Document Center List of Standards on Iron And Steel Castings
ICS Code 77.140.80
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1001 - Standard Specification for High-Strength Steel Castings in Heavy Sections
- ASTM-A1062 - Standard Specification for Steel Castings Sampling
- ASTM-A1067 - Standard Specification for Test Coupons for Steel Castings
- ASTM-A1091 - Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
- ASTM-A128 - Standard Specification for Steel Castings, Austenitic Manganese
- ASTM-A148 - Standard Specification for Steel Castings, High Strength, for Structural Purposes
- ASTM-A159 - Standard Specification for Automotive Gray Iron Castings
- ASTM-A197M - Specification for Cupola Malleable Iron [Metric] (Withdrawn 1999)
- ASTM-A216 - Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
- ASTM-A217 - Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
- ASTM-A220 - Standard Specification for Pearlitic Malleable Iron
- ASTM-A220M - Specification for Pearlitic Malleable Iron [Metric] (Withdrawn 1999)
- ASTM-A247 - Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
- ASTM-A27 - Standard Specification for Steel Castings, Carbon, for General Application
- ASTM-A278 - Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
- ASTM-A297 - Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
- ASTM-A319 - Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
- ASTM-A327 - Standard Test Methods for Impact Testing of Cast Irons
- ASTM-A351 - Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
- ASTM-A352 - Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
- ASTM-A356 - Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
- ASTM-A367 - Standard Test Methods of Chill Testing of Cast Iron
- ASTM-A389 - Standard Specification for Steel Castings, Alloy, Specially Heat Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
- ASTM-A395 - Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
- ASTM-A395M - Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures [Metric] (Withdrawn 1998)
- ASTM-A426 - Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
- ASTM-A436 - Standard Specification for Austenitic Gray Iron Castings
- ASTM-A438 - Standard Test Method for Transverse Testing of Gray Cast Iron (Withdrawn 2003)
- ASTM-A439 - Standard Specification for Austenitic Ductile Iron Castings
- ASTM-A447 - Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
- ASTM-A451 - Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
- ASTM-A47 - Standard Specification for Ferritic Malleable Iron Castings
- ASTM-A476 - Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
- ASTM-A476M - Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls [Metric] (Withdrawn 2000)
- ASTM-A47M - Standard Specification for Ferritic Malleable Iron Castings (Metric)
- ASTM-A48 - Standard Specification for Gray Iron Castings
- ASTM-A487 - Standard Specification for Steel Castings Suitable for Pressure Service
- ASTM-A518 - Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
- ASTM-A518M - Standard Specification for Corrosion-Resistant High-Silicon Iron Castings [Metric] (Withdrawn 1999)
- ASTM-A532 - Standard Specification for Abrasion-Resistant Cast Irons
- ASTM-A536 - Standard Specification for Ductile Iron Castings
- ASTM-A571 - Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
- ASTM-A571M - Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service [Metric] (Withdrawn 2001)
- ASTM-A597 - Standard Specification for Cast Tool Steel
- ASTM-A602 - Standard Specification for Automotive Malleable Iron Castings
- ASTM-A609 - Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
- ASTM-A644 - Standard Terminology Relating to Iron Castings
- ASTM-A667 - Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
- ASTM-A667M - Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders (Metric) (Withdrawn 1987)
- ASTM-A703 - Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
- ASTM-A732 - Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
- ASTM-A743 - Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
- ASTM-A744 - Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
- ASTM-A747 - Standard Specification for Steel Castings, Stainless, Precipitation Hardening
- ASTM-A748 - Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
- ASTM-A757 - Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
- ASTM-A781 - Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
- ASTM-A799 - Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
- ASTM-A800 - Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
- ASTM-A802 - Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
- ASTM-A823 - Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
- ASTM-A834 - Standard Specification for Common Requirements for Iron Castings for General Industrial Use
- ASTM-A842 - Standard Specification for Compacted Graphite Iron Castings
- ASTM-A874 - Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
- ASTM-A874M - Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service [Metric] (Withdrawn 1999)
- ASTM-A890 - Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
- ASTM-A897 - Standard Specification for Austempered Ductile Iron Castings
- ASTM-A897M - Standard Specification for Austempered Ductile Iron Castings [Metric] (Withdrawn 2001)
- ASTM-A903 - Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
- ASTM-A995 - Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
- ASTM-B320 - Standard Practice for Preparation of Iron Castings for Electroplating
- ASTM-B883 - Standard Specification for Metal Injection Molded (MIM) Materials
- ASTM-C660 - Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
- ASTM-C847 - Standard Specification for Metal Lath
- ASTM-E1030 - Standard Practice for Radiographic Examination of Metallic Castings
- ASTM-E125 - Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
- ASTM-E186 - Standard Reference Radiographs for Heavy-Walled (2 to 4
in. (50.8 to 114 mm)) Steel Castings1 2 - ASTM-E280 - Standard Reference Radiographs for Heavy-Walled (4
to 12 in. (114 to 305 mm)) Steel Castings1 2 - ASTM-E2868 - Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness
- ASTM-E322 - Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry (Withdrawn 2021)
- ASTM-E446 - Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
- ASTM-E802 - Standard Reference Radiographs for Gray Iron Castings Up to 4
in. (114 mm) in Thickness1 2 - ASTM-E903 - Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
BSI:
- BS-1591 - Specification for corrosion resisting high silicon iron castings
- BS-2772-3 - Colliery haulage and winding equipment
- BS-3100 - Specification for steel castings for general engineering purposes
- BS-3146-1 - Specification for investment castings in metal
- BS-3146-2 - Specification for investment castings in metal
- BS-4080 - Methods for non-destructive testing of steel castings
- BS-4080-1 - Specification for severity levels for discontinuities in steel castings. Surface discontinuities revealed by magnetic particle flaw detection
- BS-4080-2 - Specification for severity levels for discontinuities in steel castings. Surface discontinuities revealed by penetrant flaw detection
- BS-5998 - Specification for quality levels for steel valve castings
- BS-6208 - Method for ultrasonic testing of ferritic steel castings including quality levels
- BS-6615 - Specification for dimensional tolerances for metal and metal alloy castings
- BS-EN-10283 - Corrosion resistant steel castings
- BS-EN-10293 - Steel castings. Steel castings for general engineering uses
- BS-EN-10295 - Heat resistant steel castings
- BS-EN-10340 - Steel castings for structural uses
- BS-EN-10349 - Steel castings. Austenitic manganese steel castings
- BS-EN-12454 - Founding. Visual examination of surface discontinuities. Steel sand castings
- BS-EN-12680-1 - Founding. Ultrasonic examination
- BS-EN-12680-2 - Founding. Ultrasonic examination
- BS-EN-12680-3 - Founding. Ultrasonic testing
- BS-EN-1370 - Founding. Examination of surface condition
- BS-EN-1371-1 - Founding. Liquid penetrant testing
- BS-EN-1371-2 - Founding. Liquid penetrant testing
- BS-EN-1559-2 - Founding. Technical conditions of delivery
- BS-EN-1559-3 - Founding. Technical conditions of delivery
- BS-EN-1562 - Founding. Malleable cast irons
- BS-EN-ISO-11970 - Specification and qualification of welding procedures for production welding of steel castings
- BS-EN-ISO-13520 - Determination of ferrite content in austenitic stainless steel castings
- BS-EN-ISO-13520-TC - Tracked Changes. Determination of ferrite content in austenitic stainless steel castings
- BS-EN-ISO-8062-1 - Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts
- BS-EN-ISO-8062-3 - Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts
- BS-EN-ISO-945-1 - Microstructure of cast irons
- BS-HC-102 - Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (1250 N/mm2) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5)
- BS-HC-402 - Specification for cast iron ring pots (centrifugally cast) (suitable for piston rings up to 200 mm in diameter)
- BS-ISO-10679 - Steels. Cast tool steels
- BS-ISO-11971 - Steel and iron castings. Visual testing of surface quality
- BS-ISO-11972 - Corrosion-resistant cast steels for general applications
- BS-ISO-11973 - Heat-resistant cast steels and alloys for general applications
- BS-ISO-11973-TC - Tracked Changes. Heat-resistant cast steels and alloys for general applications.
- BS-ISO-13520 - Determination of ferrite content in austenitic stainless steel castings
- BS-ISO-13521 - Austenitic manganese steel castings
- BS-ISO-13521-TC - Tracked Changes. Austenitic manganese steel castings
- BS-ISO-13583-1 - Centrifugally cast steel and alloy products
- BS-ISO-13583-1-TC - Tracked Changes. Centrifugally cast steel and alloy products
- BS-ISO-13583-2 - Centrifugally cast steel and alloy products
- BS-ISO-13583-2-TC - Tracked Changes. Centrifugally cast steel and alloy products
- BS-ISO-14737 - Carbon and low alloy cast steels for general applications
- BS-ISO-14737-TC - Tracked Changes. Carbon and low alloy cast steels for general applications
- BS-ISO-16468 - Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements
- BS-ISO-19959 - Steels, nickel alloys and cobalt alloys investment castings. Visual testing of surface quality
- BS-ISO-19959-TC - Tracked Changes. Steels, nickel alloys and cobalt alloys investment castings. Visual testing of surface quality
- BS-ISO-19960 - Cast steels and alloys with special physical properties
- BS-ISO-19960-TC - Tracked Changes. Cast steels and alloys with special physical properties
- BS-ISO-4986 - Steel and iron castings. Magnetic particle testing
- BS-ISO-4987 - Steel and iron castings. Liquid penetrant testing
- BS-ISO-4990 - Steel castings. General technical delivery requirements
- BS-ISO-4990-TC - Tracked Changes. Steel castings. General technical delivery requirements.
- BS-ISO-4991 - Steel castings for pressure purposes
- BS-ISO-4992-1 - Steel castings. Ultrasonic testing
- BS-ISO-4992-2 - Steel castings. Ultrasonic testing
- BS-ISO-4993 - Steel and iron castings. Radiographic testing
- BS-ISO-9477 - High-strength cast steels for general engineering and structural purposes
- BS-ISO-9477-TC - Tracked Changes. High-strength cast steels for general engineering and structural purposes
ISO:
- ISO-10679 - Steels - Cast tool steels
- ISO-11970 - Specification and qualification of welding procedures for production welding of steel castings
- ISO-11971 - Steel and iron castings - Visual testing of surface quality
- ISO-11972 - Corrosion-resistant cast steels for general applications
- ISO-11973 - Heat-resistant cast steels and alloys for general applications
- ISO-13520 - Determination of ferrite content in austenitic stainless steel castings
- ISO-13521 - Austenitic manganese steel castings
- ISO-13583-1 - Centrifugally cast steel and alloy products - Part 1: General testing and tolerances
- ISO-13583-2 - Centrifugally cast steel and alloy products - Part 2: Heat-resistant materials
- ISO-14737 - Carbon and low alloy cast steels for general applications
- ISO-16468 - Investment castings (steel, nickel alloys and cobalt alloys) - General technical requirements
- ISO-19959 - Steels, nickel alloys and cobalt alloys investment castings - Visual testing of surface quality
- ISO-19960 - Cast steels and alloys with special physical properties
- ISO-3755 - Cast carbon steels for general engineering purposes
- ISO-4986 - Steel and iron castings - Magnetic particle testing
- ISO-4987 - Steel castings - Liquid penetrant testing
- ISO-4990 - Steel castings - General technical delivery requirements
- ISO-4991 - Steel castings for pressure purposes
- ISO-4992-1 - Steel castings - Ultrasonic testing - Part 1: Steel castings for general purposes
- ISO-4992-2 - Steel castings - Ultrasonic testing - Part 2: Steel castings for highly stressed components
- ISO-4993 - Steel and iron castings - Radiographic testing
- ISO-7186 - Ductile iron products for sewerage applications
- ISO-9477 - High-strength cast steels for general engineering and structural purposes
Other SDOs:
- DIN-EN-10293 - Steel castings - Steel castings for general engineering uses; German version EN 10293:2015
- EN-10283 - Corrosion Resistant Steel Castings
- EN-10293 - Steel castings - Steel castings for general engineering uses
- EN-10340 - Steel Castings for Structural Uses
- EN-10349 - Steel Castings - Austenitic Manganese Steel Castings
- EN-1371-1 - Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings
- EN-1371-2 - Founding - Liquid penetrant testing - Part 2: Investment castings
- EN-1559-2 - Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
- EN-1559-3 - Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
- EN-ISO-11970 - Specification and qualification of welding procedures for production welding of steel castings
- EN-ISO-13520 - Determination of ferrite content in austenitic stainless steel castings (ISO 13520:2015)
- EN-ISO-8062-1 - Geometrical Product Specifications (Gps), Dimensional & Geometrical Tolerances for Mou
- EN-ISO-8062-3 - Geometrical Product Specifications (Gps), Dimensional & Geometrical Tolerances for Mou
- EN-ISO-945-1 - Part 1: Graphite Classification by Visual Analysis, Microstructure of Cast Irons
- JIS-B-2051 - Malleable iron and ductile iron valves
- JIS-G-0307 - Steel castings -- General technical delivery requirements
- JIS-G-5510 - Austenitic iron castings
- SIS-ISO/TR-16078 - Cast Irons - Classification and designation of casting imperfections (ISO/TR 16078:2013, IDT)
- SS-111185 - Founding Spheroidal graphite cast irons Test sample for determination of nodularity
- SS-114060 - Founding - Spheroidal graphite cast iron - Defect classification
- SS-219335 - Steel - Semi-finished products for closed die-forgings - Technical delivery requirements
- SS-EN-10079 - Definition of steel products
- SS-EN-10213 - Steel castings for pressure purposes
- SS-EN-10228-4 - Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
- SS-EN-10243-1 - Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings
- SS-EN-10243-2 - Steel die forgings - Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines
- SS-EN-10250-1 - Open die steel forgings for general engineering purposes - Part 1: General requirements
- SS-EN-10250-2 - Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
- SS-EN-10250-3 - Open die steel forgings for general engineering purposes - Part 3: Alloy special steels
- SS-EN-10254 - Steel closed die forgings - General technical delivery conditions
- SS-EN-10283 - Corrosion resistant steel castings
- SS-EN-10293 - Steel castings - Steel castings for general engineering uses
- SS-EN-10295 - Heat resistant steel castings
- SS-EN-10340 - Steel castings for structural uses
- SS-EN-12390-3 - Testing hardened concrete - Part 3: Compressive strength of test specimens
- SS-EN-12454 - Founding - Visual examination of surface discontinuities - Steel sand castings
- SS-EN-13445 - Unfired pressure vessels
- SS-EN-1370 - Founding - Examination of surface condition
- SS-EN-1371-1 - Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings
- SS-EN-1371-2 - Founding - Liquid penetrant testing - Part 2: Investment castings
- SS-EN-1559-1 - Founding - Technical conditions of delivery - Part 1: General
- SS-EN-1559-2 - Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
- SS-EN-1559-3 - Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
- SS-EN-1563 - Founding - Spheroidal graphite cast irons
- SS-EN-2103-1 - Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Part 1: General requirements
- SS-EN-2103-2 - Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Part 2: Remelting stock
- SS-EN-2103-3 - Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Part 3: Pre-production and production castings
- SS-EN-2157-1 - Aerospace series - Steel - Forging stock and forgings - Technical specifications - Part 1: General requiremnts
- SS-EN-2157-2 - Aerospace series - Steel - Forging stock and forgings - Technical specification - Part 2: Forging stock
- SS-EN-2157-3 - Aerospace series - Steel - Forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings
- SS-EN-2858-1 - Aerospace series - Titanium and titanium alloys -Forging stock and forgings - Technical specification - Part 1: General requirements
- SS-EN-2858-2 - Aerospace series - Titanium and titanium alloys -Forging stock and forgings - Technical specification - Part 2: Forging stock
- SS-EN-2858-3 - Aerospace series - Titanium and titanium alloys -Forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings
- SS-EN-622-2 - Fibreboards - Specifications - Part 2: Requirements for hardboards
- SS-EN-ISO-10135 - Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
- SS-EN-ISO-11970 - Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016)
- SS-EN-ISO-13520 - Determination of ferrite content in austenitic stainless steel castings (ISO 13520:2023)
- SS-EN-ISO-9222-1 - Technical drawings - Seals for dynamic application - Part 1: General simplified representation (ISO 9222-1:1989)
- SS-ISO-10135 - Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007, IDT)
- SS-ISO-10679 - Steel - Cast tool steel (ISO 10679:2010, IDT)
- SS-ISO-13715 - Technical product documentation - Edges of undefined shape - Indication and dimensioning (ISO 13715:2017, IDT)