Document Center is acquired by Nimonik

Document Center List of Standards on Fibre Optic Systems In General

ICS Code 33.180.01

Return to ICS Index.

Up to Level 2:

• 33.180 (Fibre optic communications)

The following documents are a part of this series:

ASTM:

• ASTM-D4967 - Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing, and Strength Components in Fiber-Optic Cables
• ASTM-E1653 - Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides
• ASTM-F1699 - Standard Classification for Passive Fiber Optic Seals
• ASTM-F2303 - Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits
• ASTM-F2349 - Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems (Withdrawn 2017)
• ASTM-F3092 - Standard Terminology Relating to Optical Fiber Sensing Systems

BSI:

• BS-5266-4 - Emergency lighting
• BS-5266-5 - Emergency lighting
• BS-EN-60728-13 - Cable networks for television signals, sound signals and interactive services
• BS-EN-60728-13-1 - Cable networks for television signals, sound signals and interactive services
• BS-EN-60728-14 - Cable networks for television signals, sound signals and interactive services
• BS-EN-60794-2-20 - Optical fibre cables
• BS-EN-60794-3-70 - Optical fibre cables
• BS-EN-60794-5-10 - Optical fibre cables
• BS-EN-60794-5-20 - Optical fibre cables
• BS-EN-60825-2 - Safety of laser products
• BS-EN-61280-1-3 - Fibre optic communication subsystem test procedures
• BS-EN-61280-1-4 - Fibre optic communication subsystem test procedures
• BS-EN-61280-2-1 - Fibre optic communication subsystem test procedures
• BS-EN-61280-2-10 - Fibre optic communication subsystem test procedures
• BS-EN-61280-2-2 - Fibre optic communication subsystem test procedures
• BS-EN-61280-2-3 - Fibre optic communication subsystem test procedures
• BS-EN-61280-2-9 - Fibre optic communication subsystem test procedures
• BS-EN-61280-4-1 - Fibre optic communication subsystem test procedures
• BS-EN-61280-4-2 - Fibre-optic communication subsystem test procedures
• BS-EN-61280-4-4 - Fibre optic communication subsystem test procedures
• BS-EN-61663-1 - Lightning protection. Telecommunication lines
• BS-EN-61745 - End-face image analysis procedure for the calibration of optical fibre geometry test sets
• BS-EN-61746 - Calibration of optical time-domain reflectometers (OTDR)
• BS-EN-61746-1 - Calibration of optical time-domain reflectometers (OTDR)
• BS-EN-61746-2 - Calibration of optical time-domain reflectometers (OTDR)
• BS-EN-61978-1 - Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators
• BS-EN-62007-1 - Semiconductor optoelectronic devices for fibre optic system applications
• BS-EN-62007-2 - Semiconductor optoelectronic devices for fibre optic system applications
• BS-EN-62074-1 - Fibre optic interconnecting devices and passive components. Fibre optic WDM devices
• BS-EN-62129-1 - Calibration of wavelength/optical frequency measurement instruments
• BS-EN-62148-1 - Fibre optic active components and devices. Package and interface standards
• BS-EN-62343 - Dynamic modules - General and guidance
• BS-EN-62343-1 - Dynamic modules
• BS-EN-62343-1-3 - Dynamic modules
• BS-EN-62343-3-2 - Dynamic modules
• BS-EN-62343-5-1 - Dynamic modules
• BS-EN-62343-TC - Tracked Changes. Dynamic modules - General and guidance
• BS-EN-62496-1 - Optical circuit boards
• BS-EN-62496-2 - Optical circuit boards. Basic test and measurement procedures
• BS-EN-62496-2-1 - Optical circuit boards
• BS-EN-62496-2-4 - Optical circuit boards. Basic test and measurement procedures
• BS-EN-62496-3 - Optical circuit boards
• BS-EN-62496-3-1 - Optical circuit boards. Performance standard
• BS-EN-62496-4 - Optical circuit boards
• BS-EN-62522 - Calibration of tuneable laser sources
• BS-EN-62572-3 - Fibre optic active components and devices. Reliability standards
• BS-EN-IEC-60728-115 - Cable networks for television signals, sound signals and interactive services
• BS-EN-IEC-61280-1-4 - Fibre optic communication subsystem test procedures
• BS-EN-IEC-61280-4-1 - Fibre-optic communication subsystem test procedures
• BS-EN-IEC-61280-4-3 - Fibre optic communication subsystem test procedures
• BS-EN-IEC-61280-4-5 - Fibre-optic communication subsystem test procedures
• BS-EN-IEC-61281-1 - Fibre optic communication subsystems
• BS-EN-IEC-61744 - Calibration of fibre optic chromatic dispersion test sets
• BS-EN-IEC-61756-1 - Fibre optic interconnecting devices and passive components. Interface standard for fibre management systems
• BS-EN-IEC-62129-3 - Calibration of wavelength/optical frequency measurement instruments
• BS-EN-IEC-62148-1 - Fibre optic active components and devices. Package and interface standards
• BS-EN-IEC-62148-21 - Fibre optic active components and devices. Package and interface standards
• BS-EN-IEC-62148-6 - Fibre optic active components and devices. Package and interface standards
• BS-EN-IEC-62343 - Dynamic modules. Generic specification
• BS-EN-IEC-62343-1 - Dynamic modules
• BS-EN-IEC-62343-2-1 - Dynamic modules
• BS-EN-IEC-62343-3-4 - Dynamic modules
• BS-EN-IEC-62343-5-2 - Dynamic modules
• BS-EN-IEC-62343-TC - Tracked Changes. Dynamic modules. Generic specification
• BS-EN-IEC-62496-2-5 - Optical circuit boards. Basic test and measurement procedures
• BS-EN-IEC-62496-4-1 - Optical circuit boards
• BS-EN-IEC-62496-4-214 - Optical circuit boards
• BS-EN-IEC-62614-1 - Fibre optics. Multimode launch conditions
• BS-IEC-61745 - End-face image analysis procedure for the calibration of optical fibre geometry test sets
• BS-IEC-61756-1 - Fibre optic interconnecting devices and passive components. Interface standard for fibre management systems
• DD-IEC-62538 - Categorization of optical devices
• DD-IEC/PAS60793-1-49 - Optical Fibres, Measurement Methods & Test Procedures, Differential Mode Delay
• DD-IEC/PAS61280-2-10 - Fibre optic communication subsystem test procedures. Digital systems. Time-resolved chirp and alpha-factor measurement of laser transmitters
• DD-IEC/PAS-62074-1 - Fibre optic WDM devices
• PD-CLC-50682 - Consideration on the use of OTDRs to measure return loss of single-mode optical fibre connections
• PD-IEC-60825-17 - Safety of laser products
• PD-IEC-60825-17-TC - Tracked Changes. Safety of laser products
• PD-IEC-61282-1 - Fibre optic communication system design guides
• PD-IEC-61282-10 - Fibre optic communication system design guides
• PD-IEC-61282-11 - Fibre optic communication system design guides
• PD-IEC-61282-12 - Fibre optic communication system design guides
• PD-IEC-61282-13 - Fibre optic communication system design guides
• PD-IEC-61282-14 - Fibre optic communication system design guides
• PD-IEC-61282-15 - Fibre optic communication system design guides
• PD-IEC-61282-16 - Fibre optic communication system design guidelines
• PD-IEC-61282-3 - Fibre optic communication system design guides
• PD-IEC-61282-4 - Fibre optic communication system design guides
• PD-IEC-61282-5 - Fibre optic communication system design guidelines
• PD-IEC-61282-6 - Fibre optic communication system design guides
• PD-IEC-61282-7 - Fibre optic communication system design guides
• PD-IEC-61282-8 - Fibre optic communication system design guides
• PD-IEC-61282-9 - Fibre optic communication system design guides
• PD-IEC-62324 - Single-mode optical fibres. Raman gain efficiency measurement using continuous wave method. Guidance
• PD-IEC-62343-6-10 - Dynamic modules
• PD-IEC-62343-6-11 - Dynamic Modules
• PD-IEC-62343-6-12 - Dynamic modules
• PD-IEC-62343-6-2 - Dynamic modules
• PD-IEC-62343-6-4 - Dynamic modules
• PD-IEC-62343-6-9 - Dynamic modules
• PD-IEC-62572-2 - Fibre optic active components and devices. Reliability standards
• PD-IEC-62572-4 - Fibre optic active components and devices. Reliability standards
• PD-IEC-62614-2 - Fibre optics. Multimode launch conditions
• PD-IEC-62658 - Roadmap of optical circuit boards and their related packaging technologies
• PD-IEC-62721 - Reliability of devices used in fibre optic systems. General and guidance
• PD-IEC-62785 - Guidance on the environmentally conscious design of fibre optics related products and subsystems
• PD-IEC-63100 - Transmitting equipment for radiocommunication. Radio-over-fibre technologies for spectrum measurement. 100-GHz spectrum measurement equipment
• PD-IEC/PAS-61182-12 - Generic requirements for printed board assembly products manufacturing description data and transfer methodology

IEC:

• IEC-60050-731-AM1 - Amendment 1 - International electrotechnical vocabulary - Part 731: Optical fibre communication
• IEC-60050-731-AM2 - Amendment 2 - International electrotechnical vocabulary - Part 731: Optical fibre communication
• IEC-60050-731-AM3 - Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication
• IEC-60050-731-AM4 - Amendment 4 - International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication
• IEC-60050-731-AM5 - Amendment 5 - International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication
• IEC-60050-731-AM6 - Amendment 6 - International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication
• IEC-60728-115 - Cable networks for television signals, sound signals and interactive services - Part 115: In-building optical systems for broadcast signal transmissions
• IEC-60728-13 - Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions
• IEC-60728-13-1 - Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system
• IEC-60793-1-48 - Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion
• IEC-60794-2-20 - Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables
• IEC-60794-3-70 - Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment
• IEC-60794-3-70-RL - Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment
• IEC-60794-5-10 - Optical fibre cables - Part 5-10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing
• IEC-60794-5-20 - Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing
• IEC-60825-17 - Safety of laser products - Part 17: Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems
• IEC-60825-2 - Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCSs)
• IEC-60825-2-1 - Amendment 1 - Safety of Laser Products - Part 2: Safety of Optical Fibre Communication Systems (Ofcs)
• IEC-60825-2-AM 2 - Amendment 2 - Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
• IEC-61280-1-1 - Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable
• IEC-61280-1-3 - Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Measurement of central wavelength, spectral width and additional spectral characteristics
• IEC-61280-1-4 - Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method
• IEC-61280-1-4-RL - Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method
• IEC-61280-2-1 - Fibre optic communication subsystem test procedures - Part 2-1: Digital systems - Receiver sensitivity and overload measurement
• IEC-61280-2-10 - Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters
• IEC-61280-2-2 - Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
• IEC-61280-2-3 - Fibre optic communication subsystem tets procedures - Part 2-3: Digital systems - Jitter and wander measurements
• IEC-61280-2-4 - Part 2-4: Test Procedures for Digital Systems - Bit-Rate Tolerance Measurement, Fibre Opti
• IEC-61280-2-5 - Part 2-5: Test Procedures for Digital Systems - Jitter Transfer Function Measurement
• IEC-61280-4-1 - Fibre-optic communication subsystem test procedures - Part 4-1: Installed cabling plant - Multimode attenuation measurement
• IEC-61280-4-1-AM1 - Amendment 1 - Fibre-optic communication subsystem test procedures - Part 4-1: Installed cabling plant - Multimode attenuation measurement
• IEC-61280-4-2 - Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement
• IEC-61280-4-3 - Fibre optic communication subsystem test procedures - Part 4-3: Installed passive optical networks - Attenuation and optical return loss measurements
• IEC-61280-4-4 - Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links
• IEC-61280-4-5 - Fibre-optic communication subsystem test procedures - Part 4-5: Installed cabling plant - Attenuation measurement of MPO terminated fibre optic cabling plant using test equipment with MPO interfaces
• IEC-61281-1 - Fibre optic communication subsystems - Part 1: Generic specification
• IEC-61282-10 - Fibre optic communication system design guides - Part 10: Characterization of the quality of optical vector-modulated signals with the error vector magnitude
• IEC-61282-11 - Fibre optic communication system design guides - Part 11: Multimode launch conditions
• IEC-61282-12 - Fibre optic communication system design guides - Part 12: In-band optical signal-to-noise ratio (OSNR)
• IEC-61282-13 - Fibre optic communication system design guides - Part 13: Guidance on in-service PMD and CD characterization of fibre optic links
• IEC-61282-14 - Fibre optic communication system design guides - Part 14: Determination of the uncertainties of attenuation measurements in fibre plants
• IEC-61282-14-RL - Fibre optic communication system design guides - Part 14: Determination of the uncertainties of attenuation measurements in fibre plants
• IEC-61282-15 - Fibre optic communication system design guides - Part 15: Cable plant and link - Testing multi-fibre optic cable plant terminated with MPO connectors
• IEC-61282-16 - Fibre optic communication system design guidelines - Part 16: Coherent receivers and transmitters with high-speed digital signal processing
• IEC-61282-2 - Part 2: Multimode & Single-Mode Gbit/S Applications - Gigabit Ethernet Model, Fibre Optic
• IEC-61282-3 - Fibre optic communication system design guides - Part 3: Calculation of link polarization mode dispersion
• IEC-61282-4 - Fibre optic communication system design guides - Part 4: Accommodation and utilization of non-linear effects
• IEC-61282-5 - Fibre optic communication system design guidelines - Part 5: Accommodation and compensation of chromatic dispersion
• IEC-61282-7 - Fibre optic communication system design guides - Part 7: Statistical calculation of chromatic dispersion
• IEC-61282-8 - Fibre optic communication system design guides - Part 8: Calculating dispersion penalty from measured time-resolved chirp data
• IEC-61282-9 - Fibre optic communication system design guides - Part 9: Guidance on polarization mode dispersion measurements and theory
• IEC-61744 - Calibration of fibre optic chromatic dispersion test sets
• IEC-61745 - End-face image analysis procedure for the calibration of optical fibre geometry test sets
• IEC-61746 - Calibration of Optical Time-Domain Reflectometers (Otdr)
• IEC-61746-1 - Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single mode fibres
• IEC-61746-2 - Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres
• IEC-61756-1 - Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance
• IEC-61978-1 - Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
• IEC-61978-1-RL - Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
• IEC-62007-1 - Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
• IEC-62007-1-AM1 - Amendment 1 - Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
• IEC-62007-2 - Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods
• IEC-62074-1 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification
• IEC-62129-1 - Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
• IEC-62129-3 - Calibration of wavelength/optical frequency measurement instruments - Part 3:Optical frequency meters internally referenced to a frequency comb
• IEC-62148-1 - Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance
• IEC-62148-2 - Fibre optic active components and devices - Package and interface standards - Part 2: SFF 10-pin transceivers
• IEC-62148-5 - Fibre optic active components and devices - Package and interface standards - Part 5: SC 1x9 fibre optic modules
• IEC-62148-7 - Part 7: Sff Lc 10-Pin Transceivers, Fibre Optic Active Components & Devices - Package & In
• IEC-62343 - Dynamic modules - Generic specification
• IEC-62343-1 - Dynamic modules - Part 1: Performance standards - General conditions
• IEC-62343-1-3 - Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized)
• IEC-62343-1-AM1 - Amendment 1 - Dynamic modules - Part 1: Performance standards - General conditions
• IEC-62343-2-1 - Dynamic modules - Part 2-1: Reliability qualification - Test template
• IEC-62343-2-1-AM1 - Amendment 1 - Dynamic modules - Part 2-1: Reliability qualification - Test template
• IEC-62343-3-2 - Dynamic modules - Part 3-2: Performance specification templates - Optical channel monitor
• IEC-62343-3-4 - Dynamic modules - Part 3-4: Performance specification templates - Multicast optical switches
• IEC-62343-5-1 - Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement
• IEC-62343-5-2 - Dynamic modules - Part 5-2: Test methods - 1 x N fixed-grid WSS - Dynamic crosstalk measurement
• IEC-62343-6-10 - Dynamic modules - Part 6-10: Design guide - Intermediate controller for multiple dynamic module systems
• IEC-62343-6-11 - Dynamic Modules - Part 6-11: Design guidelines - Software and hardware interface for optical multicast switches
• IEC-62343-6-12 - Dynamic modules - Part 6-12: Design guidelines - Survey results on performance specifications for 1 x N wavelength selective switches
• IEC-62343-6-2 - Dynamic modules - Part 6-2: Design guide - Software and hardware interfaces - Survey results
• IEC-62343-6-4 - Dynamic modules - Part 6-4: Design guides - Reconfigurable optical add/drop multiplexer
• IEC-62343-6-9 - Dynamic modules - Part 6-9: Design Guides - Transient crosstalk measurement results on wavelength selective switch
• IEC-62343-RL - Dynamic modules - Generic specification
• IEC-62496-1 - Optical circuit boards - Part 1: General
• IEC-62496-2 - Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
• IEC-62496-2-1 - Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation
• IEC-62496-2-2 - Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards
• IEC-62496-2-4 - Optical circuit boards - Basic test and measurement procedures - Part 2-4: Optical transmission test for optical circuit boards without input/output fibres
• IEC-62496-2-5 - Optical circuit boards - Basic test and measurement procedures - Part 2-5: Flexibility test for flexible opto-electric circuits
• IEC-62496-3 - Optical circuit boards - Part 3: Performance standards - General and guidance
• IEC-62496-3-1 - Optical circuit boards - Part 3-1: Performance standards - Flexible optical circuit boards using unconnectorized optical glass fibres
• IEC-62496-4 - Optical circuit boards - Part 4: Interface standards - General and guidance
• IEC-62496-4-1 - Optical circuit boards - Part 4-1: Interface standards – Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors
• IEC-62496-4-214 - Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector
• IEC-62538 - Categorization of optical devices
• IEC-62572-4 - Fibre optic active components and devices - Reliability standards - Part 4: Guidelines for optical connector end-face cleaning methods for receptacle style optical transceivers
• IEC-62614 - Fibre optics - Launch condition requirements for measuring multimode attenuation
• IEC-62614-1 - Fibre optics - Multimode launch conditions - Part 1: Launch condition requirements for measuring multimode attenuation
• IEC-62614-2 - Fibre optics - Multimode launch conditions - Part 2: Determination of launch condition requirements for measuring multimode attenuation
• IEC-62627-03-01 - Fibre optic interconnecting devices and passive components - Part 03-01: Reliability - Design of an acceptance test for fibre pistoning failure of connectors during temperature and humidity cycling: demarcation analysis
• IEC-62658 - Roadmap of optical circuit boards and their related packaging technologies
• IEC-62721 - Reliability of devices used in fibre optic systems - General and guidance
• IEC-62785 - Guidance on the environmentally conscious design of fibre optics related products and subsystems
• IEC-63100 - Transmitting equipment for radiocommunication - Radio-over-fibre technologies for spectrum measurement - 100-GHz spectrum measurement equipment
• IEC/PAS-61280-2-10 - Part 2-10: Digital Systems - Time-Resolved Chirp & Alpha-Factor Measurement of Laser Trans
• IEC/PAS-62074-1 - Part 1: Generic Specification, Fibre Optic Wdm Devices
• IEC/PAS-62614 - Fibre Optics - Launch Condition Requirements for Measuring Multimode Attenuation

ISO:

• ISO/IEC-9314-21 - Information technology -- Fibre Distributed Data Interface (FDDI) -- Part 21: Abstract test suite for FDDI physical layer protocol conformance testing (FDDI PHY ATS)

Other SDOs:

• EN-60728-13 - Part 13: Optical Systems for Broadcast Signal Transmissions, Interactive Services
• EN-60728-13-1 - Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system
• EN-60794-2-20 - Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables
• EN-60794-3-70 - Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment
• EN-60794-5-10 - Optical fibre cables - Part 5GÇô10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing
• EN-60794-5-20 - Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing
• EN-60825-2 - Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
• EN-61280-1-1 - Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable
• EN-61280-1-3 - Part 1-3: General Communication Subsystems - Central Wavelength & Spectral Width Measu
• EN-61280-1-4 - Part 1-4: General Communication Subsystems - Light Source Encircled Flux Measurement M
• EN-61280-2-1 - Part 2-1: Digital Systems - Receiver Sensitivity & Overload Measurement, Fibre Optic
• EN-61280-2-2 - Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
• EN-61280-2-3 - Part 2-3: Digital Systems - Jitter & Wander Measurements, Fibre Optic Communication Su
• EN-61280-4-1 - Part 4-1: Installed Cable Plant - Multimode Attenuation Measurement, Fibre Optic Commu
• EN-61280-4-2 - Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement
• EN-61280-4-4 - Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links
• EN-61744 - Calibration of Fibre Optic Chromatic Dispersion Test Sets
• EN-61745 - End-face image analysis procedure for the calibration of optical fibre geometry test sets
• EN-61746-1 - Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres
• EN-61746-2 - Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres
• EN-61978-1 - Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
• EN-62007-1 - Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
• EN-62007-2 - Semiconductor Optoelectronic Devices for Fibre Optic System Applications, Measuring M
• EN-62074-1 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification
• EN-62129-1 - Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
• EN-62149-1 - Fibre optic active components and devices - Performance standards - Part 1: General and guidance
• EN-62343 - Dynamic modules - General and guidance
• EN-62343-1 - Dynamic modules - Part 1: Performance standards - General conditions
• EN-62343-1-3 - Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized)
• EN-62343-3-2 - Dynamic modules - Part 3-2: Performance specification templates - Optical channel monitor
• EN-62343-5-1 - Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement
• EN-62496-1 - Optical Circuit Boards, General
• EN-62496-2 - Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
• EN-62496-2-1 - Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation
• EN-62496-2-2 - Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards
• EN-62496-2-4 - Optical circuit boards - Basic test and measurement procedures - Part 2-4: Optical transmission test for optical circuit boards without input/output fibres
• EN-62496-3 - Optical circuit boards - Part 3: Performance standards - General and guidance
• EN-62496-3-1 - Part 3-1: Flexible Optical Circuit Boards Using Unconnectorized Optical Glass Fibres,
• EN-62496-4 - Optical circuit boards - Part 4: Interface standards - General and guidance
• EN-62522 - Calibration of tuneable laser sources
• EN-IEC-61281-1 - Fibre optic communication subsystems - Part 1: Generic specification
• EN-IEC-62129-3 - Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters internally referenced to a frequency comb (IEC 62129-3:2019)
• EN-IEC-62148-1 - Fibre optic active components and devices. Package and interface standards. General and guidance
• EN-IEC-62343-1 - Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-1:2019)
• EN-IEC-62496-4-1 - Optical circuit boards - Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelve- channel PMT connectors (IEC 62496-4-1:2019)
• IEC-62572-4-RL - Fibre optic active components and devices - Reliability standards - Part 4: Guidelines for optical connector end-face cleaning methods for receptacle style optical transceivers
• JIS-C-5942 - General rules of laser diodes used for recording and playback
• JIS-C-5943 - Measuring methods of laser diodes used for recording and playback
• JIS-C-6113 - Measuring Methods of Transmitting &/or Receiving Modules for Middle & High Speed Fiber