Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables
- IEC-60601-2-46-RL - Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables
- IEC-60601-2-52 - Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
- IEC-60601-2-52-AM1 - Amendment 1 - Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
- IEC-80601-2-35 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
ISO:
- ISO-10282 - Single-use sterile rubber surgical gloves - Specification
- ISO-11193 - Single-use rubber examination gloves - Specification
- ISO-11193-1 - Single-use medical examination gloves - Part 1: Specification for gloves made from rubber latex or rubber solution
- ISO-11193-1-1 - Single-use medical examination gloves - Part 1: Specification for gloves made from rubber latex or rubber solution - Amendment 1
- ISO-11193-2 - Single-use medical examination gloves - Part 2: Specification for gloves made from poly(vinyl chloride)
- ISO-21171 - Medical gloves - Determination of removable surface powder
- ISO-22609 - Clothing for protection against infectious agents - Medical face masks - Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)
- ISO-22882 - Castors and wheels - Requirements for castors for hospital beds
Other SDOs:
- AAMI/ISO-80601-2-35 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use
- DIN-EN-12218 - Rail Systems for Supporting Medical Equipment
- DIN-EN-13795-1 - Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Part 1: General requirements for manufacturers, processors and products; German version EN 13795-1:2002+A1:2009
- DIN-EN-13795-2 - Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - Part 2: Test methods; German version EN 13795-2:2004+A1:2009
- DIN-EN-13795-3 - Part 3: Performance Requirements & Performance Levels, Surgical Drapes, Gowns & Clean
- DIN-EN-14683 - Medical face masks - Requirements and test methods; German version EN 14683:2014
- DIN-EN-455-3 - Medical gloves for single use - Part 3: Requirements and testing for biological evaluation; German version EN 455-3:2015
- DIN-EN-80601-2-35 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
- DIN-EN-ISO-11810 - Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition
- DIN-EN-ISO-11810-1 - Part 1: Primary Ignition & Penetration, Lasers & Laser-Related Equipment - Test Method
- DIN-EN-ISO-21171 - Medical Gloves - Determination of Removable Surface Powder
- DIN-EN-ISO-22610 - Surgical Drapes, Gowns & Clean Air Suits, Used as Medical Devices, for Patients, Clini
- DIN-EN-ISO-22612 - Clothing for Protection Against Infectious Agents, Test Method for Resistance To Dry M
- EN-12218 - Rail Systems for Supporting Medical Equipment
- EN-13795 - Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels
- EN-13795-1 - Part 1: General Requirements for Manufacturers, Processors & Products, Surgical Drapes
- EN-13795-2 - Part 2: Test Methods, Surgical Drapes, Gowns & Clean Air Suits, Used as Medical Device
- EN-13795-3 - Part 3: Performance Requirements & Performance Levels, Surgical Drapes, Gowns & Clean
- EN-14683 - Medical face masks - Requirements and test methods
- EN-16442 - Controlled environment storage cabinet for processed thermolabile endoscopes
- EN-455-2 - Medical gloves for single use - Part 2: Requirements and testing for physical properties
- EN-455-3 - Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
- EN-455-4 - Part 4: Requirements & Testing for Shelf Life Determination, Medical Gloves for Single
- EN-50637 - Medical electrical equipment - Particular requirements for the basic safety and essential performance of medical beds for children
- EN-540 - Clinical Investigation of Medical Devices for Human Subjects
- EN-60601-2-46 - Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables
- EN-60601-2-52 - Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
- EN-80601-2-35 - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
- EN-ISO-11810 - Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition
- EN-ISO-11810-1 - Part 1: Primary Ignition & Penetration, Lasers & Laser-Related Equipment - Test Method
- EN-ISO-21171 - Medical Gloves - Determination of Removable Surface Powder
- EN-ISO-22612 - Clothing for Protection Against Infectious Agents, Test Method for Resistance To Dry M
- GB/T-24787 - Single-use non-sterile rubber surgical gloves (TEXT OF DOCUMENT IS IN ENGLISH)
- JIS-T-8062 - Clothing for protection against infectious agents -- Face masks -- Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)
- SIS-CEN/TR-16953 - Medical gloves for single use - Guidance for selection
- SIS-CEN/TS-14237 - Textiles for healthcare and social services facilities
- SIS-EN-60601-2-46 - Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables
- SIS-TR-9 - Textiles in the health care system (ENV 14237:2002)
- SS-8760013 - Determination of contact pressure on mattresses, beds and other underlay
- SS-8760050 - Health care textiles - Underpants for baby
- SS-8760052 - Health care textiles - Romper for baby
- SS-8760053 - Health care textiles - Wrap around shirt for baby
- SS-8760060 - Health care textiles - Shirt for child
- SS-8760061 - Health care textiles -T-shirt for child
- SS-8760064 - Health care textiles - Trousers for child
- SS-8760067 - Health care textiles - Night shirt for child
- SS-8760079 - Health care textiles - Underpants for child
- SS-8760089 - Health care textiles - Underpants for patient
- SS-8760092 - Health care textiles - Night shirt for patient
- SS-8760093 - Health care textiles - Bandage shirt for patient
- SS-8760100 - Health care textiles - T-shirt for staff/patient
- SS-8760101 - Health care textiles - Cardigan for patient
- SS-8760102 - Health care textiles - Trousers for patient
- SS-8760119 - Health care textiles - Trouser with leg cuff for staff
- SS-8760120 - Health care textiles - Trouser for staff
- SS-8760121 - Health care textiles - Blouse for staff
- SS-8760123 - Health care textiles - Dress for staff
- SS-EN-12218 - Rail systems for supporting medical equipment
- SS-EN-12218-AM1 - Rail systems for supporting medical equipment
- SS-EN-12532 - Castors and wheels - Castors and wheels applications up to 1,1 m/s (4 km/h)
- SS-EN-13795-1 - Surgical clothing and drapes - Requirements and test methods - Part 1: Surgical drapes and gowns
- SS-EN-13795-2 - Surgical clothing and drapes - Requirements and test methods - Part 2: Clean air suits
- SS-EN-13795-3 - Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - Part 3: Performance requirements and performance levels
- SS-EN-14683 - Medical face masks - Requirements and test methods
- SS-EN-16442 - Controlled environment storage cabinet for processed thermolabile endoscopes
- SS-EN-455-1 - Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
- SS-EN-455-1-AM1 - Medical gloves for singel use - Part 1: Requirements and testing for freedom from holes
- SS-EN-455-2 - Medical gloves for single use - Part 2: Requirements and testing for physical properties
- SS-EN-455-2-AM1 - Medical gloves for singel use - Part 2: Requirements and testing for physical properties
- SS-EN-455-3 - Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
- SS-EN-455-4 - Medical gloves for single use - Part 4: Requirements and testing for shelf life determination
- SS-EN-ISO-10079-1 - Medical suction equipment - Part 1: Electrically powered suction equipment - Amendment 1: Changes to requirements for operating at extremes of temperature (ISO 10079-1:2015/Amd 1:2018)
- SS-EN-ISO-10079-2 - Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:2022)
- SS-EN-ISO-10079-3 - Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2022)
- SS-EN-ISO-11810 - Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015)
- SS-EN-ISO-19054 - Rail systems for supporting medical equipment (ISO 19054:2005)
- SS-EN-ISO-19054-AM1 - Rail systems for supporting medical equipment (ISO 19054:2005/Amd 1:2016)
- SS-EN-ISO-21171 - Medical gloves - Determination of removable surface powder (ISO 21171:2006)
- SS-EN-ISO-22610 - Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration (ISO 22610:2006)
- SS-EN-ISO-22612 - Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration (ISO 22612:2005)
- SS-EN-ISO-81060-3 - Non-invasive sphygmomanometers - Part 3: Clinical investigation of continuous automated measurement type (ISO 81060-3:2022)
- SS-ISO-11193-1 - Single-use medical examination gloves - Part 1: Specification for gloves made from rubber latex or rubber solution (ISO 11193-1:2020, IDT)