15.02: Glass; Ceramic Whitewares
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-C1023 - Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
- ASTM-C1026 - Standard Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling
- ASTM-C1027 - Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
- ASTM-C1028 - Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method (Withdrawn 2014)
- ASTM-C1034 - Standard Test Method for Lead and Cadmium Extracted From Glazed Ceramic Cookware (Withdrawn 2001)
- ASTM-C1035 - Standard Specification for Lead and Cadmium Extracted from Glazed Ceramic Cookware (Withdrawn 2001)
- ASTM-C1036 - Standard Specification for Flat Glass
- ASTM-C1048 - Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass
- ASTM-C1053 - Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications (Withdrawn 2019)
- ASTM-C1069 - Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
- ASTM-C1172 - Standard Specification for Laminated Architectural Flat Glass
- ASTM-C1182 - Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
- ASTM-C1191 - Standard Practice for Safe Use and Handling of Ceramic Clays and Slips (Withdrawn 1999)
- ASTM-C1192 - Standard Practice for Safe Spraying of Ceramic Glazes (Withdrawn 1999)
- ASTM-C1203 - Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
- ASTM-C1243 - Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
- ASTM-C1256 - Standard Practice for Interpreting Glass Fracture Surface Features
- ASTM-C1279 - Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
- ASTM-C1300 - Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
- ASTM-C1349 - Standard Specification for Architectural Flat Glass Clad Polycarbonate
- ASTM-C1350M - Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa·s to Approximately 1013 Pa·s) by Beam Bending (Metric)
- ASTM-C1351M - Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa·s and 108 Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]
- ASTM-C1376 - Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
- ASTM-C1377 - Standard Test Method for Calibration of Surface/Stress Measuring Devices (Withdrawn 2014)
- ASTM-C1378 - Standard Test Method for Determination of Resistance to Staining
- ASTM-C1422 - Standard Specification for Chemically Strengthened Flat Glass
- ASTM-C1426 - Standard Practices for Verification and Calibration of Polarimeters
- ASTM-C1443 - Standard Specification for Glasses, Portlight, Circular, Fully Tempered (Withdrawn 2021)
- ASTM-C146 - Standard Test Methods for Chemical Analysis of Glass Sand
- ASTM-C1464 - Standard Specification for Bent Glass
- ASTM-C1466 - Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
- ASTM-C147 - Standard Test Methods for Internal Pressure Strength of Glass Containers
- ASTM-C148 - Standard Test Methods for Polariscopic Examination of Glass Containers
- ASTM-C149 - Standard Test Method for Thermal Shock Resistance of Glass Containers
- ASTM-C1503 - Standard Specification for Silvered Flat Glass Mirror
- ASTM-C1505 - Standard Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading
- ASTM-C1509 - Standard Specification for Beaded Process Glass Pipe and Fittings (Withdrawn 2019)
- ASTM-C1510 - Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
- ASTM-C1545 - Practice for Dispersing Pigments and Other Materials into Water-Based Suspensions with a High Intensity Mixer
- ASTM-C158 - Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM-C1605 - Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry
- ASTM-C1606 - Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
- ASTM-C1607 - Standard Test Method for Determination of “Microwave Safe for Reheating” for Ceramicware
- ASTM-C162 - Standard Terminology of
Glass and Glass Products - ASTM-C1648 - Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
- ASTM-C1649 - Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
- ASTM-C1650 - Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated
- ASTM-C1651 - Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
- ASTM-C1652 - Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids
- ASTM-C169 - Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
- ASTM-C1870 - Standard Test Method for Determination of Impact Diameter from Falling Ball on Ceramic Tile
- ASTM-C1895 - Standard Test Method for Determination of Mohs Scratch Hardness
- ASTM-C1900 - Standard Practice for Weathering and Evaluation of Laminated Glass
- ASTM-C1901 - Standard Test Method for Measuring Optical Retardation in Flat Architectural Glass
- ASTM-C1908 - Standard Test Method for Pummel Adhesion Testing of Two-ply Laminated Architectural Glass
- ASTM-C1914 - Standard Test Method for Bake and Boil Testing of Laminated Glass
- ASTM-C224 - Standard Practice for Sampling Glass Containers
- ASTM-C225 - Standard Test Methods for Resistance of Glass Containers to Chemical Attack
- ASTM-C242 - Standard Terminology of Ceramic Whitewares and Related Products
- ASTM-C313 - Method of Test for Adherence of Porcelain Enamel and Ceramic Coatings to Sheet Metal (Withdrawn 1989)
- ASTM-C322 - Standard Practice for Sampling Ceramic Whiteware Clays
- ASTM-C323 - Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays
- ASTM-C324 - Standard Test Method for Free Moisture in Ceramic Whiteware Clays
- ASTM-C325 - Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays
- ASTM-C326 - Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
- ASTM-C329 - Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
- ASTM-C336 - Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
- ASTM-C338 - Standard Test Method for Softening Point of Glass
- ASTM-C347 - Method of Test for Reflectivity and Coefficient of Scatter of White Porcelain Enamels
- ASTM-C368 - Standard Test Method for Impact Resistance of Ceramic Tableware
- ASTM-C370 - Standard Test Method for Moisture Expansion of Fired Whiteware Products
- ASTM-C371 - Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
- ASTM-C372 - Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
- ASTM-C373 - Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products
- ASTM-C408 - Standard Test Method for Thermal Conductivity of Whiteware Ceramics
- ASTM-C424 - Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
- ASTM-C429 - Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
- ASTM-C482 - Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
- ASTM-C483 - Standard Test Method for Electrical Resistance of Conductive Ceramic Tile (Withdrawn 2004)
- ASTM-C484 - Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
- ASTM-C485 - Standard Test Method for Measuring Warpage of Ceramic Tile
- ASTM-C499 - Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
- ASTM-C501 - Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
- ASTM-C502 - Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
- ASTM-C540 - Method of Test for Image Gloss of Porcelain Enamel Surfaces (Withdrawn 1989)
- ASTM-C554 - Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
- ASTM-C556 - Standard Test Method for Resistance of Overglaze Decorations to Attack by Detergents
- ASTM-C584 - Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
- ASTM-C598 - Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
- ASTM-C599 - Standard Specification for Conical Process Glass Pipe and Fittings (Withdrawn 2002)
- ASTM-C600 - Standard Test Method of Thermal Shock Test on Glass Pipe (Withdrawn 2019)
- ASTM-C601 - Standard Test Method for Pressure Test on Glass Pipe (Withdrawn 2019)
- ASTM-C609 - Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
- ASTM-C623 - Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
- ASTM-C627 - Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
- ASTM-C648 - Standard Test Method for Breaking Strength of Ceramic Tile
- ASTM-C650 - Standard Test Method for Resistance of Ceramic Tile to Chemical Substances
- ASTM-C657 - Standard Test Method for D-C Volume Resistivity of Glass
- ASTM-C674 - Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
- ASTM-C675 - Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
- ASTM-C676 - Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
- ASTM-C678 - Test Method for Determination of Particle Size Distribution of Alumina or Quartz Using Centrifugal Sedimentation
- ASTM-C689 - Standard Test Method for Modulus of Rupture of Unfired Clays
- ASTM-C690 - Standard Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique
- ASTM-C693 - Standard Test Method for Density of Glass by Buoyancy
- ASTM-C721 - Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
- ASTM-C724 - Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
- ASTM-C729 - Standard Test Method for Density of Glass by the Sink-Float Comparator
- ASTM-C730 - Standard Test Method for
Knoop Indentation Hardness of Glass - ASTM-C735 - Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers
- ASTM-C738 - Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
- ASTM-C770 - Standard Test Method for Measurement of Glass Stress—Optical Coefficient
- ASTM-C773 - Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
- ASTM-C775 - Standard Method for Particle-Size Analysis of Whiteware Clays (Withdrawn 2002)
- ASTM-C777 - Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
- ASTM-C798 - Method of Test for Color Permanency of Glazed Ceramic Tile (Withdrawn 1986)
- ASTM-C812 - Method of Test for Hydrophobic Contamination on Glass by Water Condensation (Withdrawn 1985)
- ASTM-C813 - Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
- ASTM-C824 - Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
- ASTM-C829 - Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
- ASTM-C837 - Standard Test Method for Methylene Blue Index of Clay
- ASTM-C848 - Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance
- ASTM-C849 - Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
- ASTM-C866 - Standard Test Method for Filtration Rate of Ceramic Whiteware Clays
- ASTM-C867 - Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)
- ASTM-C895 - Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
- ASTM-C912 - Standard Practice for Designing a Process for Cleaning Technical Glasses
- ASTM-C925 - Standard Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
- ASTM-C927 - Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
- ASTM-C949 - Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
- ASTM-C958 - Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
- ASTM-C965 - Standard Practice for Measuring Viscosity of Glass Above the Softening Point
- ASTM-C978 - Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
- ASTM-C988 - Test Method for Adherence of Porcelain Enamel Cover Coats Direct-to-Steel (Withdrawn 1990)
- ASTM-D116 - Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
- ASTM-D1829 - Standard Test Method for Electrical Resistance of Ceramic Materials at Elevated Temperatures (Withdrawn 2001)
- ASTM-D2442 - Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
- ASTM-D2757 - Standard Specification for Impervious Steatite Ceramics for Electrical and Electronic Applications (Withdrawn 2001)
- ASTM-F105 - Standard Specification for Type 58 Borosilicate Sealing Glass
- ASTM-F109 - Standard Terminology Relating to Surface Imperfections on Ceramics
- ASTM-F14 - Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal
- ASTM-F140 - Standard Practice for
Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods - ASTM-F144 - Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
- ASTM-F218 - Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
- ASTM-F356 - Specification for Beryllia Ceramics for Electronic and Electrical Applications (Withdrawn 2001)
- ASTM-F394 - Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)
- ASTM-F417 - Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
- ASTM-F77 - Test Method for Apparent Density of Ceramics for Electron Device and Semiconductor Application (Withdrawn 2001)
- ASTM-F79 - Standard Specification for Type 101 Sealing Glass
- ASTM-F865 - Test Methods for Gross Camber of Ceramic Substrates for Thick Film Applications (Withdrawn 2001)