Document Center List of Standards on Cardboard Paper For Packaging, See 55.040
ICS Code 85.080.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BS-11130 - Cardboard baby boxes for domestic use. Safety requirements and test methods
- BS-EN-ISO-3037-TC - Tracked Changes. Corrugated fibreboard. Determination of edgewise crush resistance (non-waxed edge method)
- BS-EN-ISO-7263-1 - Corrugating medium. Determination of the flat crush resistance after laboratory fluting
- BS-ISO-11093-4 - Paper and board. Testing of cores
- BS-ISO-11093-5 - Paper and board. Testing of cores
- BS-ISO-11093-7 - Paper and board. Testing of cores
- BS-ISO-11093-8 - Paper and board. Testing of cores
ISO:
- ISO-3034 - Corrugated fibreboard - Determination of single sheet thickness
- ISO-3035 - Corrugated fibreboard - Determination of flat crush resistance
- ISO-3037 - Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge method)
- ISO-3038 - Corrugated fibreboard -- Determination of the water resistance of the glue bond by immersion
- ISO-3039 - Corrugated fibreboard - Determination of grammage of the component papers after separation
- ISO-7263 - Corrugating medium - Determination of the flat crush resistance after laboratory fluting
- ISO-7263-1 - Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 1: A-flute
- ISO-7263-2 - Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 2: B-flute
Other SDOs:
- DIN-ISO-11093-6 - Part 6: Determination of Bending Strength by the Three-Point Method, Paper & Board, Te
- DIN-ISO-11093-9 - Part 9: Determination of Flat Crush Resistance, Paper & Board - Testing of Cores
- DIN-ISO-13542 - Paper & Board - Specification for Internal Diameters of Cores for Reels
- EN-ISO-3037 - Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013)
- EN-ISO-7263-1 - Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 1: A-flute (ISO 7263-1:2018)
- SIS-ISO-23885 - Paper, board and graphic technology Determination of the coating strength in the inner fold (ISO/TS 23885:2022, IDT)
- SIS-ISO/TS-19857 - Paper, Board and Printing inks - Printability - Laboratory test method for offset ink setting (ISO/TS 19857:2021)
- SS-EN-ISO-3035 - Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
- SS-EN-ISO-3037 - Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge method) (ISO 3037:2022)
- SS-EN-ISO-536 - Paper and board - Determination of grammage (ISO 536:2019)
- SS-EN-ISO-7263 - Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011)
- SS-EN-ISO-7263-1 - Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 1: A-flute (ISO 7263-1:2018)
- SS-EN-ISO-7263-2 - Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 2: B-flute (ISO 7263-2:2018)
- SS-ISO-11093-4 - Paper and board - Testing of cores - Part 4: Measurement of dimensions (ISO 11093-4:2022, IDT)
- SS-ISO-11093-5 - Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation (ISO 11093-5:2016, IDT)
- SS-ISO-11093-8 - Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis (ISO 11093-8:2017, IDT)
- SS-ISO-11480 - Pulp, paper and board - Determination of total chlorine and organically bound chlorine (ISO 11480:2017, IDT)
- SS-ISO-12192 - Paper and board - Determination of compressive strength - Ring crush method (ISO 12192:2011, IDT)
- SS-ISO-2493-2 - Paper and board - Determination of resistance to bending - Part 2: Taber-type tester (ISO 2493-2:2020, IDT)
- SS-ISO-3034 - Corrugated fibreboard - Determination of single sheet thickness (ISO 3034:2011, IDT)
- SS-ISO-3036 - Board - Determination of puncture resistance (ISO 3036:1975, IDT)
- SS-ISO-3039 - Corrugated fibreboard - Determination of grammage of the component papers after separation (ISO 3039:2010, IDT)
- SS-ISO-3689 - Paper and board - Determination of bursting strength after immersion in water (ISO 3689:1983, IDT)
- SS-ISO-4046-1 - Paper, board, pulps and related terms - Vocabulary - Part 1: Alphabetical index (ISO 4046-1:2016, IDT)
- SS-ISO-4046-5 - Paper, board, pulps and related terms - Vocabulary - Part 5: Properties of pulp, paper and board (ISO 4046-5:2016, IDT)
- SS-ISO-4094 - Paper, board and pulps - General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3 (ISO 4094:2017, IDT)
- SS-ISO-5629 - Paper and board - Determination of bending stiffness - Resonance method (ISO 5629:2017, IDT)
- SS-ISO-5630-1 - Paper and board - Accelerated ageing - Part 1: Dry heat treatment at 105 degrees C (ISO 5630-1:1991, IDT)
- SS-ISO-5630-3 - Paper and board - Accelerated ageing - Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity (ISO 5630-3:1996, IDT)
- SS-ISO-5630-4 - Paper and board - Accelerated ageing - Part 4: Dry heat treatment at 120 or 150 degrees C (ISO 5630-4:1986, IDT)
- SS-ISO-5633 - Paper and board - Determination of resistance to water penetration (ISO 5633:1983, IDT)
- SS-ISO-5637 - Paper and board - Determination of water absorption after immersion in water (ISO 5637:1989, IDT)
- SS-ISO-8226-2 - Paper and board - Measurement of hygroexpansivity - Part 2: Hygroexpansivity up to a maximum relative humidity of 86 % (ISO 8226-2:1990, IDT)
- SS-ISO-8787 - Paper and board - Determination of capilarry rise - Klemm method (ISO 8787:1986, IDT)
- SS-ISO-8791-1 - Paper and board - Determination of roughness/smoothness (air leak methods) - Part 1: General method (ISO 8791-1:1986, IDT)
- SS-ISO-8791-3 - Paper and board - Determination of roughness/smoothness (air leak methods) - Part 3: Sheffield method (ISO 8791-3:2017, IDT)
- SS-ISO-9197 - Paper, board and pulps - Determination of water-soluble chlorides (ISO 9197:2016, IDT)
- SS-ISO-9932 - Paper and board Determination of water vapour transmission rate of sheet materials Dynamic sweep and static gas methods (ISO 9932:2021, IDT)
- UNE-ISO-3034 - Corrugated fibreboard. Determination of single sheet thickness