Document Center List of Standards on Industrial Trucks Including Forklift Trucks, Sliding Platforms, Etc. Trucks And Trailers, See 43.080.10
ICS Code 53.060
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
BSI:
- BS-3810-1 - Glossary of terms used in materials handling. Terms used in connection with pallets, stillages, hand and powered trucks
- BS-3810-2 - Glossary of terms used in materials handling Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling)
- BS-3810-3 - Glossary of terms used in materials handling. Terms used in connection with pneumatic and hydraulic handling
- BS-3810-4 - Glossary of terms used in materials handling. Terms used in connection with cranes
- BS-3810-5 - Glossary of terms used in materials handling. Terms used in connection with lifting tackle
- BS-3810-6 - Glossary of terms used in materials handling. Terms used in connection with pulley blocks
- BS-4430-2 - Recommendations for the safety of powered industrial trucks. Operation and maintenance
- BS-5777 - Methods of test for verification of stability of pallet stackers and high lift platform trucks
- BS-7178 - Specification for construction and layout of pedals of self-propelled industrial trucks sit-down rider-controlled
- BS-AU-50-1.5.1 - Tyres and wheels. Tyres. Industrial vehicle tyres
- BS-AU-50-1.5.3 - Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for pneumatic tyres (metric series) on 5° tapered or flat base rims: load ratings
- BS-AU-50-1.5.6 - Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for cylindrical and conical base rubber solid tyres (metric series), designation, dimensions and marking
- BS-AU-50-1-5D - Tyres and wheels. Tyres. Industrial vehicle tyres
- BS-EN-1175-2 - Safety of industrial trucks. Electrical requirements
- BS-EN-12053 - Safety of industrial trucks. Test methods for measuring noise emissions
- BS-EN-12895 - Industrial trucks. Electromagnetic compatibility
- BS-EN-13059 - Safety of industrial trucks. Test methods for measuring vibration
- BS-EN-13490 - Mechanical vibration. Industrial trucks. Laboratory evaluation and specification of operator seat vibration
- BS-EN-1459 - Safety of industrial trucks. Self-propelled variable reach trucks
- BS-EN-1459-1 - Rough-terrain trucks. Safety requirements and verification
- BS-EN-1459-1-TC - Tracked Changes. Rough-terrain trucks. Safety requirements and verification
- BS-EN-1459-2 - Rough-terrain trucks. Safety requirements and verification
- BS-EN-1459-3 - Rough-terrain trucks. Safety requirements and verification
- BS-EN-1459-4 - Rough-terrain trucks. Safety requirements and verification
- BS-EN-1459-5 - Rough-terrain trucks. Safety requirements and verification
- BS-EN-15000 - Safety of industrial trucks. Self propelled variable reach trucks. Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters
- BS-EN-1526 - Safety of industrial trucks. Additional requirements for automated functions on trucks
- BS-EN-1551 - Safety of industrial trucks. Self propelled trucks over 10 000 kg capacity
- BS-EN-15830 - Rough-terrain variable reach trucks. Visibility. Test methods and verification
- BS-EN-16203 - Safety of Industrial Trucks. Dynamic tests for verification of lateral stability. Counterbalanced Trucks
- BS-EN-16307-1 - Industrial trucks. Safety requirements and verification
- BS-EN-16307-2 - Industrial trucks. Safety requirements and verification
- BS-EN-16307-5 - Industrial trucks. Safety requirements and verification
- BS-EN-16307-5-TC - Tracked Changes. Industrial trucks. Safety requirements and verification
- BS-EN-16307-6 - Industrial trucks. Safety requirements and verification
- BS-EN-16796-1 - Energy efficiency of Industrial trucks. Test methods
- BS-EN-16796-2 - Energy efficiency of Industrial trucks. Test methods
- BS-EN-16796-3 - Energy efficiency of Industrial trucks. Test methods
- BS-EN-16796-4 - Energy efficiency of Industrial trucks. Test methods
- BS-EN-16796-6 - Energy efficiency of Industrial trucks. Test methods
- BS-EN-16842-1 - Powered industrial trucks. Visibility. Test methods and verification
- BS-EN-16842-2 - Powered industrial trucks. Visibility. Test methods and verification
- BS-EN-16842-3 - Powered industrial trucks. Visibility. Test methods and verification
- BS-EN-16842-5 - Powered industrial trucks. Visibility. Test methods and verification
- BS-EN-16842-6 - Powered industrial trucks. Visibility. Test methods and verification
- BS-EN-16842-7 - Powered industrial trucks. Visibility. Test methods and verification
- BS-EN-16842-8 - Powered industrial trucks. Visibility-Test methods and verification
- BS-EN-16842-9 - Powered industrial trucks - Visibility - Test methods and verification Part 9: Order-picking, lateral- and front-stacking trucks with elevating operator position
- BS-EN-1726-1 - Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. General requirements
- BS-EN-1726-2 - Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N
- BS-EN-17314 - Industrial trucks. Specifications and test methods. Operator restraint systems other than lap-type seat belts
- BS-EN-1755 - Industrial trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres
- BS-EN-1755-TC - Tracked Changes. Industrial trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres
- BS-EN-1757 - Safety of industrial trucks. Pedestrian propelled industrial platform trucks
- BS-EN-1757-1 - Safety of industrial trucks. Pedestrian propelled trucks
- BS-EN-1757-2 - Safety of industrial trucks. Pedestrian propelled trucks. Pallet trucks
- BS-EN-1757-3 - Safety of industrial trucks. Pedestrian propelled trucks
- BS-EN-1757-4 - Safety of industrial trucks. Pedestrian propelled trucks. Scissor lift pallet-trucks
- BS-EN-ISO-18063-2 - Rough-terrain trucks. Visibility test methods and their verification
- BS-EN-ISO-21281 - Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks. Rules for the construction and layout of pedals
- BS-EN-ISO-24134 - Industrial trucks. Additional requirements for automated functions on trucks
- BS-EN-ISO-3691-1 - Industrial trucks. Safety requirements and verification
- BS-EN-ISO-3691-2 - Industrial trucks. Safety requirements and verification
- BS-EN-ISO-3691-2-TC - Tracked Changes. Industrial trucks. Safety requirements and verification
- BS-EN-ISO-3691-3 - Industrial trucks. Safety requirements and verification
- BS-EN-ISO-3691-4 - Industrial trucks. Safety requirements and verification
- BS-EN-ISO-3691-4-TC - Tracked Changes. Industrial trucks. Safety requirements and verification
- BS-EN-ISO-3691-5 - Industrial trucks. Safety requirements and verification
- BS-EN-ISO-3691-6 - Industrial trucks. Safety requirements and verification
- BS-EN-ISO-3691-6-TC - Tracked Changes. Industrial trucks. Safety requirements and verification
- BS-ISO-10525 - Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above. Additional stability tests
- BS-ISO-10658 - Industrial trucks operating in special conditions of stacking with load laterally displaced by powered devices. Additional stability test
- BS-ISO-10896-1 - Rough-terrain trucks. Safety requirements and verification
- BS-ISO-10896-2 - Rough-terrain trucks. Safety requirements and verification
- BS-ISO-10896-5 - Rough-terrain trucks. Safety requirements and verification
- BS-ISO-10896-6 - Rough-terrain trucks. Safety requirements and verification
- BS-ISO-10896-6-TC - Rough-terrain trucks. Safety requirements and verification
- BS-ISO-10896-7 - Rough-terrain trucks. Safety requirements and verification
- BS-ISO-11525-1 - Rough-terrain trucks. Safe use requirements
- BS-ISO-11525-2 - Rough-terrain trucks. Safe use requirements
- BS-ISO-11525-2-TC - Tracked Changes. Rough-terrain trucks. Safe use requirements
- BS-ISO-11525-4 - Rough-terrain trucks. User requirements
- BS-ISO-11525-5 - Rough-terrain trucks. User requirements
- BS-ISO-13284-TC - Tracked Changes. Industrial trucks. Fork arm extensions and telescopic fork arms. Technical characteristics and strength requirements
- BS-ISO-13562-1 - Industrial variable-reach trucks
- BS-ISO-13562-2 - Industrial variable-reach trucks
- BS-ISO-13563-1 - Single side loading fork-lift trucks
- BS-ISO-13564-1 - Powered industrial trucks. Test methods for verification of visibility
- BS-ISO-15794 - Bi-directional and multi-directional fork-lift trucks. Stability tests
- BS-ISO-15870 - Powered industrial trucks. Safety signs and hazard pictorials. General principles
- BS-ISO-15871 - Industrial trucks. Specifications for indicator lights for container handling and grappler arm operations
- BS-ISO-18063-1 - Rough-terrain trucks. Visibility. Test methods and their verification
- BS-ISO-18479-1 - Rough-terrain trucks. Non-integrated personnel work platforms
- BS-ISO-18479-2 - Rough-terrain trucks. Non-integrated personnel work platforms
- BS-ISO-20297-1 - Industrial trucks. Lorry-mounted trucks
- BS-ISO-20297-2 - Industrial trucks. Lorry-mounted trucks
- BS-ISO-20898 - Industrial trucks. Electrical requirements
- BS-ISO-21262 - Industrial trucks. Safety rules for application, operation and maintenance
- BS-ISO-22915-10 - Industrial trucks. Verification of stability
- BS-ISO-22915-10-TC - Tracked Changes. Industrial trucks. Verification of stability
- BS-ISO-22915-11 - Industrial trucks. Verification of stability
- BS-ISO-22915-12 - Industrial trucks. Verification of stability
- BS-ISO-22915-12-TC - Tracked Changes. Industrial trucks. Verification of stability
- BS-ISO-22915-13 - Industrial trucks. Verification of stability
- BS-ISO-22915-15 - Industrial trucks. Verification of stability
- BS-ISO-22915-15-TC - Tracked Changes. Industrial trucks. Verification of stability
- BS-ISO-22915-16 - Industrial trucks. Verification of stability
- BS-ISO-22915-17 - Industrial trucks. Verification of stability
- BS-ISO-22915-2 - Industrial trucks. Verification of stability
- BS-ISO-22915-20 - Industrial trucks. Verification of stability
- BS-ISO-22915-20-TC - Tracked Changes. Industrial trucks. Verification of stability
- BS-ISO-22915-21 - Industrial trucks. Verification of stability
- BS-ISO-22915-22 - Industrial trucks. Verification of stability
- BS-ISO-22915-24 - Industrial trucks. Verification of stability
- BS-ISO-22915-2-TC - Tracked Changes. Industrial trucks. Verification of stability
- BS-ISO-22915-3 - Industrial trucks. Verification of stability
- BS-ISO-22915-4 - Industrial trucks. Verification of stability
- BS-ISO-22915-5 - Industrial trucks. Verification of stability
- BS-ISO-22915-7 - Industrial trucks. Verification of stability
- BS-ISO-22915-7-TC - Tracked Changes. Industrial trucks. Verification of stability
- BS-ISO-22915-8 - Industrial trucks. Verification of stability
- BS-ISO-22915-8-TC - Tracked Changes. Industrial trucks. Verification of stability
- BS-ISO-22915-9 - Industrial trucks. Verification of stability
- BS-ISO-2328 - Fork-lift trucks. Hook-on type fork arms and fork arm carriages. Mounting dimensions
- BS-ISO-2330 - Fork-lift trucks. Fork arms. Technical characteristics and testing
- BS-ISO-23308-1 - Energy efficiency of industrial trucks. Test methods
- BS-ISO-23308-2 - Energy efficiency of industrial trucks. Test methods
- BS-ISO-23308-3 - Energy efficiency of industrial trucks. Test methods
- BS-ISO-23434-1 - Industrial trucks. Sustainability
- BS-ISO-23434-2 - Industrial trucks. Sustainability
- BS-ISO-23676 - Rough-terrain trucks. Operator training. Content and methods
- BS-ISO-24134 - Industrial trucks. Additional requirements for automated functions on trucks
- BS-ISO-3739-3 - Industrial tyres and rims
- BS-ISO-3739-3-TC - Tracked Changes. Industrial tyres and rims
- BS-ISO-5053-1 - Industrial trucks. Vocabulary
- BS-ISO-5053-2 - Industrial trucks. Vocabulary
- BS-ISO-5057-TC - Tracked Changes. Industrial trucks. Inspection and repair of fork arms in service on forklift trucks
- BS-ISO-509 - Pallet trucks. Principal dimensions
- BS-ISO-5766 - Pallet stackers and high-lift platform trucks. Stability tests
- BS-ISO-6055 - Industrial trucks. Overhead guards. Specification and testing
- BS-ISO-6055-TC - Tracked Changes. Industrial trucks. Overhead guards. Specification and testing
- BS-ISO-6292 - Powered industrial trucks and tractors. Brake performance and component strength
- BS-ISO-8379 - Industrial trucks. Rough terrain trucks. Stability tests
- DD-ISO-3691-7 - Industrial trucks. Safety requirements and verification
- PAS-90 - Specification for safe working practice for on-site maintenance and repair of industrial trucks
- PD-CEN-1459-6 - Rough-terrain trucks. Safety requirements and verification
- PD-CEN-1459-8 - Rough-terrain trucks. Safety requirements and verification
- PD-ISO-29944 - Powered industrial trucks and tractors. Brake performance. Determination of measurement procedures
- PD-ISO-3691-8 - Industrial trucks. Safety requirements and verification
ISO:
- ISO-1044 - Industrial trucks -- Lead-acid traction batteries for electric trucks -- Preferred voltages
- ISO-10525 - Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above -- Additional stability tests
- ISO-10896-1 - Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks
- ISO-10896-2 - Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing trucks
- ISO-10896-4 - Rough-terrain trucks - Safety requirements and verification - Part 4: Additional requirements for variable-reach trucks handling freely suspended loads
- ISO-10896-5 - Rough-terrain trucks - Safety requirements and verification - Part 5: Interface between rough-terrain truck and integrated personnel work platform
- ISO-10896-6 - Rough-terrain trucks - Safety requirements and verification - Part 6: Tilting operators cabs
- ISO-10896-6-AM1 - - Amendment 1
- ISO-10896-7 - Rough-terrain trucks - Safety requirements and verification - Part 7: Longitudinal load moment systems
- ISO-11525-1 - Rough-terrain trucks - Safe use requirements - Part 1: Variable-reach trucks
- ISO-11525-2 - Rough-terrain trucks - Safe use requirements - Part 2: Slewing variable-reach trucks
- ISO-11525-4 - Rough-terrain trucks - User requirements - Part 4: Additional requirements for variable-reach trucks handling freely suspended loads
- ISO-11525-5 - Rough-terrain trucks - User requirements - Part 5: Interface between rough-terrain truck and integrated personnel work platform
- ISO-13284 - Industrial trucks - Fork arm extensions and telescopic fork arms - Technical characteristics and strength requirements
- ISO-13562-1 - Industrial variable-reach trucks -- Part 1: Stability tests
- ISO-13562-2 - Industrial variable-reach trucks -- Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above
- ISO-13563-1 - Single side loading fork-lift trucks -- Part 1: Stability tests
- ISO-13563-2 - Single side loading fork-lift trucks -- Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above
- ISO-13564-1 - Powered industrial trucks - Test methods for verification of visibility - Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
- ISO-15870 - Powered industrial trucks -- Safety signs and hazard pictorials -- General principles
- ISO-15871 - Industrial trucks - Specifications for indicator lights for container handling and grappler arm operations
- ISO-1756 - Industrial trucks -- Dimensions of stillages -- Connection gauge
- ISO-18063-1 - Rough-terrain trucks - Visibility - Test methods and their verification - Part 1: Variable-reach trucks
- ISO-18063-2 - Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing rough-terrain variable-reach trucks
- ISO-18479-1 - Rough-terrain trucks - Non-integrated personnel work platforms - Part 1: Design, safety requirements and verification
- ISO-18479-2 - Rough-terrain trucks - Non-integrated personnel work platforms - Part 2: User requirements
- ISO-20297-1 - Industrial trucks - Lorry-mounted trucks - Part 1: Safety requirements and verification
- ISO-20297-2 - Industrial trucks - Lorry-mounted trucks - Part 2: Safe use requirements
- ISO-20898 - Industrial trucks - Electrical requirements
- ISO-21281 - Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks - Rules for the construction and layout of pedals
- ISO-22877 - Castors and wheels - Vocabulary, symbols and multilingual terminology
- ISO-22878 - Castors and wheels - Test methods and apparatus
- ISO-22881 - Castors and wheels - Requirements for use on manually propelled equipment for institutional applications
- ISO-22883 - Castors and wheels - Requirements for applications up to 1,1 m/s (4 km/h)
- ISO-22884 - Castors and wheels - Requirements for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h)
- ISO-22915-1 - Industrial trucks - Verification of stability - Part 1: General
- ISO-22915-10 - Industrial trucks - Verification of stability - Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
- ISO-22915-11 - Industrial trucks - Verification of stability - Part 11: Industrial variable-reach trucks
- ISO-22915-12 - Industrial trucks - Verification of stability - Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer
- ISO-22915-13 - Industrial trucks - Verification of stability - Part 13: Rough-terrain trucks with mast
- ISO-22915-14 - Industrial trucks - Verification of stability - Part 14: Rough-terrain variable-reach trucks
- ISO-22915-15 - Industrial trucks - Verification of stability - Part 15: Counterbalanced trucks with articulated steering
- ISO-22915-16 - Industrial trucks - Verification of stability - Part 16: Pedestrian-propelled trucks
- ISO-22915-17 - Industrial trucks - Verification of stability - Part 17: Towing tractors, burden and personnel carriers
- ISO-22915-2 - Industrial trucks - Verification of stability - Part 2: Counterbalanced trucks with mast
- ISO-22915-20 - Industrial trucks - Verification of stability - Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
- ISO-22915-21 - Industrial trucks - Verification of stability - Part 21: Order-picking trucks with operator position elevating above 1 200 mm
- ISO-22915-22 - Industrial trucks - Verification of stability - Part 22: Lateral- and front-stacking trucks with and without elevating operator position
- ISO-22915-24 - Industrial trucks - Verification of stability - Part 24: Slewing variable-reach rough-terrain trucks
- ISO-22915-3 - Industrial trucks - Verification of stability - Part 3: Reach and straddle trucks
- ISO-22915-4 - Industrial trucks - Verification of stability - Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height
- ISO-22915-4-AM1 - - Amendment 1
- ISO-22915-5 - Industrial trucks - Verification of stability - Part 5: Single-side-loading trucks
- ISO-22915-7 - Industrial trucks - Verification of stability - Part 7: Bidirectional and multidirectional trucks
- ISO-22915-8 - Industrial trucks - Verification of stability - Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated
- ISO-22915-9 - Industrial trucks - Verification of stability - Part 9: Counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer
- ISO-2328 - Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions
- ISO-2330 - Fork-lift trucks - Fork arms - Technical characteristics and testing
- ISO-23308-1 - Energy efficiency of industrial trucks - Test methods - Part 1: General
- ISO-23308-2 - Energy efficiency of industrial trucks - Test methods - Part 2: Operator controlled self propelled trucks, towing and burden carrier trucks
- ISO-23308-3 - Energy efficiency of industrial trucks - Test methods - Part 3: Container handling lift trucks
- ISO-2331 - Fork lift trucks -- Hook-on type fork arms -- Vocabulary
- ISO-23434-1 - Industrial trucks - Sustainability - Part 1: Vocabulary
- ISO-23434-2 - Industrial trucks - Sustainability - Part 2: Factors and reporting
- ISO-23676 - Rough-terrain trucks - Operator training - Content and methods
- ISO-24134 - Industrial trucks - Additional requirements for automated functions on trucks
- ISO-24135-1 - Industrial trucks - Specifications and test methods for operator restraint systems - Part 1: Lap-type seat belts
- ISO-29944 - Powered industrial trucks and tractors - Brake performance - Determination of measurement procedures
- ISO-3287 - Powered industrial trucks -- Symbols for operator controls and other displays
- ISO-3691 - Powered industrial trucks - Safety code
- ISO-3691-1 - Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
- ISO-3691-2 - Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks
- ISO-3691-3 - Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
- ISO-3691-3-AM1 - - Amendment 1: Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads - Amendment 1
- ISO-3691-4 - Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial trucks and their systems
- ISO-3691-5 - Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks
- ISO-3691-5-AM1 - - Amendment 1
- ISO-3691-6 - Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers
- ISO-3691-7 - Industrial trucks - Safety requirements and verification - Part 7: Regional requirements for countries within the European Community
- ISO-3691-8 - Industrial trucks - Safety requirements and verification - Part 8: Regional requirements for countries outside the European Community
- ISO-3691-AM1 - Amendment 1 to ISO 3691:1980
- ISO-3739-3 - Industrial tyres and rims - Part 3: Rims
- ISO-5053 - Powered industrial trucks -- Terminology
- ISO-5053-1 - Industrial trucks - Vocabulary - Part 1: Types of industrial trucks
- ISO-5053-2 - Industrial trucks - Vocabulary - Part 2: Fork arms and attachments
- ISO-5057 - Industrial trucks - Inspection and repair of fork arms in service on fork-lift trucks
- ISO-5766 - Pallet stackers and high-lift platform trucks - Stability tests
- ISO-5767 - Industrial Trucks Operating in Special Condition of Stackingwith Mast Tilted Forward - Ad
- ISO-6055 - Industrial trucks - Overhead guards - Specification and testing
- ISO-6292 - Powered industrial trucks and tractors - Brake performance and component strength
- ISO-8379 - Rough terrain trucks -- Stability tests
- ISO-938 - Hand-operated stillage trucks - Principal dimensions
- ISO/DIS-3691-4 - Industrial trucks -- Safety requirements and verification -- Part 4: Driverless industrial trucks and their systems
Other SDOs:
- BS-EN-16842-10 - Powered industrial trucks. Visibility. Test methods and verification
- DIN-EN-12053 - Safety of Industrial Trucks - Test Methods for Measuring Noise Emissions
- DIN-EN-13059 - Safety of Industrial Trucks - Test Methods for Measuring Vibration
- DIN-EN-1726-1/A1 - Safety of industrial trucks - Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N - Part 1: General requirements; German version EN 1726-1:1998/A1:2003
- DIN-EN-ISO-21281 - Construction & Layout of Pedals of Self-Propelled Sit-Down Rider-Controlled Industrial
- EN-1175-1 - Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
- EN-1175-2 - Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
- EN-1175-3 - Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
- EN-12895 - Industrial trucks - Electromagnetic compatibility
- EN-13059 - Safety of Industrial Trucks - Test Methods for Measuring Vibration
- EN-13490 - Mechanical Vibration, Industrial Trucks, Laboratory Evaluation & Specification of Oper
- EN-1459 - Safety of industrial trucks - Self-propelled variable reach trucks
- EN-1459-1 - Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks
- EN-1459-2 - Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
- EN-1459-3 - Rough-terrain trucks - Safety requirements and verification - Part 3: Interface between the variable-reach truck and the work platform
- EN-15000 - Safety of Industrial Trucks - Self Propelled Variable Reach Trucks - Specification, P
- EN-1526 - Safety of Industrial Trucks - Additional Requirements for Automated Functions on Truck
- EN-15830 - Rough-terrain variable reach trucks - Visibility - Test methods and verification
- EN-16203 - Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks
- EN-16307-1 - Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
- EN-16307-5 - Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
- EN-16307-6 - Industrial trucks - Safety requirements and verification - Part 6: Supplementary requirements for burden and personnel carriers
- EN-16796-1 - Energy efficiency of Industrial trucks - Test methods - Part 1: General
- EN-16796-2 - Energy efficiency of Industrial trucks - Test methods - Part 2: Operator controlled self-propelled trucks, towing tractors and burden-carrier trucks
- EN-16796-3 - Energy efficiency of Industrial trucks - Test methods - Part 3: Container handling lift trucks
- EN-16796-4 - Energy efficiency of Industrial trucks - Test methods - Part 4: Variable-reach rough-terrain trucks
- EN-16842-1 - Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
- EN-16842-2 - Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10000 kg capacity
- EN-16842-4 - Powered industrial trucks - Visibility - Test methods and verification - Part 4: Industrial variable reach trucks up to and including 10000 kg capacity
- EN-16842-6 - Powered industrial trucks - Visibility - Test methods and verification - Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10000 kg capacity
- EN-16842-7 - Powered industrial trucks - Visibility - Test methods and verification - Part 7: Variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length and longer
- EN-1755 - Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
- EN-1757-3 - Part 3: Platform Trucks, Safety of Industrial Trucks, Pedestrian-Propelled Manual & Se
- EN-ISO-21281 - Construction & Layout of Pedals of Self-Propelled Sit-Down Rider-Controlled Industrial
- EN-ISO-3691-1 - Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
- EN-ISO-3691-2 - Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks
- EN-ISO-3691-3 - Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
- EN-ISO-3691-5 - Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks
- EN-ISO-3691-6 - Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013)
- JIS-D-6011 - Fork Lift Trucks - Stability & Stability Tests
- JIS-D-6021 - Fork lift trucks -- Overhead guards
- JIS-D-6023 - Fork lift trucks -- Brake performance and brake tests
- JIS-D-6026 - Fork-lift trucks -- Fork arms -- Technical characteristics and testing
- SIS-CEN/TR-1459-6 - Rough-terrain trucks - Safety requirements and verification - Part 6: Application of EN ISO 13849-1 to slewing and non-slewing variable-reach rough-terrain truck
- SIS-CEN/TS-1459-8 - Rough-terrain trucks - Safety requirements and verification - Part 8: Variable-reach tractors
- SIS-ISO/TR-29944 - Powered industrial trucks and tractors - Brake performance - Determination of measurement procedures (ISO/TR 29944:2010, IDT)
- SIS-ISO/TS-3691-7 - Industrial trucks - Safety requirements and verification - Part 7: Regional requirements for countries within the European Community
- SIS-ISO/TS-3691-8 - Industrial trucks - Safety requirements and verification - Part 8: Regional requirements for countries outside the European Community
- SS-3437 - Powered industrial trucks - Brake performance - High-lift, low-lift and non-lifting
- SS-3458 - Powered industrial trucks - Safety code
- SS-3459 - Powered industrial trucks - Counter-balanced forklift trucks - Rigid frame and articulated frame types with liftarm systems - Safety code
- SS-3460 - Industrial trucks - Counterbalanced fork lift trucks, rigid frame and articulated frame types with lift arm systems - Rated capacity
- SS-3461 - Industrial trucks - Fork lift trucks - Fork arms for fork lift trucks with a rated capacity above 6300 kg
- SS-3462 - Industrial trucks - Counterbalanced fork lift trucks, articulated frame types with lift arms systems or masts and rigid frame types with lift arm systems - Stability tests
- SS-EN-1175 - Safety of industrial trucks - Electrical/electronic requirements
- SS-EN-1175-1 - Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
- SS-EN-1175-2 - Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
- SS-EN-1175-3 - Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
- SS-EN-12053 - Safety of industrial trucks - Test methods for measuring noise emissions
- SS-EN-12526 - Castors and wheels - Vocabulary, recommended symbols and multilingual dictionary
- SS-EN-12527 - Castors and wheels - Test methods and apparatus
- SS-EN-12528 - Castors and wheels - Castors for furniture - Requirements
- SS-EN-12530 - Castors and wheels - Castors and wheels for manually propelled institutional applications
- SS-EN-12531 - Castors and wheels - Hospital bed castors
- SS-EN-12532 - Castors and wheels - Castors and wheels applications up to 1,1 m/s (4 km/h)
- SS-EN-12533 - Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h)
- SS-EN-12895 - Industrial trucks - Electromagnetic compatibility
- SS-EN-13059 - Safety of industrial trucks - Test methods for measuring vibration
- SS-EN-13490 - Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration
- SS-EN-14354 - Wood-based panels - Wood veneer floor coverings
- SS-EN-1459 - Safety of industrial trucks - Self-propelled variable reach trucks
- SS-EN-1459-1 - Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
- SS-EN-1459-2 - Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
- SS-EN-1459-3 - Rough-terrain trucks - Safety requirements and verification - Part 3: Interface between the variable-reach truck and the work platform
- SS-EN-1459-4 - Rough-terrain trucks - Safety requirements and verification - Part 4: Additional requirements for variable-reach trucks handling freely suspended loads
- SS-EN-1459-5 - Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface
- SS-EN-1459-9 - Rough-terrain trucks - Safety requirements and verification - Part 9: Variable-reach trucks equipped with work platforms having a front guard that can be opened
- SS-EN-1459-AM1 - Safety of industrial trucks - Self-propelled variable reach trucks
- SS-EN-15000 - Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters
- SS-EN-1525 - Safety of industrial trucks - Driverless trucks and their systems
- SS-EN-1526 - Safety of industrial trucks - Additional requirements for automated functions on trucks
- SS-EN-1551 - Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity
- SS-EN-15830 - Rough-terrain variable reach trucks - Visibility - Test methods and verification
- SS-EN-16203 - Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks
- SS-EN-16307-1 - Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
- SS-EN-16307-2 - Industrial trucks - Safety requirements and verification - Part 2: Supplementary requirements for self-propelled variable-reach trucks
- SS-EN-16307-3 - Industrial trucks - Safety requirements and verification - Part 3: Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (additional requirements to EN 16307-1)
- SS-EN-16307-5 - Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
- SS-EN-16307-6 - Industrial trucks - Safety requirements and verification - Part 6: Supplementary requirements for burden and personnel carriers
- SS-EN-16796-1 - Energy efficiency of Industrial trucks - Test methods - Part 1: General
- SS-EN-16796-2 - Energy efficiency of Industrial trucks - Test methods - Part 2: Operator controlled self-propelled trucks, towing tractors and burden-carrier trucks
- SS-EN-16796-3 - Energy efficiency of Industrial trucks - Test methods - Part 3: Container handling lift trucks
- SS-EN-16796-4 - Energy efficiency of Industrial trucks - Test methods - Part 4: Variable-reach rough-terrain trucks
- SS-EN-16796-6 - Energy efficiency of Industrial trucks - Test methods - Part 6: Container straddle carrier
- SS-EN-16842-1 - Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
- SS-EN-16842-10 - Powered industrial trucks - Visibility - Test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier
- SS-EN-16842-2 - Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity
- SS-EN-16842-3 - Powered industrial trucks - Visibility - Test methods and verification - Part 3: Reach trucks up to and including 10 000 kg capacity
- SS-EN-16842-4 - Powered industrial trucks- Visibility - Test methods and verification - Part 4 : Industrial variable reach trucks up to and including 10 000 kg capacity
- SS-EN-16842-5 - Powered industrial trucks - Visibility - Test methods and verification - Part 5: Industrial variable-reach trucks greater than 10 000 kg capacity
- SS-EN-16842-6 - Powered industrial trucks - Visibility - Test methods and verification - Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg capacity
- SS-EN-16842-7 - Powered industrial trucks - Visibility - Test methods and verification - Part 7: Variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length and longer
- SS-EN-16842-8 - Powered industrial trucks - Visibility-Test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10 000 kg capacity
- SS-EN-16842-9 - Powered industrial trucks - Visibility - Test methods and verification - Part 9: Order-picking, lateral- and front-stacking trucks with elevating operator position
- SS-EN-1726-1 - Safety of industrial trucks - Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N - Part 1: General requirements
- SS-EN-1726-1-AM1 - Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N - Part 1: General requirements
- SS-EN-1726-2 - Safety of industrial trucks - Self-propelled trucks up to and including 10 000 kg capacity and tractors with a drawbar pull up to and including 20 000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
- SS-EN-17314 - Industrial trucks - Specifications and test methods - Operator restraint systems other than lap-type seat belts
- SS-EN-1755 - Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
- SS-EN-1757 - Safety of industrial trucks - Pedestrian propelled industrial platform trucks
- SS-EN-1757-1 - Safety of industrial trucks - Pedestrian propelled trucks - Part 1: Stacker trucks
- SS-EN-1757-2 - Safety of industrial trucks - Pedestrian propelled trucks - Part 2: Pallet trucks
- SS-EN-1757-3 - Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks
- SS-EN-1757-4 - Safety of industrial trucks - Pedestrian propelled trucks - Part 4: Scissor lift pallet-trucks
- SS-EN-281 - Self-propelled industrial trucks sit-down rider-controlled - Rules for the construction and layout of pedals
- SS-EN-ISO-10651-4 - Lung ventilators - Part 4: Particular requirements for user-powered resuscitators (ISO 10651-4:2023)
- SS-EN-ISO-18063-2 - Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing rough-terrain variable-reach trucks (ISO 18063-2:2021)
- SS-EN-ISO-21281 - Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks - Rules for the construction and layout of pedals (ISO 21281:2005)
- SS-EN-ISO-21647 - Medical electrical equipment - Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 21647:2004 incl. Cor 1:2005)
- SS-EN-ISO-22418 - Intelligent transport systems - Fast service announcement protocol (FSAP) for general purposes in ITS (ISO 22418:2020)
- SS-EN-ISO-24134 - Industrial trucks - Additional requirements for automated functions on trucks (ISO 24134:2006)
- SS-EN-ISO-3691-1 - Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013)
- SS-EN-ISO-3691-1-AM1 - Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks - Amendment 1 (ISO 3691-1:2011/Amd 1:2020)
- SS-EN-ISO-3691-2 - Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks (ISO 3691-2:2023)
- SS-EN-ISO-3691-3 - Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (ISO 3691-3:2016)
- SS-EN-ISO-3691-3-AM1 - Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads - Amendment 1 (ISO 3691 3:2016/Amd 1:2023)
- SS-EN-ISO-3691-5 - Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)
- SS-EN-ISO-3691-5-AM1 - Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks - Amendment 1 (ISO 3691-5:2014/Amd 1:2020)
- SS-EN-ISO-3691-6 - Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2021)
- SS-ISO-10525 - Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above - Additional stability tests
- SS-ISO-10658 - Industrial trucks operating in special conditionsof stacking with load laterally displaced by powered devices - Additional stability test
- SS-ISO-1084 - Industrial tractors - Definition and nominal rating
- SS-ISO-10896-1 - Rough-terrain trucks - Safety requirements and verification - Part 1: Variable reach-trucks (ISO 10896-1:2012, IDT)
- SS-ISO-10896-2 - Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing trucks (ISO 10896-2:2016, IDT)
- SS-ISO-10896-4 - Rough-terrain trucks - Safety requirements and verification - Part 4: Additional requirements for variable-reach trucks handling freely suspended loads (ISO 10896-4:2015, IDT)
- SS-ISO-10896-5 - Rough-terrain trucks - Safety requirements and verification - Part 5: Interface between rough-terrain truck and integrated personnel work platform (ISO 10896-5:2015, IDT)
- SS-ISO-10896-6 - Rough-terrain trucks - Safety requirements and verification - Part 6: Tilting operator's cabs (ISO 10896-6:2015, IDT)
- SS-ISO-10896-6-AM1 - Rough-terrain trucks - Safety requirements and verification - Part 6: Tilting operator's cabs - Amendment 1 (ISO 10896-6:2015/Amd 1:2019, IDT)
- SS-ISO-11525-4 - Rough-terrain trucks - User requirements - Part 4: Additional requirements for variable-reach trucks handling freely suspended loads (ISO 11525-4:2016, IDT)
- SS-ISO-11525-5 - Rough-terrain trucks - User requirements - Part 5: Interface between rough-terrain truck and integrated personnel work platform (ISO 11525-5:2015, IDT)
- SS-ISO-13284 - Fork-lift trucks - Fork arm extensions and telescopic fork arms - Technical characteristics and strength requirements (ISO 13284:2022, IDT)
- SS-ISO-13562-1 - Industrial variable-reach trucks - Part 1: Stability tests
- SS-ISO-13562-2 - Industrial variable-reach trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m and above
- SS-ISO-13563-1 - Single side loading fork-lift trucks - Part 1: Stability tests
- SS-ISO-13563-2 - Single side loading fork-lift trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above
- SS-ISO-13564-1 - Powered industrial trucks - Test methods for verification of visibility - Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity (ISO 13564-1:2012, IDT)
- SS-ISO-15794 - Bi-directional and multi-directional fork-lift trucks - Stability tests
- SS-ISO-15870 - Powered industrial trucks - Safety signs and hazard pictorials - General principles (ISO 15870:2000, IDT)
- SS-ISO-15871 - Industrial trucks - Specifications for indicator lights for container handling and grappler arm operations (ISO 15871:2019, IDT)
- SS-ISO-18479-1 - Rough-terrain trucks - Non-integrated personnel work platforms - Part 1: Design, safety requirements and verification (ISO 18479-1:2015, IDT)
- SS-ISO-20297-2 - Industrial trucks Lorry-mounted trucks Part 2: Safe use requirements (ISO 20297-2:2023, IDT)
- SS-ISO-20898 - Industrial trucks - Electrical requirement (ISO 20898:2008, IDT)
- SS-ISO-22915-1 - Industrial trucks - Verification of stability - Part 1: General (ISO 22915-1:2008, IDT)
- SS-ISO-22915-10 - Industrial trucks - Verification of stability - Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices (ISO 22915-10:2023, IDT)
- SS-ISO-22915-11 - Industrial trucks - Verification of stability - Part 11: Industrial variable-reach trucks (ISO 22915-11:2011, IDT)
- SS-ISO-22915-12 - Industrial trucks - Verification of stability - Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer (ISO 22915-12:2015, IDT)
- SS-ISO-22915-13 - Industrial trucks - Verification of stability - Part 13: Rough-terrain trucks with mast (ISO 22915-13:2012, IDT)
- SS-ISO-22915-14 - Industrial trucks - Verification of stability - Part 14: Rough-terrain variable-reach trucks (ISO 22915-14:2010, IDT)
- SS-ISO-22915-15 - Industrial trucks - Verification of stability - Part 15: Counterbalanced trucks with articulated steering (ISO 22915-15:2020, IDT)
- SS-ISO-22915-16 - Industrial trucks - Verification of stability - Part 16: Pedestrian-propelled trucks (ISO 22915-16:2014, IDT)
- SS-ISO-22915-17 - Industrial trucks - Verification of stability - Part 17: Towing tractors, burden and personnel carriers (ISO 22915-17:2020, IDT)
- SS-ISO-22915-2 - Industrial trucks - Verification of stability - Part 2: Counterbalanced trucks with mast (ISO 22915-2:2018, IDT)
- SS-ISO-22915-20 - Industrial trucks - Verification of stability - Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization (ISO 22915-20:2023, IDT)
- SS-ISO-22915-21 - Industrial trucks - Verification of stability - Part 21: Order-picking trucks with operator position elevating above 1 200 mm (ISO 22915-21:2019, IDT)
- SS-ISO-22915-22 - Industrial trucks - Verification of stability - Part 22: Lateral- and front-stacking trucks with and without elevating operator position (ISO 22915-22:2014, IDT)
- SS-ISO-22915-24 - Industrial trucks - Verification of stability - Part 24: Slewing variable-reach rough-terrain trucks (ISO 22915-24:2015, IDT)
- SS-ISO-22915-3 - Industrial trucks Verification of stability Part 3: Reach and straddle trucks (ISO 22915-3:2021, IDT)
- SS-ISO-22915-4 - Industrial trucks - Verification of stability - Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height (ISO 22915-4:2018, IDT)
- SS-ISO-22915-4-AM1 - Industrial trucks Verification of stability Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height Amendment 1 (ISO 22915-4:2009/Amd 1:2013, IDT)
- SS-ISO-22915-5 - Industrial trucks - Verification of stability - Part 5: Single-side-loading trucks (ISO 22915-5:2014, IDT)
- SS-ISO-22915-7 - Industrial trucks - Verification of stability - Part 7: Bidirectional and multidirectional trucks (ISO 22915-7:2016, IDT)
- SS-ISO-22915-8 - Industrial trucks - Verification of stability - Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated (ISO 22915-8:2018, IDT)
- SS-ISO-22915-9 - Industrial trucks - Verification of stability - Part 9: Counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer (ISO 22915-9:2014, IDT)
- SS-ISO-2331 - Fork lift trucks - Hook-on type fork arms - Vocabulary
- SS-ISO-23434-1 - Industrial trucks Sustainability Part 1: Vocabulary (ISO 23434-1:2021, IDT)
- SS-ISO-23434-2 - Industrial trucks Sustainability Part 2: Factors and reporting (ISO 23434-2:2021, IDT)
- SS-ISO-24134 - Industrial trucks - Additional requirements for automated functions on trucks (ISO 24134:2006, IDT)
- SS-ISO-24135-1 - Industrial trucks - Specifications and test methods for operator restraint systems - Part 1: Lap-type seat belt (ISO 24135-1:2006, IDT)
- SS-ISO-3184 - Reach and straddle fork-lift trucks - Stability tests
- SS-ISO-3287 - Powered industrial trucks - Symbols for operator controls and other displays
- SS-ISO-3739-3 - Industrial tyres and rims - Part 3: Rims (ISO 3739-3:2008, IDT)
- SS-ISO-5053 - Powered industrial trucks - Terminology (ISO 5053:1987, IDT)
- SS-ISO-5053-1 - Industrial trucks - Vocabulary - Part 1: Types of industrial trucks (ISO 5053-1:2020, IDT)
- SS-ISO-5053-2 - Industrial trucks - Vocabulary - Part 2: Fork arms and attachments (ISO 5053-2:2019, IDT)
- SS-ISO-5057 - Industrial trucks - Inspection and repair of fork arms in service on fork-lift trucks (ISO 5057:2022, IDT)
- SS-ISO-509 - Pallet trucks - Principal dimensions
- SS-ISO-5767-AM1 - Industrial trucks operating in special condition of stacking with mast tilted forward - Additional stability test - Amendment 1
- SS-ISO-6055 - Industrial trucks - Overhead guards - Specification and testing (ISO 6055:2023, IDT)
- SS-ISO-6292 - Powered industrial trucks and tractors - Brake performance and component strength (ISO 6292:2020, IDT)
- SS-ISO-6500 - Powered industrial trucks - Service brakes - Component strength-performance requirements
- SS-ISO-6965 - Aircraft - Self-propelled gantry for lifting air cargo containers and outsize cargoes - Functional requirements
- SS-ISO-8379 - Rough terrain trucks - Stability tests
- SS-ISO-8379-AM1 - Rough terrain trucks - Stability tests - Amendment 1
- SS-ISO/R-1214 - Counterbalanced fork lift trucks - Rated capacity
- SS-ISO/TR-5057 - Industrial trucks - Inspection and repair of forkarms in service on fork lift trucks
- UNE-EN-1459-2 - Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
- UNE-EN-ISO-3691-6 - Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers