Document Center List of Standards on Valves
ICS Code 23.060
Return to ICS Index.Up to Level 1:
Down to Level 3:
- 23.060.01 (Valves in general)
- 23.060.10 (Globe valves)
- 23.060.20 (Ball and plug valves)
- 23.060.30 (Gate valves)
- 23.060.40 (Pressure regulators Including pressure-reducers Protection against excessive pressure, see 13.240)
- 23.060.50 (Check valves)
- 23.060.99 (Other valves)
The following documents are a part of this series:
BSI:
- BS-EN-IEC-60534-4 - Industrial-process control valves
- BS-EN-IEC-60534-4-TC - Tracked Changes. Industrial-process control valves
IEC:
- IEC-60534-3-1 - Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
- IEC-60534-4-RL - Industrial-process control valves - Part 4: Inspection and routine testing
- IEC-60534-6-2 - Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators
- IEC-60534-9 - Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs
- IEC-61514 - Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
- IEC-61514-2 - Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
- IEC-61518 - Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa)
Other SDOs:
- EN-61514-2 - Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
- JIS-B-2005-3-1 - Industrial-process control valves -- Part 3-1: Dimensions -- Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
- JIS-B-2005-6-2 - Industrial-process control valves -- Part 6-2: Mounting details for attachment of positioners to control valves -- Positioner mounting on rotary actuators
- SMS-3311 - Fittings for piping - Butterfly valves - Flanged valves. Body of steel for castings. Recilient seat. PN 25
- SMS-3312 - Fittings for piping - Butterfly valves with ends for welding - Body of steel for castings. Recilient seat. PN 16
- SMS-3314 - Fittings for piping - Butterfly valves - Wafer-type valves. Body of steel for castings. Recilient seat. PN 16
- SMS-3315 - Fittings for piping - Butterfly valves - Wafer-type valves. Body of steel for castings. Recilient seat. PN 25
- SS-1247 - Fittings for piping - Shut-off valves for PN 16 and PN 10 - Straight globe valves of cast iron with flanged ends, rising stem and sealing surfaces of Cu-alloy resistant to sea water
- SS-1248 - Fittings for piping - Shut-off valves for PN 16 and PN 10 - Angle globe valves of cast iron with flanged ends, rising stem and sealing surfaces of Cu-alloy resistant to sea water
- SS-1264 - Fittings for piping - Shut-off valves for PN 16 and PN 10 - Straight globe valves of cast iron withflanged ends, rising stem and sealing surfaces ofstainless steel
- SS-1265 - Fittings for piping - Shut-off valves for PN 16 and PN 10 - Angle globe valves of cast iron with flanged ends, rising stem and sealing surfaces of stainless steel
- SS-1266 - Fittings for piping - Stop-check valves for PN 16and PN 10 - Straight globe valves of cast iron with flanged ends, spring-loaded disk, rising stem and sealing surfaces of Cu-alloy resistant to sea water
- SS-1267 - Fittings for piping - Stop-check valves for PN 16and PN 10 - Angle globe valves of cast iron with flanged ends, spring-loaded disk, rising stem and sealing surfaces of Cu-alloy resistant to sea water
- SS-1270 - Fittings for piping - Stop-check valves for PN 16and PN 10 - Straight globe valves of cast iron with flanged ends, spring-loaded disk, rising stem and sealing surfaces of stainless steel
- SS-1271 - Fittings for piping - Stop-check valves for PN 16and PN 10 - Angle globe valves of cast iron with flanged ends, spring-loaded disk, rising stem and sealing surfaces of stainless steel
- SS-1272 - Fittings for piping - Check valves for PN 16 - Straight globe valves of cast iron with flanged ends, spring-loaded disk and sealing surfaces of Cu-alloy resistant to sea water
- SS-1273 - Fittings for piping - Check valves for PN 16 - Angle globe valves of cast iron with flanged ends, spring-loaded disk and sealing surfaces of Cu-alloyresistant to sea water
- SS-1274 - Fittings for piping - Check valves for PN 16 - Straight globe valves of cast iron with flanged ends, spring-loaded disk and sealing surfaces of stainless steel
- SS-1275 - Fittings for piping - Check valves for PN 16 - Angle globe valves of cast iron with flanged ends, spring-loaded disk and sealing surfaces of stainless steel
- SS-3051 - Fittings for piping - Shut-off valves for PN 16 and PN 10 - Straight globe valves of spheroidal graphite iron with flanged ends, rising stem sealing surfaces of Cu-alloy resistant to sea water
- SS-3053 - Fittings for piping - Shut-off valves for PN 25 -Straight globe valves of spheroidal graphite ironwith flanged ends, rising stem and sealing surfaces of Cu-alloy resistant to sea water
- SS-3054 - Fittings for piping - Shut-off valves for PN 25 -Angle globe valves of spheroidal graphite iron with flanged ends, rising stem and sealing surfaces of Cu-alloy resistant to sea water
- SS-3055 - Fittings for piping - Stop-check valves for PN 16- Straight globe valves of spheroidal graphite iron with flanged ends, spring-loaded disk, rising stem and sealing surfaces of Cu-alloy resistant to sea water
- SS-3056 - Fittings for piping - Stop-check valves for PN 16- Angle globe valves of spheroidal graphite iron with flanged ends, spring-loaded disk, rising stemand sealing surfaces of Cu-alloy resistant to water
- SS-3057 - Fittings for piping - Stop-check valves for PN 25- Straight globe valves of spheroidal graphite iron with flanged ends, spring-loaded disk, rising stem and sealing surfaces of Cu-alloy resistant to sea water
- SS-3058 - Fittings for piping - Stop-check valves for PN 25- Angle globe valves of spheroidal graphite iron with flanged ends, spring loaded disk, rising stemand sealing surfaces of Cu-alloy resistant to seawater
- SS-3059 - Fittings for piping - Check valves for PN 16 - Straight globe valves of spheroidal graphite iron with flanged ends, spring-loaded disk and sealing surfaces of Cu-alloy resistant to sea water
- SS-3060 - Fittings for piping - Check valves for PN 16 - Angle globe valves of spheroidal graphite iron with flanged ends, spring-loaded disk and sealing surfaces of Cu-alloy resistant to sea water
- SS-3061 - Fittings for piping - Check valves for PN 25 - Straight globe valves of spheroidal graphite iron with flanged ends, spring-loaded disk and sealing surfaces of Cu-alloy resistant to sea water
- SS-3062 - Fittings for piping - Check valves for PN 25 - Angle globe valves of spheroidal graphite iron with flanged ends, spring-loaded disk and sealing surfaces of Cu-alloy resistant to sea water
- SS-3291 - Fittings for piping - Shut-off valves for PN 40 -Straight globe valves of steel with flanged ends,rising stem and sealing surfaces of stainless steel
- SS-3292 - Fittings for piping - Shut-off valves for PN 40 -Angle globe valves of steel with flanged ends, rising stem and sealing surfaces of stainless steel
- SS-3293 - Rörledningsarmatur - Stängventiler PN 40 - Raka kägelventiler av stål med flänsanslutning, stigande spindel och tätning av rostfritt stål
- SS-3294 - Fittings for piping - Stop-check valves for PN 40- Angle globe valves with flanged ends, spring-loaded disk, rising stem and sealing surfaces of stainless steel
- SS-3295 - Fittings for piping - Check valves for PN 40 - Straight globe valves of steel with flanged ends, spring-loaded disk and sealing surfaces of stainlesssteel
- SS-3296 - Fittings for piping - Regulating valves for PN 40- Straight globe valves of steel with flanged ends, rising stem and sealing surfaces of stainless steel
- SS-3334 - Fittings for piping - Shut-off underground valvesfor PN 16 - Straight gate valves of Cu-alloy withfemale ends, rising stem and resilient disk washer
- SS-3335 - Fittings for piping - Shut-off underground valvesfor PN 16 - Straight globe valves of Cu-alloy with female ends, rising stem and resilient disk washer
- SS-3336 - Fittings for piping - Shut-off underground valvesfor PN 16 - Straight globe valves of Cu-alloy with male ends, rising stem and resilient disk washer
- SS-3349 - Fittings for piping - Shut-off valves for PN 10 -Water butterfly valves of stainless steel with recilient seat
- SS-3384 - Fittings for piping - Shut-off valves for PN 10 -Wafer butterfly valves of cast iron, lined insidewith EPDM and with resilient seat
- SS-3385 - Fittings for piping - Shut-off valves for PN 10 -Wafer butterfly valves, body of cast iron and disk of stainless steel, lined inside with EPDM and with resilient seat
- SS-3457 - Fittings for piping - Shut-off valves for PN 25 -Ball valves of-alloy resistant to dezincificationwith female ends, seat of fluorine and full bore
- SS-EN-12100 - Plastics piping systems - Polyethylene (PE) valves - Tests method for resistance to bending betweensupports
- SS-EN-12351 - Industrial valves - Protective caps for valves with flanged connections
- SS-EN-161-AM1 - Automatic shut-off valves for gas burners and gas-burning appliances
- SS-EN-161-AM2 - Automatic shut-off valves for gas burners and gasappliances
- SS-EN-19 - Industrial valves - Marking of metallic valves
- SS-EN-488 - District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made steel valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene
- SS-EN-558-1 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves
- SS-EN-558-2 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves
- SS-HD-1215-2 - Thermostatic radiator valves - Part 2: Dimensionsand details on connection
- SS-ISO-3286 - Single point cutting tools - Corner radii (ISO 3286:2016, IDT)
- SS-ISO-3320 - Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series (ISO 3320:2013, IDT)
- SS-ISO-5208 - Industrial valves - Pressure testing for valves