Document Center List of Standards on Fasteners In General
ICS Code 49.030.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-2A-294 - Spline drives. Wrenching configuration. Metric series
- BS-2SP-94 - Aerospace series. Bushes (plain and flanged), press-fit and thrust washers, oilretaining sintered bronze. Specification
- BS-A-272 - Specification for Hi-torque speed drive recess: dimensions and gauging for countersunk head fasteners
- BS-A-273 - Specification for gauging practice for 100° countersunk head fasteners for flushness control
- BS-A-323 - Bihexagonal drives. Wrenching configuration. Metric series
- BS-EN-16602-70-46 - Space product assurance. Requirements for manufacturing and procurement of threaded fasteners
- BS-EN-2786 - Aerospace series. Electrolytic silver plating of fasteners
- BS-EN-3043 - Aerospace series. Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286). Classification: 900 MPa/650 C, manufacturing method optional. Technical specification
- BS-EN-3201 - Aerospace series. Holes for metric threaded fasteners. Design standard
- BS-EN-3368 - Aerospace series. Aerospace design standard. Holes for locating pins
- BS-EN-3782 - Aerospace series. Holes for 100 countersunk head screws. Design standard
- BS-EN-4014 - Aerospace series. Inserts, thickwall, self-locking. Design standard
- BS-EN-4166 - Aerospace series. Clips, spring tension, three parts. PTFE bushes
- BS-EN-4167 - Aerospace series. Clips, spring tension, three parts. Inner clips in heat resisting steel FE-PA2601 (A286)
- BS-EN-4853 - Aerospace series. Externally threaded fastener, 100 countersunk normal head, Spiral Drive Recess. Classification: 1 100 MPa (at ambient temperature)/425 C
- BS-ISO-4579 - Aerospace. Drives, internal, TORX PARALOBE drive. Geometrical definition, gaging and technical requirements
- BS-ISO-4580 - Aerospace. Drives, internal, TORX PARALOBE driver bit. Geometrical definition, gaging and technical requirements
- BS-SP-94 - Specification for bronze oil-retaining bushes and thrust washers. For aircraft
ISO:
- ISO-4579 - Aerospace - Drives, internal, TORX® PARALOBE® drive - Geometrical definition, gaging and technical requirements
- ISO-4580 - Aerospace - Drives, internal, TORX® PARALOBE® driver bit - Geometrical definition, gaging and technical requirements
Other SDOs:
- EN-16602-70-46 - Space product assurance - Requirements for manufacturing and procurement of threaded fasteners
- EN-2786 - Aerospace Series - Electrolytic Silver Plating of Fasteners
- EN-3043 - Aerospace Series, Fasteners, Externally Threaded, in Heat Resisting Steel Fe Pa92Ht (a
- EN-3201 - Aerospace Series, Holes for Metric Threaded Fasteners, Design Standards
- EN-3368 - Aerospace Series - Aerospace Design Standard - Holes for Locating Pins
- EN-3782 - Aerospace Series - Holes for 100 Degrees Countersunk Head Screws - Design Standard
- SS-EN-16602-70-46 - Space product assurance - Requirements for manufacturing and procurement of threaded fasteners
- SS-EN-2264 - Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (atambient temperature)/235 degrees Celsius
- SS-EN-2650 - Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 degrees Celsius
- SS-EN-2651 - Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 degrees Celsius
- SS-EN-2653 - Aerospace series - Screws, 100 degrees countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 degrees Celsius
- SS-EN-2654 - Aerospace series - Screws, 100 degrees countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 degrees Celsius
- SS-EN-2753 - Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/235 degrees Celsius
- SS-EN-2786 - Aerospace series - Electrolytic silver plating of fasteners
- SS-EN-2870 - Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 degrees Celsius
- SS-EN-2874 - Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315 degrees Celsius
- SS-EN-2886 - Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 degrees Celsius
- SS-EN-2897 - Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 degrees Ceslius
- SS-EN-2948 - Aerospace series - Washers, tab, in heat resisting steel, passivated
- SS-EN-2949 - Aerospace series - Washers, wire locking, in corrosion resisting steel, passivated
- SS-EN-3035 - Aerospace series - Screws, 100 degrees countersunk normal head, offset cruciform recess, close tolerance normal shank,short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperatur)/235degrees Celsius
- SS-EN-3037 - Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification:1100 MPa (at ambient temperatur)/315 degrees Celsius
- SS-EN-3038 - Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperatur)/425 degreesCelsius
- SS-EN-3043 - Aerospace series - Fasteners, externally threaded, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa/650 degrees Celsius, manufacturing method optional - Technical specification
- SS-EN-3064 - Aerospace series - Shank nuts, self-locking, serrated - Installationprocedure
- SS-EN-3065 - Aerospace series - Installation holes for self-locking, serrated shank nuts - Design standard
- SS-EN-3149 - Aerospace series - Shank nuts - Installation holes, 60 degrees swage, flanges - Design standard
- SS-EN-3201 - Aerospace series - Holes for metric threaded fasteners - Design standard
- SS-EN-3304 - Aerospace series - Screws, 100 degrees countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 degrees Celsius
- SS-EN-3305 - Aerospace series - Screws, 100 degrees countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 degrees Celsius
- SS-EN-3306 - Aerospace series - Screws, 100 degrees countersunk normal head, offset cruciform recess, threaded to head, in titaniumalloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 degrees Celsius
- SS-EN-3307 - Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 degrees Celsius
- SS-EN-3308 - Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315degrees Celsius
- SS-EN-3368 - Aerospace series - Aerospace design standard - Holes for locating pins
- SS-EN-3381 - Aerospace series - Screws, 100 degrees countersunk normal head, offset cruciform recess, close tolerance normal shank,short thread, in titanium, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 degrees Celsius
- SS-EN-3612 - Aerospace series - Undercuts for splines - Design standard
- SS-EN-3642 - Aerospace series - Rivets, solid, 100 degrees countersunk normal head with dome, in titanium TI-PO2, anodized, inch based series
- SS-EN-3643 - Aerospace series - Rivets, solid, 100 degrees countersunk normal head, in titanium TI-PO2, anodized, inch based series
- SS-EN-3644 - Aerospace series - Rivets, solid, 100 degrees universal head, in titanium TI-PO2, anodized, inch based series
- SS-EN-3740 - Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/315 °C
- SS-EN-3759 - Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel,passivated - Classification: 1100 MPa (at ambienttemperature)/425 degrees Celsius
- SS-EN-3760 - Aerospace series - Screws, 100 degrees countersunk normal head, offset cruciform recess, threaded to head, in heat andcorrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 degrees Celsius
- SS-EN-3782 - Aerospace series - Holes for 100 degrees countersunk head screws - Design standard
- SS-EN-3911 - Aerospace series - Six lobe recess - Geometrical definition
- SS-EN-4619 - Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys - Installation and removal procedure
- SS-EN-4620 - Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys - Design standard
- SS-EN-4621 - Aerospace series - Inserts, MJ threads, self-locking, self-broaching keys - Technical specification
- SS-EN-4809 - Aerospace series - Flange couplings - Gasket seal with fluorocarbon seal on aluminium plate with 3 fastening holes - Inch series
- SS-EN-4811 - Aerospace series - Flange couplings - Gasket seal with fluorocarbon seal on aluminium plate with 4 fastening holes - Inch series
- SS-EN-4812 - Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes - Inch series
- SS-EN-4814 - Aerospace series - Flange couplings up to 21 000 kPa - Technical specification - Inch series
- SS-EN-4816 - Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal - Technical specification - Inch series