Document Center List of Standards on Diagnostic, Maintenance And Test Equipment Including Repairing Facilities Petrol Stations, See 75.200
ICS Code 43.180
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-F2656 - Standard Test Method for Crash Testing of Vehicle Security Barriers
- ASTM-F3016 - Standard Test Method for Surrogate Testing of Vehicle Impact Protective Devices at Low Speeds
- ASTM-F559 - Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
BSI:
- BS-6913-5 - Operation and maintenance of earth-moving machinery
- BS-7980 - Vehicle lifts. Installation, maintenance, thorough examination and safe use. Code of practice
- BS-AU-162A - Specification for headlamp optical aiming devices
- BS-AU-223A - Design, construction performance and marking of vehicle support stands for cars and light vans. Specification
- BS-AU-224B - Specification for portable wheel ramps for cars and light vans
- BS-AU-242A - Automotive windscreen repair. Code of practice
- BS-AU-242b - Automotive windscreen repair. Code of practice
- BS-EN-12645 - Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing
- BS-EN-1493 - Vehicle lifts
- BS-EN-16652-1 - LPG equipment and accessories. Automotive LPG vehicles workshops
- BS-EN-16652-2 - LPG equipment and accessories. Automotive LPG vehicles workshops
- BS-EN-16661 - Road vehicles and Tyre Pressure Gauges (TPG). Interoperability between Tyre Information Systems (TIS) and TPG. Interfaces and Requirements
- BS-EN-17003 - Road vehicles. Roller brake testers for vehicles of more than 3,5 tons GVW. Safety requirements
- BS-EN-17281 - Safety requirements. Vehicle cleaning equipment
- BS-EN-ISO-17268 - Gaseous hydrogen land vehicle refuelling connection devices
- BS-EN-ISO-18541-1 - Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
- BS-EN-ISO-18541-1-TC - Tracked Changes. Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
- BS-EN-ISO-18541-2 - Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
- BS-EN-ISO-18541-3 - Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
- BS-EN-ISO-18541-4 - Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
- BS-EN-ISO-18541-4-TC - Tracked Changes. Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
- BS-EN-ISO-18541-5 - Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
- BS-EN-ISO-18541-6 - Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
- BS-EN-ISO-18542-1 - Road vehicles. Standardized repair and maintenance information (RMI) terminology
- BS-EN-ISO-18542-2 - Road vehicles. Standardized repair and maintenance information (RMI) terminology
- BS-ISO-13209-3-TC - Tracked Changes. Road vehicles. Open Test sequence eXchange format (OTX)
- BS-ISO-13400-1 - Road vehicles. Diagnostic communication over internet protocol (DoIP)
- BS-ISO-13400-2 - Road vehicles. Diagnostic communication over Internet Protocol (DoIP)
- BS-ISO-13400-3 - Road vehicles. Diagnostic communication over Internet Protocol (DoIP)
- BS-ISO-13400-3-TC - Tracked Changes. Road vehicles. Diagnostic communication over Internet Protocol (DoIP)
- BS-ISO-13400-4 - Road vehicles. Diagnostic communication over Internet Protocol (DoIP)
- BS-ISO-14229 - Road vehicles. Unified diagnostic services (UDS). Specification and requirements
- BS-ISO-14229-1 - Road vehicles. Unified diagnostic services (UDS)
- BS-ISO-14229-1-TC - Tracked Changes. Road vehicles. Unified diagnostic services (UDS)
- BS-ISO-14229-2 - Road vehicles. Unified diagnostic services (UDS)
- BS-ISO-14229-2-TC - Tracked Changes. Road vehicles. Unified diagnostic services (UDS)
- BS-ISO-14229-3 - Road vehicles. Unified diagnostic services (UDS)
- BS-ISO-14229-3-TC - Tracked Changes. Road vehicles. Unified diagnostic services (UDS)
- BS-ISO-14229-4 - Road vehicles. Unified diagnostic services (UDS)
- BS-ISO-14229-5 - Road vehicles. Unified diagnostic services (UDS)
- BS-ISO-14229-5-TC - Tracked Changes. Road vehicles. Unified diagnostic services (UDS)
- BS-ISO-14229-6 - Road vehicles. Unified diagnostic services (UDS)
- BS-ISO-14229-7 - Road vehicles. Unified diagnostic services (UDS)
- BS-ISO-14230-1 - Road vehicles. Diagnostic communication over K-Line (DoK-Line)
- BS-ISO-14230-2 - Road vehicles. Diagnostic communication over K-Line (DoKLine)
- BS-ISO-14230-2-TC - Tracked Changes. Road vehicles. Diagnostic communication over K-Line (DoKLine)
- BS-ISO-15031-3 - Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics
- BS-ISO-15031-3-TC - Tracked Changes. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics
- BS-ISO-15031-4 - Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics
- BS-ISO-15765-2-TC - Tracked Changes. Road vehicles. Diagnostic communication over Controller Area Network (DoCAN)
- BS-ISO-15765-4-TC - Tracked Changes. Road vehicles. Diagnostic communication over Controller Area Network (DoCAN)
- BS-ISO-15765-5 - Road vehicles. Diagnostic communication over Controller Area Network (DoCAN)
- BS-ISO-16232 - Road vehicles. Cleanliness of components and systems
- BS-ISO-16232-1 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-10 - Road vehicles. Cleanliness of components of fluid circuits. Expression of results
- BS-ISO-16232-2 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-3 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-4 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-5 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-6 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-7 - Road vehicles. Cleanliness of components of fluid circuits. Particle sizing and counting by microscopic analysis
- BS-ISO-16232-8 - Road vehicles. Cleanliness of components of fluid circuits
- BS-ISO-16232-9 - Road vehicles. Cleanliness of components of fluid circuits. Particle sizing and counting by automatic light extinction particle counter
- BS-ISO-17268 - Gaseous hydrogen land vehicle refuelling connection devices
- BS-ISO-17949 - Impact test procedures for road vehicles. Seating and positioning procedures for anthropomorphic test devices. Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions
- BS-ISO-19689 - Motorcycles and mopeds. Communication between vehicle and external equipment for diagnostics. Diagnostic connector and related electrical circuits, specification and use
- BS-ISO-20080 - Road vehicles. Information for remote diagnostic support. General requirements, definitions and use cases
- BS-ISO-20730-1 - Road vehicles. Vehicle interface for electronic Periodic Technical Inspection (ePTI)
- BS-ISO-20730-3 - Road vehicles. Vehicle interface for electronic Periodic Technical Inspection (ePTI)
- BS-ISO-22901-1 - Road vehicles. Open diagnostic data exchange (ODX)
- BS-ISO-22901-3 - Road vehicles. Open diagnostic data exchange (ODX)
- BS-ISO-27145-1 - Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements
- BS-ISO-27145-2 - Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements
- BS-ISO-27145-3 - Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements
- BS-ISO-27145-4 - Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements
- BS-ISO-27145-4-TC - Tracked Changes. Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements
- BS-ISO-27145-6 - Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements
- BS-ISO-4113 - Road vehicles. Calibration fluids for diesel injection equipment
- BS-ISO-8820-5 - Road vehicles. Fuse-links
- CWA-15770 - Modelling for Automotive Repair Information, Applications
- DD-ISO/PAS-27145-1 - Road vehicles. Implementation of WWH-OBD communication requirements
- DD-ISO/PAS-27145-2 - Road vehicles. Implementation of WWH-OBD communication requirements
- DD-ISO/PAS-27145-3 - Road vehicles. Implementation of WWH-OBD communication requirements
- DD-ISO/PAS-27145-4 - Road vehicles. Implementation of WWH-OBD communication requirements
- PD-ISO-12349-1 - Road vehicles. Dummies for restraint system testing
- PD-ISO-12349-2 - Road vehicles. Dummies for restraint system testing
- PD-ISO-16250 - Road vehicles. Objective rating metrics for dynamic systems
- PD-ISO-17950 - Impact test procedures for road vehicles. Rear seat positioning procedures for Hybrid III 5th percentile female dummy
- PD-ISO-19222 - Road vehicles. Injury risk curves for the THOR dummy
- PD-ISO-27957 - Road vehicles. Temperature measurement in anthropomorphic test devices. Definition of the temperature sensor locations
- PD-ISO-27957-TC - Tracked Changes. Road vehicles. Temperature measurement in anthropomorphic test devices. Definition of the temperature sensor locations
ISO:
- ISO-10054 - Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter-type smokemeter
- ISO-10305-1 - Road vehicles - Calibration of electromagnetic field strengh measuring devices - Part 1: Devices for measurement of electromagnetic fields at frequencies > 0 Hz
- ISO-10305-2 - Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz
- ISO-10604 - Road vehicles - Measurement equipment for orientation of headlamp luminous beams
- ISO-11530 - Road vehicles - Hydraulic jacks - Specifications
- ISO-11614 - Reciprocating internal combustion compression-ignition engines -- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
- ISO-12349-1 - Road vehicles - Dummies for restraint system testing - Part 1: Adult dummies
- ISO-12349-2 - Road vehicles - Dummies for restraint system testing - Part 2: Child dummies
- ISO-13400-1 - Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 1: General information and use case definition
- ISO-13400-2 - Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 2: Transport protocol and network layer services
- ISO-13400-3 - Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3
- ISO-13400-4 - Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 4: Ethernet-based high-speed data link connector
- ISO-14229 - Road Vehicles - Unified Diagnostic Services (Uds) - Specification & Requirements
- ISO-14229-1 - Road vehicles - Unified diagnostic services (UDS) - Part 1: Application layer
- ISO-14229-1-AM1 - - Amendment 1: Road vehicles - Unified diagnostic services (UDS) - Part 1: Application layer - Amendment 1
- ISO-14229-2 - Road vehicles - Unified diagnostic services (UDS) - Part 2: Session layer services
- ISO-14229-3 - Road vehicles - Unified diagnostic services (UDS) - Part 3: Unified diagnostic services on CAN implementation (UDSonCAN)
- ISO-14229-4 - Road vehicles - Unified diagnostic services (UDS) - Part 4: Unified diagnostic services on FlexRay implementation (UDSonFR)
- ISO-14229-5 - Road vehicles - Unified diagnostic services (UDS) - Part 5: Unified diagnostic services on Internet Protocol implementation (UDSonIP)
- ISO-14229-6 - Road vehicles - Unified diagnostic services (UDS) - Part 6: Unified diagnostic services on K-Line implementation (UDSonK-Line)
- ISO-14229-7 - Road vehicles - Unified diagnostic services (UDS) - Part 7: UDS on local interconnect network (UDSonLIN)
- ISO-14229-8 - Road vehicles - Unified diagnostic services (UDS) - Part 8: UDS on Clock eXtension Peripheral Interface (UDSonCXPI)
- ISO-14229 PACKAGE - ISO 14229 - Road Vehicles Package
- ISO-14230-1 - Road vehicles - Diagnostic communication over K-Line (DoK-Line) - Part 1: Physical layer
- ISO-14230-2 - Road vehicles - Diagnostic communication over K-Line (DoK-Line) - Part 2: Data link layer
- ISO-14230-3 - Road vehicles -- Diagnostic systems -- Keyword protocol 2000 -- Part 3: Application layer
- ISO-14230-4 - Road vehicles -- Diagnostic systems -- Keyword Protocol 2000 -- Part 4: Requirements for emission-related systems
- ISO-15031-3 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits: Specification and use
- ISO-15031-4 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 4: External test equipment
- ISO-15764 - Road vehicles - Extended data link security
- ISO-15765-5 - Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 5: Specification for an in-vehicle network connected to the diagnostic link connector
- ISO-15766 - Road vehicles -- Pedestrian protection -- Targets for the assessment of the biofidelity of pedestrian-leg test devices
- ISO-16232 - Road vehicles - Cleanliness of components and systems
- ISO-16232-1 - Road vehicles - Cleanliness of components of fluid circuits - Part 1: Vocabulary
- ISO-16232-10 - Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of results
- ISO-16232-2 - Road vehicles - Cleanliness of components of fluid circuits - Part 2: Method of extraction of contaminants by agitation
- ISO-16232-3 - Road vehicles - Cleanliness of components of fluid circuits - Part 3: Method of extraction of contaminants by pressure rinsing
- ISO-16232-4 - Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techniques
- ISO-16232-5 - Road vehicles - Cleanliness of components of fluid circuits - Part 5: Method of extraction of contaminants on functional test bench
- ISO-16232-6 - Road vehicles - Cleanliness of components of fluid circuits - Part 6: Particle mass determination by gravimetric analysis
- ISO-16232-7 - Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis
- ISO-16232-8 - Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis
- ISO-16232-9 - Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter
- ISO-16250 - Road vehicles - Objective rating metrics for dynamic systems
- ISO-17268 - Gaseous hydrogen land vehicle refuelling connection devices
- ISO-17949 - Impact test procedures for road vehicles - Seating and positioning procedures for anthropomorphic test devices - Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions
- ISO-17949-AM1 - - Amendment 1
- ISO-17949-AM2 - - Amendment 2
- ISO-17950 - Impact test procedures for road vehicles - Rear seat positioning procedures for Hybrid III 5th percentile female dummy
- ISO-18541-1 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition
- ISO-18541-2 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements
- ISO-18541-3 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements
- ISO-18541-4 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test
- ISO-185414-4 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test
- ISO-18541-5 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 5: Heavy duty specific provision
- ISO-18541-6 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements
- ISO-18542-1 - Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 1: General information and use case definition
- ISO-18542-2 - Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 2: Standardized process implementation requirements, Registration Authority
- ISO-19222 - Road vehicles - Injury risk curves for the THOR dummy
- ISO-19689 - Motorcycles and mopeds - Communication between vehicle and external equipment for diagnostics - Diagnostic connector and related electrical circuits, specification and use
- ISO-20080 - Road vehicles - Information for remote diagnostic support - General requirements, definitions and use cases
- ISO-20080-AM1 - - Amendment 1: Road vehicles - Information for remote diagnostic support - General requirements, definitions and use cases - Amendment 1
- ISO-20730-1 - Road vehicles - Vehicle interface for electronic Periodic Technical Inspection (ePTI) - Part 1: Application and communication requirements
- ISO-20730-2 - Road vehicles - Vehicle interface for electronic Periodic Technical Inspection (ePTI) - Part 2: Application and communication requirements conformance test plan
- ISO-20730-3 - Road vehicles - Vehicle interface for electronic Periodic Technical Inspection (ePTI) - Part 3: Data definitions
- ISO-22901-1 - Road vehicles - Open diagnostic data exchange (ODX) - Part 1: Data model specification
- ISO-22901-2 - Road vehicles - Open diagnostic data exchange (ODX) - Part 2: Emissions-related diagnostic data
- ISO-22901-3 - Road vehicles - Open diagnostic data exchange (ODX) - Part 3: Fault symptom exchange description (FXD)
- ISO-24145-2 - Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 2: Common data dictionary
- ISO-27145-1 - Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 1: General information and use case definition
- ISO-27145-2 - Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 2: Common data dictionary
- ISO-27145-3 - Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 3: Common message dictionary
- ISO-27145-4 - Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 4: Connection between vehicle and test equipment
- ISO-27145-6 - Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 6: External test equipment
- ISO-27957 - Road vehicles - Temperature measurement in anthropomorphic test devices - Definition of the temperature sensor locations
- ISO-3888-1 - Passenger cars - Test track for a severe lane-change manoeuvre - Part 1: Double lane-change
- ISO-3888-2 - Passenger cars - Test track for a severe lane-change manoeuvre - Part 2: Obstacle avoidance
- ISO-3930-1 - Amendment 1: Instruments for Measuring Vehicle Exhaust Emissions
- ISO-4010 - Diesel engines - Calibrating nozzle, delay pintle type
- ISO-4113 - Road vehicles - Calibration fluids for diesel injection equipment
- ISO-7440-1 - Road vehicles - Fuel injection equipment testing - Part 1: Calibrating nozzle and holder assemblies
- ISO-7639 - Road vehicles - Diagnostic systems - Graphical symbols
- ISO-8093 - Road vehicles - Diagnostic testing of electronic systems
- ISO-8720 - Passenger cars - Specifications for mechanical jacks
- ISO-8984-1 - Diesel engines - Testing of fuel injectors - Part 1: Hand-lever-operated testing and setting apparatus
- ISO-9141 - Road vehicles - Diagnostic systems - Requirements for interchange of digital information
- ISO-9141-2 - Road vehicles - Diagnostic systems - Part 2: CARB requirements for interchange of digital information
- ISO-9141-2-1 - Amendment 1 to ISO 9141-2:1994
- ISO-9141-3 - Road vehicles - Diagnostic systems - Part 3: Verification of the communication between vehicle and OBD II scan tool
- ISO-9790 - Road vehicles -- Anthropomorphic side impact dummy -- Lateral impact response requirements to assess the biofidelity of the dummy
- ISO/PAS-27145-1 - Road vehicles - Implementation of WWH-OBD communication requirements - Part 1: General information and use case definition
- ISO/PAS-27145-2 - Road vehicles - Implementation of WWH-OBD communication requirements - Part 2: Common emissions-related data dictionary
- ISO/PAS-27145-3 - Road vehicles - Implementation of WWH-OBD communication requirements - Part 3: Common message dictionary
- ISO/PAS-27145-4 - Road vehicles - Implementation of WWH-OBD communication requirements - Part 4: Connection between vehicle and test equipment
- ISO/PAS-3930 - Instruments for measuring vehicle exhaust emissions - Metrological and technical requirements; Metrological control and performance tests
Other SDOs:
- EN-12645 - Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
- EN-1493 - Vehicle Lifts
- EN-16652-1 - LPG equipment and accessories - Automotive LPG vehicles workshops - Part 1: Working areas and procedures
- EN-16661 - Road vehicles and Tyre Pressure Gauges (TPG) - Interoperability between Tyre Information Systems (TIS) and TPG - Interfaces and Requirements
- EN-ISO-17268 - Gaseous hydrogen land vehicle refuelling connection devices
- EN-ISO-18541-1 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition
- EN-ISO-18541-2 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements
- EN-ISO-18541-3 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements
- EN-ISO-18541-4 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test
- EN-ISO-18542-1 - Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 1: General information and use case definition (ISO 18542-1:2012)
- EN-ISO-18542-2 - Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 2: Standardized process implementation requirements, Registration Authority
- SIS-ISO/PAS-3930 - Instruments for measuring vehicle exhaust emissions - Metrological and technical requirements; Metrological control and performance tests
- SIS-ISO/TR-12349-1 - Road vehicles - Dummies for restraint system testing - Part 1: Adult dummies
- SIS-ISO/TR-12349-2 - Road vehicles - Dummies for restraint system testing - Part 2: Child dummies
- SS-EN-12645 - Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
- SS-EN-13423 - Natural gas vehicles - Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
- SS-EN-1493 - Vehicle lifts
- SS-EN-16652-1 - LPG equipment and accessories - Automotive LPG vehicles workshops - Part 1: Working areas and procedures
- SS-EN-16652-2 - LPG equipment and accessories - Automotive LPG vehicles workshops - Part 2: Personnel competence and training
- SS-EN-16661 - Road vehicles and Tyre Pressure Gauges (TPG) - Interoperability between Tyre Information Systems (TIS) and TPG - Interfaces and Requirements
- SS-EN-16944 - Agricultural machinery and tractors - Standardized access to repair and maintenance information (RMI) - Requirements
- SS-EN-17003 - Road vehicles - Roller brake testers for vehicles of more than 3,5 tons GVW - Safety requirements
- SS-EN-17281 - Safety requirements - Vehicle cleaning equipment
- SS-EN-17507 - Road vehicles - Portable Emission Measuring Systems (PEMS) - Performance assessment
- SS-EN-1829-1 - High-pressure water jet machines - Safety requirements - Part 1: Machines
- SS-EN-ISO-16526-3 - Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
- SS-EN-ISO-17268 - Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2019)
- SS-EN-ISO-18541-1 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition (ISO 18541-1:2021)
- SS-EN-ISO-18541-2 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements (ISO 18541-2:2021)
- SS-EN-ISO-18541-3 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements (ISO 18541-3:2021)
- SS-EN-ISO-18541-4 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test (ISO 18541-4:2021)
- SS-EN-ISO-18541-5 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 5: Heavy duty specific provision (ISO 18541-5:2018)
- SS-EN-ISO-18541-6 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-6:2018)
- SS-EN-ISO-18542-1 - Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 1: General information and use case definition (ISO 18542-1:2012)
- SS-EN-ISO-18542-2 - Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 2: Standardized process implementation requirements, Registration Authority (ISO 18542-2:2014)
- SS-EN-ISO/IEC-27019 - Information technology - Security techniques - Information security controls for the energy utility industry (ISO/IEC 27019:2017, Corrected version 2019-08)
- SS-ISO-10054 - Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter-type smokemeter
- SS-ISO-11614 - Reciprocating internal combustion compression-ignition engines - Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
- SS-ISO-13209-2 - Road vehicles Open Test sequence eXchange format (OTX) Part 2: Core data model specification and requirements (ISO 13209-2:2022, IDT)
- SS-ISO-13209-3 - Road vehicles Open Test sequence eXchange format (OTX) Part 3: Standard extensions and requirements (ISO 13209-3:2022, IDT)
- SS-ISO-13209-4 - Road vehicles Open Test sequence eXchange format (OTX) Part 4: Expanded extensions interface definition (ISO 13209-4:2021, IDT)
- SS-ISO-13216-1 - Child restraint systems - Anchorages in vehicles and attachments to anchorages - Part 1: Seat bight anchorages and attachments ("ISOFIX")
- SS-ISO-13216-1-AM1 - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments - Amendment 1: CRF reduced height specification (ISO 13216-1:1999/Amd 1:2006, IDT)
- SS-ISO-13216-1-AM3 - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments - Amendment 3: Specifications for the detection of use of ISOFIX CRS (ISO 13216-1:1999/Amd 3:2006, IDT)
- SS-ISO-13400-1 - Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 1: General information and use case definition (ISO 13400-1:2011, IDT)
- SS-ISO-13400-2 - Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 2: Transport protocol and network layer services (ISO 13400-2:2019, IDT)
- SS-ISO-13400-3 - Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3 (ISO 13400-3:2016, IDT)
- SS-ISO-13400-4 - Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 4: Ethernet-based high-speed data link connector (ISO 13400-4:2016, IDT)
- SS-ISO-14229 - Road vehicles - Diagnostic systems - Diagnostic services specification
- SS-ISO-14229-1 - Road vehicles - Unified diagnostic services (UDS) - Part 1: Application layer (ISO 14229-1:2020, IDT)
- SS-ISO-14229-1-AM1 - Road vehicles Unified diagnostic services (UDS) Part 1: Application layer Amendment 1 (ISO 14229-1:2020/Amd 1:2022, IDT)
- SS-ISO-14229-2 - Road vehicles Unified diagnostic services (UDS) Part 2: Session layer services (ISO 14229-2:2021, IDT)
- SS-ISO-14229-3 - Road vehicles Unified diagnostic services (UDS) Part 3: Unified diagnostic services on CAN implementation (UDSonCAN) (ISO 14229-3:2022, IDT)
- SS-ISO-14229-4 - Road vehicles - Unified diagnostic services (UDS) - Part 4: Unified diagnostic services on FlexRay implementation (UDSonFR) (ISO 14229-4:2012, IDT)
- SS-ISO-14229-5 - Road vehicles Unified diagnostic services (UDS) Part 5: Unified diagnostic services on Internet Protocol implementation (UDSonIP) (ISO 14229-5:2022, IDT)
- SS-ISO-14229-6 - Road vehicles - Unified diagnostic services (UDS) - Part 6: Unified diagnostic services on K-Line implementation (UDSonK-Line) (ISO 14229-6:2013, IDT)
- SS-ISO-14229-7 - Road vehicles Unified diagnostic services (UDS) Part 7: UDS on local interconnect network (UDSonLIN) (ISO 14229-7:2022, IDT)
- SS-ISO-14230-1 - Road vehicles - Diagnostic communication over K-Line (DoK-Line) - Part 1: Physical layer (ISO 14230-1:2012, IDT)
- SS-ISO-14230-2 - Road vehicles - Diagnostic communication over K-Line (DoK-Line) - Part 2: Data link layer (ISO 14230-2:2016, IDT)
- SS-ISO-14230-3 - Road vehicles - Diagnostic systems - Keyword Protocol 2000 - Part 3: Application layer
- SS-ISO-14230-4 - Road vehicles - Diagnostic systems - Keyword Protocol 2000 - Part 4: Requirements for emission-related systems
- SS-ISO-15031-1 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 1: General information and use case definition (ISO 15031-1:2010, IDT)
- SS-ISO-15031-3 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits: Specification and use (ISO 15031-3:2016, IDT)
- SS-ISO-15031-4 - Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 4: External test equipment (ISO 15031-4:2014, IDT)
- SS-ISO-15764 - Road vehicles - Extended data link security (ISO 15764:2004, IDT)
- SS-ISO-15765-4 - Road vehicles Diagnostic communication over Controller Area Network (DoCAN) Part 4: Requirements for emissions-related systems (ISO 15765-4:2021, IDT)
- SS-ISO-15765-5 - Road vehicles Diagnostic communication over Controller Area Network (DoCAN) Part 5: Specification for an in-vehicle network connected to the diagnostic link connector (ISO 15765-5:2021, IDT)
- SS-ISO-16232 - Road vehicles - Cleanliness of components and systems (ISO 16232:2018, IDT)
- SS-ISO-16232-1 - Road vehicles - Cleanliness of components of fluid circuits - Part 1: Vocabulary (ISO 16232-1:2007, IDT)
- SS-ISO-16232-10 - Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of results (ISO 16232-10:2007, IDT)
- SS-ISO-16232-2 - Road vehicles - Cleanliness of components of fluid circuits - Part 2: Method of extraction of contaminants by agitation (ISO 16232-2:2007, IDT)
- SS-ISO-16232-3 - Road vehicles - Cleanliness of components of fluid circuits - Part 3: Method of extraction of contaminants by pressure rinsing (ISO 16232-3:2007, IDT)
- SS-ISO-16232-4 - Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techniques (ISO 16232-4:2007, IDT)
- SS-ISO-16232-5 - Road vehicles - Cleanliness of components of fluid circuits - Part 5: Method of extraction of contaminants on functional test bench (ISO 16232-5:2007, IDT)
- SS-ISO-16232-6 - Road vehicles - Cleanliness of components of fluid circuits - Part 6: Particle mass determination by gravimetric analysis (ISO 16232-6:2007, IDT)
- SS-ISO-16232-7 - Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis (ISO 16232-7:2007, IDT)
- SS-ISO-16232-8 - Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis (ISO 16232-8:2007, IDT)
- SS-ISO-16232-9 - Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter (ISO 16232-9:2007, IDT)
- SS-ISO-17949 - Impact test procedures for road vehicles - Seating and positioning procedures for anthropomorphic test devices - Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions (ISO 17949:2013, IDT)
- SS-ISO-17949-AM1 - Impact test procedures for road vehicles - Seating and positioning procedures for anthropomorphic test devices - Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions - Amendment 1 (ISO 17949:2013/Amd 1:2017, IDT)
- SS-ISO-17949-AM2 - Impact test procedures for road vehicles - Seating and positioning procedures for anthropomorphic test devices - Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions - Amendment 2 (ISO 17949:2013/Amd 2:2018, IDT)
- SS-ISO-20080 - Road vehicles - Information for remote diagnostic support - General requirements, definitions and use cases (ISO 20080:2019, IDT)
- SS-ISO-20080-AM1 - Road vehicles Information for remote diagnostic support General requirements, definitions and use cases Amendment 1 (ISO 20080:2019/Amd 1:2021, IDT)
- SS-ISO-20730-1 - Road vehicles Vehicle interface for electronic Periodic Technical Inspection (ePTI) Part 1: Application and communication requirements (ISO 20730-1:2021, IDT)
- SS-ISO-20730-2 - Road vehicles Vehicle interface for electronic Periodic Technical Inspection (ePTI) Part 2: Application and communication requirements conformance test plan (ISO 20730-2:2022, IDT)
- SS-ISO-20730-3 - Road vehicles Vehicle interface for electronic Periodic Technical Inspection (ePTI) Part 3: Data definitions (ISO 20730-3:2021, IDT)
- SS-ISO-22901-1 - Road vehicles - Open diagnostic data exchange (ODX) - Part 1: Data model specification (ISO 22901-1:2008, IDT)
- SS-ISO-22901-2 - Road vehicles - Open diagnostic data exchange (ODX) - Part 2: Emissions-related diagnostic data (ISO 22901-2:2011, IDT)
- SS-ISO-22901-3 - Road vehicles - Open diagnostic data exchange (ODX) - Part 3: Fault symptom exchange description (FXD) (ISO 22901-3:2018, IDT)
- SS-ISO-27145-1 - Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 1: General information and use case definition (ISO 27145-1:2012, IDT)
- SS-ISO-27145-2 - Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 2: Common data dictionary (ISO 27145-2:2012, IDT)
- SS-ISO-27145-3 - Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 3: Common message dictionary (ISO 27145-3:2012, IDT)
- SS-ISO-27145-4 - Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 4: Connection between vehicle and test equipment (ISO 27145-4:2016, IDT)
- SS-ISO-27145-6 - Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 6: External test equipment (ISO 27145-6:2015, IDT)
- SS-ISO-3888-1 - Passenger cars - Test track for a severe lane-change manoeuvre - Part 1: Double lane-change (ISO 3888-1:2018, IDT)
- SS-ISO-3888-2 - Passenger cars - Test track for a severe lane-change manoeuvre - Part 2: Obstacle avoidance (ISO 3888-2:2011, IDT)
- SS-ISO-3930 - Instruments for measuring vehicle exhaust emissions (ISO 3930:2000, IDT)
- SS-ISO-4010 - Diesel engines - Calibrating nozzle, delay pintle type (ISO 4010:1998, IDT)
- SS-ISO-9141-2 - Road vehicles - Diagnostic systems - Part 2: CARB requirements for interchange of digital information
- SS-ISO-9141-3 - Road vehicles - Diagnostic systems - Part 3: Verification of the communication between vehicle and OBD II scan tool
- UNE-EN-ISO-18541-4 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test