Document Center List of Standards on Construction Materials And Building (Vocabularies)
ICS Code 01.040.91
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C11 - Standard Terminology Relating to Gypsum and Related Building Materials and Systems
- ASTM-C1154 - Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products
- ASTM-C1180 - Standard Terminology of Mortar and Grout for Unit Masonry
- ASTM-C119 - Standard Terminology Relating to Dimension Stone
- ASTM-C1209 - Standard Terminology of Concrete Masonry Units and Related Units (Withdrawn 2009)
- ASTM-C1213 - Standard Terminology Relating to Precast Concrete Products (Withdrawn 2001)
- ASTM-C1232 - Standard Terminology for Masonry
- ASTM-C168 - Standard Terminology Relating to Thermal Insulation
- ASTM-C294 - Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
- ASTM-C51 - Standard Terminology Relating to Lime and Limestone (as used by the Industry)
- ASTM-C634 - Standard Terminology Relating to Building and Environmental Acoustics
- ASTM-C717 - Standard Terminology of Building Seals and Sealants
- ASTM-C896 - Standard Terminology Relating to Clay Products
- ASTM-C904 - Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
- ASTM-D1079 - Standard Terminology Relating to Roofing and Waterproofing
- ASTM-D2946 - Standard Terminology for Asbestos and Asbestos–Cement Products (Withdrawn 2022)
- ASTM-D7712 - Standard Terminology for Sampling and Analysis of Asbestos
- ASTM-E1480 - Standard Terminology of Facility Management (Building-Related)
- ASTM-E1481 - Standard Terminology of Railing Systems and Rails for Buildings
- ASTM-E1749 - Standard Terminology Relating to Rigid Wall Relocatable Shelters
- ASTM-E2110 - Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
- ASTM-E2114 - Standard Terminology for Sustainability Relative to the Performance of Buildings
- ASTM-E2151 - Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings (Withdrawn 2019)
- ASTM-E2265 - Standard Terminology for Anchors and Fasteners in Concrete and Masonry
- ASTM-E631 - Standard Terminology of Building Constructions
- ASTM-E833 - Standard Terminology of Building Economics
BSI:
- BS-2655-9 - Specification for lifts, escalators, passenger conveyors and paternosters. Definitions
- BS-2787 - Glossary of terms for concrete and reinforced concrete
- BS-3533 - Glossary of thermal insulation terms
- BS-3810-8 - Glossary of terms used in materials handling. Terms used in connection with lifts, lifting platforms and inclined haulages
- BS-4049 - Glossary of terms applicable to internal plastering, external rendering and floor screeding
- BS-4340 - Glossary of formwork terms
- BS-4643 - Glossary of terms relating to joints and jointing in building
- BS-4949 - Glossary of terms relating to building performance
- BS-6100-0 - Building and civil engineering. Vocabulary
- BS-6100-1 - Building and civil engineering. Vocabulary
- BS-6100-10 - Building and civil engineering. Vocabulary. Contract terms
- BS-6100-1.0 - Glossary of building and civil engineering terms. General and miscellaneous. General
- BS-6100-11 - Building and civil engineering. Vocabulary
- BS-6100-1.1 - Glossary of building and civil engineering terms. General and miscellaneous. Types of building
- BS-6100-12 - Building and civil engineering. Vocabulary
- BS-6100-1.5.1 - Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Co-ordination of dimensions. Tolerances and accuracy
- BS-6100-1.5.2 - Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Jointing
- BS-6100-1.5.3 - Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Setting out and measurement
- BS-6100-1.7.1 - Glossary of building and civil engineering terms. General and miscellaneous. Characteristics and performance. Performance
- BS-6100-1.7.2 - Glossary of building and civil engineering terms. General and miscellaneous. Characteristics and performance. Characteristics
- BS-6100-2 - Building and civil engineering. Vocabulary
- BS-6100-3.1 - Glossary of Building & Civil Engineering Terms, Services, Energy Sources & Distributio
- BS-6100-3.2.1 - Internal Communication, Glossary of Building & Civil Engineering Terms, Services, Inte
- BS-6100-3.2.2 - Internal Transport, Glossary of Building & Civil Engineering Terms, Services, Internal
- BS-6100-3.3 - Sanitation, Glossary of Building & Civil Engineering Terms, Services
- BS-6100-3.4 - Lighting, Glossary of Building & Civil Engineering Terms, Services
- BS-6100-4.4 - Glossary of building and civil engineering terms. Forest products. Carpentry and joinery
- BS-6100-4-4.4 - Glossary of building and civil engineering terms. Forest products. Carpentry and joinery
- BS-6100-6 - Building and civil engineering. Vocabulary
- BS-6100-6.1 - Glossary of building and civil engineering terms. Concrete and plaster. Binders
- BS-6100-6.2 - Glossary of building and civil engineering terms. Concrete and plaster. Concrete
- BS-6100-6.3 - Glossary of building and civil engineering terms. Concrete and plaster. Aggregates
- BS-6100-6.4 - Glossary of building and civil engineering terms. Concrete and plaster. Admixtures
- BS-6100-6.5 - Glossary of building and civil engineering terms. Concrete and plaster. Formwork
- BS-6100-6.6.1 - Glossary of building and civil engineering terms. Concrete and plaster. Products, applications and operations. Concrete and mortar
- BS-6100-6.6.2 - Glossary of building and civil engineering terms. Concrete and plaster. Products, applications and operations. Plaster
- BS-6100-7 - Building and civil engineering. Vocabulary
- BS-6100-9 - Building and civil engineering. Vocabulary
- BS-874 - Determining Thermal Insulating Properties With Definitions of Thermal Insulating Terms
- BS-EN-12056-1 - Gravity drainage systems inside buildings
- BS-EN-12216 - Shutters, external blinds, internal blinds. Terminology, glossary and definitions
- BS-EN-12216-TC - Tracked Changes. Shutters, external blinds, internal blinds. Terminology, glossary and definitions
- BS-EN-12433-1 - Industrial, commercial, and garage doors and gates. Terminology. Types of doors
- BS-EN-12433-2 - Industrial, commercial, and garage doors and gates. Terminology. Parts of doors
- BS-EN-12440 - Natural stone. Denomination criteria
- BS-EN-12440-TC - Tracked Changes. Natural stone. Denomination criteria
- BS-EN-12597 - Bitumen and bituminous binders. Terminology
- BS-EN-1264-1 - Water based surface embedded heating and cooling systems
- BS-EN-1264-1-TC - Tracked Changes. Water based surface embedded heating and cooling systems
- BS-EN-12665 - Light and lighting. Basic terms and criteria for specifying lighting requirements
- BS-EN-12665-TC - Tracked Changes. Light and lighting. Basic terms and criteria for specifying lighting requirements
- BS-EN-12670 - Natural stone. Terminology
- BS-EN-1304 - Clay roofing tiles and fittings. Product definitions and specifications
- BS-EN-13119 - Curtain walling. Terminology
- BS-EN-13119-TC - Tracked Changes. Curtain walling. Terminology
- BS-EN-1322 - Adhesives for tiles. Definitions and terminology
- BS-EN-13279-1 - Gypsum binders and gypsum plasters
- BS-EN-13318 - Screed material and floor screeds. Definitions
- BS-EN-13454-1 - Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate
- BS-EN-13707 - Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics
- BS-EN-13859-1 - Flexible sheets for waterproofing. Definitions and characteristics of underlays
- BS-EN-13888 - Grout for tiles. Requirements, evaluation of conformity, classification and designation
- BS-EN-13956 - Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and characteristics
- BS-EN-13967 - Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Definitions and characteristics
- BS-EN-13969 - Flexible sheets for waterproofing. Bitumen damp proof sheets including bitumen basement tanking sheets. Definitions and characteristics
- BS-EN-13970 - Flexible sheets for waterproofing. Bitumen water vapour control layers. Definitions and characteristics
- BS-EN-13984 - Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics
- BS-EN-14076 - Timber stairs. Terminology
- BS-EN-14190 - Gypsum board products from reprocessing. Definitions, requirements and test methods
- BS-EN-14394 - Heating boilers. Heating boilers with forced draught Burners. Nominal heat output not exceeding 10 MW and maximum operating temperature of 110C
- BS-EN-14487-1 - Sprayed concrete
- BS-EN-14511-1 - Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors
- BS-EN-14511-1-TC - Tracked Changes. Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors
- BS-EN-14618 - Agglomerated stone. Terminology and classification
- BS-EN-14909 - Flexible sheets for waterproofing. Plastic and rubber damp proof courses. Definitions and characteristics
- BS-EN-1504-1 - Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity
- BS-EN-1504-10 - Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity
- BS-EN-1504-10-TC - Tracked Changes. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity
- BS-EN-1504-2 - Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity
- BS-EN-1504-3 - Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity
- BS-EN-1504-9 - Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity
- BS-EN-15167-1 - Ground granulated blast furnace slag for use in concrete, mortar and grout
- BS-EN-15900 - Energy efficiency services. Definitions and requirements
- BS-EN-16510-1 - Residential solid fuel burning appliances
- BS-EN-16572 - Conservation of cultural heritage. Glossary of technical terms concerning mortars for masonry, renders and plasters used in cultural heritage
- BS-EN-16687 - Construction products. Assessment of release of dangerous substances. Terminology
- BS-EN-235 - Wallcoverings. Vocabulary and symbols
- BS-EN-26927 - Building construction. Jointing products. Sealants. Vocabulary
- BS-EN-303-1 - Heating boilers
- BS-EN-303-1-TC - Tracked Changes. Heating boilers
- BS-EN-303-5 - Heating boilers
- BS-EN-459-1 - Building lime
- BS-EN-520 - Gypsum plasterboards. Definitions, requirements and test methods
- BS-EN-607 - Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
- BS-EN-934-2 - Admixtures for concrete, mortar and grout
- BS-EN-ISO-29464 - Cleaning of air and other gases. Terminology
- BS-EN-ISO-6927 - Buildings and civil engineering sealants. Vocabulary
- BS-EN-ISO-6927-TC - Tracked Changes. Buildings and civil engineering sealants. Vocabulary
- BS-EN-ISO-9288-TC - Tracked Changes. Thermal insulation. Heat transfer by radiation. Vocabulary
- BS-EN-ISO-9346 - Hygrothermal performance of buildings and building materials. Physical quantities for mass transfer. Vocabulary
- BS-ISO-11886 - Building construction machinery and equipment. Pile driving and extracting equipment. Terminology and commercial specifications
- BS-ISO-13006 - Ceramic tiles. Definitions, classification, characteristics and marking
- BS-ISO-13105-1 - Building construction machinery and equipment. Machinery for concrete surface floating and finishing
- BS-ISO-15688 - Road construction and maintenance equipment. Soil stabilizers. Terminology and commercial specifications
- BS-ISO-16039 - Road construction and maintenance equipment. Slipform pavers. Definitions and commercial specifications
- BS-ISO-16818 - Building environment design. Energy efficiency. Terminology
- BS-ISO-17740-1 - Building construction machinery and equipment. Concrete placing systems for stationary equipment
- BS-ISO-19711-1 - Building construction machinery and equipment. Truck mixers
- BS-ISO-19720-1 - Building construction machinery and equipment. Plants for the preparation of concrete and mortar
- BS-ISO-22496 - Windows and pedestrian doors. Vocabulary
- BS-ISO-29464 - Cleaning of air and other gases. Terminology
- BS-ISO-6243 - Climatic data for building design. Proposed system of symbols
- BS-ISO-6707-1 - Buildings and civil engineering works. Vocabulary
- BS-ISO-6707-2 - Buildings and civil engineering works. Vocabulary
- BS-ISO-6707-2-TC - Tracked Changes. Buildings and civil engineering works. Vocabulary
- BS-ISO-6707-3 - Buildings and civil engineering works. Vocabulary
- BS-ISO-6707-3-TC - Tracked Changes. Buildings and civil engineering works. Vocabulary
- BS-ISO-7078 - Buildings and civil engineering works. Procedures for setting out, measurement and surveying. Vocabulary
- DD-ENV-1504-9 - Products & Systems for the Protection & Repair of Concrete Structures, Definitions, Re
- PAS-14191 - Built environment. Management and operation of interconnected construction data dictionaries. Specification
- PD-CEN-16395 - Gas Infrastructure. CEN/TC 234 Pressure Definitions. Guideline Document
- PD-ISO-21932 - Sustainability in buildings and civil engineering works. A review of terminology
IEC:
- IEC-50(845) - International Electrotechnical Vocabulary. Lighting
- IEC-60050-845 - International Electrotechnical Vocabulary (IEV) - Part 845: Lighting
ISO:
- ISO-11375 - Building construction machinery and equipment - Terms and definitions
- ISO-11886 - Building construction machinery and equipment - Pile driving and extracting equipment - Terminology and commercial specifications
- ISO-13006 - Ceramic tiles - Definitions, classification, characteristics and marking
- ISO-13105-1 - Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 1: Terms and commercial specifications
- ISO-15688 - Road construction and maintenance equipment - Soil stabilizers - Terminology and commercial specifications
- ISO-15689 - Road construction and maintenance equipment -- Powder binder spreaders -- Terminology and commercial specifications
- ISO-16039 - Road construction and maintenance equipment - Slipform pavers - Definitions and commercial specifications
- ISO-16039-AM1 - - Amendment 1
- ISO-16818 - Building environment design - Energy efficiency - Terminology
- ISO-17740-1 - Building construction machinery and equipment - Concrete placing systems for stationary equipment - Part 1: Terminology and commercial specifications
- ISO-1791 - Building construction -- Modular co-ordination -- Vocabulary
- ISO-1803 - Building construction -- Tolerances -- Expression of dimensional accuracy -- Principles and terminology
- ISO-1804 - Doors -- Terminology
- ISO-18650-1 - Building construction machinery and equipment - Concrete mixers - Part 1: Commercial specifications
- ISO-19711-1 - Building construction machinery and equipment - Truck mixers - Part 1: Terminology and commercial specifications
- ISO-19720-1 - Building construction machinery and equipment - Plants for the preparation of concrete and mortar - Part 1: Terminology and commercial specifications
- ISO-21932 - Sustainability in buildings and civil engineering works - A review of terminology
- ISO-22496 - Windows and pedestrian doors - Vocabulary
- ISO-2444 - Joints in building -- Vocabulary
- ISO-29464 - Cleaning of air and other gases - Terminology
- ISO-3258 - Air distribution and air diffusion -- Vocabulary
- ISO-3649 - Cleaning equipment for air or other gases -- Vocabulary
- ISO-3880-1 - Building construction -- Stairs -- Vocabulary -- Part 1
- ISO-6707-1 - Buildings and civil engineering works - Vocabulary - Part 1: General terms
- ISO-6707-2 - Buildings and civil engineering works - Vocabulary - Part 2: Contract and communication terms
- ISO-6707-3 - Buildings and civil engineering works - Vocabulary - Part 3: Sustainability terms
- ISO-6707-4 - Buildings and civil engineering works - Vocabulary - Part 4: Facility management terms
- ISO-6927 - Building and civil engineering sealants - Vocabulary
- ISO-7078 - Buildings and civil engineering works - Procedures for setting out, measurement and surveying - Vocabulary
- ISO-8930 - General principles on reliability for structures - Vocabulary
Other SDOs:
- DIN-EN-12665 - Light and lighting - Basic terms and criteria for specifying lighting requirements
- DIN-EN-12809 - Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods; German version EN 12809:2001 + A1:2004
- DIN-EN-1304 - Clay roofing tiles and fittings - Product definitions and specifications; German version EN 1304:2013
- DIN-EN-13263-1 - Part 1: Definitions, Requirements & Conformity Criteria, Silica Fume for Concrete
- DIN-EN-13279-1 - Gypsum binders and gypsum plasters - Part 1: Definitions and requirements; German version EN 13279-1:2008
- DIN-EN-13454-1 - Part 1: Definitions & Requirements, Binders, Composite Binders & Factory-Made Mixtures
- DIN-EN-13707 - Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics; German version EN 13707:2013
- DIN-EN-13859-1 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing; German version EN 13859-1:2014
- DIN-EN-13859-2 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls; German version EN 13859-2:2014
- DIN-EN-13888 - Grouts for Tiles - Requirements, Evaluation of Conformity, Classification & Designatio
- DIN-EN-13956 - Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics; German version EN 13956:2012
- DIN-EN-13967 - Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics; German version EN 13967:2012+A1:2017
- DIN-EN-13969 - Flexible Sheets for Waterproofing - Bitumen Damp Proof Sheets Including Bitumen Baseme
- DIN-EN-13970 - Flexible Sheets for Waterproofing, Bitumen Water Vapour Control Layers, Definitions &
- DIN-EN-13970/A1 - Flexible Sheets for Waterproofing - Bitumen Water Vapour Control Layers - Definitions
- DIN-EN-13984 - Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics; German version EN 13984:2013
- DIN-EN-13984/A1 - Flexible Sheets for Waterproofing - Plastic & Rubber Vapour Control Layers - Definiti
- DIN-EN-14190 - Gypsum board products from reprocessing - Definitions, requirements and test methods; German version EN 14190:2014
- DIN-EN-14487-1 - Part 1: Definitions, Specifications & Conformity, Sprayed Concrete
- DIN-EN-14909 - Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
- DIN-EN-14967 - Flexible Sheets for Waterproofing - Bitumen Damp Proof Courses - Definitions & Charact
- DIN-EN-1504-1 - Part 1: Definitions, Products & Systems for the Protection & Repair of Concrete Struct
- DIN-EN-1504-10 - Part 10: Site Application of Products & Systems & Quality Control of the Works, Produc
- DIN-EN-1504-2 - Part 2: Surface Protection Systems for Concrete, Products & Systems for the Protectio
- DIN-EN-1504-3 - Part 3: Structural & Non-Structural Repair, Products & Systems for the Protection & Re
- DIN-EN-1504-6 - Part 6: Anchoring of Reinforcing Steel Bar, Products & Systems for the Protection & Re
- DIN-EN-1504-7 - Part 7: Reinforcement Corrosion Protection, Products & Systems for the Protection & Re
- DIN-EN-15221-1 - Part 1: Terms & Definitions, Facility Management
- DIN-EN-520 - Gypsum Plasterboards - Definitions, Requirements & Test Methods
- DIN-EN-607 - Eaves Gutters & Fittings Made of PVC-U, Definitions, Requirements & Testing
- DIN-EN-934-2/A1 - Amendment 1: Admixtures for Concrete, Mortar & Grout - Concrete Admixtures, Part 2: De
- DIN-EN-934-2/A2 - Amendment 2: Admixtures for Concrete, Mortar & Grout - Part 2: Concrete Admixtures -
- DIN-EN-934-3 - Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
- EN-12440 - Natural Stone, Denomination Criteria
- EN-12597 - Bitumen and bituminous binders - Terminology
- EN-1264-1 - Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols
- EN-12665 - Light and lighting - Basic terms and criteria for specifying lighting requirements
- EN-12670 - Natural stone - Terminology
- EN-1304 - Clay roofing tiles and fittings - Product definitions and specifications
- EN-13119 - Curtain walling - Terminology
- EN-13263-1 - Part 1: Definitions, Requirements & Conformity Criteria, Silica Fume for Concrete
- EN-13279-1 - Gypsum Binders & Gypsum Plasters, Definitions & Requirements
- EN-13454-1 - Part 1: Definitions & Requirements, Binders, Composite Binders & Factory-Made Mixtures
- EN-13707 - Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
- EN-13859-1 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
- EN-13888 - Grouts for Tiles - Requirements, Evaluation of Conformity, Classification & Designatio
- EN-13956 - Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
- EN-13967 - Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
- EN-13969 - Flexible Sheets for Waterproofing - Bitumen Damp Proof Sheets Including Bitumen Baseme
- EN-13970 - Flexible Sheets for Waterproofing, Bitumen Water Vapour Control Layers, Definitions &
- EN-13970/A1 - Flexible Sheets for Waterproofing - Bitumen Water Vapour Control Layers - Definitions
- EN-13984 - Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
- EN-13984/A1 - Flexible Sheets for Waterproofing - Plastic and Rubber Vapour Control Layers - Definiti
- EN-14076 - Timber stairs - Terminology
- EN-14190 - Gypsum board products from reprocessing - Definitions, requirements and test methods
- EN-14394 - Heating Boilers - Heating Boilers With Forced Draught Burners - Nominal Heat Output No
- EN-14487-1 - Part 1: Definitions, Specifications & Conformity, Sprayed Concrete
- EN-14511-1 - Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions
- EN-14618 - Agglomerated Stone - Terminology & Classification
- EN-14909 - Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
- EN-1504-1 - Products & Systems for the Protection & Repair of Concrete Structures, Definitions, Re
- EN-1504-10 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
- EN-1504-2 - Part 2: Surface Protection Systems for Concrete, Products & Systems for the Protectio
- EN-1504-3 - Part 3: Structural & Non-Structural Repair, Products & Systems for the Protection & Re
- EN-1504-9 - Products & Systems for the Protection & Repair of Concrete Structures, Definitions, Re
- EN-15167-1 - Part 1: Definitions, Specifications & Conformity Criteria, Ground Granulated Blast Fur
- EN-15221-1 - Part 1: Terms & Definitions, Facility Management
- EN-15900 - Energy Efficiency Services - Definitions & Requirements
- EN-16510-1 - Residential solid fuel burning appliances - Part 1: General requirements and test methods
- EN-16572 - Conservation of cultural heritage - Glossary of technical terms concerning mortars for masonry, renders and plasters used in cultural heritage
- EN-16687 - Construction products - Assessment of release of dangerous substances - Terminology
- EN-303-5 - Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
- EN-480-8 - Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content
- EN-520 - Gypsum Plasterboard, Definitions, Requirements & Test Methodods
- EN-607 - Eaves Gutters & Fittings Made of PVC-U, Definitions, Requirements & Testing
- EN-934-2 - Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
- EN-934-2/A1 - Amendment 2: Admixtures for Concrete, Mortar & Grout - Concrete Admixtures, Part 2: De
- EN-934-2/A2 - Admixtures for Concrete, Mortar and Grout - Part 2: Concrete Admixtures - Definitions, R
- EN-ISO-6927 - Buildings and civil engineering works - Sealants - Vocabulary (ISO 6927:2012)
- EN-ISO-9346 - Hygrothermal Performance of Buildings & Building Materials, Physical Quantities for M
- JIS-A-1526 - Doors terminology
- SIS-CEN/TR-16395 - Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document
- SIS-CEN/TR-16912 - Guidelines for a procedure to support the European standardization of cements
- SIS-ISO/TR-21932 - Sustainability in buildings and civil engineering works - A review of terminology (ISO/TR 21932:2013, IDT)
- SS-EN-12056-1 - Gravity drainage systems inside buildings - Part 1: General and performance requirements
- SS-EN-12056-2 - Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation
- SS-EN-12056-3 - Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation
- SS-EN-12056-4 - Gravity drainage systems inside buildings - Part 4: Wastewater lifting plants - Layout and calculation
- SS-EN-12056-5 - Gravity drainage systems inside buildings - Part 5: Installation and testing, instructions for operation, maintenance and use
- SS-EN-12216 - Shutters, external blinds, internal blinds - Terminology, glossary and definitions
- SS-EN-12433-1 - Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors
- SS-EN-12433-2 - Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors
- SS-EN-12440 - Natural stone - Denomination criteria
- SS-EN-12519 - Windows and pedestrian doors - Terminology
- SS-EN-12597 - Bitumen and bituminous binders - Terminology
- SS-EN-1264-1 - Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols
- SS-EN-12665 - Light and lighting - Basic terms and criteria for specifying lighting requirements
- SS-EN-12670 - Natural stone - Terminology
- SS-EN-12859 - Gypsum blocks - Definitions, requirements and test methods
- SS-EN-12859-AM1 - Gypsum blocks - Definitions, requirements and test methods
- SS-EN-13035-3 - Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
- SS-EN-1304 - Clay roofing tiles and fittings - Product definitions and specifications
- SS-EN-1304-AM1 - Clay roofing tiles for discontinuous laying - Products definitions and specifications
- SS-EN-13119 - Curtain walling - Terminology
- SS-EN-1322 - Adhesives for tiles - Definitions and terminology
- SS-EN-1322-AM1 - Adhesives for tiles - Definitions and terminology
- SS-EN-13279-1 - Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
- SS-EN-13279-2 - Gypsum binders and gypsum plasters - Part 2: Test methods
- SS-EN-13318 - Screed material and floor screeds - Definitions
- SS-EN-13445 - Unfired pressure vessels
- SS-EN-13454-1 - Binders, composite binders and factory made mixtures for floor screeds based on calcium sulphate - Part 1: Definitions and requirements
- SS-EN-13454-2 - Binders for floor screeds based on calcium sulphate - Part 2: Test methods
- SS-EN-13707 - Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
- SS-EN-13707-AM1 - Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
- SS-EN-13859-1 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
- SS-EN-13859-2 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
- SS-EN-13888 - Grout for tiles - Requirements, evaluation of conformity, classification and designation
- SS-EN-13888-1 - Grouts for ceramic tiles - Part 1: Requirements, classification, designation, marking and labelling
- SS-EN-13950 - Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods
- SS-EN-13956 - Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
- SS-EN-13967 - Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
- SS-EN-13967-AM1 - Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
- SS-EN-13969 - Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
- SS-EN-13969-AM1 - Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics
- SS-EN-13970 - Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
- SS-EN-13970-AM1 - Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics
- SS-EN-13984 - Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
- SS-EN-13984-AM1 - Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics
- SS-EN-13986 - Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
- SS-EN-14016-1 - Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements
- SS-EN-14037-1 - Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements
- SS-EN-14076 - Timber stairs - Terminology
- SS-EN-14190 - Gypsum board products from reprocessing - Definitions, requirements and test methods
- SS-EN-14394 - Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 degrees Celsius
- SS-EN-14487-1 - Sprayed concrete - Part 1: Definitions, specifications and conformity
- SS-EN-14511-1 - Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 1: Terms and definitions
- SS-EN-14618 - Agglomerated stone - Terminology and classification
- SS-EN-14909 - Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
- SS-EN-1504-10 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
- SS-EN-1504-2 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
- SS-EN-1504-3 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
- SS-EN-1504-9 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems
- SS-EN-15167-1 - Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
- SS-EN-15221-1 - Facility Management - Part 1: Terms and definitions
- SS-EN-15283-1 - Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
- SS-EN-15283-2 - Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
- SS-EN-1555-1 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
- SS-EN-15900 - Energy efficiency services - Definitions and requirements
- SS-EN-16510-1 - Residential solid fuel burning appliances - Part 1: General requirements and test methods
- SS-EN-16572 - Conservation of cultural heritage - Glossary of technical terms concerning mortars for masonry, renders and plasters used in cultural heritage
- SS-EN-16687 - Construction products - Assessment of release of dangerous substances - Terminology
- SS-EN-1991-2 - Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges
- SS-EN-235 - Wallcoverings - Vocabulary and symbols
- SS-EN-303-5 - Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
- SS-EN-459-1 - Building lime - Part 1: Definitions, specifications and conformity criteria
- SS-EN-480-8 - Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content
- SS-EN-520 - Gypsum plasterboards - Definitions, requirements and test methods
- SS-EN-607 - Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
- SS-EN-934-2 - Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
- SS-EN-934-2-AM2 - Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
- SS-EN-934-3 - Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
- SS-EN-ISO-29464 - Cleaning of air and other gases - Terminology (ISO 29464:2017)
- SS-EN-ISO-41011 - Facility management - Vocabulary (ISO 41011:2017)
- SS-EN-ISO-6927 - Buildings and civil engineering sealants - Vocabulary (ISO 6927:2021)
- SS-EN-ISO-9288 - Thermal insulation - Heat transfer by radiation - Vocabulary (ISO 9288:2022)
- SS-EN-ISO-9346 - Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary (ISO 9346:2007)
- SS-ISO-11375 - Building construction machinery and equipment - Terms and definitions (ISO 11375:1998, IDT)
- SS-ISO-11886 - Building construction machinery and equipment Pile driving and extracting equipment Terminology and commercial specifications (ISO 11886:2002, IDT)
- SS-ISO-13105-1 - Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 1: Terms and commercial specifications (ISO 13105-1:2014, IDT)
- SS-ISO-13442 - Tyres and rims for construction machines (ISO 13442:2004, IDT)
- SS-ISO-15688 - Road construction and maintenance equipment - Soil stabilizers - Terminology and commercial specifications (ISO 15688:2012, IDT)
- SS-ISO-15689 - Road construction and maintenance equipment - Powder binder spreaders - Terminology and commercial specifications (ISO 15689:2003, IDT)
- SS-ISO-16039 - Road construction and maintenance equipment Slipform pavers Definitions and commercial specifications (ISO 16039:2004, IDT)
- SS-ISO-16818 - Building environment design - Energy efficiency - Terminology (ISO 16818:2008, IDT)
- SS-ISO-17740-1 - Building construction machinery and equipment - Concrete placing systems for stationary equipment - Part 1: Terminology and commercial specifications (ISO 17740-1:2015, IDT)
- SS-ISO-1803 - Building construction - Tolerances - Expression of dimensional accuracy - Principles and terminology
- SS-ISO-1803-1 - Building construction - Tolerances - Vocabulary -Part 1: General terms
- SS-ISO-1803-2 - Tolerances for building - Vocabulary - Part 2: Derived terms
- SS-ISO-1804 - Doors - Terminology
- SS-ISO-18650-1 - Building construction machinery and equipment Concrete mixers Part 1: Commercial specifications (ISO 18650-1:2021, IDT)
- SS-ISO-19711-1 - Building construction machinery and equipment - Truck mixers - Part 1: Terminology and commercial specifications (ISO 19711-1:2018, IDT)
- SS-ISO-19720-1 - Building construction machinery and equipment - Plants for the preparation of concrete and mortar - Part 1: Terminology and commercial specifications (ISO 19720-1:2017, IDT)
- SS-ISO-6707-1 - Buildings and civil engineering works - Vocabulary - Part 1: General terms (ISO 6707-1:2020, IDT)
- SS-ISO-6707-2 - Buildings and civil engineering works - Vocabulary - Part 2: Contract and communication terms (ISO 6707-2:2017, IDT)
- SS-ISO-6707-3 - Buildings and civil engineering works - Vocabulary - Part 3: Sustainability terms (ISO 6707-3:2017, IDT)
- SS-ISO-7078 - Building construction - Procedures for setting out, measurement and surveying - Vocabulary and guidance notes
- UNE-EN-16515 - Conservation of Cultural Heritage - Guidelines to characterize natural stone used in cultural heritage
- UNE-EN-16572 - Conservation of cultural heritage - Glossary of technical terms concerning mortars for masonry, renders and plasters used in cultural heritage