ASTM-B757 › Historical Revision Information
Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
The following bibliographic material is provided to assist you with your purchasing decision:
This specification covers annealed UNS N06110 alloy welded pipes for general corrosion applications. Each pipe should be made from the flat-rolled alloy by an automatic welding process without any filler metal additions. Either only the weld metal or both weld and base metals should be cold worked after welding and prior to final annealing. The piped should also be furnished and the oxide removed. Descaling is not necessary when bright annealing is used.
Scope
1.1 This specification covers welded UNS N06110 pipe in the annealed condition (temper) for general corrosion applications.
1.2 This specification covers pipe sizes in schedules shown in Table 1.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 The following precautionary caveat pertains only to the test method portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
TABLE 1 Dimensions of Welded PipeA
Note 1—The following table is a partial reprint of Table 1 of the American National Standard for Stainless Steel Pipe (ANSI B36.19).
Note 2—The decimal thicknesses for the respective pipe sizes represent their nominal wall dimensions.
| Nominal Pipe Size in. | Outside Diameter in. (mm) | Nominal Wall Thickness, in. (mm) | |||
|---|---|---|---|---|---|
| Schedule 5SA | Schedule 10S | Schedule 40S | |||
| 1/8 | 0.405 (10.29) | ... | 0.049 (1.25) | 0.068 (1.73) | |
| 1/4 | 0.540 (13.72) | ... | 0.065 (1.65) | 0.088 (2.24) | |
| 3/8 | 0.675 (17.15) | ... | 0.065 (1.65) | 0.091 (2.31) | |
| 1/2 | 0.840 (21.34) | 0.065 (1.65) | 0.083 (2.11) | 0.109 (2.77) | |
| 3/4 | 1.050 (26.67) | 0.065 (1.65) | 0.083 (2.11) | 0.113 (2.87) | |
| 1 | 1.315 (33.40) | 0.065 (1.65) | 0.109 (2.77) | 0.133 (3.38) | |
| 11/4 | 1.660 (42.16) | 0.065 (1.65) | 0.109 (2.77) | 0.140 (3.56) | |
| 11/2 | 1.900 (48.26) | 0.065 (1.65) | 0.109 (2.77) | 0.145 (3.68) | |
| 2 | 2.375 (60.33) | 0.065 (1.65) | 0.109 (2.77) | 0.154 (3.91) | |
| 21/2 | 2.875 (73.03) | 0.083 (2.11) | 0.120 (3.05) | ... | |
| 3 | 3.500 (88.90) | 0.083 (2.11) | 0.120 (3.05) | ... | |
| 31/2 | 4.000 (101.6) | 0.083 (2.11) | 0.120 (3.05) | ... | |
| 4 | 4,500 (114.3) | 0.083 (2.11) | 0.120 (3.05) | 0.237 (6.02) | |
| 5 | 5.563 (141.3) | 0.109 (2.77) | 0.134 (3.40) | ... | |
| 6 | 6.625 (168.3) | 0.109 (2.77) | 0.134 (3.40) | ... | |
A Schedules 5S and 10S wall thicknesses do not permit threading in accordance with the American National Standard for Pipe Threads (ANSI B2.1).
Keywords
Nickel alloy pipe--specifications; Nickel-chromium alloys--specifications; Nickel-chromium-molybdenum-tungsten alloys; UNS N06110 (austenitic corrosion resistant Ni alloy, Allcorr); Welded Ni/Ni alloy pipe--specifications; ICS Number Code 77.150.40 (Nickel and chromium products)
To find similar documents by ASTM Volume:
To find similar documents by classification:
77.150.40 (Nickel and chromium products)
This document comes with our free Notification Service, good for the life of the document.
This document is available in either Paper or PDF format.
Document Number
ASTM-B757-00(2011)
Revision Level
2000 R11 EDITION
Status
Superseded
Modification Type
Reapproval
Publication Date
Oct. 31, 2011
Document Type
Specification
Page Count
5 pages
Committee Number
B02.07