Document Center List of Standards on Aerosol Containers
ICS Code 55.130
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D3058 - Simple Can-Puncturing Device, Standard Specification For
- ASTM-D3060 - Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products (Withdrawn 2022)
- ASTM-D3061 - Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans (Withdrawn 2022)
- ASTM-D3063 - Standard Test Method for Pressure in Glass Aerosol Bottles (Withdrawn 2000)
- ASTM-D3064 - Standard Terminology Relating To Aerosol Products (Withdrawn 2022)
- ASTM-D3065 - Standard Test Methods for Flammability of Aerosol Products (Withdrawn 2022)
- ASTM-D3069 - Standard Test Method for Delivery Rate of Aerosol Products (Withdrawn 2022)
- ASTM-D3070 - Standard Practice for Rapid Pressure Determination of Pressurized Products
- ASTM-D3071 - Standard Test Method for Drop Testing of Glass Aerosol Bottles (Withdrawn 2000)
- ASTM-D3073 - Practice for Filling and Inspection of Glass Aerosol Containers (Withdrawn 1997)
- ASTM-D3074 - Standard Test Methods for Pressure in Metal Aerosol Containers (Withdrawn 2000)
- ASTM-D3075 - Standard Test Method for Overrun of Food Aerosol Products (Withdrawn 2001)
- ASTM-D3076 - Standard Practice for Effective Crimping on Outside Crimped Valves of Aerosol Containers
- ASTM-D3089 - Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
- ASTM-D3090 - Standard Practice for Storage Testing of Aerosol Products
- ASTM-D3091 - Standard Practice for Safe Filling of Low-Pressure Pressurized Products
- ASTM-D3094 - Standard Practice for Seepage Rate of Aerosol Products
- ASTM-D3097 - Standard Test Method for Aerosol Products for Delivered Mass (Withdrawn 2003)
- ASTM-D3789 - Practice for Labeling Cans of Consumer Spray Paint (Withdrawn 1997)
- ASTM-D3890 - Standard Practice for Number of Strokes to Prime a Mechanical Pump Dispenser
- ASTM-D4041 - Standard Practice for Determining Spray Patterns of Mechanical Pump Dispensers
- ASTM-D4333 - Standard Practice for Compatibility of Mechanical Pump Dispenser Components
- ASTM-D4336 - Standard Practice for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
- ASTM-D4353 - Test Method for Basic Stability of a mechanical Pump Dispenser and Product (Withdrawn 1995)
- ASTM-D6534 - Standard Practice for Determining the Peak Force-to-Actuate of a Mechanical Pump Dispenser
- ASTM-D6535 - Standard Practice for Determining the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM-D6536 - Standard Practice for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM-D6633 - Standard Practice for Basic Functional Stability of a Mechanical Pump Dispenser
- ASTM-D6654 - Standard Practice for Basic Storage Stability of a Mechanical Pump Dispenser
- ASTM-D6655 - Standard Terminology Relating to Mechanical Pump Dispensers (Withdrawn 2016)
- ASTM-D7952 - Standard Test Method for Measuring Aspiration Potential of Aerosol Products
- ASTM-E1260 - Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
- ASTM-E2872 - Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus
BSI:
- BS-3130-4 - Glossary of packaging terms
- BS-4172-1 - Hand-held pressurized aerosol dispensers against houseflies. Specification for insecticidal performance
- BS-4172-2 - Hand-held pressurized aerosol dispensers against houseflies. Method for determination of insecticidal performance
- BS-5329 - Specification for non-refillable metallic containers up to 1.4 litres capacity filled with liquefied petroleum gases
- BS-5597 - Specification for non-refillable plastics aerosol dispensers up to 1000 mL capacity
- BS-7289 - Specification for dimensions of three-piece tinplate aerosol cans
- BS-EN-14847 - Aerosol containers. Tinplate containers. Dimensions of the 25,4 mm (one inch) aperture
- BS-EN-14848 - Aerosol containers. Metal containers with 25,4 mm aperture. Dimensions of valve cups
- BS-EN-14849 - Aerosol containers. Glass containers. Dimensions of aerosol valve ferrules
- BS-EN-14850 - Aerosol containers. Metal containers with 25,4 mm aperture. Measurement of contact height
- BS-EN-14851 - Aerosol containers. Aerosol foam flammability test
- BS-EN-14852 - Aerosol containers. Determination of the ignition distance of the spray jet
- BS-EN-14853 - Aerosol containers. Enclosed space ignition test
- BS-EN-14854 - Glass packaging. Dimensions of neck finishes for aerosol and spray glass containers
- BS-EN-15006 - Metal aerosol containers. Aluminium containers. Dimensions of the 25,4 mm aperture
- BS-EN-15007 - Aerosol containers. Tinplate containers. Dimensions of two and three-piece cans
- BS-EN-15007-TC - Tracked Changes. Aerosol containers. Tinplate containers. Dimensions of two and three-piece cans
- BS-EN-15008 - Aerosol containers. Aluminium containers. Dimensions of one-piece cans with 25,4 mm aperture
- BS-EN-15008-TC - Tracked Changes. Aerosol containers. Aluminium containers. Dimensions of one-piece cans with 25,4 mm aperture
- BS-EN-15009 - Aerosol containers. Compartmented aerosol dispensers
- BS-EN-15010 - Aerosol containers. Aluminium containers. Tolerances of the fundamental dimensions in connection with the clinch
- BS-EN-ISO-90-3 - Light gauge metal containers. Definitions and determination of dimensions and capacities
ISO:
- ISO-10154 - Light gauge metal containers -- Three-piece necked-in tinplate aerosol cans -- Dimensions of the top end
- ISO-90-3 - Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 3: Aerosol cans
Other SDOs:
- DIN-EN-14847 - Aerosol Containers - Tinplate Containers - Dimensions of the 25,4 mm Aperture
- DIN-EN-14848 - Aerosol Containers - Metal Containers With 25,4 mm Aperture - Dimensions of Valve Cup
- DIN-EN-14849 - Aerosol Containers - Glass Containers - Dimensions of Aerosol Valve Ferrules
- DIN-EN-14850 - Aerosol Containers - Metal Containers With 25,4 mm Aperture - Measurement of Contact
- DIN-EN-14851 - Aerosol Containers - Aerosol Foam Flammability Test
- DIN-EN-14852 - Aerosol Containers - Determination of the Ignition Distance of the Spray Jet
- DIN-EN-14853 - Aerosol - Containers - Enclosed Space Ignition Test
- DIN-EN-14854 - Aerosol Containers - Glass Containers - Dimensions of the Neck Finish
- DIN-EN-15006 - Metal Aerosol Containers - Aluminium Containers - Dimensions of the 25,4 mm Aperture
- DIN-EN-15007 - Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans; German version EN 15007:2017
- DIN-EN-15008 - Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture; German version EN 15008:2017
- DIN-EN-15009 - Aerosol Containers - Compartmented Aerosol Containers
- DIN-EN-15010 - Aerosol Containers - Aluminium Containers - Tolerances of the Fundamental Dimensions I
- EN-14847 - Aerosol Containers - Tinplate Containers - Dimensions of the 25,4 mm Aperture
- EN-14848 - Aerosol Containers - Metal Containers With 25,4 mm Aperture - Dimensions of Valve Cup
- EN-14849 - Aerosol Containers - Glass Containers - Dimensions of Aerosol Valve Ferrules
- EN-14850 - Aerosol Containers - Metal Containers With 25,4 mm Aperture - Measurement of Contact
- EN-14851 - Aerosol Containers - Aerosol Foam Flammability Test
- EN-14852 - Aerosol Containers - Determination of the Ignition Distance of the Spray Jet
- EN-14853 - Aerosol Containers - Enclosed Space Ignition Test
- EN-14854 - Aerosol Containers - Glass Containers - Dimensions of the Neck Finish
- EN-15006 - Metal Aerosol Containers - Aluminium Containers - Dimensions of the 25,4 mm Aperture
- EN-15007 - Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
- EN-15008 - Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
- EN-15009 - Aerosol Containers, Compartmented Aerosol Containers
- EN-15010 - Aerosol Containers, Aluminium Containers, Tolerances of the Fundamental Dimensions In
- EN-ISO-90-3 - Part 3: Aerosol Cans, Light Gauge Metal Containers - Definitions & Determination of Di
- SS-EN-14847 - Aerosol containers - Tinplate containers - Dimensions of the 25,4 mm aperture
- SS-EN-14848 - Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups
- SS-EN-14849 - Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules
- SS-EN-14850 - Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height
- SS-EN-14851 - Aerosol containers - Aerosol foam flammability test
- SS-EN-14852 - Aerosol containers - Determination of the ignition distance of the spray jet
- SS-EN-14853 - Aerosol containers - Enclosed space ignition test
- SS-EN-14854 - Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers
- SS-EN-15006 - Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
- SS-EN-15007 - Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
- SS-EN-15008 - Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
- SS-EN-15009 - Aerosol containers - Compartmented aerosol dispensers
- SS-EN-15010 - Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch